Urgent repairs and minor works at Deep Bhavan office, Chennai Directorate

Demolishing R.C.C work manually by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer - in - charge.

Demolishing brick work manually by mechanical means including stacking of serviceable material and disposal of unserviceable material with in 50 metres lead as per direction of Engineer - in - charge. In cement mortar.

Dismantling of granite floor / wall /stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead

Disposal of building rubbish / malba/similar unserviceable dismantled or waste materials by mechnical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by engineer-in-charege beyong 50m initial lead, for all leads including all lifts involved.

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead Of area 3 sq. metres and below etc complete., Supply of all materials, labour, tools and plants rope,boosun chier, ladder, etc completed., All as directed

Removal of Water motor and Electricity board as directed

Removal of existing damaged rolling shutter (3.00x 2.15m) & (2.30X2.15m)

Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in for all leads & lifts, laying in uniform layers with mechanical paverfinisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achievethe desired density, complete as per specifications and directions of Engineer-in-Charge.

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharg - For ordinary roc.

Providing and laying of plain cement concrete 1:3:6 (1 Cement : 3 coarse sand / M-Sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) Including mixing laying, curing, consolidation excluding side shuttering etc., complete, supply of all labours, materials, tools & plants etc., Supply of all materials, labour, tools and plants, scaffolding etc completed. All as directed

Providing steel reinforcement for RCC work including straighteing , cutting , bending , binding , placing in position Fe 500D/550D grade steel reinforcement of HYSD tor steel/TMT bars of make SAIL/VIZAG Steel/RINL/TATA-TISCON/ JINDAL for R.C.C work at all heights as per drawing and as directed including supply of binding wire of approved first quality & thickness, cost of all materials, labour, tools and plants and all other charges etc. complete for all works.

Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform. cost including all labours materials,tools & plants, etc complete., supply of all labours, materials, tools & plants, transportation etc., complete.

Reinforced cement concrete work with 1:1.5:3 for in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) Including mixing laying, curing, consolidation excluding side shuttering etc., complete, supply of all labours, materials, tools & plants etc., Supply of all materials, labour, tools and plants, scaffolding etc completed. All as directed

Dismantling Wash basin, I.W.C./E.W.C Pan of all sizes including disposal of dismantled materiaincluding malba all complete as per directions of Engineer-inCharge, supply of all labours, materials, tools & plants etc., complete.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in Cement mortar 1:4 (1 cement : 4 coarse sand) simultaneously pointing wherever required as directed including providing through bond between existing wall including cost of all materials, labour, tools, scaffolding, curing,and all other charges for foundation & plinth / in Superstructure.

Foundation & Plinth & Superstructure

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in :Cement mortar 1:3 (1 cement : 3 coarse sand) simultaneously pointing wherever required as directed including providing through bond between existing wall including cost of all materials, labour, tools, scaffolding, curing,and all other charges for foundation & plinth / in Superstructure.

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.

With cement mortar 1:4 (1cement: 4 coarse sand)

Providing second class teak wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length.Supply of all materials, labours, tools & plants, transportation and all other charges etc., complete.

Providing and fixing Second class teak wood fully panelled/ fully Glazed shutters for Doors, Windows ,ventilator and cupboard with 12 mm tk. marine plywoodand approved quality with heavy duty Aluminium fittings/fixtures & Brass Screws at all heights as per standard drawing and directed including cost of all materials,labours,tools and plants and all other charges etc., complete.

35mm thick panelled with 12mm thick marine plywood with necessary teak wood beadings etc

35mm thick panelled with 12mm thick marine plywood with necessary teak wood beading, and providing GI sheet as per drawing

Providing and Fixing 16mm dia MS round bar as window Guard bars

Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. With second class teak wood beading 62X19 m

25mm thick shutter with glass panel for windows & Ventilator with fixed glass/glass Louvers, Beeding ( without Frame)

Providing and applying Painting with synthetic enamel paint of approved 1st quality and colour of approved brand of Asian ( Apcolite) / Berger( HI gloss)/ Dulux ( Super Gloss) in alternate band for window grill / rolling shutters of Steel Surfaces of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with Zinc chromate paint of approved brand and manufacture. including cost of all labour, materials, scaffolding, tools and plants,curing etc., complete. ( Grill)

Providing and applying white cement based putty of average thickness 1 mm, of approved brandand manufacturer (Asian/ Berger), over the plastered wall surface to prepare the surface even and smooth complete.supply of all labours, tools, scaffolding , materials, etc. complete.

Providing and applying priming coats with primer of approved brand and manufacture (Asian/ Berger), having low VOC (Volatile Organic Compound ) content with water thinnable cement primer on wall surface having VOC content less than 50 grams/litre ( Interior & Exterior, over false ceiling )supply of all labours, tools, materials, etc. complete.

Providing and applying interior surface with two coats of Wall painting with premium acrylic emulsion paint of interior grade,having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour Berger -(Bison)premium Quality , Asian paints premium quality Royale etc and and Dulex premium quality ( Velvet Touch Platinum Glo) brands and approved colour new surface after cleaning and scrapping the old worn out paint and,including cost of materials, brushes, labour, , tools, and plants, rope, ladder, etc.

Painting two coats or more coat Exterior wheather paint (APEX ULTIMA) the old work with First quality of approved manufactures on undecorated wall surface, Ceiling surface to give an even shade including thoroughly brooming the surface to remove all dirt, dust, mortar draps and other foreign matter ete., applying one coat of cement primer including the cost of supply of all labours, materials, tools & plants,scaffolding and ladder,brushes, puttywhere ever required, transportation and all other charges etc., complete. (All buildings and compound wall)

Providing and laying vitrified floor tiles in Size of Tile 600x600 mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with epoxy and matching pigments etc complete., supply of all labours, materials, tools & plants, transportation etc., complete.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc complete., supply of all labours, materials, tools & plants, transportation etc., complete.

Providing and fixing concept design (300 x 450) Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade etc complete., supply of all labours, materials, tools & plants, transportation etc., complete.

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing, moulding and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab of colour Black, Cherry/Ruby Red or equivalent etc complete supply of all labours, materials, tools & plants, transportation etc., complete.

Extra for fixing granite stone beeding , over and above corresponding basic item of kitchen and wash basin platform, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete

Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality . Square shape dimensions ( 0.60 x0.60m)

Re fixing of EB Board and water pump motor

Providing and laying bricks tilesof size 230 x 230 mm at all heights of approved quality & size over sloped roof slab as water proofing course provided with cement mortar 1:3 (1 cement 3 coarse sand of approved first quality) of 12mm thick including laying, pointing with Cement mortar 1:3 (1 cement 2 coarse sand)in joints with neat finishing as directed cost including mixed with water proof compound in mortar & pointing, curing, supply of all materials, labours, tools & plants and all other charges etc, complete.

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:

White Vitreous china Orissa pattern I.W.C: pan of size 580x440 mm with integral type foot rests

Replacement of unserviceable/ damaged/ broken fittings of doors, windows, Ventilators, Cupboards shutters and as wherever directed with new Aluminium/S.S. fittings (Heavy duty) fitted with brass screws, including removing old fitting and replacing new fittings of approved quality I.S.I. mark heavy duty including supply of all materials, labours, tools etc. complete as directed by the engineer in charge.

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Single rubber stopper

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.

80x1.25 mm M.S. laths with 1.25 mm thick top cover Code Description Unit Qua

Supplying and fixing of MS Square 100 x 100mm Square MS tubular section for the verticalsupport of new rolling shutters

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer’s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with

12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks)

Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete

Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete 25mm dia

Supplying and fixing of curtain cloth of approved quality and design over the newly fixed curtain rod with necessary hooks, clamp etc as directed.The rate including cost of material, stitching charges, all labour, tools and plants charges etc complete.

Removal of existing old wooden pelmet / old curtain cloth which are in damaged condition from the postion etc complete as directed , cost including all labour, tools and plants charges etc complete. (Pelmet removal)

Chequerred precast cement concrete tiles 22mm thick in footpath & courtyard , jointed with neat cement slurry mixed with pigment to match the shade of tiles , including rubbing and cleaning etc, complete on 20mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand ) Dark shade pigment using ordinary cement mortar

Varnishing with varnish of approved brand and manufacture: Melamine polishing on bamboo wood wall panelling at conference Hall (one or more coat). The rate including the cost of materials, labours, hire charges of spraying machine, tools and plants etc complete.

Removing the working table / lights and cup boards from the inside of account section during the false ceiling work and rearranging same in position after completion etc as directed.