Rewiring, supply and fixing of L.E.D Light Fixtures and wall,Ceiling and Exhaust fan in first floor of APMC Office and gate pass cabins at NGM Najafgarh.

Amount

Supplying and fixing of surface/ recess mounting, vertical type, 415 V, 4 way Double door TP&N MCCB distribution board load line of sheet steel, dust protected, duly powder coated painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCCBs with MCBs and incomer (MCCB) as required as per below :- Incomer- 4 pole MCCB, 125A, 26KA - 1 No. Outgoing-63 A DP, MCB - 12 Nos.

Supplying and fixing 12 way, Double door, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including ear thing etc as required. (But without MCB/RCCB/Isolator)

Supplying and fixing Cable end Box (Loose Wire Box) suitable for 8 way, Double door FP MCBDB, triple pole and neutral, sheet steel, MCB distribution board, 415 Volts, on surface/ recess, complete with testing and commissioning etc. as required.

Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A 240 V "C" curve DP MCB complete with connections, testing and commissioning etc. as required.

Supplying and fixing single pole 5 A to 32 A rating,240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of Single pole in the existing MCB DB complete with connections, testing and commissioning etc as required.

Supplying and drawing sizes of 3X2.5 sq mm FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/ PVC conduit as required

Supplying and drawing sizes of 3X4 sq mm FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/ PVC conduit as required.

Supplying and drawing sizes of 3X6 sq mm FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/ PVC conduit as required.

Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/recessed steel/PVC conduit including dismantling as required.- Group C.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and ear thing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.--Group C

Supplying and fixing of sizes 25 mm medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A, modular switch, connections etc. as required.

Rewiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required.

Supplying and fixing 5/6 A switch modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

Supplying and fixing 2 way 5/6 A switch modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

Supplying and fixing 15/16 A switch modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

Supplying and fixing 3 pin 5/6 A Socket outlet modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

Supplying and fixing 6 pin 15/16 A Socket outlet modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

Supplying and fixing Bell push modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

Supplying and fixing 1 or 2 Module (75mmX75mm) size, GI box along with modular base & cover plate for modular switches in recess etc. as required.

Supplying and fixing 3 Module (100mmX75mm)size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required.

Supplying and fixing 8 Module (125mmX125mm) size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required.

Supplying and fixing 12 Module (200mmX150mm) size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required.

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (up to 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of size up to 35 sq. mm (clamped with 1mm thick saddle)on wall surface as required.

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of size above 35 sq. mm and up to 95 sq. mm (clamped with 25x3mm MS flat clamp)on wall surface as required.

Supplying and laying of 63 mm dia (OD-63 mm & ID-51 mm nominal) size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required.

Supplying and laying of 90 mm dia (OD-90 mm & ID-76 mm nominal) size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required.

Supplying and making indoor end termination with brass compression gland and aluminum lugs for 4 x 16 Sq. mm size of PVC insulated and PVC sheathed / XLPE aluminum conductor cable of 1.1 KV grade as required.

Supplying and making indoor end termination with brass compression gland and aluminum lugs for 4 x 25 Sq. mm size of PVC insulated and PVC sheathed / XLPE aluminum conductor cable of 1.1 KV grade as required.

Supplying and making indoor end termination with brass compression gland and aluminum lugs for 4x 35 Sq. mm size of PVC insulated and PVC sheathed / XLPE aluminum conductor cable of 1.1 KV grade as required.

Supplying and making indoor end termination with brass compression gland and aluminum lugs for 4 x 50 Sq. mm size of PVC insulated and PVC sheathed / XLPE aluminum conductor cable of 1.1 KV grade as required.

Supply of 40 Amp rating, double pole, 240 V,MCB for the existing MCB DB.

Supply of 4 X 16 sq. mm (Armored) size PVC insulated PVC sheathed aluminum conductor cable of 1.1 KV Grade.

Supply of 4 X 25 sq. mm (Armored) size PVC insulated PVC sheathed aluminum conductor cable of 1.1 KV Grade.

Supply of 4 X 35 sq. mm (Armored) size PVC insulated PVC sheathed aluminum conductor cable of 1.1 KV Grade.

Supply of 4 X 50 sq. mm (Armored) size PVC insulated PVC sheathed aluminum conductor cable of 1.1 KV Grade.

Supplying and fixing of Wall/Bracket fan 400 mm Sweep Hi-speed smooth oscillation & running, high speed motor for higher air delivery, Superior low voltage performance , Aerodynamically designed balanced heavy duty PP Blade.

Supplying and fixing of metallic heavy duty Exhaust fan 300 mm Sweep, specially designed metal blade , double ball bearing heavy duty motor with protective steel bird guard , robust construction in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.

Supplying of metallic Ceiling fan 1200 mm Sweep, Three coat metallic finish to enrich the gloss, Wider tip blades for effective air circulation, High performance even at low voltage, robust construction.

Supply and fixing Surface Mounting High Lumen LED Flat panel 2'x2' of 36 watt made of CRCA sheet steel duly powder coated with high efficient LEDs & Glare free full opal diffuser, IP20 made of housing single piece pressure die cast powder coated , M S zinc plated & passivated, optimized led orientation for better light distribution , high efficiency thermal design for better heat dissipation , operating temperature 10 deg to 50 deg C , wide stread of light to cover maximum area , 2.5 K V surge protection , no harmful UV/IR radiation and mercury free , beam angle 120 deg Color temp 6000deg K.

Supply and fixing surface mounting LED Slim round down lighter with high efficient LEDs of 22 watt & Glare free opal diffuser, IP20. made of housing single piece pressure die cast powder coated , matt finish opal diffuser for glare free and uniform lighting M S zinc plated & passivated, optimized led orientation for better light distribution , high efficiency thermal design for better heat dissipation , operating temperature 10 deg to 50 degC , wide stread of light to cover maximum area , 2.5 K V surge protection , no harmful UV/IR radiation and mercury free , beam angle 120 degColor temp 6000deg K

S.I.T.C of recess LED light flat panel of 1x1 feet 24 watt , colored temp.5700 k ,CRI>80 , output lumen 3410. suitable for 240 volts , 50 Hz AC supply, in existing false ceiling cut out including mounting accessories , connection etc. as reqd.

Buy back rates of old dismantled Ceiling fan/Exhaust fan/wall fan i/c dismantling charges

Buy back rates of old dismantled ordinary light fixtures i/c dismantling charges

Buy back rates of old dismantled Scrap of distribution board etc. i/c dismantling charges

Buy back rates of old dismantled Copper wire Scrap i/c dismantling charges

SRS ENGINEERS