Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.0 LAccepted-AOC | L1 | Accepted-AOC Accepted | |
| 2 | L2₹29.5 L+₹2.5 L (9.44%)Rejected-AOC 4 1 70 1 ROAD NO 11 SNEHAPURI NACHARAM HYDERABAD 500 076 | HYDERABAD | MEDCHAL MALKAJGIRI | TELANGANA | 500076 | L2 | Rejected-AOC Rejected being non L1 | |
| 3 | L3₹32 L+₹5.0 L (18.5%)Rejected-AOC 184 C 13 THURAIYUR SAMINATHAN NAGAR PERAMBALUR SALAI TIRUCHIRAPPALLI TAMIL NADU 621010 UDYAM TN 27 0052941 | TIRUCHIRAPPALLI | TAMIL NADU | 621010 | L3 | Rejected-AOC Rejected being non L1 | |
| 4 | L4₹33.7 L+₹6.7 L (24.8%)Rejected-AOC OLD NO 2C NEW NO 7 1 THANGAVELU VAITHIYAR STREET CORPORATION MIDDLE SCHOOL TRIPLICANE CHENNAI 600005 | CHENNAI | TAMIL NADU | 600005 | L4 | Rejected-AOC Rejected being non L1 | |
| 5 | L5₹36.0 L+₹9.0 L (33.4%)Rejected-AOC 3 358 PALLICKAL KRISHNALAYAM PAKALKURI PO VARKALA THIRUVANANTHAPURAM KERALA 695604 | VARKALA | THIRUVANANTHAPURAM | KERALA | 695604 | L5 | Rejected-AOC Rejected being non L1 |
Tender Value
₹39 L
EMD Value
₹78,000
Closing Date
27 Mar 2025, 6:00 pmClosed
GE Tirunelveli
Garrison Engineer Naval Post Base Vijayanarayanam Tirunelveli -627119
PROVISION OF 04 HIGH MAST LIGHT AT KATTABOMMAN UNDER GE TIRUNELVELI
2025_MES_699448_1
GE/TVL/8441/E8 of 2024-25
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
Vijayanarayanam
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE Tiruelveli
₹78,000
Yes
4 Jun 2025
27 Feb 2025
29 Mar 2025
27 Feb 2025
27 Mar 2025
13 Mar 2025
28 Feb 2025 - 10 Mar 2025
Amount
Supply & installation of galvanized steel high mast lighting system of 12.5 metre height in two sections, of thickness 3 mm, top dia 150mm, bottom dia 360 mm, Base plate of thickness 25mm & dia of 520mm , 12 side polygon of mast cross section and 900X250mm opening door at base, GI single spike of length 1200mm lightning protection, designed for max wind speed 180 Km/Hr, 6 Nos of foundation bolts, TS 600/25mm dia 850mm long foundation bolts 600mm (ID) dia carriage ring Winch/Power tool Make : Integral double drum, 50:1 Gear ratio SWL 500 Kg flame proof integral motor operation 1.5 HP of motor capacity single speed reversible 415 Volts/240 Volts 6 pole single speed with motor and manual operation self lubricant in permanent oil bath of lubricant 90/140 facility of torque limiter with 2X6 mm dia stainless steel rope system including required quantity of incoming cable of suitable size from LT panel to 6x400W light fittings and 1.5 HP motor and all required standard accessories complete all as specified and directed by Engrin-chage. Make: Crompton Greaves/Utkarsh/DVP
MATERIAL SPECIFICATIONS 1. Housing in Die cast Aluminium powder coated in RAL-7032 shade 2. Frame in Die cast Aluminium powder coated in RAL-7032 shade 3. Internal Wiring in 19/30 multistranded Teflon coated wire. 4. Mains Terminal in 1 no 3 way 10 amps suitable for terminating max. 2.5 sq mm incoming cable. 5. Earthing suitable for 14 SWG earthing wire. 6. Surge Arrestor 1 No. 5KV
ELECTRICAL PARAMETERS DRVP150W/700 EDC-150S105SV Rated Voltage (V) 240 240 Frequency (Hz) 50 50 Operating Voltage 120 - 270 140 - 300 Range(V) Current (A) @ 240V 2.08 2.08 Wattage (W) @ 240V 400 400 PF 0.95 ~ 1.00 0.95 ~ 1.00
Supply, laying in trenches or passing through pipes, ducts or drawn across roads/paths/drains of fixed along poles/walls/floor etc, including connecting up, testing and commissioning of Cross Linked Polyethylene (XLPE) insulated, Screened, PVC bedded, Galvanized steel strip armoured electric power cable , heavy duty, with aluminium conductor 1100 Volts 35 Sqmm 3.5 Core complete all as specified and directed.
Material and labour Flood light fitting LED type 400 Watt, 42700 lumen output, made up of pressure die cast housing, asymmetric wide beam with IP 66 protection, lens design & optical integration with single die ceramic base high power LED to ensure uniform distribution and maintenance free system compete all as specified and directed by Engr-in-Charge. Make: PHILIPS, Cat No BVP485 LED427 CW AWB PSU SPD GR or equivalent in Crompton Greaves/ HAVELLS
Material and labour for Foundation for High mast light of RCC M25 grade, clear cover 50mm, chairs at footing with steel Fe 500 all as per drawing including excavation, earth work,RFR etc complete as shown on drawing attached with the tender complete all as specified and directed. Note:- Foundation bolts will be measured and paid separately.
Material and labour for Foundation bolts for High mast light 06 nos of size M25 dia of 850mm long as recommended by manufacturer complete all as specified and directed.
Material and labour for erection of the high mast light with the help of suitable tools and plants, wiring of luminaries with all materials for wiring, including commissioning and testing on completion all as specified and directed.
Excavation in trenches n.exc 1.5 M wide and n. exc 1.5 M depth and getting out in hard/dense soil complete all as specified and directed.
Returning, filling in incl spreading leveling, watering and well ramming in layers n.exc.25cm thick complete all as specified and directed.
Removing excavated material to a distance n.exc 50 M and depositing where directed at a level n.exc 1.5 M above the starting point complete all as specified and directed.
Supply and laying GI tubing, light grade 40mm dia on trenches/fix on poles /walls/ road crossing for cable protection complete all as specified and directed.
Supply, spreading and compacting of riddled earth obtained from trenches for cable ducts/ trenches for cable cushion on both top and bottom of cable, including ramming as specified
Supply and lay burnt bricks for cable protection of sub class 'B' standard size in trenches complete all as specified and directed.
Supply and fix LED aviation light twin type made out of pressure die cast housing with clear acrylic cover for fixing on high mast light all as specified.Make: CG Cat Part No GLN 704 or equivalent in Utkarsh/DVP
Supply and fix CPRI approved outdoor pedestal mounted feeder pillar box, double door with IP 43 degree of protection, made out of CRCA sheet of thickness 3.0 mm supported by equal angle of size 50x50mm including provision of 32 Amp, 50 Hz, 10 KA, 'C' curve, TPN MCB incomer, single dial time switch 25 Amps, TP contactor for automatic switching of luminaries power tool control with 9 Amps contactors and raise lower push button including cable entry base plate with cable gland at base for Incoming 35 Sqmm and out going 16 sqmm & 2.5 Sqmm terminals all as specified and directed.
Material and labour for trenchless boring of road, pavement, hard standing without damaging outer surface including making good disturbed surface with cement mortar complete all as specified and directed
Material and labour for earthing complete with GI plate electrode 60cm ×60cm.× 6.0 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less 'than 1.5 metres below normal ground level, connected to 32×6mm GI strip as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 5 connected to earthing including earth pit with funnel and protection pipe for strip upto funnel and earth chamber to mast panel all as specified or indicated including testing on completion all as specified and directed.
SIRITEL SYSTEMS PRIVATE LIMITED (BID ID -3266412)
NLK Construction (BID ID -3265553)
NAVEEN ENTERPRIESES (BID ID -3266515)
M/s VJ ENTERPRISES (BID ID -3264244)
Vinayaga constructions (BID ID -3267296)
B5BUILDING SOLUTIONS (BID ID -3267027)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .