PROVN OF TWO ELEVATED SENTRY POSTS in Samote TOILET BLOCK BATHROOM WITH SEPTIC TANK AND SOAKAGE PIT in Tain and Chassana UNDER AGE REASI OF GE NAGROTA

Amount

SCHEDULE-A PART-I M & L for Surface dressing n. exc. 15cm deep in any type of soil. complete all as specified & directed.

M & L for Exc. In trenches n.exc. 1.5m wide and n.exc1.5m wide and n.exc 1.5m deep and getting out in any type of soil. complete all as specified & directed.

M&L PCC 1:4:8 Type D2( using 40mm graded crushed stone agg) , as in fdn filling and mass concrete. complete all as specified & directed.

M&L Brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean radius with old size bricks (best quality) built in CM 1:6. complete all as specified & directed.

M&L RCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs,under-reamed piles and mass concrete all as per specified and directed

S & F Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.

M & L for Reinforced cement concrete Nominal mix. Type B1 1:2:4 ( 20 mm graded aggregate) in columns,pillars, piers posts and struts complete all as specified and directed

M&L RCC 1:2:4 type B-1(using 20mm graded crushed stone aggregate) as in lintel and over 1.50 mtr height complete all as specified & directed.

S&F Form work to sides of concrete foundation, footing, bases of columns,raft and raft beams, sides and soffits (if any) of foundation and plinth beam and similar work . complete all as specified & directed.

S&F Form work to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.for fair finished surfaces complete all as specified and directed

M & L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar ork; not exceeding 200mm thick for fair finished surfaces complete all as specified & directed.

M & L for Reinforced cement concrete Nominal mix. 1:2:4 type B1 (20 mm graded stone aggregate) in Slab supported on walls beams and columnsin floors roofs landingsn balconies canopies, deck slabs and in shelves and the like complete all as specified and directed

M&L mild steel TMT bars 10mm dia and over, cut to length bent to shape required including cranking binding spirally for hooping for column hooking and binding with MS wire annealed not less than 0.9mm dia or securing with clips complete all as specified and directed

M&L Mild steel TMT bars 5mm dia and over, upto and including 10mm dia as in stirrups, spacers and binders. complete all as specified & directed.

M&L for Rendering 15mm thick in two layers [base layer 10mm in CM 1:4 & finishing layer 5mm thick in cement mortar (1:4)] using water proofing compound in 2nd layer only on brick work or concrete surfaces of wall, surfaces finished even and smooth using extra cement and two coats of cement base paint over one coat primer complete all as specified and directed. Note : WPC shall be measured and paid for separately

M & L for Rendering 10mm thick cement plaster on other than fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement and applying three coats of white wash on newly plastered surface incl preparation of surface complete all as specified and directed

M & L for Rendering 10mm thick cement plaster on other than fair faces of brick work or concrete surfaces in cement mortar (1:6) complete all as specified and directed

M & L for Preparation of newly plastered surfaces of wall and applying two coats of Oil bound distemper over one coat of primer incl 1mm thick wall putty complete all as specified and directed.

M & L for Rendering 10mm thick cement plaster on ceiling surfaces in cement mortar (1:3) incl two coat of white wash complete all as specified and directed

Supply only Integral water proofing compound complete all as specified & directed.

M&L for Hardcore of gauge n exc. 63mm, deposited, spread andlevelled in layers n exc. 15cm thick, watered andrammed to a true surface complete all as specified & directed.

M&L 75 mm thick Cement concrete 1:4:8 type D-2 using 40mm graded agg as in sub base of floors. complete all as specified & directed.

M&L 25mm thick Cement concrete 1:2:4 type B-0 using 12.5mm graded aggt as in floors. complete all as specified & directed.

Material & Labour Machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified & directed.

M&L Non - skid jointless ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 all as specified and directed.

M&L for coloured glazed ceramic tiles (designer Pattern, HL) in vertical surface 350 x 250 x 7 mm / 450 x 350 x 7 mm /450 x 300 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match tiles including 10mm thick rendering in CM 1:4 on brick wall complete all as specified and as directed .

S&F Roof trusses (framed) trussed, purlin, crane gantries, plate, rail and fastening and heavy brackets framing ( Beams, Tee, angle, channel or flat section) incl. distance pieces, cleat etc. confirming to Fe-410-W (Gde-E-250) quality A complete all as specified & directed.

M&L painting two coats over a coat of red oxide primer to new steel surface of description incl preparation of surfaces over 10 CM width or girth, not other wise described. complete all as specified & directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & directed.

Supply & Fix Anodised aluminium snap grid frame work for false ceiling all as specified. (Size of grid 605 X 605 mm) complete all as specified and directed.

Supply & Fix 6mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws.) fixed in ciiling surface complete all as specified and directed (Make Everest or equivalent as specified in CA).

S&F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification and drawing. complete all as specified & directed.

S&F Factory made solid PVC door shutters 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with slovent cement, suppling and fixing in the frame at site as per specification and drawing.

S&F Butt hinges medium weight cold rolled mild steel 100mm and fixed. complete all as specified & directed.

S&F Aluminium anodised, barrel tower bolt of extruded section and fixed 150mm. complete all as specified & directed.

S&F Aluminium handles cast type anodised 150mm. complete all as specified & directed.

M&L, 50mm thick PCC (1:3:6) type C1, using 20mm graded stone aggregate as in plinth protection laid in panel alternate bays not exc 2.00 sqm with 6mm wide joints and joints filled with mastic fillings, finished even and fair complete all as specified & directed.

S & F Steel windows/ventilator with tubular frame factory made with double shutter (wire gauged shutter & glass/glazed shutter, (wire cloth and glass panes shall be measured and paid separately) of size 79mmx39mm,16 gauge rectangular tubular frame with side hung shutter with glazing bars 12x3mm flat iron incl box type hinges with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts 100mm long and 10mm square bar grills complete, two coats of synthetic enamel paint over one coat of red oxide primer all as specified & as shown on drg .

S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.00mm and fixed with tinned tacks, or galvanised wire staples complete all as specified & directed.

S & F Steel windows or ventilators, fixed type, with glazing bars all as specified & as shown on drg .complete all as specified & directed.

S&f Figured glass, pin head type and glazing with oil putty in square n.exc 0.5 Sqm in each pane 3.00mm thick. complete all as specified & directed.

S&F GI tubing medium grade with all fittings and fixed complete to walls are laid in floors 15mm. complete all as specified & directed.

S&F GI tubing medium grade with all fittings and fixed complete to walls are laid in floors 20mm. complete all as specified & directed.

S&F GI tubing medium grade with all fittings and fixed complete to walls are laid in floors 25mm. complete all as specified & directed.

S&F Bib tap 15mm bore fancy type chromium plated ,cast copper alloy with capstan head screwed down for iron pipes complete all as specified & directed.

S&F 15 mm bore dia fancy type Pillar taps, castcopper alloy, withcapstan heads,chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed.complete all as specified & directed.

S&F dia Cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1, 75 mm dia of outlet. complete all as specified & directed.

S&F PVC (SWR) bends any radius 75mm bore of pipe. complete all as specified & directed.

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls. complete all as specified & directed.

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid, in trenches or in floors complete all as specified & directed.

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid, in trenches or in floors. complete all as specified & directed.

S & F PVC (SWR) junction single (Single T) equal or unequal with acess door, 110 mm dia. complete all as specified & directed.

Returning filling in incl spreading, leveling watering and well ramming in layers n. exc 25 cm thick. complete all as specified & directed.

Removing surplus soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified & directed.

S&F Vitreous China Ware Wash hand basin white, flat back, size 210 x 580 x 460 x mm size with long padestal,32 mm Waste fittings, brass,chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed 32mm dia stainless steel waste coupling of including cutting for and pinning ends of brackets or erecting stand complete all as specified & directed.

S&F Vitreous china pedestal pattern type white wash down water closet pan with Antimicrobial Solid Seat Cover but excluding flushing cistern and flush pipe of( Make Parryware or equivalent) fixed complete all as specified and directed.

Supply & Fix Vitreous China Squatting pan, 'Orissa' pattern, size 580 x 440 mm white with integral foot rests (Make Parryware or equivalent) fixed complete all as specified and directed

S&F PVC body valve less syphonic action type flushing cistern white low level with inlet ball valve float and handle including brackets 10 Ltrs capacity fixed complete all as specified and directed .

S&F PVC connections suitable for 15mm bore with nuts of length 600mm each (superior quality) complete as specified and as directed by Engineer-in-Charge.

S&F Grating doom 100mm dia of PTMT ( Minimum weight 25 gms)complete all as specified & directed.

S&F 1000 ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified & directed.

S&F 20mm bore Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified & directed.

S&F Soap dish,vitreous China white, approximate size 160x 160x90mm, fixed to plugs with chromium plated brass screws complete all as specified & directed.

Supply only Integral water proofing compound complete all as specified & directed.

Supply & Fixed 15 mm CP angle cock chrome finish cast copper alloy, with wall flange complete all as specified & directed.

S&F Toilet paper holder, vitreous China,box type.complete all as specified & directed. .

S&F PVC (SWR) vent cowl 110 mm bore. complete all as specified & directed.

S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement. complete all as specified & directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in any type of soil complete all as specified & directed.

M&L PCC 1:2:4 Type B2( using 40mm graded crushed stone agg) , as in fdn filling and mass concrete. complete all as specified & directed.

S&F framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, reailing, framework of watertanks and similar work conforming to Fe-290, gde E-165. complete all as specified & directed.

S&F towel rail 600mm long of PTMT fixed with and including chromium plated brass screws and plastic cleats. complete all as specified & directed.

Supply and Fix in repairs Health faucet (Hand shower) with 1metre flexible tube with wall hook, Chromium Plated (Jaguar Johnson/Parry ware or equivalent) all as specified and as directed by the Engineer-in-Charge.

S&F Shelf of PTMTfixed with and including chomium plated brass screws and wooden/ plastic cleat (minimum weight 300gms) complete all as specified & directed.

S&F 20mm Gun-metal, globe or gate valves,with iron wheelhead,screwed both ends for iron pipe and fixed complete all as specified & directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and directed.

M&L coloured rubberised Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with grey cement and pigment complete all as specified and directed.

Supply only Fine aggregate (sand) for laying floor finishes complete all as specified and directed.

M&L PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in copings, Kerbs including necessary formwork etc complete all as specified & directed.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m depth for fdn etc or for shaft well,cesspits,manholes, pierholes etc n. exc.10 sqm on plan and n. exc 1.5m in depth and getting out in any type of soil complete all as specified & directed.

M&L concrete bed to drain pipe incl packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) for 150mm bore pipe complete all as specified & directed.

M&L SGSW pipe 150mm dia bore type ‘A’ laid in trenches on concrete bed and jointed complete all as specified & directed.

M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean in radius built in CM 1:4 complete all as specified & directed.

M & L for Rendering 15mm thick on fair faces of bricks in CM 1:4 finished even and smooth without using extra cement using WPC @ 3% of cement. complete all as specified & directed.

M&L for Extra for forming fair finished drain of channel 30 cm inner girth complete all as specified & directed.

M&L for PCC 1:2:4 type B2 as in surface channels and drains complete incl necessary formwork complete all as specified & directed.

M&L for Precast cement concrete slab for Manhole cover of type B-1, 1:2:4 (using 20 mm graded crushed agg.) set in CM 1:6 incl formwork complete all as specified & directed.

M & L for Construction of Septic tank,for 100 user as per drawing No CE/TD-1202/2003 Sh 1/2 and 2/2.complete all as specified & directed.

M & L for Construction of Septic tank,for 25 user as per drawing No CE/TD-1202/2003 Sh 1/2 and 2/2.complete all as specified & directed.

M & L for Construction of Soakage wells (Brick Construction) size 1.8 mtr dia X 4.50 mtr deep s per drawing No CE/TD-1202/2003 Sh 1/2 and 2/2.complete all as specified & directed.

M & L for Construction of Soakage wells (Brick Construction) size 1.2 mtr dia X 3.00 mtr deep s per drawing No CE/TD-1202/2003 Sh 1/2 and 2/2.complete all as specified & directed.

SCHEDULE-A PART-II M&L for point wiring with PVC insulated sheathed 1100 volt grade FRLS cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and in existing PVC conduit of any size , fixing acessories inculding sunken anodised pressed terminal box not less than 1.2 mm thick covered with 3 mm thick bakelite laminated sheet cover of suitable size with suitable size screws for mounting switches, sockets, regulators with and including 1.5 sqmm FRLS multi stranded copper conductor drawing as continuous earth wire connected to main earth and earth dolly one light/fan point /bell point accerries complete all as specified & directed.

All as per Srl item N0 94 above but for one socket out let 5 Amp controlled by one switch on same board with other switch complete all as spd & directed

All as per Srl item N0 94 above for one socket out let 5 Amp controlled by one switch on independent board with other switch complete all as spd & directed.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 2.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 2.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and unwelded sunken galvanized pressed steel terminal box of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for one 16 amp socket outlet controlled by one switch on independent board complete all as spd & directed.

Supply and fix 10 watt LED Bulb complete all as spd & directed.

Supply and fix lamp holder insulated body with back plate suitable for battern fittings complete all as specified and directed at site.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as spd & directed.

S&F switch piano flush button single pole one way 6 amp complete all as spd & directed.

S&F Switch socket combination 2 in 1, 3 pin, 6 and 16 Amp flush type universal complete all as spd & directed.

S&F socket outlet 2 in 1, 2 & 3 pin, 6 amp, flush type complete all as spd & directed.

S&F socket outlet flush type 2 in 1, 3 pin, 5 and 15 Amp, 230 volt complete as directed.

S&F polycarbonate switch piano flush button single pole one way 15 amp 240 volt ISI Marked.complete all as spd & directed.

S&F ceiling rose 6 amp, 3 plates polycarbonate body complete all as spd & directed.

M&L for Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as spd & directed.

Supply and fixing LED lights fitting 1x 20 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as spd & directed..

S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. complete all as spd & directed.

S&F MCB distribution board SPN, 240 volts, 8 way powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 200 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required. complete all as spd & directed.

S&F MCB distribution board SPN, 240 volts, 4 ways double door powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 200 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required. complete all as spd & directed.

S&F MCBs as per load requirement 'C' series of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of following ratings:-

(a) Single pole 6 to 40 amp.

(b)Single pole and nuetral 10 to 40 amp.

(b) DP 05 to 40 amp.

Excavation in trenches in any type of soil not exc. 1.5 m wide and not exc. 1.5 in depth for laying of cabel or pipes (where provided for protection of cable) etc. and getting out trimming the sides, forming bottom surfaces to require level complete all as specified and directed

Returning filling in including spreading levelling watering and well ramming in layers not exc. 25 cm thick each complete all as specified and directed

Removing excavated material to a distance not exc. 50 mtr and depositing where directed at a level not exc. 1.5 mtr above the starting point of any type of soil complete all as specified and directed

M & L for sand cushioning with a layer of sand 80 mm thick before laying of cable and 150 mm thick after laying of cable in trenches complete all as specified and directed.

M&L for un-reinforced precast concrete cable cover class LV, type 2, flat of size 300X180X40 mm for protection of cable laid transversally along the length of cable complete all as specified and directed.

Supply,Laying and testing XLPE insulated armoured heavy duty electric cable with aluminium conductor,1100 volts grade cross sectional area 10 sqmm 2.0 core cable complete all as specified and directed by Engineer in charge.

Supply,Laying and testing XLPE insulated armoured heavy duty electric cable with aluminium conductor,1100 volts grade cross sectional area 4 sqmm 2.0 core cable complete all as specified and directed by Engineer in charge.

Tubes, 'light grade', galvanised, with all fitting; laid in trenches for road/drain crossing of size 25 mm complete all as spd & directed.

Screwing existing steel tubing for alterations or additions (or lengthening screw on pipe to form connector) complete all as spd & directed.

S&F PP-R Gate valves 20 mm bore (brass insert) as per requirement of the site complete all as spd & directed.

S&F PP-R Gate valves 25 mm bore (brass insert) as per requirement of the site complete all as spd & directed.

S&F Tubes, 'meduim grade',20 mm galvanised, with all fitting; laid in trenches complete all as spd & directed.

S&F Tubes, 'meduim grade',25 mm galvanised, with all fitting; laid in trenches complete all as spd & directed.

M/S KALSI ENGINEERS AND CONTRACTORS (BID ID -3374921)