PROVN OF TOILET BLOCK GALVALUME SHEET STORAGE SHED AND 5000 LTRS PVC WATER TANK AT CSD DEPOT UNDER GE MH AND RH KIRKEE

Amount

Surface dressing n exc 15 cm deep in hard/dense soil

Excavating in trenches, n exc1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits,manholes, pier holes, etc. nexc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil.

All as per item No.2 above but in soft /loose soil

All as per item No 2 above but in hard rock.

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out in hard/dense soil and removing surplus soil to a distance n exc 50 m and making good surface

Returning, filling including spreading levelling watering and well ramming in layers not exceeding 25 cm thick in each layer in any type of soil.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point

Spreading and levelling of soil layers n. exc 25cm thick for filling under floors.

Formwork to rough finished surfaces of soffits of suspended slabs such as roof slabs, floor slabs and similar work; not exceeding 200m thick (Horizontal or sloping) as directed

Formwork to edges of rough finished surfaces of concrete flats, treads, breaks in floors, and similar work exc. 10cm but n. exc 20cm vide as directed.

Formwork to chajjas and similar item including edges of rough finished flat surface of concrete, all as specified and directed.

S & F MS TMT bars 6 to 8mm dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping for cols, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

Ditto as Item No 12 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders.

M & L RCC 1:1.5:3 type A-1 using 20mm graded stone aggregate slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified and directed.

M & L for RCC 1:11/2 :3 type A-1 using 20mm graded aggregate as in chajjas all as specified and directed

M & L Cement concrete in foundations, filling and mass concrete 1:4:8 type D2 using 40 mm graded stone aggregates as in foundation and mass filling etc. all as specified and directed.

M & L Cement concrete Type B2, 1:2:4 (40mm graded aggregate) as in foundations, filling and mass-concrete

M & L providing precast cement concrete 1:2:4 type B1 using 20mm graded stone aggegates in set in CM 1:4 as in cover for slabs etc all as specified and directed

M & L mild steel rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates using any sections likeangle, Tee, Channel, flat etc (Fe-410-W, Gde E-250, Quality B

S & F Plates(plain or chequered)channels,square cut or notched(ordinary and counter sunk) forming holes,without any attachment [ Fe-410-W(Gde-E-25)quality-B]

S & F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete (Fe-410-W, Gde E 250, quality B)

S & F 1.25mm mild steel mild steel plain black sheet in hearths; covering to door shutters; covering to door chowkats (frames); chullah hoods; waters tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size, edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40mm lap joints or welded/riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required

S & F mild steel work in wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed. drilling holes, notching for wire, etc; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or Fe 310-0

S & F Mild steel screw bolts(machine made) with hexagonal or square heads at one end screwed the other, or scewed both ends, each scewed end to be fitted with washer and hexagonal or square nut, n exc 5cm long dia of neck 5-10mm.

S & F mild steel works in gate hooks and pintle hinges, hand made sliding bolts and similar articles conforming to Fe 290, Gde E 165

S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S & F 2mm thick fiber glass translucent corrugated sheeting with two corrugations side lab fixed with coach screw and washer in roof, wall etc

M & L Pre-cast cement concrete block masonry exc. 10 cm in width with solid blocks of type C1,1:3:6 using 20 mm graded aggregate, and setting in cement mortar 1:6 complete.

M & L Brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6

S & F Solid PVC door frame factory made of size 50mmx 47mm made out of 5mm PVC sheet single side prelaminated & edges will be painted to match, reinforced with MS Square tube jointed , supplying and fixing in opening complete all as specified and as directed .

Factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded coloured PVC ’C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and single side prelaminated PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of single side prelaminated PVC sheet to be fitted in the MS frame welded/ sealed into the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying and fixing in the frame at site as per specification complete all as specified and as directed.

S&F steel ventilator fixed type with glazing bars including half top portion hung shutter complete all as directed.

S&F 3.0mm thick frosted sheet glass ordinary quality and glazing with oil putty in square n. exc. 0.5sq.m in each pane complete all as specified.

S&F medium weight MS butt hinges 100mm long, all as specified and directed.

S&F 125mm long Aluminium handles, cast type, anodised all as specified and directed.

S & F Aluminium anodised barrel tower bolt of extruded section 200mm long all as specified and directed by Engineer - in - Charge .

M & L broken stone hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface

M & L 75mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base.

M & L Cement concrete type C-2, 1:3:6 (40mm graded aggregate), 75mm thick as in sub base.

M & L 25mm thick Cement Concrete 1:2:4 type B-0 using 12.5mm graded stone aggregates flooring finished even and rough to receive topping layer all as specified and directed.

M & L Cement concrete type B-2, 1:2:4 (40mm graded aggregate) 100mm thick as in flooring laid in alternate panels finished even and fair.

Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade `A', thickness of slab 100mm

Taking down cement plaste from brick or concrete surfaces including racking out joints, hacking for key and scrubbing down with water etc. Detto but cement or cement lime plaster, any description

M & L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even and fair all as specified.

M & L Rendering 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and fareall as specified and directed.

M & L rendering 15mm thick on internal surface on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth (without using extra lime or cement) as in vertical surfaces all as specified and directed

M & L rendering 15mm thick on external surfaces on fair faces of brick work or concrete surfaces in CM 1:4 (without using extra cement) as in vertical surfaces, all as specified and directed.

M&L rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:3 as in ceiling, soffit of slab, etc. complete all as specified.

M & L non Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) polished, light shade, area of each tile exc. 0.06 sqm but not exceeding 0.11 sqm, in floors etc. over 15mm thick screed bed for bedding layers CM 1 :6 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M & L coloured glzed ceramic tiles in vertical surface 350x250mmx7mm/450X350X7mm thick, as in skirting/dado over and incl 10mm thick rendering in CM 1:4 set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed.

M & L granite (of any type) work(table rubbed and polished) in step, jambs,pillaras, window-cills, cooking platforms and like in cement mortar(1:4) including pointing in white cement(1:2) using marble dust withadmixture of pigment to match with shade of granite.

Cutting chases,pinning in on brick/concrete walls making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades,shelves, lintels,etc; and cutting chases for concealed water tubing or concerled conduit wiring, etc; and making good, cutting not exc 10 cm girth.

M & M providing , cmeent concrete type B1 1:2:4(20 mm graded aggregte) as in roof kerbs or mud stopd rounded or chamfered on edges.

M & L Chequered cement concrete tiles 300mm X 300mm X 25mm thick, set jointed and pointed in neat cement slurry over 15mm thcik bedding in CM 1:6 in floor all as specified and directed.

S&F PVC (SWR) pipes and single socketed in any length with rubber ring joints laid in trenches or in floor 110mm dia, all as specified and directed.

S&F PVC ( SWR) bends any radius bore of 110 mm all as specified and directed.

S & F rotational moulded polythene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I of capacity 500 Litres all as specified and directed by Engineer - in - Charge .

S&F bib taps 15mm bore dia, fancy type, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe all as specified and directed .

S&F pillar taps 15mm bore dia, fancy type, cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed all as specified and directed by Engineer – in – Charge .

S & F grating doom 125 mm of PTMT (Minimum weight 40 gms) all as specified and directed.

S & F PVC connection 15 mm size with PTMTnuts of length 450mm all as specified and directed.

M & L cast iron floor trap 100mm dia with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 in repaired all as specified and directed by Engineer-in -Charge.

S & F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) but including connection to drain ( or outgoing pipe) and to flushing pipe, anti-syphonage pipe, sheet cover complete all as specified and directed.

S & F PVC 10 Ltrs syphonic action type flushing cistern, low level with inlet, ball valve and float including brackets, flush pipe of PVC 32mm bore and connection to WC pan complete all as specified and directed by Engineer-in -Charge.

S & F vitreous China wash basin, white, flat, blak, size 550 x 400mm including cutting and pinning in ends of brackets all as specified and directed by Engineer-in -Charge.

S & F viteous china urinal, half staff complete including providing and fixed plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe all as specified and directed

S & F PVC flexible waste pipe of standard length 25mm dia with PVC cap suitable WHB waste coupling all as specified and directed

S & F 15mm bore medium grade tube galvanised with all fittings and fixed complete to wall ceiling or laid in floor all as specified and directed by Engineer-in -Charge.

S & F 20mm bore medium grade tube galvanised with all fittings and fixed complete to wall ceiling or laid in floor allas specified and directed .

M & L 75mm thick PCC 1:3:6 type C2 using 20mm graded stone aggregate as in plinth protection, spcified and directed .

S & F Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe 20mm bore all as specified and directed

S & ball brass valves with 20mm bore dia high pressure, with polyethylene float and fly nut complete

S & F on site hume pipe septic tank designed to carry sewage and sullage water, excavation in any type of soil PCC 1:4:8 below foundation, Vent shaft, connection etc complete for 10 users as per TD No CEPZ/91/TD/47M sheet 1/1 dated 16 Dec 1991.

Preparation of old surface walls and applying three coats of white wash all as specified and directed.

M&L preparing new plastered or unplastered surfaces and applying three coats of white on ceiling, soffits of slabs, beams, and the like complete all as specified all as specified and directed

M&L two coats of white wash on new plastered or unplastered surfaces of walls over a coat of alkali resistance primer complete all as specified all as specified and directed

Preparation of new surfaces of steel of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide all as specified and directed.

M&L preparing new plastered or unplastered surfaces and applying two coats of cement base paint on newly plastered surfaces of walls, complete all as specified and directed.

M&L for point wiring complete with 1.5 Sqmm 1100 volts grade single core FRLS PVC insulated unsheathed cable with multi stranded copper conductor drawn through and including PVC casing & capping of suitable size on walls/ ceiling etc and including provn of 1.5 sqmm PVC insulated Multistranded copper cable as earth continuity conductor connected to common earth dolly including 1.22 mm thick pressed steel terminal boxes of suitable thickness, 3mm thick laminated sheet cover to house switch/regulators etc for all as specified and directed for one fan/light /bell point controlled by one switch/bell push.

Supply and fix in repairs / replacement switch piano type one way 6 Amps all as specified and directed.

Supply and fix angle holder with LED bulb 20 watt

Supply and fix sheet metal encloser MCB DB SPN 2 way

Supply and fix MCB SPN 10 Amps

Material and labour for fixing or passing through DWC pipe, laid in trenches or fixed to pole/wall or fixed to LT panel and board, XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, corss sectional area of size 6 Sqmm 2 core with required suitable size aluminum cable lugs (lugs should properly crimmped with crimpping tools) heat shrink joints, colour code heat shrink sheeves at both cable ends, cable gland for cable safety when passing through panel holes, including laying cable route indicators made out of MS angle iron of size 25 x 25 x 3 mm thick 60 cm long LT cable route indicatator making embossed on CI circular plate 150 mm dia 3 mm thick including groutting in PCC 1:3:6 type C 1 block concrete of size 20 x 20 x 20 cm including necessary earth work and painting over a coat of red oxide primer complete all as specified and directed as per site requirement all as specified and directed by Engr-in-Charge. Note: (i) DWC pipe required shall be measured and paid separately under relevent item of schedule as supply only. (ii) Heat shrink sleeve sleeve, lugs, cable glands, cable route indicators all are deemed to be included on the quoted rate. (iii) Earth work such as Excavation, Returning filliing, Removal paid under separte item.

Supply and laying of Telerex DWC (Double Wall Corrugated) HDPE pipe ISI marked of outer dia 50 mm and inner dia 38 mm polythylene including coupler and bend with smoth internal and profiled external surface for non pressure under ground cable complete all as specified and directed. Make: Rex Polyextrysion Ltd or equivalent approved make.

M&L for earthing with galvanised steel earth plate electrode 60cm x 60 cm x 6.3 mm burried directly in ground earth pit not less than 3.25 mtr deep below normal ground level with top edge of the plate vertically to depth of not less than 1.5 mtr below ground level connected to and including GI strip of size 32 x 6 mm 7.5 mtr beyond the earth pit as earthing lead including GI protection pipe 40 mm bore (light grade) upto 7.5 mtr beyond the earth pit and connecting to equipments by means of earthing lead , GI bolts, nuts & washer etc with provision of char-coal and salt etc all as per electrical plate No 3 of SSR Part - I, 2009 including RCC cover and MS angle iron frame watering arrangements with GI pipe 20 mm dia (medium grade) & MS funnel, concrete pit including excavation and earthwork and testing on completion etc complete all as specified and directed by Engr-in-charge. Note : Rate of item is deemed to be included for excavation in hard rock, by compressor machine to achieve required depth.

Surface excavation n. exc (not exceeding) 30cm deep and averaging 15cm deep and getting out in hard/Dense soil

M & L 100mm thick cement concrete type C-2, 1:3:6 (40mm graded aggregate) as in sub base all as specified and directed

M&L Brickwork with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 all as specified and directed.

Cutting existing steel tubing for alteration or additions for 20mm bore connection pipe (Each cut measured).

S & F 5000 Ltr capacity three layered rotational moulded polythylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I

Aishwarya Constructions

M/S SANDEEP H BHINGARDIVE

ARK ENTERPRISES

s.k.engineers

Shri Sant Cosntruction

GGS Infra

Vastushilpa Contrustion