Construction of Panchayat office Building at Kondalam H/O Kondalam in Kabilarmalai Block of Namakkal District under AGAMT II 2025-26 Work-3 KBM-3

Amount

Construction of Panchayat office Building at Kondalam H/O Kondalam in Kabilarmalai Block of Namakkal District under AGAMT II 2025-26 Work-3 KBM-3

Earth work excavation and depositing on bank with initial lead and lift in hard gravelly soil as per SS20 B for foundation etc complete

Cement Concrete in 1 : 4 : 8 mix using 40 mm metal including cost and conveyance of all materials to site and labour charges etc complete

Collection and supply of gritty gravel from appd quarry including cost and conveyance of all materials to site including all labour charges for filling etc.complete,

Brick work in following Cement Mortar using best quality Fly ash bricks of size 23x11x7cm for foundation and basement including curing etc.,complete complying with standard specification.

Supplying and errecting shuttering including necessary support for plane surface including all R.C.C Works etc., Complete.

Below Ground Level

Above Ground Level

R.C.C. 1:1.5:3-using 20mm ISS HBGS metal including cost and conveyance of materials and labour charges etc. complete

Supplying, fabricating and placing in position inild steel or ribbed tor steel and all reinforced cement Concrete works as per the design given including cost of steel and binding wire in all floors etc complete complying with Standard (MS rods or RTS rods) which will be supplied departmentally at section stores and cost will be recovered at issue rate. The binding wire shall be supplied by the Contractor.

Weathering Coarse using Brick Jelly lime concrete in the proportion 32:12.5 etc complete

Finishing the top of floor using pressed tiles in CM 1:3 mixed with Water Proof compound etc complete.

Plastering with C. M 1: 3 mix, 10 mm thick including cost and conveyance of all materials to site and labour charges etc complete.

Plastering with C. M 1:5 mix, 12 mm thick including cost and conveyance of all materials to site and labour charges etc complete.

Supply and fixing Cuddapah slab of 20/30mm thick including labour charges etc complete

Plastering with C. M 1: 4 mix, 20 mm thick including cost and conveyance of all materials to site and labour charges etc complete.

Floor finishing with granolithic cement concrete 1:2:4 to a thickness of 25 mm (One cement, Two Sand and four broken granite metal)using 10 to 12 mm ISS Broken Hard granite metal including watering whenever necessary and paid in lay not more than 15 cm compacting etc., complete complying with standard specification.

Dadooing of walls with colour glazed tiles of size 300x200x6 mm of best quality including cost and conveyance of all materials to site and all labour charges etc complete.

Paving the flooring with special type of flooring tiles (Cement based Hydraulically pressed Anti skid tiles (20mm thick) in CM 1:3, 20mm thick including cost and conveyance of all materials to site and all labour charges etc complete.

Paving the flooring with special type of flooring tiles (Cement based Hydraulically pressed Anti skid tiles (20mm thick) in CM 1:3, 20mm thick including cost and conveyance of all materials to site and all labour charges etc complete.

Oil Distempering Two Coats over Plastering Surface including cost and conveyance of materials and labour charges etc complete

Painting two coats with approved Plastic Exterior emulsion Paint over one coat of Primaring coat of Plastic exterior emulsion over cement plastered wall surface, ceiling and other new surface including cleaning, preparing the surface, curing, scaffolding charges etc., complete complying with standard specifications and as directed by the departmental officers.

Painting two coats over new iron work using synthetic enamal paint including cost and conveyance of all materials to site etc complete

Supply of steel doors and windows including cost and convyance and all charges etc complete.etc complete

Steel Door 1.10 x2.10m

Toilet Door 0.75 x2.10m

Toilet Door 1.00 x1.80m

Steel Window 1.50x1.30m

Steel Window 1.20x1.30m

Collapsible Gate 1.20x2.10m

Supply and fixing of Rolling Shutter including cost and conveyance of all materials to site etc complete SI. No. 121 (a)

Labour charges for fixing of Steel Door inposition including all labour charges etc. complete.

Towards the labour charges for fixing steel Windows and Ventilators in position etc complete

Supply and fixing of Oriya Type Indian Water closet 580mm x 440mm with "P" or "S" Trap including all Charges etc. complete.

Supply and fixing of European Water closet with "P" or "S" Trap with Double Flapped seat and seat cover with Brass Hinges and 10 litre capacity PVC low level flusing tank with all internal fittings including all Charges etc. complete.

Supply and fixing of Wash Hand Basin of size 550mm x 400mm with all accessories such as cast iron brackets, 32mm dia C.P. waste coupling, rubber plug and chain, 32mm dia 'B' Class G.I. waste pipe, 15mm dia G.M. wheel valve, 15mm dia nylon connection, 15mm dia brass nipples, 15mm C.P. pillar tap etc. (SI. No. 180(i)

Supplying and fixing P.V.C rainwater down fall pipe of 110mm dia with necessary shoes, bends,& clamps etc.,

Supply and delivery and fixing of HDPE Water tank as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc., Capacity - 1000Litres

Wiring with 2x1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. switch and making good of the concealed portion with suitable colour for PVC concealed light / Fan Point (For electronic regulator) (5 Points Per Coil) SD 23

Supply and fixing of 1200 mm (48") sweep AC ceiling fan complete with stepped electronic 300W regulator, with 1 metre down rod with fan clamp with side plates and cross arm of size 450 mm (18") SD 106

Wiring with 2x1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 x l00 x 113 mm TW switch box for 5 A 3 pin non inter locking Wall socket with 5A Flush type switch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC plug point. SD 36

Supply and run of 2 of 1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade on 7/20 GI bearer wire for service connection mains SD 64

Supply and run of 2 of 4 sq.mm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in 25mm dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron upright and end supports for mains SD 71

Supply and fixing of TNEB meter Board suitable for 32A Single Phase service connection with 32A Fuse unit (500V)32A neutral link and earth link (1" x 1/8" Copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting W reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit.(SD No.125)

Supply and fixing of WT bulk head fitting with guard (Philips / Bajaj / Crompton / K. Lite) suitable for11W CFL lamp with CFL. SD 83

Supply and fixing of Single box type 4*40W flu fitting complete with copper choke and condensor with conduit pipe suspension from the ceiling with unsheathed copper leads from terminals tot fitting with tube (SD 89)

Supply and fixing of 32 Amps DPIC Switch of 500 V with fuse and neutral (Side Handle) on suitable TW box PWD Earthing SD 144

GST Amount for providing Service to Government Contract Works for the above RENEWAL Works. { GST Amount is the Total GST Amount for overall quoted amount above this row in column "BB" for all works in this package} (Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD)

GOPAL & CO (BID ID -1293464)