REPAIR AND MAINTENANCE OF SUNKEN TREATMENT AND CONNECTED WORKS AT 7 AFH KANPUR CANTT

S & F in repair steel water tubing medium grade, galvanised with all fittings of 15 mm bore and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

Taking up or down Refixing old steel tubing and connections in new or old position (walls, ceiling, floors, etc) of 15 mm bore complete all as specified and directed.

S & F in repair steel water tubing medium grade, galvanised with all fittings of 20 mm bore and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

Taking up or down Refixing old steel tubing and connections in new or old position (walls, ceiling, floors, etc) of 20 mm bore complete all as specified and directed.

Cutting chases in brick wall built in cement mortar for concealed water tubing and making good with cement mortar in 1:3 ,cutting depth not exc 10 cm girth complete all as specified and directed.

S&F in repairs 15mm bore chromium plated cast copper alloy bib taps fancy type with flange complete all as specified and directed.

S&F in repairs 15mm bore chromium plated cast copper alloy pillar cock complete all as specified and directed.

S&F in repairs 15mm bore angle valves, cast copper alloy fancy type chromium plated with flange complete all as specified and directed.

S&F in repairs 15 mm bore concealed stop valves, cast copper alloy fancy type chromium plated with flange complete all as specified and directed.

S&F in repairs fancy type chromium plated bib cock 2-way double handle with flange complete all as specified and directed.

S&F in repairs fancy type chromium plated angle cock 2-way double handle with flange complete all as specified and directed.

S & F in repair 15 mm dia CP brass centre hole basin mixer with accessories in wash basin for mixing hot and cold water, screwed down for 15 mm dia bore GI Pipe complete all as specified and directed.

S&F jet spray (butterfly) with 1 mtr tube complete all as specified and directed.

S&F chromium plated overhead shower multiflow of complete all as specified and directed.

S & F in repair stainless steel grating round 100 mm size complete all as specified.

S&F in repairs brass chromium plated towel rail 600 mm long between flanges. Make : Prayag/Hindware/Parryware

S&F in repairs health faucet cock brass chromium plated including 1M long flexible pipe complete all as specified and directed

S&F wall mixture 15 mm dia with provision for over head shower with 115 mm long bend pipe on upper sizw connecting legs & wall flange, fixed with 15 mm GI pipe complete all as specified and directed.

S&F in repair mirror cabinet of size 446x505x125 mm, decorative type PVC frame, fixed with PVC rawal plug with CP brackets screw fixed, complete all as specified .

S&F in repairs toilet paper holder of Chromium plated complete all as specified and directed.

S&F in repair sheet glass shelf assembly consisting of 5.5mm thicksheet glassshelf with chromium plated guard and railing complete all as specified and directed.

S&F in repair soap dish, brass, chromium plated, fixed to wall with rawl plugs and chromium plated screws complete all as specified and directed.

S&F in repairs PVC waste pipe 32 mm dia, 800 mm long, complete all as specified,

S&F in repair kitchen sink with drainage board made of stainless steel 1.0 mm thick in kitchen with plug , washer and waste including bedding layer in CM (1:6) in wall as with fixing cantilever bracket and connecting union to pipes over all size 915x460 mm bowl size 410x330x160 mm including taking out unserviceable kitchen sink of complete all as specified and as directed.

M&L in repairs PVC flushing cistern push button / handle type of 10 ltr capacity , coloured complete with all fitting fixed to with WC including PVC flush pipes ,brackets complete all as specified and directed.

S&F in repairs one piece wall hung snow white extended with PP Seat cover and twin flush fittings of size EWC (655x365x755)mm,including Cat No S1031103 P/S trap,comprising of cistern campbell soft close seat cover, twin flush fittings complete all as specified and directed.

S&F in repair 550x400mm Wash basin, vitreous China (Flat back) including fixing and pinning in ends of brackets including brass waste coupling of requisite size and waste pipe complete all as specified and as directed.

S&F in repair 550x400mm Wash basin, vitreous China counter top including fixing and pinning in ends of brackets including brass waste coupling of requisite size and waste pipe complete all as specified and as directed.

M&L vitreous china squatting pan Orissa Pattern, size 580 x 440mm white with integral foot rest including connection to trap, and to flushing pipe, anti-syphonage pipe, etc, including Making Good disturbed Surfaces with Cement Mortar 1:3, complete all as specified and as directed.

M&L Vitreous China Wash down Water Closet Pan (Pedestal Pattern) White including fixing Bolts (excluding Flushing Cistern and Flushing Pipe) with Plastic Water Closet Seat, Black, Closed Pattern with Recessed Bottom and Cover including fixed-in-repairs, including Making Good disturbed Surfaces with Cement Mortar 1:3, complete all as specified and as directed.

S&F for plastic water closet seat cover colour/ white, closed pattern with flat bottom and MS CP or aluminised hinging device as in repair complete all as specified and directed.

S&F for brass CP waste coupling of size 32 mm dia WHB with long screwed shanks and fly nut fixed in repair complete all as specified.

All as per item No 32 here-in-before but 40mm size.

S&F in repair stainless steel kithen plate rack size 600X750X250 mm including all screws and fitings complete all as directed as specified and directed by Engr-in-charge.

S&F 20 mm bore gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe.

S & F in repair Swivel shower of PTMT any colour for fixing with 15 mm pipe, (Minimum weight 40 grms), complete all as specified and as directed.

S & F in repair Shower arm 15 mm size, 195 mm long with bend of 45 degree with flange of PTMT any colour, (Minimum weight 40 grms), complete all as specified and as directed.

S&F in repair fancy type Bib taps of PTMT any colour high pressure screwed for iron pipe and fixed (min weight 15 mm-105 gms) complete all as specified and as directed.

S&F in repair fancy type Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed (min weight 15 mm-120 gms) complete all as specified and as directed.

S&F in repair stop valve of PTMT any colour high pressure screwed for iron pipe and fixed (min weight 15 mm-90 gms) of Make Prayag or equivalent as approved by GE.

S&F in repair angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed (min weight 15 mm-90 gms) complete all as specified and as directed.

S&F in repairs rotational moulded polythene water storage tank of capacity 500 ltrs (Cylindrical/vertical with closed top), white colour, triple layer construction, ISI marked, hoisted & fixed in position complete all as specified and as directed.

S&F 20 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 20mm-210 gms) complete all as specified and as directed.

S&F in repairs 15 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 20mm-210 gms) complete all as specified and as directed.

S&F in repairs 25 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 20mm-210 gms) complete all as specified and as directed.

S&F lid for PVC tank for 500/1000 ltr capacity of tank with complete arrangements of fixing with existing tanks like as nuts and bolts, hasp and staple etc, all as specified and directed.

Demolition of cement concrte in ground floor and paving not exceeding 15cm thick (below or above ground level) complete all as directed by Engineer-in-Charge.

M&L 25mm thick cement concrete type B0, 1:2:4, (using 12.5 mm graded stone aggregate) as in sub base for floor.

Dismantling of floor, hearth , or wall tiling including cement mortar bedding ( but not backing ) removing serviceable tiles to store yard complete all as specified

M&L Coloured Glazed digital ceramic tiles(300x450)x7 mm thick or as required size of 7 mm thick vertical surface as dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over and including 15 mm thick plaster in CM 1:4 complete all as specified and directed.

M&L non skid ceramic digital tiles 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.09 sqm but not exceeding 0.16 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed..

M&L vitrified double charge/ultra charged digital ceramic coloured tiles 10 mm thick (square/ rectangular), light shade area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match, shade/coloured over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

M&L for 16-20 mm thick granite (of any type) work (table rubbed and polished) in steps jambs, pillers, window -cills cooking platforms and like in cement mortal (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, cutting and moulding edges over and including 20 mm thick screed bed in CM 1:6 complete all as specified and directed.

Demolitation of brick work built in cement or cement lime mortar including all quoins, achies, pillars complete all as specified as directed.

M & L Brick work with fly ash bricks, Straight or curved on plan exc. 6 m mean radius built in CM 1:6, complete all as specified and directed.

Taking down cement plaster on bricks or stone walls etc., including raking out joints, hacking for key scrubing down with water etc., all as directed.

M&L for rendering 15 mm thick on fair faces of brick or stone masonary of wall in CM (1:6) finished fair and evem without using extra cement complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick or stone masonary of wall in CM (1:4) finished fair and even without using extra cement complete all as specified and as directed.

M&L for rendering 10 mm thick on fair faces of brick or stone masonry in ceiling in CM (1:3) finish fair and even without using extra cement complete all as specified and directed.

M & L for preparation of new undecorated surfaces of walls and applying two coat of Oil Bound Distemper over a coat of primer and 1mm thick wall care putty, all as specified and directed.

M&L for preparation of surfaces and applying two coats of cement based paint on walls , all as specified and directed.

M&L for preparation of surfaces and applying three coats of white wash on ceilings, all as specified and directed.

M & L for cast iron floor trap with grating including jointing to waste pipes in cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate, 75 mm dia outlet complete all as specified and directed.

S & F 100 mm bore cast iron sanitary connection socket fixed to WC outlet etc complete all as specified and directed.

S & F in repair 75 mm bore cast iron soil waste and vent pipes in any length with or without ears with lead joints in trenches or in floors complete all as specified and directed.

Ditto all as per item No.67 here-in-before but for 100 mm bore.

S&F CI bends 100 mm dia complete all as specified and directed.

All as per item No 69.00 here-in-before but 75 mm dia.

S&F CI branch piece,single (single Y) equal or unequal 110 mm dia complete all as specified and directed.

All as per item No 71.00 here-in-before but 75 mm dia.

S&F CI single T equal or unequal 100 mm dia complete all as specified and directed.

All as per item No 73.00 here-in-before but 75 mm dia.

M&L 32 mm galvanised tubing medium grade as in spout pipe each 70 cm long, cutting to shape as required, cutting through wall of any thickness, fixing in PCC 1:2:4 tpe B-1 making god the damaged portion by rendering in CM (1:4) and finished the surface to match the existing surface complete all as specified.

Taking up asbestos cement pressure pipes, 100/75 mm (including all fittings), including disconnecting pipes and fittings complete all as specified and directed.

S&F PVC (SWR) pipe, 110 mm dia, single socketed in any length with rubber ring joints fixed to walls or laid in floor complete all as specified and directed.

All as per item No 77.00 here-in-before but 75 mm dia.

S&F PVC (SWR) bends 110 mm dia complete all as specified and directed.

All as per item No 79.00 here-in-before but 75 mm dia.

S&F PVC (SWR)branch piece,single (single Y) equal or unequal 110 mm dia complete all as specified and directed.

All as per item No 81.00 here-in-before but 75 mm dia.

S&F PVC (SWR) single T equal or unequal 110 mm dia complete all as specified and directed.

All as per item No 83.00 here-in-before but 75 mm dia.

S & F in repairs 450 mm long PVC connection 15 mm size with PTMT nuts complete all as specified and directed.

S & F in repairs 600 mm long PVC connection 15 mm size with PTMT nuts complete all as specified and directed.

M&L for MS Framed work such as grills with end bars shoulders/framed guard bars and similar work conforming to Fe-410 or 310 complete all as specifiewd and directed.

M&L preparation of new surfaces of steel and iron of any description over 10cm in width or girth not otherwise described, and applying two coats of synthetic enamel paint over a coat of red-oxide primer complete all as specified and as directed.

M&L for preparation of old decorated plastered surfaces or un-plastered surfaces of wall and applying one coat of white wash complete all as specified.

All as per item No 89 here-in-before but on ceiling.

M & L for complete removal of existing treatment of wall and preparation of old decorated surfaces including 1 mm thick wall care putty and applying two coats of oil emulsion distemper over a coat of primer complete all as specified and directed.

M & L for preparation of old decorated plastered surfaces of wall including filling wall care putty where required and applying one coat of oil emulsion distemper complete all as specified and directed.

M & L for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Ditto all as per item No 93 here-in-before but applying on steel surfaces.

M & L for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint complete all as specified and as directed.

Ditto all as per item No 95 here-in-before but applying on steel surfaces.

M&L preparing old plastered surface of wall and applying two coat of cement base paint over coat cement primer complete all as specified and directed.

M&L preparing old plastered surface of wall and applying ONE coat of cement base paint over coat cement primer complete all as specified and directed.

M&L for complete removal of existing treatment of wall preparing the surface and applying two coats anti algal weather proof, 100% Acrylic emulsion with silicon additives that offers an anti algal and high performance exterior wall finish complete all as specifie and as directed.

M&L for preparing the surface and applying one coats of with anti algal weather proof, 100% Acrylic emulsion with silicon additives that offers an anti algal and high performance exterior wall finish complate all as specified and as directed.

M&L plain cement concrete 1:7:12 with with 40mm graded stone coarse aggregate in sunken floor compete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:3 Mixed with water proofing compound on fair faces of brick or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and directed.

M&L for providing and applying two component cementitious elastomeric water proofing coating Damp Block 2K manufactured by M/s Asian paints Ltd or equelanent product of Sika, Fosrock, Berger, Shalimar in two coats @1.4 kg/sqm to build 1.00 mm thickness as per manufacturers specification. The first coat shall be applied @ 0.7 kg/sqm and while 1st coat still green the second coat shall be applied with a suitable and stiff brush @ 0.7 kg/sqm. The treatment shall be carried out both horizontal and vertical surface as per site requirement. Substantially curing to be done by ponding for 48 hours as directed by engineer-in-charge.

M&L for 75mm thick PCC 1:3:6 type C-2 as in plinth protection finish even and smooth without using extra cement with construction joints all as specified.

Taking down chowkats or frames not exc 1.5 sqm each but with shutters (without taking off shutters from the frame), all as directed.

All as per item No 105 but exc 1.5 sqm but not exceeding 4sqm each

Taking down shutters of any description but exc 1 sqm but n.exec 2 sqm each all as directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), inimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid or/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.all as specified and directed.

S&F 30 mm thick plain WPC factory made wire mess solid door shutters (conforming as per IS-4020) with density not less than 650 Kg/cum. Manufactured by an ISO : 9001-2015 certified company.The door to be pannened with SS mosquito mesh and XTN alluminium mesh for additional strength and safty purpose. door should be fixed with SS hinges and SS screw. door should be water proof, termite proof, fire retardant and having screw holding capacity complete all as manufacturer's specification & drawings & as directed by Engr -in -charge.

Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately) complete, all as specified and directed.

Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately) complete, all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), inimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid or/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.all as specified and directed.

Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately) complete, all as specified and directed.

S&F 12 mm thick Toughned glass as in hinged doors, partitions, automatic doors , plateform and similar work including cutting to shape, drilling holes, fixing clips,screw required. complete all as specified and as directed.

S&F in repair stainless steel pegs set of 6 pegs fixed in wall with Stainless screw etc. complete all as specified and directed.

S&F Butt Hinges medium weight SS 100mm long complete all as specified.

All as per Item No 116 here-in-before but 200mm long.

S&F Aluminum anodized sliding door bolts of 300mm long with hasp and staple(bolt type) and fixing clips of sheets ,cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

S&F in repair 250mm size mild steel door springs, all as specified and directed.

S&F in repair 1mm wall thickness stainless steel 202 Gde drapery rod with incl brackets, decorative finials at both ends complete. (Note : Sample/ design approved by Engineer-in-charge)

S&F in repairs MS galvanized wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, all as specified and directed.

Taking down easing and adjusting wooden shutters of any description n.exec 1 sqm each refixing in same opening, all as specified and as directed.

All as per items 122, here-in-before, but exc 1 sqm and n.exc 2 sqm each refixing in same opening.

Hacking out old broken glass (any thickness size quality or description) from wooden frames etc glazed with putty or fixed with beads, all as specified and as directed.

Hacking out old broken glass (any thickness size quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as directed.

S&F 12 mm thick Toughned glass as in hinged doors, partitions, automatic doors , plateform and similar work including cutting to shape, drilling holes required. complete all as specified and as directed.

S&F sheet glass 3mm thick ordinary quality and glazing with oil putty in square n. exec 0.5 Sqm in each pane complete all as directed.

S&F 3mm thick figured glass pin head type and glazing with oil putty in square exec 0.5 Sqm in each pane complete all as specified and as directed.

S&F in repair tinted glass 5 mm thick exc 0.5 Sqm in each pane complete all as specified.

M&L for PCC (1:3:6) type B1 (using 20mm graded agg) for hold fasts finished to match with the surrounding surfaces including necessary form work complete all as specified and as directed.

M&L for Mild steel small articles such as flat iron 25x3mm thick for hold fasts etc conforming to Fe 410-0, or 310-0, all as specified and as directed.

S&F in repair Aluminum anodized sliding door bolts of 250mm long with hasp and staple (bolt type) and fixing clips of sheets ,cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

M&L for cutting holes into or through cement concrete slabs etc, reinforcement or otherwise for inserting hold fast, superficial area exc 250 Sqcm, not exc 500 Sqcm and 15 cm depth all as directed.

S&F in repair door bottom seal with alluminium strip and rubber of size 900mmx40mm fixed with Stainless screw etc. complete all as specified and directed.

S&F in repairs aluminium anodized bow handle fabricated type, extruded section of 150mm long, complete all as directed.

S&F in repairs aluminium anodized barrel tower bolt of extruded section 200 mm long complete all as specified and directed.

Dismantling of wall and ceiling/cup boards (fibre, pulp, insulation, etc) or insulation boards/slabs, blankets, any thickness, including cover fillets, fixed in any position complete all as specified and directed.

S&F Solid PVC Wall Lining consisting of 5mm thick of wood grains PVC sheet inclusive of solvent cement and fixing to walls on PVC frame as per specifications including 35 mm pvc cover fillets and corner and drawing complete all as specified and directed.

Providing and laying joint less 3.4 mm thick epoxy flooring to adhieve perfect 0-0 level without any undulations on existing mosaic / kota stone flooring after surface preparation by grinding. Rubbing & cleaning the base floor followed by epoxy primer on prapared surface followed byb epoxy screed on primed surface followed by epoxy putty over screed and finally epoxy SL top, having materials of approved manufacture certified by Council of Scientific & Industrial Research (CFTR), self -smooth Gloosy finish , all as per manufactures specifications inclusive of necessary curing finishing and carrying all relted operations for proper completion of work complete in all respect all as approved colour. Note:1) Cost included in quoted rates for all taking down/re fixing including internal electrification as per site requirement. 2) all painting/distempering/preparation/ white wash etc works will be after proper covering of doors/windows/ventilators/ glassess/ all type bath fittings& electric fittings etc also cleaning of splashes will be done by contractor. 3) measurement wil be done after complete removal of debries. 4) Rate included for necessary scaffolding and arrangrments for working up to 20 mt height.

Note:- (1)-Cost included in quoted rates for all taking down/refixing including internal electrification as per site requirement. (2) all painting/distempering/ preparation/removal/white wash etc works will be after proper covering of doors/windows/ventilators/ glasses/all type bath fittings & electric fittings etc.also cleaning of splashes will be done by contractor . (3) measurement will be done after complete removal of debris. 4)Rate included for necessary scaffolding and arrangments for working upto 20m height)