SPECIAL REPAIR TO BLDG NO T-85, T-95, T-407, T-390 AND T-399 AT TANGDHAR UNDER THE AOR OF GE 874 EWS.

Amount

Dismantling plain or corrugated steel sheeting any gauge thickness in roof covering/wall etc complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with tapping screws complete all as specified and directed.

All as per item No 2 above herein before but plain sheet

Demolition of cement concrete (Un-reinforced) in ground floors and paving n.exc 15 cm thickness below or above ground level complete all as specified.

Dismantling wall and ceiling board of any description including cover fillets complete all as specified.

M&L for 6mm thick veneered decorative plywood (05 Nos of ply) grade-01 (with BWR resin) with decorative face veneers on the one face fixed with nails to timber frame works fixed in wall/linings complete all as specified and directed.

M&L for 6mm thick veneered decorative plywood (05 Nos of ply) grade-01 (with BWR resin) with decorative face veneers on the one face fixed with nails to timber frame works fixed in ceiling etc complete all as specified and directed.

S&F second class hardwood plain fillets square, rectangular in section exc 13 Sqcm & not exc 25 Sqcm complete all as specified and directed

S&F second class hardwood plain fillets square, rectangular in section exc 6 Sqcm and not exc 13 Sqcm complete all as specified and directed.

Dismantling of timber scantlings 40 sq cm and over in sec, in any position, in unframed/framed work complete all as specified and directed.

M &L for second class soft wood as in scantling clean sawn fixed in position complete all as specified and directed.

M & L for second class soft wood as in scantling clean sawn fixed in position but except wood complete all as specified and directed.

Taking down of shutters of any description exc 2 Sqm each complete all as specified and directed.

Taking down chowkhats or frame exc. 1.5sqm and n.exc. 4 sqm each with shutter (without taking out shutters from the frame) complete all as specified and directed.

Taking down chowkhats or frame n.exc. 1.5sqm each with Shutter (without taking out shutters from the frame) complete all as specified and directed.

M&L for second class soft wood plain, solid straight chowkhat and frames, wrought framed rebated on the solid rounded or chamfered, put together with glue penned and joints complete all as specified and directed.

M&L for Glazed and Skelton shutters 2nd class soft wood, open rebated and prepared to receive glass, gauge etc (with sash bar) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc supplied and fixed to chowkhat, 30mm thick shutter for window and ventilator as specified in SSR Part-I , Section-8, clause 8.24 (b). complete all as specified and directed.

S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F factory made solid PVC moulded door shutter with particle board core 28 to 30mm thick (style) with 2, 4, or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification and drawing.

S&F for 100mm long stainless steel butt hinges medium weight cold rolled complete all as specified and directed.

S&F 200mm long aluminium alloy, anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F 150 mm long aluminium alloy, anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F 300mm long aluminium alloy anodized sliding door (bolt type) and fixing clips of sheets, cast of extruded sections and fixing bolts and sliding bolts of extruded section of cast-aluminium alloy complete all as specified and directed.

S&F aluminium handles, cast type, anodized 150mm long complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint including cleaning dusting of new or previously untreated, priming surfaces of wood /ply wood base surfaces for wall, door, window, ventilator and ceiling not otherwise described over 10cm width or girth complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint including preparation of old painted steel surfaces of any description over 10cm width or girth not otherwise described complete all as specified and directed.

Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work, complete all as specified and directed.

M&L for brick work with sub class 'B' brick straight or curved on plan exc 6m mean radios built in cement mortar 1:6. complete all as specified and directed.

M&L for brickwork with sub class ‘B’ bricks, straight or curved on plan to any radios in half brick thick walls built in CM 1:4 complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in Cement Mortar 1:4 complete all as specified and directed.

M&L for weather boarding of second class soft wood, clean sawn, plain, 20mm thick or feather edged 15 mm to 20mm thick and fixed with 30mm lap in repair to replace old or decayed boarding and removing from site complete all as specified and directed.

M & L for applying two coats of cement based paint over a coat primer on newly plastered or un plastered wall surface including preparation of surfaces complete all as specified and directed.

M&L for PCC 1:2:4, type B-1 (using 20mm graded aggregate) as in coping with necessary formwork complete all as specified and directed.

M&L for 75mm thick plain Cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) in sub base flooring all as specified and directed

M&L for 25mm thick cement concrete type B-1, 1:2:4 as in sub base under floor and finished rough surface complete all as specified and directed.

M&L for 15 mm thick screed bed in cement mortar 1:6 for laying floor finishes complete all as specified and directed.

M&L Non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm and n. exc 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface, complete all as specified and directed.

Glazed ceramic coloured tiles of size 450x350mm and 7mm thick as in vertical surfaces such as in skirting and dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10mm thick back coat layer in cement mortar 1:4, complete all as specified and directed.

M&L for vitrified ceramic tiles 10mm thick (square/rectangular) area of each tile n.exc 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface, complete all as specified and directed.

Dewatering/pumping/bailing out contaminated with waste material sludge from septic tank along with inlet outlet chamber of any capacity/depth by vehicle mounted sewage suction machine and disposing same out of cantonment area in a closed container including taking off manhole cover and putting back the same after cleaning./removing the liquid waste material of septic tanks and cutting hole through slap/ wall where required for inserting pipe and making good the same with cement mortar to match with existing surface to make hygienically fit, writing the date of cleaning of septic tank with black and white paint of size 150x 200 mm and finally spraying unslaked lime (bleaching powder ) dry around and over the septic tank all complete all as specified and directed.

Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Material and labour for providing precast RCC 1:1.5:3 type A-1 using 20mm graded mechanically crushed stone aggregate as in cover slab for man holes, drains , soak well etc and similar articles etc, set in CM 1:4 with plain faces including chamfered weathering throating etc including necessary form work complete all as specified and directed.

M&L for Chequered cement concrete tiles of size 20 cmX20 cm and 25 mm thick sat jointed and pointed in neat cement slurry in floor with grey cement and no pigments over and including 15 mm thick screed bed in CM (1:4) complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in plinth protection in subbase complete all as specified and directed.

Dismantling of CI or reinforced concrete/PVC/ drain pipe internal dia 100/75mm , jointed in cement mortar and taking out of trenches if required complete all as specified and directed.

S & F PVC (SWR) pipe 110mm bore single in any type with rubber ring joint laid in wall/trenches /floor complete all as specified and directed.

S & F PVC (SWR) pipe 75 mm bore single in any type with rubber ring joint laid in wall/trenches /floor complete all as specified and directed.

S & F PVC (SWR) bend any radios 110mm bore complete all as specified and directed.

S & F PVC (SWR) bend any radios 75mm bore complete all as specified and directed.

S & F in repair PVC (SWR)gully trap 125/110mm setting and jointing with solvent cement complete all as specified and directed.

S&F in repair Vitreous China squatting pane, Orissa pattern size 580 x 440mm plate with integral foot rest (excluding flushing cistern and flush pipe) including 'S' or 'P' trap and cement concrete bedding complete all as specified and directed.

S & F PVC (SWR) reducers 75/110mm bore complete all as specified and directed.

Supply and fix TMT mild steel bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

S&F in repair PVC valve less, syphonic action type flushing cistern, 10 ltr capacity low level, white, with inlet, ball valve, float and handle including brackets complete all as directed.

S&F in repair 32 mm Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm 45gms/40mm-60 gms) complete all as specified and directed.

Supply and fix in repair Chromium Plated bib taps, cast copper alloy, fancy type with capstan head, crutch or butterfly handle chromium plated, screwed down high pressure, screwed for iron pipe or for brass ferrule 15/20 mm dia bore, fixed complete all as specified and directed.

S&F in repair Pillar tap 15mm bore cast copper alloy, with capstain head chromium plated screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

Supply and fix in repair angular stop valves cast copper alloy, screwed down high pressure, fancy type with crunch or butterfly handle, chromium plated, screwed both ends for iron pipe or for unions, or for 15mm dia bore, complete all as specified and directed.

Supply and fix, towel rail 600 mm long (between flanges), 20mm dia, ‘D’ type, chromium plated brass, fixed to walls with screws and plastic cleats, fixed as in repairs, complete all as specified and directed.

Supply & fix in repair PVC connections of PTMT, non corrosive, with nuts & washers on both ends, 450mm long, suitable for 15mm dia bore pipe complete all as specified and directed.

Supply and fix in repair grating square (SLIT) 150mm size, of PTMT (Openable), fixed as in repairs, complete all as specified and directed.

Taking up or down steel tubing and connections, size 15 mm dia bore, including cleaning for re-fixing or removal to stores, complete all as specified and directed.

Taking up or down steel tubing and connections, size 20mm dia bore complete all as specified and directed..

Material and labour, galvanised steel water tubing, 'medium grade', with all fittings and fixed complete to wall and ceiling or laid under floor, 15 mm dia bore pipes, including cutting existing steel tubing & screwing, if required for alterations and additions, complete all as specified and directed.

Material and labour, galvanised steel water tubing, 'medium grade', with all fittings and fixed complete to wall and ceiling or laid under floor, 20 mm dia bore pipes, including cutting existing steel tubing & screwing, if required for alterations and additions, complete all as specified and directed.

Dismantling water tanks exc 500 and n exc 1000 ltr capacity complete all as specified and directed.

M&L for rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including float valve and fittings of 1000 ltrs capacity all as specified in SSR Part I, complete all as specified and directed.

S&F in repairs vitreous china wash basin, white, flat back, size 550x400mm excluding teps, waste chain 7 plug and porcelean stopper but including brackets.

S&F in repairs Vitreous china bowl urinal flat back, of size 465x355x265mm white (minimum), with grating and union for discharge pipe including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including discharge pipe of PVC 32mm dia complete all as specified and directed.

S&F Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed with 20mm dia complete all as specified and directed.

Dismantling wrought iron or mild steel /angle work of any description or in any position complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from any type of frames or stone, concrete or brick surrounds etc , glazed with putty or fixed with beads complete all as specified and as directed.

S&F Sheet glass ordinary quality 3mm thick, glazing with oil putty or wooden beads in squares not exceeding 0.50Sqm in each pane, in repairs, complete all as specified and as directed.

M&L for mild steel Fe -410-W(gde-E-250) Quality A Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces of any description over 10cm width or girth not otherwise described and complete all as specified and directed.

M&L for walling of random rubble stone uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and directed.

Description all as per item No 77 above but except stone.

M&L for brickwork with sub class ‘B’ bricks, straight or curved on plan to any radios in half brick thick walls built in CM 1:4 complete all as specified and directed.

M&L Non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm and n. exc 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface, complete all as specified and directed.

M&L for plain fillets rectangular or triangular in section clean sawn secured with nails or brads exceeding 3 sqcm & n exc 6 sqcm, second class soft wood (Kail) clean sawn complete all as specified and directed.

Taking down carefully copper/ aluminium unserviceable/ perished point wiring (light, fan, socket or power complete including fixture and fittings such as switches, ceiling roses, pandents, regulators, sockets, light fittings, removing material from site for taking credit etc and making good disturbed surfaces of wall, floors, complete all as specified and directed.

Taking down MCB DB's complete with MCB's/Isolator etc removing materials from site and making good disturbed surface of walls, floors etc. complete all as specified and directed.

M&L for point wiring for one light point/fan point controlled by one switch with 1.5 sqmm PVC FRLSH insulated un-sheathed copper conductor single core multi strand flexible cable and 1.5 sqmm PVC FRLSH insulated un-sheathed copper conductor single core multi stranded flexible cable (green colour) as earth lead in and including cable 1100 volts grade including casing and capping/conduit (ISI marked) including sunk cast iron/pressed steel terminal boxes, junction boxes, other boxes and sheet of suitable sizes for mounting of switches, sockets, fan regulators, light fittings etc. Covered with suitable plastic laminated sheet or PVC gang box 2 to 8 way as per site requirement including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified.

All as per item No 84 herein before but wiring with 1.5 sqmm copper wire ( FR-LS-H) and 1.5 sqmm earth wire for socket outlet 3 pin 5 amps on same board.

All as per item No 84 herein before but wiring with 1.5 sqmm copper wire ( FR-LS-H) and 1.5 sqmm earth wire for socket outlet 3 pin 5 amps on independent board.

All as per item No 84 herein before but wiring with 4 sqmm copper wire ( FR-LS-H) and 2.5 sqmm earth wire for socket outlet 6 pin 15 amps on independent board.

S&F switch piano flush button single pole, one way 5 amps complete all as specified and directed.

S& F of Socket outlet 2 in 1, 3 pin, 6A complete all as specified and directed.

S & F switch socket combination 2 in 1,5A, flush type complete all as specified and directed.

S & F switch socket combination 5 pin 16A, flush type complete all as specified and directed.

Supply and fix ceiling rose with earth terminal 2/3 connection, PVC/ polycarbonate, isolated body complete all as specified and directed.

S&F LED, 20 Watts, 4 ft, fittings complete with all accessories for mounting light fittings complete with earth terminal connection/ PVC/ polycarbonate, isolated body complete all as specified and directed.

M & L for lamp holder, PVC/Polycarbonate type with cord grip cap suitable for batten fittings complete all as specified and directed.

Supply and fix LED Bulb 9 Watt complete all as specified and directed.

S&F 09W/10W Bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F of distribution board single pole & neutral with 200 Amps rated bus bar, for double door IP-42 DB's ,made out of sheet steel enclosure, recessed type, factory made powder coated 8 way -240 volts suitable for housing MCB's and isolator's complete in all fixing material/accessories etc complete all as specified and directed.

S&F of distribution board single pole & neutral with 200 Amps rated bus bar, for double door IP-42 DB's ,made out of sheet steel enclosure, recessed type, factory made powder coated 4 way -240 volts suitable for housing MCB's and isolator's complete in all fixing material/accessories etc complete all as specified and directed.

S&F MCB's single pole 240 volts 6 to 32 Amps 10 KA 'C' curve series complete all as specified and directed.

S & F of MCB SPN, 240 volt, 32 Amp capacity, 10 KA, 'C' curve complete all as specified and directed.

Supply and Fixing 1100 Volts grade heavy duty cable PVC insulated multistranded aluminium conductor served with PVC tape and overall PVC sheathed in services connections suspended by insulating hanger not more than 1 mtr apart including 4mm dia GI suspension wire one twin core cable flat or circular of size 10 Sqmm 2 core including service bracket complete all as spd and as directed.

M & L for Earthing complete with galvanised steel earth plate electrode 60x60cmx6.3 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge lead of the plate not less than 1.5 mtr below normal ground level, connected galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in Electrical plate No 3 connected to earthing test point all as specified or indicated including testing on completion.

S&F of distribution board single pole & neutral with 200 Amps rated bus bar, for double door IP-42 DB's ,made out of sheet steel enclosure, recessed type, factory made powder coated 12 way -240 volts suitable for housing MCB's and isolator's complete in all fixing material/accessories etc complete all as specified and directed.

M/S GHULAM RUBANI & SONS (BID ID -3456994)

M/S GHULAM AHMAD BABA (BID ID -3463198)

M/S Thakur & Sons (BID ID -3463565)

Bidder Name

MIR HUSSAIN AND SONS

M/S GHULAM RUBANI & SONS

M/S Thakur & Sons

M/S GHULAM AHMAD BABA