Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹80,000
Closing Date
29 Dec 2023, 11:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Hubli Electricity Supply Company Limited
ANIL KUMAR GS
Construction of complaint section, UG service centre and other allied works at Nehrunagar Belagavi
HESCOM/2023-24/BD/WORK_INDENT128
HESCOM/2023-24/BD/WORK_INDENT128
Open
Buildings
Two Tender Document System(Two Cover)
HESCOM Superintending Engineer (Civil)Corporate Office Hubli
24 documents required · 24 mandatory
Details of Key Personnel along with appointment/ consent letters as stated in section 3.3 (C) of General conditions in bid document to be deployed for project.
Contractor shall have PAN Card.
Contractor shall be an ESI registration holder.
The Contractor shall have his establishment registration certificate from Department of labour.
Contractor shall be an EPF registration holder.
Contractor shall be a GST registration holder.
Tenderers shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by the Government of Karnataka.
Name, address, and telephone, and fax numbers of the Tenderers bankers who may provide references if contracted by the Employer should be uploaded.
The name, contact address, land phone no and mobile no of the tenderer should be uploaded along with passport photo.
To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2018-19, 2019-20, 2020-21, 2021-22 and 2022-23, achieved minimum annual financial turnover of (in all classes of civil engineering construction works only) as stated in section 2. Clause 3.2 (a) of General conditions in bid document.
To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2018-19, 2019-20, 2020-21, 2021-22 and 2022-23, Satisfactorily completed as prime contractor, at least one similar work of value not less than 50% of Amount put to Tender as stated in section 2. Clause 3.2 (b) of General conditions in bid document.
Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as stated in section 2. Clause 3.6 of General conditions in bid document.
Details of Key Personnel along with appointment/ consent letters as stated in section 3.3 (C) of General conditions in bid document to be deployed for project.
Contractor shall make availability by owning/hiring the key and critical equipments for this work as stated in section 2. Clause 3.3 (a) of General conditions in bid document.
To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2018-19, 2019-20, 2020-21, 2021-22 and 2022-23 executed in any one year, the minimum quantities of work as stated in section 2. Clause 3.2 (c) of General conditions in bid document.
Tenderer should furnish the license copy of Electrician proposed to be deployed on this contract and work done certificate for Electrical works of value not less than 50% of Electrical works in the contract as stated in section 2. Clause 3.2 (d) of General conditions in bid document.
Tenderer should furnish the license copy of Plumber proposed to be deployed on this contract and work done certificate for water supply, sanitary and drainage works of value not less than 50% of water supply, sanitary and drainage works in the contract as stated in section 2. Clause 3.2 (e) of General conditions in bid document.
The Tenderer at his own responsibility and risk should visit and examine the Site of Works and its surroundings. The site inspection certificate issued by concerned Assistant Executive Engineer (Civil) of respective Circle and counter signed by Executive Engineer (Civil) of respective Zone should be obtained and uploaded, failing which the bid will be rejected.
₹810
₹80,000
15 Dec 2023
15 Dec 2023
31 Dec 2023
25 Dec 2023
Construction of complaint section, UG service centre and other allied works at Nehrunagar Belagavi
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removalof stumps of trees cut earlier and disposal of unserviceable ...
Earth work in surface excavation for stripping, seating of bund, Road way, by manual means for lowering & leveling the ground for all works other than foundation & depth in all kinds of soil not exce...
Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and te...
Providing crushed stone aggregate, depositing on a prepared surface by hauling vehicles, spreading and mixing with a motor grader, watering and compacting with a vibratory roller to clause 407...
Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tr...
Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tr...
Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tr...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tr...
Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tr...
Supplying, fitting and placing TMT FE 550 /550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying...
Providing and laying Autoclaved Aerated Cement blocks masonry with 100 mm thick AAC blocks as per IS 2185 (Part III) in super structure above plinth level up to floor I level in cement mortar 1:4 (1 c...
Providing 18mm thick cement plaster in single coat with cement mortar 1:6, to brick masonry including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, inc...
Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, prov...
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin, UV resistant, dirt & pick up resistant, Alkali & Water resistant of required shade: New work...
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less tha...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth c...
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound )content less than 50 g/L of approved brand and manufacture, including applying additional co...
Providing and fixing M.S.grill work for windows and ventilators weighing 21kg/Sqm using M.S. flats, or M.S. square rods, or combination of M.S. flats and square rods as per approved design, drawing ...
Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm ap...
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manufacture includ...
Providing & fixing of glazed 3 Track - 2 Panel Sliding Window With Mesh made out of multi chambered uPVC sections with TPv gaskets having isolated drainage and reinforced with GI throughot the window....
Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPV(Thermo Plastic Vulcanized) and lead f...
Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, lai...
Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement con...
Providing edge moulding to 18mm thick Granite stone counters, vanities etc
including machine polishing to edge to give high gloss finish etc. complete
as per design approved by Engineer-in-charge.
Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...
roviding and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar, bent
to shape with hooked ends in R.C.C. slabs or beams during laying,
including painting the exposed portion of loop, all as p...
Providing and fixing 1.8 times wide curtains for window fashion fabric of approved make with verticle wrincles, wimported thread titling mechanism for easy titling operation, with nylon imported threa...
viding and fixing chromium plated brass curtain rod with ISI mark having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever ne...
Providing and erecting overhead High end Acrylic company name board with approved text and design with all provisions for self illumination with LED illuminaries, clamps, adhesive, fasteners for fixin...
Providing Teak wood frames of doors, windows,clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side...
Fixing of door frame in an existing opening including embeeding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...
Providing and fixing in position fully panelled Honne wood shutters for
doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm
wide top rail and stiles 100mm wide as per drawing...
French spirit polishing :Two coats on new works including a coat of wood
filler to give an even surface including preparing the surface after thorougly
cleaning oil, grease, dirt and foreign matter,...
Providing and fixing bright finished brass hanging type floor door stopper
with necessary screws, etc
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 m...
Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.
Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete.
Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete.
Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete.
Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5 mm (heavy type)
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :250x10mm
Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete. 65mm
Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete. 75mm
Providing and fixing 50 mm bright finished brass cup board or wardrobe knob of approved quality with necessary screws.
Providing and fixing bright finished brass handles with screws etc.complete: Brass handles 125 mm with plate 175x32 mm
Providing and fixing bright finished brass handles with screws etc.complete:Brass handles 100 mm with plate 150x32 mm
Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. Triple strip vertical type
Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. Double strip (horizontal type)
Providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc complete as per directions of Engineer- in-charge
Providing and fixing sliding arrangement in racks/ cupboards/cabinets shutter by with stainless steel rollers to run inside C or E aluminium channel section (The payment of C or E channel shall be mad...
Concealed Conduit System Supplying Heavy Gauge PVC Conduit pipe 19/20 mm dia 2mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before ...
Concealed Conduit System Supplying Heavy Gauge PVC Conduit pipe 25 mm dia 2mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before con...
Concealed conduit System, Supplying Heavy Gauge PVC Conduit Pipe 19/20mm dia 2mm thick with suitable size bends, metal/PVE junction boxes adhesive paste etc., by groove cutting in the wall & fixing by...
Point Wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC conduit / casing capping using 1100V grade, COPPER conductor flexible multi strand FRLS PVC insula...
Point Wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC conduit / casing capping using 1100V grade, COPPER conductor flexible multi strand FRLS PVC insula...
Point Wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC conduit / casing capping using 1100V grade, COPPER conductor flexible multi strand FRLS PVC insula...
Supplying 6A flush type socket and 6Amps flush type SP switch either surface / flush mounting in existing gang box or in a 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring...
Supplying and mounting 2 Nos of 2 way 6 amps flush type switches either surface/flush mounted on existing gang box or in 4mm thick plastic sheet and mounted on a flush mounted wooden box and wiring as...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS...
Supplying type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles,Single phase AC supply conforming to ISS-374-1979 and with double ball bearing ...
Fixing a ceiling/Wall mounting fan of all capacities and all types to the existing 'S' hook with fan regulator to the existing board together with supplying and fixing a 5 amperes ceiling rose, necess...
6 amps Lamp Holders
6 Amps Bake lite Ceiling Rose
Supplying & fixing of porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers etc., complete. 63 Amps
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve , indicator ON/OFF, energy cross-3 with Short circuit breaking c...
Supplying and fixing one of 230 volts Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws. Ding Dong Bell with Remote
1 To 3 Model Metal Boxes
4 Model Metal Boxes
6 Model Metal Boxes
8 Model Metal Boxes
10-12 Model Metal Boxes
1 To 3 Model plates for boxes
4 Model plates for boxes
6 Model plates for boxes
8 Model plates for boxes
10-12 Model plates for boxes
6 Amps one way Switches
6 amps 2 way Switches
6 amps 3 way socket
16 Amps one way Switches
16 amps universal socket
32 Amps DP Switch
LED Light Fitting 1 x 4 - 20/22 watts
LED Squre or Round Down Light 10 -12 Watts
LED Squre or Round Down Light 15 -18 Watts
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 600W Dimmer
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.1000-1200W Dimmer
Supplying and drawing UTP-CAT 6E LAN cable.
Supplying and drawing PVC flexible one pair telephone unarmoured tinned copper cable. 1 Pair
Supplying and drawing PVC insulated gas injected physical foam jelly flooded co-axial TV cable.RG-6.
Supplying & Fixing of switch mounting rack with power manager & Cable manager.4U with 450mm depth
Supplying & Fixing of Power strip
8 Port 10/100/1000 Switch
Supplying & fixing of I/O socket with back box Single I/O
Supplying & Fixing of ... ms Cat 6 Patch Cable 2 m
Supplying and fixing of MDF krone junction box with KRONE Module / Telephone cable termination10 Pair
Providing and fixing Free Standing Table for Cabin - without frames consisting of 25mm thick table top finished with 1.0mm sunmica as per selection, edges finished with Teak wood beading, 18mm thick ...
Providing matrial made of polypropylene dimension 26x26x41 inches, brand Featherlite ,it has AC 70 mesh, fabric upholstered cushion seat, single lock synchro mechanism, one way adjustable arms and ny...
Providing visitors chair with legs stainless steel, brand Featherlite ,it has AC 70 mesh, fabric upholstered cushion seat ,style modern and contemporary with dimensions 55x80x44 cm, adjustable arms an...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
BOQ 128.pdf
Others - BOQ • 0.20 MB
Tender document 128.pdf
Tender Document • 0.36 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .