Special repair to building No T 54 T 55 and T 70 (OR line) at RGB in Hussainiwala Enclave of 3 Grenadiers and other sanctioned works under GE (West) Ferozepur Cantt

Amount

Taking down cement plaster from brick walls of any description, racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L rendering 15mm thick in cement mortar 1:4 on any face of brick walls or conrete surfaces, surfaces finished fair and even complete all as specified and directed.

M&L rendering 10mm thick in cement mortar 1:6 on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 12mm thick in cement and sand mortar 1:3 mixed with water proofing compound @ 3% by weight of cement contents on fair faces of brick or concrete surfaces, finished even and fair without using extra cement complete all as specified and directed.

M&L rendering 5mm thick in cement mortar 1:3 on ceiling surfaces, finished even and smooth without using extra cement and preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L preparation of newly plastered surfaces of walls and applyings two coats of cement base paint over a coat of primer complete all as specified and directed.

M&L preparation of new plastered surfaces wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

M&L complete removal of existing treatment on wall / ceiling surfaces, including cornices, pilasters, etc, by scrapping down with wire brushes and removing existing loose finishes, particles, apply after finishing wall surface with wall care putty to get fair finish on that two coats of acylic (100%) exterior emulsion paint over a coat of external cement primer complete all as specified and directed. Note : Form work/scaffolding shall deemed to be included in the quotated rate. Make (Paints): Asian paints (Apex Ultima)/Berger paints (weather coat all guard)/Jenson & Nicholson (safe guard) Make (Wall care putty) : Birla Wall care putty and JK White Putty etc

Demoltion of brick work built in cement mortar of any specification and in any position complete all as specified and directed.

M&L brick work in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius complete all as specified and directed.

All as per ser item No. 10 here-in-before but using old bricks retrieved from demolition under item 09 here-in-before including cleaning and removal of mortar from old bricks.

M&L brick work with sub class B bricks straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed.

Taking down chowkkats or frames area not exceeding 1.5 Sqm each (Without taking off shutters from the frames) complete all as specified and directed.

All as per ser item No: 13 here-in-before but exceeding 1.5 Sqm and not exceeding 4.0 Sqm

M&L cutting holes in brick wall exceeding half bricks but not exceeding one brick in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1, as required complete all as specified and directed.

S&F factory made box type side hung steel window with pintal hinges & 2 Nos 150 mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEJZ/TD-06/07 & CEJZ/TD-07/07.

S&F factory made box type side hung steel window with pintal hinges & 2 Nos 150 mm mild steel tower bolts to each shutter, steel handle and without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEJZ/TD-06/07 & CEJZ/TD-07/07.

S&F factory made box type steel ventilator side/top hung with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEJZ/TD-06/07 & CEJZ/TD-07/07.

S&F mild steel, plain, black sheet 0.80mm thickness in wall cladding, steel gates and similar work, cut to size, holes punched, including round headed screws, cloud nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc as required complete all as specified and directed.

S&F framed work Fe 410-W (Gde E-250, quality 'A') as in doors or gates of angle or other section with gusset plates, rails, braces, etc, complete drilled for fixing of steel sheeting or other covering, door, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete all as specified and directed.

S&F pressed steel frames made of 1.25 mm thick mild steel sheet of profile 125 mm X 60 mm for door and window frames with one or more rebates including lock strike plate, shock absorber, 20 mm dia 60 mm long mild steel conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified and directed.

M&L cement concrete 1:3:6 type C-1, as in coping, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

M&L PCC 1:3:6, type C-1 using 20mm graded stone aggregate as in filling of steel chowkhats complete all as specified and directed.

S&F 300mm long mild steel, sliding door bolt, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including bolts and nuts complete all as specified and directed.

S&F mild steel pressed handle, oval type, 125 mm size, stove enameled black and fixed with steel screws, complete all as specified and directed.

S&F 200 mm mild steel barrel tower bolts stone enamelled black with bright bolt and fixed complete all as specified and directed.

S&F 150 mm floor door stopper of Aluminium alloy body and tongue, anodized with hard drawn steel spring as fixed in repair complete all as specified and directed.

M&L galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified.

S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples in repair complete all as specified .

Hacking out old broken glass from metel frame including punching or drilling out old glazing pins/spring clips and providing and fixing new complete all as specified and directed.

S&F 3 mm thick ordinary quality sheet sheet glass glazing with oil putty and glazing clips fixed complet to wooden/steel window not exceeding 0.5 sqm in each pane complete all as specified and as directed.

Taking down Aluminium windows shutters only (area exceeding 0.5 sqm but not exceeding 1.5 sqm each) and dismantling all members and reassembling the same with and including new screws, new rubber gasket & new Aluminium cleats of existing make and also refixing the locks & rollers in existing position with and including new screws including refixing the window shutters in same opening complete all as specified & directed.

S&F Powder coated of (any colour) Aluminium window, ventilator etc fixed / sliding or pull and push type in shutter frames or shutters with two/three track sliding Aluminium frame of approved size, including necessary joining cleats, glazing clips, powder coated Aluminium snap beading, screws, including necessary anodised Aluminium fittings like handles etc complete all as specified as per manufacturers instructions. Note: EPDM Rubber beading/gasket will be measured and paid for seperatley. Make: Jindal /Hindalco or Equivalent make

S&F EPDM Rubber beading around glass in Aluminium windows /ventilator shutters.

S&F for double action floor spring hydraulically regulated made up of minimum 1.25mm thick Aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and as directed.

S&F 100 mm long Aluminium mortice lock,vertical type four levers complete all as specified and directed.

S&F 4.8 mm thick sheet glass ordinary quality and glazing with oil putty in square exceeding 0.5 Sqm in each pane complete all as specified and directed.

Dismantling of floor hearth and wall tilling including mortar beding removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L non skid ceramic coloured (colour & shade as approved) tiles (square or rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.16 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

S&F of glazed coloured and cereamic tiles in vertical surfaces 300mm x 200mm and 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including backing coat 10mm thick in cement mortar 1:4 for laying skirting dados and vertical surfaces all as specified and directed

Demolition of stone slabs and tiles laid bedded pointed in mortar of any description or thickness in floors, aprons etc. complete all as specified and directed.

M&L machine pressed precast conctete interlocking paver block of any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade including laying of sand cushioning, etc, complete all as specified and as directed. Note :- Sand will be measured and paid seperately

M&L sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for sand cushioning to under ground cable in trenches/existing cable trenches/ducts in layers of 8 cm deep before laying the cable and 15 cm deep after laying and stretching the cable complete all as directed.

M&L 50mm thick plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregates) as in sub base of floor complete all as specified & directed.

M&L 75mm thick plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregates) as in sub base of floor complete all as specified & directed.

M&L 100mm thick PCC 1:2:4 type B-2 (using 40mm graded stone aggregates) as in sub base of floor complete all as specified & directed.

M&L forming contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound complete all as specified and directed.

M&L 75 mm thick cement concrete 1:3:6 type B-1 (using 20mm graded stone aggregate) as in plinth protection, shall be laid in 1:20 slope. The concrete shall be laid at a stretch not exceeding 3-meter in length. Joint gap between the adjoining slab, at corners and at junctions of wall shall not exceed 10mm in width and shall be sealed with mastic filling i.e. one part of bitumen of grade 85/25 garde mixed with 3 part of sand. Top surface of concrete shall be finished even and smooth without using extra cement. Joints shall be provided at not more than 3-meter interval at corner and junction walls complete all as specified and directed.

Demolition of reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L formwok to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (horizontal or sloping) complete all as specified and directed.

M&L for PCC 1:2:4, type B-1 (using 20 mm graded stone aggregate), 40 mm thick as in flooring of septic tank complete all as specified and directed.

Supply only integral water proofing compound.

S&F mild steel work as in rungs, handles and similar articles conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L providing RCC (Nominal mix) 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in wall or baffle/cantilever walls in septic tank and fixed in cement mortar including form work etc complete all as specified and directed.

M&L providing RCC (Nominal mix) 1:1.5:3 type B-1 (using 20 mm graded crushed stone aggregate) as in beams, cantilevers, bressumers, lintels over 1.5m span and similar work complete all as specified and directed.

M&L for RCC (Nominal Mix) 1:2:4 type B1 (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies,canopies, deck slabs and in shelves and the like or cover slabs of soak well etc complete all as specified and directed.

M&L for RCC (Nominal Mix) 1:1.5:3 type B1 (using 20mm graded stone aggregate) as in roof slabs ccomplete all as specified and directed.

M&L reinforced cement concrete (nominal mix) 1:1.5:3 slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves complete all as specified and directed.

M&L for RCC (Nominal mix) type B-1, 1:2:4 (using 20 mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L use and waste of formwork to sides and soffits of floor or roof beams, beam haunching, grider, bressummer, lintels, cantilevers, sleves including supports, over hang etc also splay between floor and beams to rough finish surface of concrete flat complete all as specified and directed.

M&L concrete bed to drain pipes of 150mm bore in PCC 1:3:6 type C2 using 40mm graded stone aggregate including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

M&L concrete bed to drain pipes of 200mm bore in PCC 1:3:6 type C2 using 40mm graded stone aggregate including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

M&L reinforced cement concrete pipes 150mm dia, laid and jointed with collars complete all as specified and directed.

M&L reinforced cement concrete pipes 200mm dia, laid and jointed with collars complete all as specified and directed.

M&L precast cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in cover slabs set in cement mortar 1:6 complete all as specified and directed.

S&F mild steel TMT bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, complete all as specified and directed.

All as per ser item No. 68 here-in-before but TMT bars of dia 6mm to 8mm.

Dismantling of wall and ceiling boards (Fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

S&F Gypsum board 6mm - 7mm thick in ceiling fixed with screw 60cmx60cm placed in ceiling (Angle 25mm X 25mm, Main tee 38mmX23mm ,Sub tee 23mmX23mm) including Aluminium anodised snap grid frame 605mmX605mm for false ceiling including hanging arrangement complete all as specified and directed.

Dismantling plain or corrugated AC/fibre sheet on roof covering complete all as specified and directed.

S&F pre-painted galvalume Aluminium Zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws complete all as specified and directed.

All as per ser item No 73 here-in-before but plain sheet

Dismantling of steel work including doors, gates but excluding framed truss etc complete all as specified and directed.

S&F mild steel work as in roof truss (framed) trussed, purlins crane gantries, rails and fastenings and heavy bracket framing (Beam tee, angle channel or flat sections) inclusing distance pieces, cleats etc Fe 410-W (Grade E-250) quality B complete all as specified and directed.

S&F rolled mild steel plates Fe 410-W (Gde-E- 250) quality- A (plain or chequered) channels, square cut or notched (ordinary and counter sunk ) forming holes without any attachment complete all as specified and directed.

S&F mild steel screw bolts of 12 mm dia (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, but length of bolt exceeding 15cm and not exceeding 22.5cm long complete all as specified and directed.

S&F steel curtain rod with fixing side brackets, end cups, rings @ 10 Nos per RM and fixed with PVC rawl plugs & steel screws as in repairs complete all as specified and directed.

S&F 1000 litre capacity rotational moulded, triple layer polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in position on roofs including fittings & dismantling existing water storage tank, complete all as specified and directed.

S&F 20mm bore brass ball valve high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed in repair, complete all as specified and directed.

S&F 15mm bore fancy type chromium plated stop cock cast copper alloy screwed down, high pressure screwed both ends for iron pipe or union of 15 mm bore fixed in repair complete all as specified and directed.

S&F 15mm bore bib tap fancy type of chromium plated cast copper alloy brass, screwed down screwed for iron pipe or for brass ferrule in repair complete all as specified and directed.

S&F 15mm bore pillar tap, fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe, in repair complete all as specified and directed.

S&F 15mm chromium plated wash basin mixer for mixing hot and cold water screwed down for iron pipe and fixed and waste system with 450mm long braided hoses in repair complete all as specified and directed.

S&F 125mm dia chromium plated grating doom with waste hole of PTMT (minimum weight 40 gms) in repair complete all as specified and directed.

S&F 600mm long chromium plated towel rail fixed to wall with steel screws and PVC rawl plug complete all as specified and directed.

S&F 125 mm chromium plated shower rose with or without swivel joints any size including fixing to steel pipe or union in repair complete all as specified and directed.

S&F PVC waste pipe with waste fittings, 32 mm bore size for sinks, WHB etc with long screwed shanks and fly nuts in repair complete all as specified and directed.

S&F steel sink with dranage board made out of 1mm thick stainless steel sheet in kitchen or laboratory with plug washers and waste fittings including bedding in cement mortar on dwarf wall, including fixing cantilever brackets and connecting unions to pipe overall size of sink 915mmx460mm and bowl size 410mmx330mmx160mm complete all as specified and directed.

S&F wash hand basin, flat back 550mmx400mm vitreous China (white) including PTMT waste fittings, 32mm bore size, waste pipe, PVC, 32mm bore, angle iron/cast iron brackets of required size as directed & making good disturbed surfaces to match with the existing as in repair complete all as specified and directed.

S&F PVC low level flushing cistern (white) of 10 litre capacity with inlet ball float valve, PVC flush pipe and necessary fixing arrangements and connecting to water pipe and WC etc and fixed in repairs complete all as specified and directed.

S&F seat cover (White colour) for pedestal pattern as fixed in repair complete all as specified and directed.

S&F pressure JET for EWC including PVC connection and chromium plated fitting as fixed in repairs and complete all as specified and directed.

S&F PVC connection 15mm x 600mm size with PTMT nuts in repair complete all as specified and directed.

S&F galvanised steel water tubes 15 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and as directed.

S&F galvanised steel water tubes 20 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and as directed.

Taking up or down 15 mm existing steel tubing and connections and Refixing old steel tubing and connections in new or old position complete to walls and ceiling or laid in floors complete including cleaning the steel tubing complete all as specified and as directed.

All as per ser item No. 99 here-in-before but 20mm dia.

Taking down eaves gutters and rainwater pipes(any size or pattern), including all fittings, heads, shoes, bends, swan-necks etc complete all as specified and directed.

S&F PVC (SWR) pipes single socketed 110mm bore in any length with rubber ring joints laid in trenches or fixed to wall with clamps and using solvent complete all as specified and directed.

S&F PVC (SWR) pipes single socketed 75mm bore in any length with rubber ring joints laid in trenches or fixed to wall with clamps and using solvent complete all as specified and directed.

S&F PVC (SWR) bends any radius 110mm bore with access door complete all as specified and directed.

S&F PVC (SWR) bends any radius 75mm bore with access door complete all as specified and directed.

S&F 75mm bore PVC (SWR) multi floor trap, plain with grating including jointing with solvent cement as in repair complete all as specified and directed.

M&L for preparation of old decorated wood or wooden based surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L preparation of old decorative steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint on steel surfaces complete all as specified and directed.

M&L preparation of new wooden or wood based surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F 3.15mm dia plain mild steel wire, galvanised class 3 as for mosquito nets and fixing to straining bolts, hooks, eyes, etc including straining and fixing to wood, concrete or steel posts and/or to straining bolts, including securing with and provision of galvanised iron tying wire, galvanised iron staples or steel pins, etc. complete all as specified and directed. Note: Each line of wire will be measured.

Surface dressing not exceeding 15 cm deep complete all as specified and directed.

Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5m deep and getting out for foundation of cess pits, soakwells etc in soft/loose soil complete all as specified and directed.

Excavating in trenches exceeding 1.5m wide and not exceeding 3.0 M deep and getting out for foundation of cess pits, soakwells etc in soft/loose soil complete all as specified and directed.

Excavating in trenches exceeding 3.0 m wide and not exceeding 4.5 m deep and getting out for foundation of cess pits, soakwells etc in soft/loose soil complete all as specified and directed.

Excavating over areas, not exceeding 1.5 m deep and getting out in soft/loose soil complete all as specified and directed.

Excavating over areas, exceeding 1.5 m deep but not exceeding 3.0 m deep and getting out in soft/loose complete all as specified and directed.

M&L plain cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundations complete all as specified and directed.

M&L for loose filling with aggregates of gauge 40 mm to 80 mm in soakage pits, soakage wells complete all as specified and directed.

Returning, filling in soils, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and directed.

Removing excavated surplus soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

M&L for 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

M&L for 110 mm dia PVC (SWR) cowl for vent pipe complete all as specified and directed.

M&L cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required for 100mm - 300mm dia pipe complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, fittings such as switches, ceiling roses, pendants, regulators sockets light fitting etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc. to match with the existing specifications complete all as specified and directed.

Taking down carefully unserviceable main switches and distribution boards with fuses/ MCB's (single phase or three phase) of any capacity all as specified and directed.

M&L point wiring complete with 1100 Volts grade PVC insulated unsheathed FRLS cable of copper conductor, multi stranded of size 1.5 sqmm, single core, in and including new rigid non-metallic PVC conealed conduit, surface conduit with all accessories if require such as bends,reducers, spacers, saddles, junction boxes bakelite sheets, wooden rectangular boards / round blocks(for housing lamp holders and light fittings etc) and existing MS pressed steel / cast iron sunken boxes of suitable size for mounting switches / bell pushes / sockets, fan regulator etc covered with new 3 mm thick laminated bakelite sheet top cover including continuous earth wire of size 1.5 sqmm unsheated stranded copper conductor with green PVC insulation connected to common earth dolly complete all as specified and directed for the followings :- (a) One light/fan/Bell Point controlled by one single pole one way switch.

(b) One socket outlet on the same board controlled by one single pole one way switch

(c) One 5 amps socket outlet independent controlled by one single pole 5 Amp switch.

All as per Item No 127 mentioned here-in-before but one three pin 15 Amps switch socket out let on the independent board with 2.5 Sqmm PVC insulated Copper conductor and 2.5 Sqmm copper conductor for continuous earthing complete all as specified and directed.

S&F switch piano flush type single pole one way 5/6 Amp complete all as specified and directed.

S&F switch piano flush type 15 Amps, single pole one way, complete all as specified and directed.

S&F socket outlet 2 in one, 5/6 Amps flush type complete all as specified and directed.

S&F socket outlet, 2 in one 6 pin 5 and 15 Amps piano flush type complete all as specified and directed.

S&F ceiling rose, PVC/Polycarbonate, isolated three terminals complete all as specified and directed.

S&F lamp holder PVC/Polycarbonate, isolated with back plate suitable for batten fittings including 10 Watt LED bulb Complete all as specified and directed.

S&F step type regulator piano switch type (5 step) for ceiling fan 1200/1400 mm size 230 volts, 6 ampere complete all as specified and directed.

S&F ceiling fans BLDC Type complete with blades, down rods, electronic regulator and accessories, 230 volt, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) Complete all as specified and directed.

S&F LED tube light fitting 20 Watt, 4 feet long decorative ultra slim linear LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient 230 volt, complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.

S&F sheet metal enclouser double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series pre-wired SPN DBs, 240 volts 200 Amps rated bus bar, Neutral link, Earth bar and Din rail, 8 way dust and vermin proof suitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified and directed.

All as per ser item No 140 above but SPN DB's 4 way.

S&F MCB, Single pole 240 volt, 6 Amp - 32 Amp 10 KA 'B Series complete all as specified and directed.

S&F MCB, Single Pole and neutral 240 volt, 32 Amps 10 KA 'B' series, complete all as specified and directed.

Earthing complete with galvanized steel plate elecrode of size 60 cm x 60cm x 6.0 mm thick burried directly in ground vertically to a depth not less than 2.5 meter below the ground level with top edge of earth plate at a depth not less than 1.5 meter below ground level. Earth plate surrounded by 15mm thick packed alternative layers of charcoal dust and comman salt, earth lead GI wire of 4mm dia (8 SWG) by means of bolts, nuts, check nuts and washers of galvanised iron with thimbles. The other end of GI earth wire is connected to main switch board and protected by light grade GI pipe of 15 mm bore. Provision of 20mm bore light grade GI pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horrizontally to the earth pit. Cement concrete chamber of PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate).The chamber shall be constructed one meter away from edge of earth pit. 50 mm thick pre cast cover of cement conrete 1:2:4 type B-1 (using 20 mm graded stone aggregate), excavation in soft / loose soil, returning filling and removal of surplus soil to a distance of 50 mm as directed and shown in Electrical Plate No- 3 of SSR Part-1 (2009).

S&F LED street light fitting 35 Watt 230 volt AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

Supply, laying, jointing and testing of cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured heavy duty electric cable with multistranded aluminium conductor, 1100 volts grade, laid in trenches or duct or passing through pipe or fixed to poles walls of size 25 Sqmm 4 core confirming to IS : 7098-1985 laid in trenches or passing through pipes/ducts or fixed to walls/poles complete all as specified and directed.

S&F galvanized steel tube 40 mm dia light grade for protection of cable complete all as specified and as directed

Supply and lay bricks of old size sub class 'B' type for protection of UG cable in trenches all as specified and directed.

S&F sub main wiring of 4 sqmm PVC insulated unsheathed FRLS cable multistranded copper conductor with earth wire of 4.0 sqmm PVC insulated unsheathed FRLS cable multistranded copper conductor including PVC conduit pipe 25 mm dia in repair complete all as specified and directed. Note: Two run of single core 4 sqmm cable and one run single core 4.0 sqmm cable for earth wire and including conduit pipe 25 mm dia shall measured as one length.

S&F sub-main wiring with two single core PVC insulated FRLS cable with Copper conductor unsheathed cable of size 2 x 6 sqmm drawn through in and including PVC Concealed with 1 x 6 sqmm PVC insulated copper conductor single core for continuous earthing complete including PVC conduit 25 mm dia complete all as specified and directed. Note : Two run of single core PVC insulated cable with Copper conductor unsheathed cable of size 6.0 Sqmm and one run of 6.0 Sqmm PVC insulated copper conductor single core, one run of PVC conduit shall be measured as single run.

M&L rendering 15mm thick in cement mortar 1:4 mixed with water proofing compound @ 3% by weight of cement contents on fair faces of brick or concrete surfaces, finished even and fair without using extra cement ccomplete all as specified and directed.

S&F exhaust fan, steel body AC single phase 230V of size 300 mm sweep with, blades and frame and louvers complete all as specified and directed.

Kissan contractor and engg works

PREM KUMAR BANSAL