Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹9.7 L
EMD Value
₹12,118
Closing Date
20 Nov 2025, 10:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Karnataka Power Transmission Corporation Limited
AEE-1
Providing additional 02 Nos of 11kV MEI Make PCVCB type feeder breaker for bifurcation of Overloaded feeders at 66/11 kV C.T.Kere Sub-station in A.N Hallli Nodal Center, KPTCL, Operations Division Tumakuru
KPTCL/2025-26/EL/WORK_INDENT2919
KPTCL/2025-26/EL/WORK_INDENT2919
Reserved
Electrical
Two Tender Document System(Two Cover)
KPTCL CEE Transmission Zone Office Tumkur
4 documents required · 3 mandatory · 1 optional
Certificate for having executed similar nature of works successfully/satisfactorily issued by an officer not below the rank of an Executive Engineer(Ele)., of an Electrical Utility be uploaded
The Tenderer should possess valid Super Grade Electrical Contractors License issued by the Government of Karnataka as on the date of Bid Submission and shall upload the same along with other bidding documents failing which the offer will be rejected
GST Registration Certificate
PAN Registration Certificate
ESI Registration Certificate
EPF Registration Certificate
Bidder shall be financially sound and shall submit Audited financial statements including Balance sheets, Profit and Loss statements, Turnover Certificate, Auditors Reports of the last five years preceding the date of bid submission of the Bidder.
Average Annual Turnover (AAT) of the bidder for best One Year out of preceding five financial years 2020-21, 2021-22, 2022-23, 2023-24 & 2024-25 ending on March or December as the case may be, shall not be less than Rs. 9.70Lakhs
Self-Declaration for not black listed by any Govt. organization/Board/Company/any other sector.
An undertaking to source the supply of equipment/material from KPTCL approved Vendors only as per the QR for Vendor registration, available in the KPTCL website i.e., https://kptcl.karnataka.gov.in, Link Tender & Procurement - application for Vendor registration etc
Self-declaration for Risk & Cost.
Self-declaration for Litigation or arbitration with respect to KPTCL contractors over the last two years.
Valid Certificate of the Registered Company/Firm issued by labour department (Form-C). Documentary proof in the form of certificate of registration issued by GOK is to be uploaded
Technical Schedule-I,II & III.
No deviation certificate
Proforma of under taking
Audited financial Turnover statement for preceding Five years
Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe /other reserved category as prescribed in the tender document
₹500
₹12,118
29 Oct 2025
29 Oct 2025
21 Nov 2025
10 Nov 2025
Providing additional 02 Nos of 11kV MEI Make PCVCB type feeder breaker for bifurcation of Overloaded feeders at 66/11 kV C.T.Kere Sub-station in A.N Hallli Nodal Center, KPTCL, Operations Division Tumakuru
Supply Portion:Station DP Structures & Accessories:Beam out of Channel 100 x 50 with arrangements for stringing power conductor on 11 kV side:1B2 4 metre Long (=0.038tonx12Nos=0.456 ton)
---- as per ...
RCC Pole-9 Mtr Long 145 Kg WL
---- as per terms
11 kV 400 Amps Double Break GOS
---- as per terms
11 kV 400 Amps Special Roaster GOS
---- as per terms
9 kV 5 kA Lightning Arrestor(Metal oxide Ceramic type)
---- as per terms
Rabbit ACSR Conductor for connecting Lightning Arrestors ---- as per terms
95 Sqmm Aluminium lugs for connecting LA ---- as per terms
DP Structure kit set as per IS- 1977- GI ---- as per terms
H-Frame for mounting GOS ---- as per terms
Caution/Danger Board for DP structure ---- as per terms
Earth Bond 450mm Long ( for GOS Handles ) ---- as per terms
Insulated GOS operating Rods ---- as per terms
RCC Pole clamp GI ---- as per terms
Copper Control Cables:19 core 2.5Sqmm(For Control, Annunciation and indication ckt) ---- as per terms
4 core 6 Sqmm( CT, PT, Metering & CT protection core) ---- as per terms
2 core 6 Sqmm( For DC and AC supply) ---- as per terms
ASCR Conductors for Main and Cross bus bar formation: Coyote ACSR Conductor ---- as per terms
Drake ACSR Conductor (For Main Bus) ---- as per terms
Hardwares: C- type Wedge connector for Drake to Drake ACSR Conductor. ---- as per terms
C- type Wedge connector for Drake to Coyote ACSR Conductor. ---- as per terms
C- type Wedge connector for Coyote to Coyote ACSR Conductor. ---- as per terms
Pad Clamp for Coyote ACSR ---- as per terms
Supply of galvanised Bolt and Nuts ---- as per terms
Single Tension Clamps with arcing horns for Drake ACSR. ---- as per terms
Single Tension Clamps with arcing horns for Drake ACSR. ---- as per terms
DISC Insulator 90 kN, Ball and Socket type porcelain ---- as per terms
SCADA Integration: 8 Channel 220/110 V Opto Coupler ---- as per terms
Multi Function Transducer (MFT) ---- as per terms
Copper Control/Communication Cable for SCADA: Signal cable Armoured Copper 10C x 0.5 Sq mm multistrand ---- as per terms
10C x 1.5 Sq mm multistrand, conforming to KPTCL specification ---- as per terms
Labour Portion: Erection of 11kV outdoor switchgear Erection, alignment and fixing to the foundation, outdoor switchgear unit including movement from the point of unloading to the point of erection. -...
Erection of 11kV Annunciator Panel ( 2F)
Erection of Annunciator panel, alignment and fixing properly to foundation base including movement from the point of unloading to the point of erection ---- as...
Earthing: Grounding of equipment by providing cast iron pipe of 100 mm ID 13 mm thickness, 2.75 metre long with 2 part clamp out of G.I. Flat 50 X 6 mm continuously welded alround the pipe using cast ...
Grounding of Equipment with 50X6mm GI flat and connecting to the equipement to the earthmat /ground pit. Each point of earthing with all formation works like bending, twisting, drilling of holes and c...
Supplying and providing 450 mm dia 450 mm height 1.5 to 2 thick hume pipe collar (non pressure type) for earth pits including all lead and lifts etc., ---- as per terms
11kV DP structuresLabour charges for RCC Pole - 9 Mtr Long, 145 Kg WL ---- as per terms
Erection, assembly and alignment of Station structure as per the directions of site Engineer ---- as per terms
Erection of H frame ---- as per terms
Erection of DP structure kit excluding cost of
erection of RCC poles. Including fixing of
braces insulators etc., as per the approved
drawings and specifications (excluding the
cost of excavation, bac...
Fixing of GOS including wiring ---- as per terms
Fixing of 6 Nos ( 2 Set ) Lightning Arrestor ---- as per terms
Earthing name plates and DP feeder name plate(s) including printing of letters, painting and board for new earthing pits (2feetX1feet) with stick. ---- as per terms
Painting feeder name on switchgear & annunciation desk and earth plates ---- as per terms
Fabrication works ( Welding, cutting, twisting, bending and fixing of light Fixtures, PVC Conduit laying & other etc.,) ---- as per terms
Shifting of Yard light Pole ---- as per terms
Bus-bar formation: Main bus/cross bus (all the three phases in a segment) using drake-single ACSR conductors , levelling of string conductors to the required height above the equipment, including prov...
Stringing of ACSR Conductor from Bus GOS to Outgoing GOS without allowing the conductor to touch the ground and without damaging the conductor ---- as per terms
11kV Control Cable Laying: Laying of control cables from equipments to control panels. ---- as per terms
Providing SCADA functionality to feeder(s)Laying Of DI/DO/Comm Cables and Terminating ---- as per terms
Fixing, configuration and commissioning of MFT ---- as per terms
Fixing, configuration and commissioning of Opto coupler ---- as per terms
Configuration of RTU and Engineering along with validation of data at SLDC ---- as per terms
Wiring of feeder panel11 kV Outdoor Switchgear ---- as per terms
11 kV Kiosk ---- as per terms
Transportation, Loading and unloading of material(s)Loading of CI Pipe, Control Cable (required materials availble) etc., at store ---- as per terms
Unloading of CI Pipe, Control Cable (required materials availble) etc., at site ---- as per terms
Transportation of material(s) from Antarasanahalli store to C.T Kere 30km ---- as per terms
Testing and Commissioning: Wiring Identification of wires, Ferruling Crimping and Termination of wires for annunciation etc. Testing of relays, CT's, PT's and breaker for operation for single11 kv pan...
CIVIL PORTION: Formation of Cable Duct & laying of slabs-Engineering and Construction of RCC (grade M - 20), type cable trenches, pipe trenches of required depths including cost of excavation, back fi...
Foundations: Design, Engineering, supply of all labour, material and construction of RCC (M20 Grade) footings and pedestals of any section/size including the cost of excavation in all types of soil/ro...
b) 11KV porcelain clad VCB switchgear out door type 350MVA. ---- as per terms
Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
b) PVC pipes 200mm dia., 6 kg/sqcm and class 3 ---- as per terms
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
2.Tender Doc - ITB, GCC, IFC Etc CT kere.doc
Tender Document • 0.16 MB
5.No deviation certificate.doc
Others - No deviation certificate • 0.03 MB
3.Techno commercial bid schedule (i-iii)-Doddaguni.xlsx
Techno-Commercial Worksheet • 0.02 MB
1.NIT-CT Kere.doc
Instructions to Tenderers • 0.12 MB
4.letter of under taking of firm.doc
Others - Letter of under taking of firm • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .