SPECIAL REPAIRS TO BLDG No 1/F OF MES STAFF QTRS UNDER GE BELGAUM

Amount

Dismantling single layer Mangalore pattern or similar tiles in roofing and removing rubbish off the premises and old unserviceable tiles taken as credit completer. all as specified and as directed.

Dismantling asbestos cement (corrugated, semi corrugated, translucent etc.) sheets in roof coverings and removal of rubbish off the premises and old unserviceable sheet taken as credit complete. all as specified and as directed.

Dismantling battens for tiles, shingles etc. spaced exc 15cm for unframed work and removal of rubbish off the premises and old unserviceable sheet taken as credit complete. all as specified and as directed.

Dismantling timber scantling 40 Sqcm and over in section, in any position for unframed work and removing rubbish off the premises and old unserviceable timber scantlings taken as credit complete. all as specified and as directed.

Material and labour for 2nd class hard wood timber scantling cleans sawn and fixed complete all as specified and as directed .

Description all as per item no : 05 here in before but except timber

Dismantling ceiling and wall boards or insulation board any thickness including cover fillets and taken as credit complete all as specified and as directed

Dismantling wrought iron or mild steel work of any description and in any position and taken as credit complete all as specified and as directed .

Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thick (below or above GL)or in any position and removing rubbish off the premises complete. all as specified and as directed.

Demolition of brick /Stone masonry work built in cement mortar of any description and in any position and removing rubbish off the premises complete. all as specified and as directed.

Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key scrubbing down with water etc. complete all as specified and as directed.

Demolition of precast concrete articles and precast concrete block walling work built in cement mortar and removing rubbish off the premises and old unserviceable tiles taken as credit complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing rubbish off the premises complete all as specified and as directed.

Supply and fix in repairs Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.45mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. Note :Make of Galvalume sheet : TATA Blue Scope Ltd/JSW (Colouron)/LLOYD

Supply and fix in repairs Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.45mm thick of any colour having tensile strength of 550 Mpa as in ridge , valley gutter fixed with self tapping screws complete all as specified and as directed. Note :Make of Galvalume sheet : TATA Blue Scope Ltd/JSW (Colouron)/LLOYD

Supply and fix Mild Steel work as in wind ties etc. conforming to Fe-290 Gde- E-165. complete all as specified and as directed.

Supply and fix Rolled mild steel roof trusses (framed) trussed purlins, rafters, struts (beam, tee, angle channel or flat sections including distance pieces, cleats etc. conforming to grade Fe 410-W Gde E - 250 quality 'B' complete all as specified and as directed.

Material and labour for High pressure steam cured (HPSC) non asbestos fibre cement building board 4mm thick in false ceiling fixed with aluminum anodized snap grid of 60x60cm in ceiling with Tee section 35x25x1.25mm, L angle section25x25x1.25mm thick including 2mm dia GI hanging wire including all hanger fittings etc and applying three coats of white wash on ceiling board complete all as specified and as directed . Note : (i) Make of HPSC Board : EVEREST /ARMSTRONG (ii) Thickness of aluminium anodisation shall be of 15 microns . (iii) Make of aluminium anodised section : Jindal/Indal/Hindalco .

Material and labour for 4 mm thick Aluminium composit panel comprising of a core containing not less than 70% non combustible mineral filling sandwiched between two skins of 0.5mm thick alluminium alloy PERALUMAN-100 (AIMG1-NS41) complete with all necessary sub-structures, anchors,hindware and fittings to provide a total installation, fixed to existing wooden / steel members all as per manufacturers instructions complete all as specified and as directed. Note: (i) Measurement shall be taken flat as fixed without any allowance for laps, etc. (ii) Make: Alstrong/ Aludecor/ Alucobond/ Euroband

Material and labour for Preparing surface of wood and wood based materials, new or old, of any description and girth and treated with creosote oil complete all as specified and as directed.

Supply and fix Mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing conforming to Fe-290 Gde- E-165, complete all as specified and as directed.

Supply and fix 1mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and as directed..

Material and labour for PCC 1:4:8 type D2, (Using 40 mm graded stone aggregate ) 100 mm thick as in sub base of flooring including necessary form work complete all as specified and as directed.

Material and labour for 25 mm thick Plain cement concrete, 1:2:4 type B0, using 20 mm graded stone aggregate, as in sub base of floors etc including necessary form work complete all as specified and as directed.

Material and labour for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete and including screed bed or bedding layer of mortar 20 mm thick for laying floor finishes in CM 1:6 complete all as specified and as directed.

Material and labour for Machine cut Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over rendering 10mm thick in cement morter 1:4 on brick work or stone masonry surfaces as backing coat of skirting, dado etc complete all as specified and as directed

Material and labour for Premium quality Non skid joint free coloured ceramic tiles 7 to 8mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of joint free non skid tiles laid over screed bed 15mm thick in cement mortar 1:4 complete all as specified and as directed. .Note : Make of Tile :HR Johnson/Khajaria/Naveen

Material and labour for Premiumm quality Non skid joint free coloured ceramic tiles 7 to 8mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in skirtings etc. set and jointed in neat cement slurry and pointed in coloured cement to match with the shade of joint free non skid tiles laid over 10mm thick backing coat in cement mortar 1:4 complete all as specified and as directed. Note : Make of Tile :HR Johnson/Khajaria/Naveen .

Material and labour for Premium quality Non skid joint free coloured ceramic tiles 7 to 8mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match with the shade of joint free non skid tiles laid over screed bed 15mm thick in cement mortar 1:4 complete all as specified and as directed. Note : Make of Tile :HR Johnson/Khajaria/Naveen

Material and labour for Premium glazed ceramic coloured tiles of size 200x300x 5.5mm/350x250x7mm/450x350x7mm thick as in vertical surfaces such as skirting, dado and risers to steps etc, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 as backing coat for dado, skirting etc. complete all as specified and as directed.Note : Make of Tile :HR Johnson/Khajaria/Naveen

Material and labour for Granite slab 20mm thick machine cut as in partition, platform etc, bedded and jointed with grey cement slurry and pointed in white cement with admixture of pigment to match the shade of granite stone including round cutting and polishing laid over and including screed bed 15mm thick in C.M 1:6 complete all as specified and as directed .

Material and labour for PCC 1:3:6 type C2, (Using 40 mm graded stone aggregate ) 75 mm thick as in sub base of flooring including necessary form work complete all as specified and as directed.

Material and labour for glass dividing strips 3 mm thick width of strips 38mm and inserted in position to confirm to design complete all as specified and as directed.

Material and labour for Reinforced cement concrete (nominal mix) Type B1 1:2:4 ( using 20 mm graded aggregate) as in lintels, slab, shelves etc over 1.5m span complete all as specified and as directed.

Material and labour for Use and waste of Steel Formwork to sides and soffits of floor or roof beams, beam , lintels, cantilevers, slabs, shelves including supports, overhangs, etc for rough finished surfaces of concrete complete all as specified and as directed.

Supply and fix Mild steel TMT bar 10mm dia and over, cut to length bent to shape reqd including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Description all as per item no :36 here in before but 5 to 10 mm dis a in stirrups/binders and spacers etc

Material and labour for Precast cement concrete block masonry (1:3:6) type C1 ( using20mm graded stone aggregate) masonry with solid block exc10cm in width and setting in CM 1:6 complete all as specified and as directed.

Material and labour for Rendering 10mm thick in cement mortar 1: 6 on fair faces of PCC block work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for Preparation of newly plastered or un plastered surfaces of wall and applying two coats of oil bound distember over a coat of Chalk whiting primer complete all as specified and as directed.

Material and labour for Complete removal of existing treatment on walls including preparation of surface and applying two coats of oil bound distemper over a preparatory coat of 1 mm thick wall care putty complete all as specified and as directed. .

Material and labour for Preparing newly plastered or un plastered surfaces and applying three coats of white wash, complete all as specified and directed.

Material and labour for 15 mm thick Rendering on fair faces of brick work or concrete surfaces in CM 1:4 surface finished even and smooth without using extra cement with water proofing compound complete all as specified and as directed

Supply only integral water proofing compound. Make :Impermo/Roff/Cico

Material and labour for Preparing surfaces of wood or wood based surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed

Material and labour for Preparation of old wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint completeall as specified and as directed.

Material and labour for Preparation of old steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint completeall as specified and as directed.

Material and labour for Preperation of newly plastered surfaces of walls and brooming down and appyling two coat of exterior emulsion paint over primer after preparatory coat of 1 mm thick wall care putty on wall complete all as specified and as directed. Note : Make of exterior emulsion paint : Asian Paints (Brand :APEX )

Material and labour for Complete removal of old plastered/unplasterd surfaces of wall and brooming down including necessary preparation of surfaces and appyling two coat of exterior emulsion paint over primer after preparatory coat of 1 mm thick wall care putty on wall complete all as specified and as directed.

Material and labour for Providing cement concrete type C1, 1:3:6 (Using 20cm graded stone aggregate) in coping including necessary steel form work complete all as specified and as directed.

Taking down chowkhat or frames with shutters (without taking off shutter from the frame) of area n. exc 1.5 Sqm each and taken as credit complete. all as specified and as directed.

Taking down chowkhat or frames with shutters (without taking off shutter from the frame) of area exc 1.5sqm but n. exc. 4.0 sqm eachand taken as credit complete all as specified and as directed

Taking down shutters of any description of area exc 1.0 sqm and n exc 2.0 sqm each and taken as credit complete all as specified and as directed

Supply and fix Powder coated aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified all as specified directed. Note :(i) Make of Aluminium section : Jindal/Hindalco/Indal (ii) Minimum thickness of Powder coating shall be of 50 Microns

Material and labour for Powder coated aluminium frame work as in doors, windows, ventilators and partitions with one or more rebates using standard aluminium extruded sections including provision of joining cleats ,glazing clips, hinges, handles, etc.compete all as specified and as directed. Notes: (i) All the aluminium sections provided under this item shall be measured and converted into weight for payment with the designated unit weight mentioned in the manufacturer's catalogue for the corresponding aluminium sections/ fittings. (ii) The rate quoted shall be deemed to include necessary grouting/ embedding of the aluminium frames/ supports into floors/ walls and making good the disturbed surfaces to match with the existing surfaces and provision of necessary rubber gaskets. iii) Particle board/ glass panels wherever required shall be measured and paid separately. (iv) Make of Aluminium section : Jindal/Hindalco/Indal (v) Minimum thickness of Powder coating shall be of 50 Microns

Material and labour for 4.0 mm thick Sheet glass ordinary quality and glazing with glazing clips in square n exc 0.5 sqm in each pane complete all as specified and as directed. Note : Make of Glass :Saint Gobain/Modi Guard/ Gold Fish

Supply and fix Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and as directed .

Supply and fix Mild steel framed work such as grills, gratings etc. With ends of bar shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed labusters, walk ways, railings, framewok of water tanks and similar work con-forming to FE 290. Gde-E-165 complete all as specified and as directed .

Material and labour for Second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed..

Material and labour for Factory made 2nd class hard wood plain, framed, panelled door shutter 35mm thick , two panels with lock rail and panels of 12 mm thick plywood BWR 9 ply with commercial veneers on both faces with size of rails and stiles sizes of members of shutters as specified in SSR Part-I,Section 8.Clause 8.24(a) and fitted to Chowkats complete all as specified and as directed.

Material and labour for Factory made 2nd class hard wood Glazed and skeleton shutters , 30 mm thick , open rebated and prepared to receive glass, gauze, etc. (with divided in to square with plain,chamfered or rounded,mitered and rebated sash bars any numbers), edge of framing plain, chamfered or rounded, fitted with cut and mitred beeds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); supplied and fitted to chowkats complete all as specified and as directed.

Material and labour for solid PVC Door Frame of Size 50mm x 47mm out of 5mm prelaminated PVC sheet on both sides reinforced with M.S Square tube, supplying and fixing in opening as per sepcification and drawing . complete all as specified and as directed.

Material and labour for Factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tube of top and bottom rails.MS frame shall be covered with heat moulded prelaminated PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail ,lock rail and bottom rail on either side and as gap insert for top and bottom rail. Pannelling of plain PVC sheet to be fitted in MS frame welded /sealed to the stiles and rails with suitable PVC sheet bedding and jointed together with solvent cement as per specification and drawings complete all as specified and as directed.

Supply and fix Stainless steel butt hinges medium weight 100mm size fixed with SS screws (ISI Marked) complete all as specified and as directed

Supply and fix 150 mm long extruded section aluminium alloy anodised handles fabricated type complete all as specified and as directed. Make :Crown/Classic/Adarsh

Supply and fix Aluminium anodised barrel tower bolt of extruded section of size 150mm long.complete all as specified and as directed. Make :Crown/Classic/Adarsh

Supply and fix Aluminium alloy anodised sliding door bolt 300mm long with hasp and staple (Bolt type) and fixing clips of sheet cast or extruded section of cast aluminium alloy complete all as specified and as directed . Make :Crown/Classic/Adarsh

Supply and fix Floor door stopper 150 mm length of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor, complete all as specified and as directed. Make :Crown/Classic/Adarsh

Supply and fix 300mm Mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.(ISI Marked)

Supply and fix Vitreous china water closet, size 360x545x395 mm Pedestal type, white, including flush pipe, seat cover, Jet spray etc, including connection to drain (or out going pipe) and to flushing pipe, anti syphonage pipes etc. complete all as specified and as directed. (Note :MAKE: Essco by Jaquar, Cat part no. ECS-WHT-551SNPP or equivalent price and specification M/S Hindware/M/S Johnson )

Supply and fix PVC SWR trap S/P/Q of size 125/110 mm complete all as specified and as directed . Note :Make : Finolex/Supreme/Prince

Supply and fix in repair PVC Flushing cistern,Smart Single Flush Wall Hung type , size 380x380x120 mm with 39mm Drainage L-bend Pipe with Gasket and Installation Kit, complete all as specified as and directed. (Note :MAKE: Essco by Jaquar Cat part no. WHE-WHT-183NL or equivalent price and specification M/S Hindware/M/S Johnson )

Supply and fix in repairs Vitreous china wash hand basin white flat back size 455x350x165mm, including 32mm dia PVC waste pipe, PVC connection 600mm long cutting for and pinning in ends of CI brackets or erecting stands etc complete all as specified and as directed.(Note :MAKE: Essco by Jaquar, Cat part no. ECS-WHT-803 or equivalent price and specification M/S Hindware/M/S Johnson )

Supply and fix in repairs Bib taps 15 mm dia cast copper alloy, chromium plated, wall flange screwed down high pressure for iron pipe of any type complete all as specified and as directed.(Note :MAKE: Essco by Jaquar, Cat part no. COS-103037 or equivalent price and specification M/S Hindware/M/S Johnson )

Supply and fix in repairs for Bib tap 15 mm dia cast copper alloy, chromium plated, long body wall flange screwed down high pressure for iron pipe of any type complete all as specified and as directed. (Note :MAKE: Essco by Jaquar, Cat part no. APR-101107 or equivalent price and specification M/S Hindware/M/S Johnson )

Supply and fix in repairs for Three way Wall Mixer with 115 mm long bend pipe for connection to ovehead shower (with bush and piston diverter fitting) with aerator, 15 mm dia cast copper alloy, chromium plated, screwed down high pressure for iron pipe of any type complete all as specified and as directed. Note :Make :Jaguar/Hindware/Johnson

Supply and fix in repairs Angular stop cock/ valve 15 mm dia cast copper alloy, chromium plated, wall flange screwed down high pressure for iron pipe of any type complete all as specified and as directed. (Note :MAKE: Essco by Jaquar Cat part no. APR-101053 or equivalent price and specification M/S Hindware/M/S Johnson )

Supply and fix in repairs Pillar cock rocket type with aerator 15 mm dia cast copper alloy, chromium plated, screwed down high pressure for iron pipe of any type complete all as specified and as directed. (Note : MAKE: Essco by Jaquar Cat part no. MQT-507KN or equivalent price and specification M/S Hindware/M/S Johnson ) .

Supply and fix PVC connections 15 mm size with PTMT nuts 450mm long complete all as specified and as directed. Make :Prayag/M/S Shakthi Industries

Material and labour for PVC (SWR) nahani/floor trap plain with grating of 75mm dia including jointing with solvent cement complete all as specified and as directed.Note :Make : Finolex/Supreme/Prince

Supply and fix in repair PTMT grating of 100mm Size (Minimum weight :25 gms ) complete all as specified and as directed.Make : Prayag/M/S Shakthi Industries .

Supply and fix in repairs Chromium plated Shower rose 100 mm dia and shower arm 240 mm long with swivel joint complete all as specified and as directed .(Note :MAKE: Essco by Jaquar Cat part no. EOS-542N & Cat part no. ALE-536A or equivalent price and specification M/S Hindware/M/S Johnson )

Supply and fix in repairs Towel Rail 600mm long of stainless steel fixed with and including Chromium plated brass screw with wooden plugs complete all as specified and as directed. (Note :MAKE: Essco by Jaquar Cat part no. AEC-1111N or equivalent price and specification M/S Hindware/M/S Johnson )

Supply and fix in repairs Sink made of stainless steel lmm thick kitchen with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed. Make : Nirali/Joyna

Taking down GI/PVC pipes of 25 mm bore ,any description etc and taken as credit complete all as specified and as directed .

Taking down GI/PVC pipes of 20 mm bore ,any description etc and taken as credit complete all as specified and as directed .

Taking down GI/PVC pipes of 15 mm bore ,any description etc and taken as credit complete all as specified and as directed .

Supplyind and laying CPVC pipes 25 mm outer dia , SDR 11 and Plain CPVC SDR 11 Fittings on walls/ceiling or laying in floors complete all as specified and as directed.Note : Make : Ashirwad/Astral

Supplyind and laying CPVC pipes 20 mm outer dia , SDR 11 and Plain CPVC SDR 11 Fittings on walls/ceiling or laying in floors complete all as specified and as directed.Note : Make : Ashirwad/Astral

Supplyind and laying CPVC pipes 16 mm outer dia , SDR 11 and Plain CPVC SDR 11 Fittings on walls/ceiling or laying in floors complete all as specified and as directed.Note : Make : Ashirwad/Astral

Taking down eaves gutter pipes, rain water pipes (of any size or pattern) including fittings, head shoes, bends, swan neck etc and taken as credit complete all as specified and as directed

Supply and fix 160 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches of floor or fixed to walls complete all as specified and as directed..Note : Make : Finolex/Supreme/Prince

Supply and fix 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches of floor or fixed to walls complete all as specified and as directed..Note : Make : Finolex/Supreme/Prince

Supply and fix 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches of floor or fixed to walls complete all as specified and as directed..Note : Make : Finolex/Supreme/Prince

Supply and fix 110 mm dia PVC (SWR) bends any radius complete all as specified and directed. .Note : Make : Finolex/Supreme/Prince

Supply and fix 75 mm dia PVC (SWR) bends any radius complete all as specified and directed. .Note : Make : Finolex/Supreme/Prince

Supply and fix in repairs PVC (SWR) vent cowl 110 mm bore complete all as specified and as directed..Note : Make : Finolex/Supreme/Prince

Taking down carefully old unserviceable sub main wiring of Aluminium conductor cable of sizez 2.5 and 4 sq.mm and taken as credit complete all as specified and as directed.

Material and labour for Point wiring 1.5 Sqmm single core FRLSH PVC insulated unsheathed 1100 volts grade copper conductor multi-stranded cables for phase and neutral drawn through and including PVC casing capping (ISI Marked )of suitable size with all necessary fittings and provision of one run of Green coloured FRLSH PVC insulatedunsheathed 1100 volts grade copper conductor multi-stranded single core cable of size 1.5 sqmm and connected to common earth dolly including provision of suitable size of modular PVC surface box fixing on wall with and including white colour cover plates for mounting modular type switches, sockets, fan regulators, bell pushes etc. for one light point controlled by one switch 1 way including taking down unserviceable point wiring from existing surfaces of any description and taken as credit complete all as specified and as directed. NOTE: (i) Make of PVC cable :Finolex/Polycab/ Havells (ii) Make of PVC casing and capping : Avon Plast/Presto plast /Garware

All as described in item No. 100 here in before but for one call bell point controlled by one bell push

All as described in item No. 100 here in before but for One ceiling fanpoint controlled by one switch and regulator

All as described in item No. 100 here in before but forOne exhaust fan point controlled by one switch

All as described in item No. 100 here in before but for One light point controlled by two 2 way switches.

All as described in item No. 100 here in before but for one 05 Amps socket outlet on independent board.

All as described in item No. 100 here in before but for one 05 Amps socket outlet on the same board with other switches.

All as described in item No. 100 but wiring with 2.5 SqmmFRLS PVC insulated unsheathed cable copper conductor multi stranded (for 15 Amps power socket) with one run of copper conductor FRLS PVC insulated multi-stranded cable 2.5 Sqmm for earth continuity conductor and connecting to common earth dolly, complete all as specified and as directed.

Supply and fix in repairs Modular switch piano type 6 Amps flush button 230 volts AC one way, complete all as specified and as directed. Make -Anchor (Roma)/Legrand/CONA

Supply and fix in repairs Modular switch piano type 6 Amps flush button 230 volts AC two way, complete all as specified and as directed. Make -Anchor (Roma)/Legrand/CONA

Supply and fix in repairs Modular bell push flush type AC 230 Volts 6 Amps, 1 module complete all as specified and as directed.Make -Anchor (Roma)/Legrand/CONA

Supply and fix in repairs Modular socket outlet 6 Amps 2/3 pin combined flush type multipurpose 2 module,complete all as specified and as directed. Make -Anchor (Roma)/Legrand/CONA

Supply and fix in repairs Modular socket outlet 6/16 Amps 2/3 pin combined flush type multipurpose 2 module,complete all as specified and as directed. Make -Anchor (Roma)/Legrand/CONA

Supply and fix in repairs Modular switch piano type 16 Amps flush button 230 volts AC one way, complete all as specified and as directed. Make -Anchor (Roma)/Legrand/CONA

Supply and fix in repairs Call bell, ding dong, 230 volts AC supply completeall as specified . Make -Anchor (Roma)/Rider

Supply and fix in repairs or replacement of PVC or Polycarbonate ceiling rose 3 terminal , isolated body suitable for 230 volts AC supply, complete all as specified and as directed. Make -Anchor (Roma)/Legrand/CONA

Supply and fix in repairs Modular fan regulator electronic step type ,120 watts , 2 module suitable for 1200/1400 mm sweep ceiling fan completeall as specified . Make -Anchor (Roma)/Rider

Material and labour for Sub main wiring with 2 runs of single core FRLSH PVC insulated unsheathed multi-stranded copper conductor cable of size 6 Sq mm drawn through and including non metallic rigid PVC CONDUIT in Ivory/Grey/white colour medium grade etc fixed on wall/ceiling with all necessary fittings and provision of one run of single core FRLSH PVC insulated unsheathed multi-stranded copper conductor cable of size 6 Sq mm for earth continuity and connected to common earth dolly , ,complete all as specified and as directed. Notes: (i) Two different color wires shall be used for phase and neutral . (ii) Connections of cables with MCBs or bus bars shall be done through appropriate size brass/ copper thimbles . (iii)02 run of 6.0 sqmm and 01 run of 6.0 sqmm including 01 run of PVC conduit will be measured as one length (iv)Make of PVC copper conductor cable:- Finlex/Poly cab/ Havells. (v) Make of PVC conduit :Avon plast/Presto plast /Garware

Supply and fix in repairs Inverter type LED INTEGRATED BATTEN tube light fitting 20 watt with square profile and polycarbonated channel ,Lithium ion battery with charging time 8 to 10 hours and back up time upto 4 hours complete with all accesories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed. Make :Havells Pride PLUS INVERTER BATTEN OF Model LHEXACP7FN1WO20 or equivalent price and specification of M/S Wipro/CG

Supply and fix in repairs Inverter LED INTEGRATED BATTEN tube light fitting type 10 watt with square profile and polycarbonated channel ,Lithium ion battery with charging time 8 to 10 hours and back up time upto 4 hours complete with all accesories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed. Make : :Havells Pride PLUS INVERTER BATTEN OF Model LHEXACP7FN1WO10 or equivalent price and specification of M/S Wipro/CG.

Supply and fix 1 feet LED 05 watts integrated type complete with all accesories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed . Note :Make :- Havells Lumifine plus or equivalent price and specification in Philips/CG/Wi[pro

Supply and fix LED street light fitting 25 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.. Philips cat part no Sleek Surface SM251CW: or Equivalent price and specification in M/S Wipro/CG

Supply and fix in repairs Energy saving surface mounted, decorative oval bulk head edge-lit LED luminaire 10W, comprising of high brightness LEDs complete with all accessories internally pre wired complete including provision of 10 Watts high brightness LEDs 6000K, suitable size wooden board with sunmica top and connecting up light fitting withPVC FRLSH twin core twisted flexible copper conductor cable of suitable size from ceiling rose to connector block complete all as specified and directed. Make: Havells ENDURA RUGBY NEO N- IP65 or equivalent in CG/ Philips/ Wipro

Supply and fix ceiling fans complete with blades, down rods of suitable length of 20 mm dia medium grade GI pipe from top to bottom, and accessories, 230 V, 1200 mm sweep, Minimum air delivery 210 CFM with service value 6.00 BEE 5 star rated with brush direct current motor (BLDC) and taking down existing unserviceable ceiling fan from the location and setting aside for fixing /deposting to MES store yard complete all as specifed and as directed . Note : (i) Make:-Bajaj /Crompton/Orient (ii) Old ceiling fan will be deposited in MES store yard

Supply and fix Exhaust fan made out of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm ,heavy duty with necessary grouting and fixing arrangements and provision of 3 core flexible FRLSH PVC copper conductor cable of size 1.5 sqmm size from ceiling rose to connector of exhaust fan complete all as specified and directed . Note :Make of exhaust fan : Almonard/Khaitan/Bajaj

Supply and fix Exhaust fan made out of steel body complete with louvers shutter, voltage 230V, 50 Hz, heavy duty, Copper winding of sweep 300 mm ,heavy duty with necessary grouting and fixing arrangements and provision of 3 core flexible FRLSH PVC copper conductor cable of size 1.5 sqmm size from ceiling rose to connector of exhaust fan complete all as specified and directed .Note :Make of exhaust fan : Almonard/Khaitan/Bajaj

Taking down old unserrviceable MCB DB alongwith MCBs with old wooden boards and making good to disturbed surfaces to match with the existing surface and taken as credit complete all as specified and as directed

Supply and fix factory made epoxy powder coated distribution board double door TPN 4 ways (VTPN MCCB DB) with metal door (IP-43 protection) fabricated from minimum 1.0 mm thick CRCA sheet and fixed flush on wall with sunmica board and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts and suitable for one FP MCCB 100 Amps as incomer and SP/TP MCBs (or any combination of SP/TP MCBs ) outgoings complete all as specified and as directed.Note :Make : Indo Asian/L&T/Legrand

Supply and fix in replacement MCCB,4 pole,100 Amps , 16 KA current rating conforming to IEC-609472 & IS-139473 to be fixed in distribution board complete all as specified and as directed ..Note :Make : Indo Asian/L&T/Legrand

Supply and fix Factory made epoxy powder coated distribution board SPN 12 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.0 mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plate with knockouts and suitable for one SPN MCB 32/40 Amps as incomer and 10 SP MCBs as outgoings complete all as specified and as directed Make - L&T / Legrand/ Indo Asian

Supply and fix Factory made epoxy powder coated distribution board SPN 4 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.0 mm thick CRCA sheet and fixed on wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plate with knockouts and suitable for one SPN MCB 32/40 Amps as incomer and 2 SP MCBs as outgoings complete all as specified and as directed Make - L&T / Legrand/ Indo Asian

Supply and fix Miniature circuit breaker (MCB) of SPN 40 to 63 AMP 240V, 10KA 'C' curve following poles including dismantling old one and taken as credit complete all as specified and as directed.. . Make - L&T / Legrand/ Indo Asian

Supply and fxi MCB SP 240 Volt capacity 5 to 32 Amps‘C’ curve, complete all as specified and as directed. Make - L&T / Legrand/ Indo Asian

Material and labour for Electrical earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick, burried directly in ground vertically, (earth pit not less than 2.25 metre deep below normal ground level) with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level, connected to GI wire 4mm dia (7.5 metre long) by means of bolts, nuts, washers made of galvanized iron connected to earthing to body of equipment. GI wire protected by 15mm dia light grade GI pipe (7.5 metre long) and watering arrangements with 20 mm dia GI pipe medium grade and GI funnel all as specified and shown in Electrical Plate No 3 of MES Schedule (SSR) Part I including necessary excavation and earth work in any type of soil, charcoal dust salt, and PCC 1:2:4 type B1 in chamber, RCC 1:2:4 type, B1 cover slab, 40mm thick with 6mm dia mild steel bars at 100mm centre to centre both ways and with 6mm dia MS hook complete, and testing of Earth resistance complete all as specified and as directed.

Taking down existing unserviceable energy meter,dismantling and removing and refixing with suitable arrangement i.e on 2nd hard wood sunmica board for metering purpose complete all as specified and as directed

Supply , lay and test cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 35 sqmm 3.5 core including lugs,thimbles and ferrules etc laid in trenches ,fixed to wall ,floor etc complete all as specified and as directed.Make : Gloster/Poly cab/CCI

Excavation in trenches n exc 1.5m wide and n.exc 1.5m depth for laying of cables/ GI tubes/drain pipe etc and getting out in any type of Soil complete all as specified and as directed.

Material and labour for Double wall corrugated High Density Polymer Ethyl pipe(SDR 17) of ISI marked 63 mm outer dia and 50 mm inner dia including necessary fittings like couplers,bends,end caps etc as in cable protection fixed to poles with necessary suitable MS clamps, bolts, nuts, washers or laid in trenches/ roads crossings etc.complete all as specified and as directed. Make : Ketron/Rex/Duraline

Returning, filling in excavated soil including spreading levelling and well ramming in layers n exc 25cm thick .complete all as specified and as directed.

Removing excavated material/surplus soil n exc 50m and depositing where directed at a level n exc 1.5m above the starting point .complete all as specified and as directed.

Supply and lay 40 mm bore Galvanized iron pipe , “Light grade”, including all fittings and fixed on pole/walls/in road etc for cable protection complete all as specified and as directed. Make : TATA/JINDAL/Prakash surya

Taking up or down steel tubing of size upto 40 /25mm bore and connections and taken as credit complete as per specified and as directed.

Supplyind and laying CPVC pipes 40 mm outer dia , SDR 11 and Plain CPVC SDR 11 Fittings on walls/ceiling or laying in floors complete all as specified and as directed.Note : Make : Ashirwad/Astral

Supplyind and laying CPVC pipes 25 mm outer dia , SDR 11 and Plain CPVC SDR 11 Fittings on walls/ceiling or laying in floors complete all as specified and as directed.Note : Make : Ashirwad/Astral

Material and labour for 1000 litres capacity Rotational moulded polyethylene (HDPE) water storage tanks, 'ISI' marked, cylindrical, vertical with closed top conforming to IS 12701-1989 having two layers wall construction with manhole lid and suitable locking arrangement including making holes for inlet, outlet and over flow pipes, hoisted, fixed in position and testing complete and demolition/taking down of existing RCC/PVC water storage tank of any description from the existing staging/ Building after disconnecting and dismantling of all existing pipe line connections carefully and taken as credit complete all as specified and as directed.Note :Make of HDPE Tank :Sintex/Polycon /Infra

Supply and fix 25 mm dia PTMT ball valve high pressure (Minimum weight :210 gms) with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and as directed.Make : Prayag/M/S Shakthi Industries

Supply and fix 25 mm bore dia gun metal gate valve heavy duty ISI marked with iron wheel head screwed both ends to iron pipes and fixed complete all as specified and as directed.Make : Leader/Kirloskar/Zoloto

Supply and fix 40 mm bore dia gun metal gate valve heavy duty ISI marked with iron wheel head screwed both ends to iron pipes and fixed complete all as specified and as directed.Make : Leader/Kirloskar/Zoloto

Supply and fix Fancy type Chromium plated Bib taps of 15mm dia cast copper alloy with crutch or butterfly handle, screwed for iron pipe or for brass ferrule. complete all as specified and as directed.Make : Metro/GEM/ESS ESS

Material and labour for Construction of valve chamber of internal size 900 x 900 x 960mm suitable for 150 mm dia sluice valve including necessary earth work excavation PCC 1:4:8 in foundation type D-2 using 40mm graded stone aggregate, brick wall in CM 1:4, PCC 1:2:4 type B-1 for coping, 15mm thick rendering in CM 1:4 including provision of MS sheet cover 3.0mm thick with MS angle iron frame 40 x 40 x 3mm all round and at diagonals of size 40 x 40 x 6mm and also MS plate welded to MS angle, embedded in concrete with suitable hinges and locking arrangements, including two coats of synthetic enamel paint over a coat of red oxide primer necessary excavation earth work etc complete all as specified and as directed.

Material and labour for Plain cement concrete type D2 1:4:8 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.

Material and labour for Plain cement concrete bed 1:4:8 type D-2 ( using40mm graded stone aggregate) to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested etc for 150mm dia SGSW pipe line complete all as specified and as directed.

Material and labour for Salt-glazed stoneware drain pipes of 150mm dia laid in trenches and, jointed in cement mortar 1 :3 .complete all as specified and as directed . (ISI Marked )

Material and labour for Providing cement concrete type B1, 1:2:4 (using 20cm graded stone aggregate) as in channel and benching complete all as specified and as directed.

Extra for forming Fair finished drain or channel 25CM inner girth in cement concrete using extra cement including forms, moulds etc., complete all as specified and as directed.

Material and labour for Precast cement concrete manholes cover in 1:2:4 type B-1, with using 20mm graded aggregate and jointed in CM 1:6 including necessary steel form work ,moulds etc complete all as specified and as directed.

Cutting into exiting manholes for connecting new drain , making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished and reforming benching as required for 110 mm dia pipe complete all as specified and as directed.

Extra for forming Fair finished drain or channel 30CM inner girth in cement concrete using extra cement including forms, moulds etc., complete all as specified and as directed.

M/s B C CHOUGULE

M/s.Y.N.PATIL

DHANSHRI ENTERPRISES

M/S MAHADEV M PATIL