REPAIR TO BOUNDARY COMPOUND WALL FENCING PATH AND DRAIN AND OTHER WORK AT STN ROAD MAUDE ROAD ESD FOL DEPOT AIRPORT ROAD MAP KABUL LINES UNDER AOR OF AGE BR II OF GE NORTH DELHI CANTT 10

Amount

Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground, complete all as specified and directed.

Dismantling of fencing wire mesh, any type, complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid and bedded in any morter complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not other wise provided complete all as specified and directed.

M&L for plain cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete, complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stone work and precast articles, complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius in cement mortar 1:6 complete all as specified and directed.

All as per the description of srl item No 8 above but except bricks.

M&L for rendering 15mm thick on fair faces of brick surfaces or concrete surfaces and finished surfaces even & smooth without using extra cement in CM 1:4 with liquid water proofing compuund as per manufacturer's instructions including fair finishing to top surface as directed. Note:- The liquid water proofing compound will be measured and paid separately.

Supply only liquid water proofing compound.

M&L for mild steel angle iron posts and struts, MS flat iron fillet securing chain link fencing confirming to FE-290 E-165 as in fencing including cutting tops for required shape, drilling holes, bolting, notching for wire including all necessary drilling of similar work, complete all as specified and directed.

Supply only Chain link fencing including wires, mesh of size 50 x 50mm, weight not less than 3.0 Kg/Sqm conforming to IS, type standards rails, straining bolts etc including provision of binding wire, complete all as specified and directed.

Fixing only chain link fencing including line wire, any mesh, size and type to any type of standards, rails, straining bolts etc. including provision of binding wire, complete all as specified and directed.

M&L for mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

S&F in repairs galvanized, 2 strand, steel barbed wire 2.24mm dia., barbed with 2mm dia., barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanized mild steel pins etc.as directed (each line wire to be measured).

Restraining & resecuring existing barbed wire of any type including making good staples etc any type of standard rails straining bolts including securing or tying at crossings with and provision of galvanised mild steel wire staples or steel pins etc (each line wire to be measured) complete all as specified.

S&F MS screw bolts (machine made) with hexagonal or square heads at one ends and screwed the other, or screwed both ends, each screwed end to be fitting with washer and one hexagonal or square nut n.exc. 5cm long and dia of shank 8 to 10mm etc.

M&L preparation of new surface, priming with red oxide / zinc chromate and applying two coats of synthetic enamel (ordinary tint) painting to steel and iron surface of any description over 10cm in width or girth not otherwise described.

Preparation of new plastered/unplastered surfaces of walls and applying three coats of white wash, complete all as specified and directed.

M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces all as specified and directed.

M&L for granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 20mm thick with admixture of pigment to match with shade of granite including 12mm thick rendering in CM 1:3 as backing coat for receiving of granite complete all as specified and directed.

M&L for matt finish exteior wall tiles 8 to 10mm thick & not exc 0.18 sqm , colour & shade of tiles as approved by Engr-in-charge, set and jointed in neat cement slurry and pointed in coloured cement to match the surface etc complete all as specified and directed

M&L for preparing new plastered or un-plastered surfaces of walls and applying two coats of acrylic exterior emulsion paint over a coat of acrylic primer complete all as specified and directed.

Preparing old decorated/plastered or un-plastered surfaces of walls by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coat of acrylic exterior emulsin paint complete all as specified and directed.

M&L for preperation of new plasterd or unplasterd surface and applying two coats of cement base paint of approved tint over a coat of acrylic primer complete all as specified and as direcred.

Demolition of plain /reinforeced cement concrete for any thickness in any position and of any discription complete all as specified and as diredted.

M&L cement concrete 1:2:4 type B1 (20mm graded crushed stone aggregate) in lintels upto 1.5 m clear span cills, holdfasts, steps, seismic and other similar bands,plinth courses, string courses lacing courses parapets and railings upto 60 cm in height copings, kneelers apex stones, bed plates, kerb not provided for water troughs and the like including weathering slightly rounded or chamfered angles and throating complete all as specified and as diredted

M&L for plain cement concrete M-10, nominal mix, type C-1, using 20mm graded mechanically crushed stone aggregate, 75mm thick as in plinth protection etc., surface finished even and smooth without using extra cement and laid to a slope of 1 in 24 in alternate panels n.exc. 1.20 Sqm each, 12mm wide and 5 cms deep joints shall be formed between the bays and shall be filled with mastic filling comprising a mixture of one part of heated blown bitumen VG-10 and two parts of heated coarse sand (by volume), all as specified & directed. Note:- The unit rate include for use of form work (straight or curved).

M&L for 75mm thick PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in subase of floor, complete all as specified and directed.

M&L sand filing under floors or in foundations including watering and consoldation complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block of colour Red/Yellow glossy type any shape and size, as approved by Engr-in-Charge conforming to IS 15658-2006 of 60mm thickness, M-35 grade complete all as specified and directed.

M&L coloured chequered cement concrete tiles 30cm x 30cm x 25mm thick machine pressed set and jointed in neat cement slurry and pointed with grey cement & pigments as in floors over and including 15mm thick screed bed or bedding layer of mortar CM 1:6 complete all as specified and directed.

S&F PVC(SWR) pipes, 75mm external dia double socketed in any length with rubber joints, fixed to walls etc with MS clamps including dismantling of cast iron, AC / PVC pipes including all fittings and accessories of 100/75mm dia and in any position complete all as specified.

S&F PVC (SWR) bends suitable for 75mm external dia with or without access door complete all as specified and directed.

S&F PVC (SWR) junction single, (single T&Y) equal or unequal with or without access door conforming to IS: 14735, suitable for PVC soil waste discharge pipe of 75mm dia complete all as specified and directed.

S&F PVC (SWR) pipes, 110mm external dia, type-B, ISI marked (IS:13592) double socketed in any length with rubber ring joints, fixed to walls etc with MS clamps including dismantling of cast iron, AC / PVC pipes including all fittings and accessories of 110/75mm dia and in any position complete all as specified and directed.

S&F PVC (SWR) bends suitable for 110mm external dia with or without access door complete all as specified and directed.

S&F PVC (SWR) junction single, (single T&Y) equal or unequal with or without access door conforming to IS: 14735, suitable for PVC soil waste discharge pipe of 110mm dia Complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in surface channels, drains, side guide wall including all necessary form work complete all as specified and directed.

M/S R.M. Builders (BID ID -3094047)

The new hut furnitures (BID ID -3092529)

DEEP ASSOCIATES (BID ID -3087812)

V M CONSTRUCTION (BID ID -3083340)

PUNEET CONSTRUCTIONS CO. (BID ID -3094186)

VDM GROUPS (BID ID -3079316)

QUALITY CONSTRUCTIONS CO (BID ID -3085731)

MAA SANTOSHI ENTERPRISES (BID ID -3092635)

S GOURAV PRAKASH ENTERPRISES (BID ID -3087670)