Providing New 5 HP Centrifugal Booster Motor With Motor Room in Ward No 04 Sivaji Nagar

Earth work open excavation and depositing on bank with in the initial lead of 10m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders etc. complete. complying with std. specifications.SS 20 A

Plain Cement Concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification

Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification

Supplying and delivery of Three phase CENTRIFUGAL MONOBLOC PUMPSET AS PER IS 9079/2002 WITHOUT PANEL BOARD THREE PHASE with 500 LPM against 35m Head confirming to ISI Mark IS 8034 With Panel Board etc complete as per standard specification(Rates including all taxes)

Supply and delivery of Three phase panel Board with two level Guard and Auto start of reputed make confiriming to ISI standard specifications (Upto 6HP TWAD Schedule Item No.11.0)

Labour Charges for erection of Horizontal shaft, centrif ugal pumpset (Coupled/Monoblock) in bore well/Open well including fixing of suction pipe and foot valve upto a maximum depth of 7 metres and delivery pipes to the required length with valves, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPIC switches starter, Voltmeter, Ammeter, Capacitor single phasing preventor and laying and jointing the cables and twin earthing as per IE rules including providing bed blocks etc., complete and operating the pumps and trial run for 10 days including signing of completion of reports as required by EB authorities.

Supply and delivery of following GI & PVC pipes as per ISI standard specifications 63 A Fuse Carrier

63 A Fuse Carrier

3 Kvar Capacitor

6 x 4 PlyWood

36 W Flu Fittings

0 Wats Bulb

DI Sluice Valve 100mm

DI NRV 100mm

DI bend 90 x 100mm

DI Tee 100mm

250MM DI SPIGOT/FLANGED Taile spies

GI Reducer 100 x 65 mm

GI Reducer 100 x 50 mm

MS Flange 100mm

GI Barrel Nipple 50 x 300 mm

GI Barrel Nipple 65 x 300 mm

DI Bend 50mm

GI Elbow 100mm

GI Tee 100mm

MS Bolt Nut 3 x 5/8

2" GI Elbow

Rubber Isertion Sheet 3 ply RI sheet

Quick Setting Cement

Algrid oil

Spun Yarn

4" GI Pipe

250 x 100 DI Tee

Supply and fixing of 63A Three phase 500V 4 Pole Change over Switch on suitable angle iron frame work with MS cable entry boxes with PWD earthing.

Wiring with 2 x 1.5 sqmm (22 /0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. switch with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed light point / Fan point (For Electronic regulator). etc, complete as per standard specifications. SD 23

Wiring with 2 x 1.5 sqmm (22 /0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 150 x 100 x 113 mm TW switch box with 3mm hylum sheet cover for 5A 3 pin non inter locking CS plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point.etc, complete as per standard specifications SD 38

Supply and run of 2 of 1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour.etc, complete as per standard specifications SD 54

Lowering the following sizes of DI Pipes (K9 /K7 Class) and specials into the trench and laying to proper grade and alignment for depth upto 2 m and as directed by TWAD Board Officers.(TWAD 24-25 )

Jointing the C.I/ D.I Double flanged pipes and specials with rubber insertion to with IS- 638(1979) and M.S. bolts and nuts of IS 1364-1(2002), including cost of jointing materials suchas bolt and nuts Rubber insertion and labourcharges etc., complete.

Roofing with Galvanised Coruugated Iron Sheet of 0.8mm thickness - 10 m2 Galvanised iron corrugated sheets (including 15 cm. Lapping) 0.8mm thick

Flyash Brick Partition Walls using II class ground moulded chamber bricks of size 9"X43/8"X 23/4" in C.M 1:3 (One part of Cement and Three part of Crushed Stone Sand (M- Sand)) using hoop iron reinforcement,if found necessary standard specification including finishing, curing,etc., complete complying with standard specification - 10 sqm Ground Floor.

Plastering with cement mortar (1:5) 12mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications

Refilling with excavated soil (other than sand) complying with the standard specification for filling in foundation and basement