Provn of certain sanctioned work under AGE B/R-l Kapurthala under GE Kapurthala.

Amount

Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for glazed ceramic coloured tiles in vertical surfaces 450x300x7mm thick set and jointed in neat cement slurry pointed in white or colour cement to match the colour,with 15mm thick cement screed bed (1:4) complete all as specified and directed.

M&L for vitrified ceramic tiles light shade tiles 10 mm thick (square/rectangular) polished, area of each tile not exc 0.36 Sqm in floor set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles, with 15 mm thick cement screed bed in CM (1:6) complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11sqm but n.exc 0.18 Sqm in floor set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles, with 15 mm thick cement screed bed in CM (1:6) complete all as specified and directed.

M&L for machine cut kota stone for flooring and landing 18-20mm thick laid and jointed in grey cement slurry mixed with pigment to match the shade of slab including cutting and polishing bedded on 15mm thick bedding layer in CM 1:6 incl making hole for gas pipe as specified and directed.

M&L for machine cut kota stone as in risers, steps, skirting, dado, 20-25 thick laid and jointed in grey cement slurry mixed with pigment to match the shade of slab including cutting and polishing bedded on 15mm thick bedding layer in CM 1:6 incl making hole for gas pipe as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all specified and directed.

M&L for granite 20mm thick (of any type) work (table rubbed and polished)in steps, jambs, pillars, window cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) using marble dust with admix ture of pigment to match with shade of granite complete all as specified.

Demolition of brick / block masonry built in CM including all quoins, arches, pillars etc and clearing off the premises complete all as specified and as directed.

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 complete all as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Use and waste of formwork to chajjas and similar items including edges rough finished complete all as specified and directed.

M&L for TMT bars 10mm dia and over cut to length bent to shape required, including cranking, bending hooking etc & binding with mild steel binding steel wire (annealed) not less than 0.9mm dia all as specified and directed.

M&L RCC 1:2:4 type B-0 using 12.5 mm graded crushed stone aggregate as in chajjas etc complete all as specified and directed by Engineer-in-charge.

Taking down cement plaster on brick work or concrete surfaces incl racking out joints all as specified.

M&L rendering 15mm thick on brick wall or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified.

M&L for 15mm thick Rendering in CM 1:4 on brick work or concrete surfaces with water proofing compound finished even and smooth etc complete all as specified and directed. Note: WPC shall be paid separately.

M&L for 5mm thick rendering in CM 1:3 on brick work or concrete surfaces finished even and smooth without using extra cement in Ceiling etc complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying two coats of whitewash on ceiling over a coat of birla white putty complete all as specified and directed by Engr-in-Charge

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distermper over a coat birla white putty complete all as specified and directed by Engr-in-Charge

M & L applying two coats of exterior emulsion paint newly plastered or unplastered wall surface over a coat of cement primer including preparation of surfaces, complete all as specified and as directed.

M&L 75mm thick PCC 1:3:6 type C2 as in plinth protection finishing the surface even and smooth with out using extra cement complete all as specified and directed.

M&L for water proofing treatment to sunken floors of kitchen, toilets, laboratories,bath and WC's etc shall be as under:-

Application of Two component acrylic modified cementitious coating.

The surfaces to be applied shall be completely dry and free from containments such as dirt, dust, oil surface treatments and old coatings. Concrete substrates must be mechanically prepared using abrasive blast cleaning or milling to remove cement litance, existing coatings and achieve a gripping profile that is clean, dry and free from litanceand any other form of surface contamination. the installation instructions in manufacturer's published literature should be strictly compiled with, including but not limited to the following:-

Chipping out any visible cracks in ' V- Groove' pattern as applicable. Special attention on this part cleaning of cracks and then filling those cracks with SIKA latex SBR 100 putyy/ Dr Fixit 302 SBR latex/ perma latex SBR / FOSROC Nitibond SBR latex/ Asian Paints latex as required. Final cleaning of surface with power grinder, wire brush, hair brush and vaccum pressure if required.

Dampen all surfaces immediately ahead of application of Acrylic modified cemetitious coating of Sika Top seal - 107/brush Bond FOSROC/ Dr Fixit/ STP/ CICO.

While the surface is still damp from saturation (SSD), apply one coat of acrylic modified cementitious coating of Sika Top seal- 107/ Brush bond FOSROC/ Dr fixit / STP/ CICO of viscosity as per manufacturer's instructions.

Apply glass fabric sheet of Sika Fab 1 / FOSROC/ Dr Fixit/ STP while the first coat is wet.

Once touch dry apply second coat of Acrylic modified cementitious coating of Sika Top Seal- 107/ Brush bond FOSROC/ Dr FiXit/ STP/ CICO of viscosity as per manufacturer's instructions on the entire area.

Second coat shall be applied after 6-8 hrs of application of previous coat and in the direction right angle to the previous coat.

The waterproofing coating should be taken to a height minimu 300mm above the finished floor level on the vertical surface.

It is essential to cure acrylic modified cementitious coating immediately after application ( minimum 6-8 hrs drying) for a minimum of 3 to 54 days to ensure full cement hydration and to minimize cracking.

A protection plaster ( 12-15 mm thick) in cement mortar 1:3 admixed with appropriate integral water proofing compound has to be applied on the walls.

Admixture : - Sika Plastocrete plus/ FPSROC/ Dr Fixit / STP/ CICO confirming to IS 2645.

Providing and applying a protection screed of 50 mm thick 1:4 cement sand mortar admixed with Sika plastocrtete over the applied water proofing coating on horizontal surfaces.

Admixutre : Sika Plastocrete Plus/ FOSROC/ Dr Fixit/ STP/ CICO confirming to IS 2645

All the corners and joints should be pretreated with elastic waterproofing sealing tape with a woven bonding mesh on each surface and an elastic expansions zone in the centre of make Sika Seal Tape S/FOSROC/Dr Fixit/STP.

The membrane has to be protected in accordance with the manufacturer's recommendations until placement of concrete. The membrane to be inspected for damage just prior to concrete placement and make repairs in accordance with manufacturer's recommendations.

waterproofing treatment has to be carried out through applicators authorised.

All the joints of pipesand traps within sunken portion shall be selaed properly by Epoxy sealant.

All CI traps in sunken slabs to be enclosed with PCC 1:1.5:3 (min 15cm) all - round.

The sunken portion shall be filled with PCC 1:5:10 type E-2 (using 40 mm stone aggregate) complete all as specified.

Providing drainage spout pipe GI 40mm dia bore light grade upto outside of outer wall ( Approx 450mm to 600 mm long) including cutting to existing wall and making good the disturbed surface complete all as specified and directed.

Providing 40 mm thick cement concrete 1:2:4 type B-0 using 12.5 mm grade stone aggregate as in flooring for laying floor finish all as specified. Note :- Item No 24.20, 24.21 & 24.22 shall be measured and paid seprately.

M&L for providing GI pipe heavy class of dia 40mm all as specified and directed by Eng-In-Charge

M&L PCC (1:5:10) type E2 using 40mm graded aggregate thick as in foundation/sub base complete all as specified and directed by Engineer-in-charge.

M&L PCC type B-0 (1:2:4) (12.5mm stone graded aggregate), 40 mm thick as for receiving top finishing layer of ceramic tiles finished even and smooth etc complete all as specified and directed.

Taking down chowkats or framed with shutter (with out taking off shutters from the frame) area not exc 1.50 sqm each complete all as specified and directed.

Taking down chowkats or framed with shutter (with out taking off shutters from the frame) area exc 1.50 sqm but n. exc. 4sqm each complete all as specified and directed.

S&F solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles end plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded seat to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement and fixed in the frame at site as per specification and drawing all as specified in SSR part complete all as specified.

S&F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, size of frame 125 x 60mm completeincluding filling of chowhats qith PCC (1:2:4) type B-0 using 12.5mm graded aggregate all as specified and directed by Engr-in-Charge

S&F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, size of frame 105 x 60mm inl PCC (1:3:6) filling in frame complete all as specified and directed by Eng-In-Charge

S&F factory made 2nd class, hard wood, 35mm thick glazed and skeleton shutters, open rebated and prepared to received glass, gauge, etc ( without sash bars) edges of framing plain, chambered or rounded, fitted with cut and mitred beads for securing glass , etc but divided into squares with plain chamfered or rounded mirted and rebated sash bars any numbers sizes of members of shutters as specified and directed by Engineer-in -Charge

Supply & fixing 35mm thick 2nd class hardwood (factory made) plain framed panelled shutters (two panels) with lock rail and panels of 12 mm thick veneered particle board with comercial veneering on both sides of 9mm thick ply (BWP grade) fixed to chowkhat/ frame complete. The size of rails and styles of 2nd class hardwood as per IS 1003 (Part I) Killn seasoned & chemically pressure treated complete all as specified and directed by Eng-In-Charge

S&F PVC cupboard of size 75mm x 40mm with wall thickness of 5mm made out of extruded 5mm thick Plain/Printed/Prelam PVC sheet reinforced with 15mm x 15mm M.S. square tubes of 19 gauge thickness throughout the frame and mitre cut at two corners and jointed with 2 nos. of 150mm long brackets of 10mm x 10mm M S square tubes. The door frame shall be fixed to the wall using 65/100mm long MS screws through the frame by using PVC fasteners complete all as specified and directed

S&F factory made PVC cupboard shutter flush type of 25mm thickness consisting of panel of hollow PVC profile of 12mm x12mm inserted all around the hollow profile section and insert one 10mm x 10mm MS tube in the centre of this section and lipped with 10mm thick(5mm x 2) and 12mm wide on stiles and rails using solvent cement the inner panel shall be laminated with 5 mm thick termite proof waterprrof and fire retardent printed PVC sheet using solvent cement on both sides of panel complete all as specified and directed.

M & L for Veneered decorative plywood, grade 1, 12mm thick , 7 nos ply (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber, metal frame work complete all as specified and directed by Eng-in-Charge Note: Timber frame work for fixing of plywood is included in item

S&F Stainless steel round closet rod of 40mm dia, 2mm thick wardrobe hanger rod, rod for hanging clothes in wardrobe with end supports including all screwing fittings complete all as specified and directed by Engineer-in-charge.

S&F alumunium hinges for PVC door shutter, size of hinges in 100mm complete all as specified and directed by Eng-In-Charge

S&F Aluminium anodised, barrel tower bolts of extruded section and fixed, length of bolt in 200mm complete all as specified and directed by Eng-In-Charge

S&F extruded aluminium alloys handles frabicated type anodized of size 150mm long complete all as specified and directed by Eng-In-Charge

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolt in 250mm complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10cm girth or width not otherwise described and applying two coat of synthetic enamel paint over red oxide primer all as specified and directed by Engineer-in-Charge.

S & F steel window 1.25mm thick Box type ( primer coated) ERW hollow P section of size 60mm x 25mm single rebated comprises glazed Skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of T- Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC ( 1:3:6) type C-1 Four Nos for each window) including following fitting welded to frame shutter: (a) Handles of Z Sec 20mm x 100mm long (b) stopper – 01 No per leaf (c) Cleat 55mm long of hollow square 15mm x 20mmx63mm welded to hinges – 01 No per leaf (d) Mild steel Pintal hinges of size 75mmx75mmx12mm-02 Nos per leaf (e) Grills made out of MS square bar 12mm dia welded to FI frame complete all as specified and shown on drawings. Note: Glass and painting shall be measured and paid separately under appropriate item (ii) Irrespective of whatever shown on drgs, MS gills shall be of 12mm dia MS square bar and paid separately. complete all as specified and directed.

S&F steel window 1.25mm thick Box type ( primer coated) ERW hollow P section of size 60mm x 25mm single rebated comprises gauged Skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of T- Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC ( 1:3:6) type C-1 Four Nos for each window) including following fitting welded to frame shutter: (a) Mild Steel Hold Fast,150mm long of 12mm Square bar made to shape – 04 Nos per window (b) Handles of Z Sec 20mm x 100mm long (c) stopper – 01 No per leaf (d) Cleat 55mm long of hollow square 15mm x 20mmx63mm welded to hinges – 01 No per leaf (e) Mild steel Pintal hinges of size 75mmx75mmx12mm-02 Nos per leaf (f) Grills made out of MS square bar 12mm dia welded to FI frame complete all as specified and shown on drawings. Note: Wire mesh and painting shall be measured and paid separately under appropriate item etc complete all as specified and directed.

Supply and fix steel ventilators fixed type with glazing bars etc complete all as specified and directed by Engr-in-Charge.

S&F 3.00 mm thick Plain sheet glass, one side sheet glass is groundor obscured or frosted in squares exc 0.5 sqm each pane and glazing with metal beads including Solar control film 25 micron reflective type sticked to glass panes all as specified all as specified and directed by Eng-in-Charge

S&F 3.00mm thick figured glass, pinhead type in squares n exc 0.5 sqm each pane and glazing with oil putty all as specified.

S&F galvanized mild steel wire cloth 0.56mm nominal dia of wire and avarage width of aperture 1.00mm and fixed with tinned tacks/screws with bolts incl leaping wooden complete all as specified and directed.

M&L for framed work such as grills gratings etc with ends of bars shouldered and or riveted or forged into spikes framed guard bars barred iron doors ladders framed balusters walk ways railings framed work of water tanks and similar work complete all as specified and directed.

S&F in repair for 300mm MS ordinary rat rail rod pattern helical springs including roller and roller plate complete all as speicified complete all as specified and directed.

Taking down GI tubing & connection 15mm dia laid in floor / trenches or fixed to walls complete all as directed by Engineer-in-Charge.

S&F GI tubing 15mm dia medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors.

Taking down GI tubing & connection 20mm dia laid in floor / trenches or fixed to walls complete all as directed by Engineer-in-Charge.

S&F GI tubing 20mm dia medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors

S&F in repairs 15 mm bore CP bib taps fancy type cast copper alloy with crutch or butter fly handle screwed down for iron pipe or for brass ferrule and fixed complete.

S&F in repairs 15mm dia stop/angle valve, CP cast copper alloy with crutch or butterfly handle. Screwed down high pressure, screwed both ends for iron pipe and fixed complete all as directed

Supply and fix in repairs vitreous china squatting pan Orissa pattern wash down water closet of size 580x440 mm, white, with integral foot rests complete fixed in repairs with P or S trap, PVC flushing cistern low level of Make 10 ltrs capacity including brackets for flush tank, PVC flush pipe and all necessary fittings etc complete complete all as specified and directed.

S&F 20mm dia aluminium chromium plated tubular towel rails, D type, 60cm long between flanges, complete all as specified.

S&F in repairs PVC(SWR) floor trap with grating and diameter of outlet 75mm including jointing to waste pipe fixed with solvent cement complete all as specified and directed.

S&F in repairs fancy type chromium plated stop valves with long shank and cup (concealed type) cast copper alloy screweddown high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed for bore fof size 15mm complete all as specified and directed.

Supply and fix for vitreous china ware wash basin white, flat back size 550 X 400mm,including 15mm dia pillar tap chromium plated, CP waste coupling, waste fittings, union and waste pipe 32mm dia or required length and all necessary inlet, out let connections complete all as specified.

S&F in repairs shower rose 100mm with cp arm of chromium plated any colour or fixing with 15mm pipe (minimum weight 40gm) complete all as specified and directed.

S&F corner glass shelf of size 300mm dia 8mm thick with chromium plated bracket complete all as specified by Engineer in Charge

S&F in repairs PVC cabinet size 450mmx325mmx120mm with looking mirror complete all as specified and directed by Eng-In-Charge.

S&F in repair for kitchen sink with drain board made of stainless steel 1mm thick sheet with plugs, washers and wastes including bedding in cement mortar including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm and bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repair for utensil rack stainless steel of size 750x600x250mm fixed on walls with screws as specified and directed.

S&F soap dish chromium plated heavy duty complete all as specified and directed.

S&F in repair 25mm MS curtain rail powder coated with fixing brackets, stops, roller etc as specified and directed.

Cutting chases pinning in brick/stone/blocks masonary in making good to facings where required and pointing in CM (1:3) to ends or eges of steps, cills, sun shades, shelves, lintel etc and cutting chases for concealed water tubing or etc and making good complete all as specified and directed.

Taking down eaves gutters and rainwater pipes including all fittings as specified and directed.

Dismantling of cast iron pipe of any description complete all as specified and directed by Eng-In-Charge

S&F 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as directed by Engineer-in-Charge.

S&F 75 mm PVC (SWR) pipes single socketed in any length laid in floor complete all as directed by Engineer-in-Charge.

S&F 75 mm PVC (SWR) bend with acess doors complete all as directed by Engineer-in-Charge.

S&F 75 PVC (SWR) junction single, (single T) with acess doors equal or unequal complete all as directed by Engineer-in-Charge.

S&F 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as directed by Engineer-in-Charge.

S&F 110 mm PVC (SWR) bend with complete all as directed by Engineer-in-Charge.

S&F 110 PVC (SWR) junction single,(single T) equal or unequal complete all as directed by Engineer-in-Charge.

S&F 110mm PVC(SWR) vent cowl complete all as directed by Engineer-in-Charge.

S&F in repair rotational moulded polyethylene water storage tank three layered (Cylindrical vertical with closed top), ISI marked, white coloured, hoisted & fixed in position, capacity 500 litres, including dismantling of unserviceable tank and removing from site complete all as specified and directed.

S&F in repair 20mm gunmetal globe and gate valve with iron welded hand secrewed both and for iron pipe complete all as specified and directed.

S&F in repair 15mm gunmetal globe and gate valve with iron welded hand secrewed both and for iron pipe complete all as specified and directed.

S& F in repairs Ball valves 20mm high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm-210 gms./25mm-455gms/ 40mm - 690 gms) complete all as specified and directed.

Dismantling of brick tiles or terracing tiles laid bedded and pointed in cement mortar in single layer on roofs as directed by Engr-in-Charge

Demolition of mud in roof any thickness including plastering & leeping removed as directed by Engr-in-Charge

M&L for rendering 10mm thick cement mortar 1:3 on concrete surface even and smooth with waterproofing compound as directed by Engr-in-Charge

Supply only integral water proofing compound complete all as specified and as directed.

M&L for preparation of newly plastered surface making surface completely dry and applying a coat of bitumen primer @ 0.40 ltr/sqm and after drying of primer apply APP modified water proofing membrane with non woven polyster reinforcement 3mm thick superior multipolymericweighing not less than 3kg/sqm with properties of high penetration and centre core consisting of 90 micron high molecular high density polyethylene (MHHDPE) film consisting of five layers with a coat of hot blown bitumen 85/25 @ 1.20 kg/sqm under and over the APP membrane laid with torching application to the surface complete and sealing the side as well as end laps (overlaps should not be less than 10 cm) complete all as specified and directed.

M&L for 40mm thick brick tiles laid on 15mm screed bed in cement mortar 1:3 with jointing and pointing in cement mortar (1:3) mixed with 5% crude oil by weight of cement all as directed.

Material and labour for 40 mm thick Cement concrete type B1, 1:2:4 (using 20 mm graded stone aggregate) as in PCC padding over roof slab complete all complete all as specified and as directed by the Engineer-in-Charge.

All as per item No 91 above but except brick tiles complete all as specified and directed by Engineer-in-charge.

M&L cement concrete Type B0 1:2:4 (12.5mm graded aggregate) in roof kerbs, rounded or chamfered edges complete all as specified and directed by Engineer-in-charge.

Surface dressing not exceeding 15cm deep including cleaning away all grass vegetation, sapling, shrubs, brushwood, undergrowth, roots and removing rubbish upto a distance of 50 Metres outside the periphery of the area complete all as specified and directed by Engineer - in - Charge.

Excavating in trenches not exc 1.5m wide and not exceeding 1.5m in depth for foundation/poles/stays/laying of cables not exc 10 sqm on plan and not exc 1.5m in depth and getting out soft/loose soil complete all as specified.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm complete all as specified.

Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

M&L RCC (design mix) M-25 (20mm graded agg) as in columns, pillars, piers, posts and struts complete all as specified and as directed.

M & L RCC (design mix) M-25 ( 20mm graded agg) as in foundation, including rafts,plinth beams, footings for columns etc complete all as specified and as directed.

M&L for Reinforced cement concrete (design Mix) M-25 (20mm graded aggregate) as in Lintels & roof beam etc complete all as specified and as directed.

M&L for Reinforced cement concrete (design Mix) M-25 (20mm graded aggregate) as in slabs complete all as specified and as directed.

M&L for formwork to sides of concrete foundations, footings, bases of columns, plinth beam and similar work complete all as directed.

M&L for formwork to sides of pillars, posts,columns etc in square, rectangular and similar work complete all as directed..

M&L for formwork to sides or soffits of floor or roof beams, lintels, cantilevers, shelves including sup-ports, overhangs and similar work complete all as specified and as directed.

M&L for form work to soffits of suspended slabs flat surface of concrete finished rough surfaces of concrete not exceeding 200mm thick, complete all as specified and directed.

Supply and fix TMT bars 5mm and over upto and including 10mm dia in stirrups, spacers and binders bent to shape required,including binding with mild steel wire (annealed) not less than 0.9mm dia completed all as specified and as directed by the Engineer-in-Charge.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M & L rendering 15mm thick plarster on fair faces or other than fair faces of brick work in CM 1:4 finished even & smooth without using extra cement all as specified and directed by Engineer - in - Charge .

M & L applying two coats of cement base paint on newly plastered or unplastered wall surface over a coat of cement primer including preparation of surfaces, complete all as specified and as directed.

S&F anodised aluminium frame powder coated for doors & windows with one or more rebates including joining cleat for fixing etc complete all as specified and directed by Engr-in-Charge

Supply and fix anodised aluminium windows and ventilators powder coated with frames & shutters with one or more rebates including joining cleats, glazing clips, rubber padding, anodised aluminium snap beading screws etc and necessary aluminium iron mongary for fixing etc complete all as specified and directed by EIC.

Supply & fix Powder coated Anodised aluminium door shutters, aluminium section including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified.

S&F 4.00mm thick plain glass, pinhead type in squares n exc 0.5 sqm each pane and glazing with oil putty complete all as specified.

S&F framed work Fe 410-W(Gde-E-250)Quality-A as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete drilled for fixing of steel sheeting or other covering.Doors etc. to be prepared for hanging or sliding with and incl hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

M&L Vitrified Ceramic tiles 8-9 mm thick (square/ rectangular) polished, area of each tile not exceeding 0.42sqm but not exceeding 1.00 Sqm, in floors/skirting etc set & jointed in neat cement slurry & pointed in white or coloured cement to match. incl 15mm thick screed bed/bedding layers in cm 1:4 complete all as specified and directed by Engr-in-Charge

M&L for preparation of new wooden surface exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

S&F in repair repairs cast iron body door closer hydraulically regulated, designation No 3 universal type suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg complete all as specified and directed by Eng-In-Charge.

Excavating over areas, not exc 1.5m deep in soft/ loose soil and getting out as directed by Eng in Charge

M&L for removing excavated material exceeding 250m but not exceeding 500m and depositing where directed all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block of approved shape and size confirming to IS 15658-2006 of 60mm thickness M-35 grade with grey cement and pigment complete all as specified and as directed.

M&L for Hardcore of broken stone or boulders of gauge not exceedingf 63mm, deposited spread and levelled in layers not exceeding 15cm thick watered and rammed to a true surface complete all as specified and as directed.

M&L for 25mm thick sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

M&L for cement concrete Type D2 1:4:8 (40 mm graded aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.

M&L for providing precast cement concrete block masonry (type B1) 1:2:4 20mm graded stone aggregate) with solid blocks, exe 10cm in width and setting in cement mortar complete all as specified and directed.

Taking down aluminium point wiring for light, fan, bell socket, power socket etc complete including fittings and fixtures removing from site and making good disturbed surfaces of walls, floors, etc complete all as directed by Engineer-in-Charge

Material and labour for point wiring complete with two 1.5 Sqmm single core multistranded copper conductor PVC (FRLS) insulated cable in PVC concealed conduit of size 19/20 mm (ISI Marked) including PVC accessories (concealed in wall and surface in ceiling complete including cutting chasing & making good to disturbed surface etc including pressed steel terminal boxes (sunk in wall) with 3 mm thick plastic laminated sheet top cover with 1.5 Sqmm insulated un-sheathed PVC insulated single core multistranded copper conductor common earth and connecting to earth dolly with suitable size of copper end connector for the following :- Note :- Colour code shall be maintained as per IE rule.

One light point controlled by one, one way switch

One fan point controlled by one, one way switch

One socket outlet 3 Pin, 5 Amp on independent board

One socket outlet 3 Pin, 5 Amp on same board.

One bell point controlled by one bell push

One light point controlled by one, two way switch

M&L for point wiring with 4.00 Sq mm single core multi-stranded copper conductor PVC (FRLS) insulated, unsheathed cable 1100 volt grade in PVC concealed conduit of size 19/20 mm (ISI Marked) including PVC accessories (concealed in wall and surface in ceiling complete including cutting chasing & making good to disturbed surface etc including pressed steel terminal boxes (sunk in wall) with 3 mm thick plastic laminated sheet top cover with 4.0 Sq mm single core, multi-stranded copper conductor, PVC insulated, unsheathed cable for common earth and connecting for earth dolly for 5 pin, 15 Amp socket outlet on Independent board.

S&F switch piano flush type single pole one way 5 Amp (ISI Marked) complete all as specified and as directed.

S&F switch piano flush type single pole one way 15 Amp (ISI Marked) complete all as specified and as directed.

S&F socket out let 2 in 1, 3 pin 5 Amp flush type (ISI Marked) complete all as specified and as directed.

S&F socket out let 2 in 1, 3 pin 15 Amp flush type (ISI Marked ) complete all as specified and as directed.

S&F switch piano flush type single pole two way 5 Amp complete all as specified and as directed.

S&F Bell push flush type single pole one way 5 Amp complete all as specified and as directed.

M&L for ceiling rose, surface Bakelite 65 x 17.50 mm of three terminals PVC/Polycarbonate,isolated body (ISI Marked) complete all as specified and as directed.

Taking down old unserviceable flourescent tube light fitting 36/40 watt fluorescent tube light fittings direct to walls or roof as ordered and disconnecting electrically with the electrical system and all materials required for the same. The rates also include making good the same to match with the existing surface.

Supply and fixing LED lights fitting 1x 20W, 220V, 100 lumens per watt, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. Make: Crompton/ Bajaj/ Philips or equivalent as mentioned in Appx of list of makes.

Taking down old unserviceable lamp holder and S&F lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings including LED lamp 09 Watt complete all as specified and as directed.

Taking down old unserviceable bulkhead fitting & supply & fix LED light fitting 1x9 watt/1x10 watt bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fix LED Bldg security light fitting 35 W housing made out of die cast aluminum alloy with toughed glass, IP 65/66 protection having clamp for mounting on wall working on 240 V AC 50 Hz, 20 watts including fixed on wall with 02 Nos MS clamps and bracket made of 40 mm dia light grade GI pipe bend to shape complete all as specified and as directed.

Supply and fixing ceiling fans complete with blades, down rods, canopy, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CMM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) and connecting up and including provision of twisted three core PVC insulated flexible cord of 0.75 Sqmm copper conductor of required length from ceiling rose/connector to fan complete all as specified and directed. Note :- (i) Rate for taking down of old ceiling fan deemed to be included in the quoted rate. (ii) Old ceiling fans shall be deposited to E/M store yard at quoted rate.

S&F in replacement Exhaust fans copper wound of 230 Volt 300 mm sweep ventilator DB bouble ball bearing heavy duty motor, metal blade with protection steel bird guard and roubst complete including M&L for providing/cutting the round hole of required size in wall finishing the same supply and grounting the ragged bolts in wall, fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated three core 23/.0076 copper cable rubber insulated from ceiling rose to exhaust fan motor and writing MES No. with black synthetic enamel paint 2.0 cm high complete all as specirfied and directed.

Taking down old unsv DB and supply and fixing factory made sheet metal enclosure double door distribution board class IP-43 with 200 Amp rated copper bus bar 240 volts 8 way single pole and neutral link complete all as directed by Engineer-in-Charge.

Taking down unserviceable MCB’s and supply & fix following type/rating MCB’s including necessary connection as under:-

(a) S & F of MCB, 10 to 32 Amp, SP, 240 Volt

(b) S&F of MCB, 25 to 32 to Amp, SPN, 240 Volt

Supplying, laying, jointing and testing under ground XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 vols grade cross sectional area 50 Sqmm 3.5 core laid in trences, in floor, in duct, through pipes or along the pole including taking down old one complete all as specified and directed by Engr-in-Charge.

Material and labour for sand cushioning to under ground cable with a layer of sand 8 cm thick before laying of cable and 15 cm thick after laying of cable complete all as specified and directed. Note : For payment purposes 18cm thickness shall be considered.

Material and labour for brick protection using old size sub class ‘B’ bricks, laid flat, dry adjacent to each other laid length wise perpendicular to the axis of cable complete all as specified and directed.

Taking down old unserviceable sub main wiring of any sizes and M&L for sub main wiring with two runs of single core PVC insulated, unsheathed copper condutor, multi stranded cable of size 6.00 Sqmm 1100 volts grade drawn PVC concealed conduit of size 19/20 mm (ISI marked) including PVC accessories complete incl cutting and chasing and making good etc including one run of 6.00 Sqmm single core copper conductor multi-stranded PVC insulated, unsheathed cable as earth wire continuity conductor complete all as specified and directed by Engr-in-Charge. Note : 3 run of 6.00 Sqmm cable and one run of PVC Conduit shall be measured & paid as one unit.

Supply and fix electric water heater stoarage type ABS body with metalic inner tank & heating element upto 2KW capacity 25Ltr, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, steel braided 45 CM long connection piece, nut, bolts and washers to fixing on wall complete all as specified.

S&F Sheet metal enclosure, SPN with two pin and earth plug and socket with MCB 20A, suitable for protection of appliances like AC/Geyser suitable for flush mounting and surface mounting complete all as specified. Make Legrand/Havells/L&T/Indoasian.

M&L for Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick surrounded with charcoal and salt, buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical Plate No 3 of MES SSR Part-I connected to main switch board or main control board all as specified and testing on completion including provision of earth wire protected by galvanized iron 15 mm dia light grade pipe and watering pipe shall be 20 mm bore light grade including all excavation and earth work in any type of soil, PCC pit with pre-cast RCC cover, charcoal/salt, funnel etc complete all as directed.

Supply, install, testing and commissioning of LT panel size 800 mm x 600 mm x 150 mm enclosures cubical weather and vermin proof totally enclosed made out of 1.6 mm thick CRCA sheet machine pressed of suitable size to operate on 3 phase 4 wire system 415 Volts, 50HZ double door with front openable and PVC acrulic glass cover suitable size for checking of meter reading without opening door with locking arrangement incl inner shutters for mounting switch gear etc, suitable arrangement for fixing of electrical meter and SPN 40 to 63 Amp including pre wiring from Bus bar to Meter and Meter to MCB SPN (for pre wiring use 6.00 Sqmm Single core copper cable and suitable size of lugs for connecting from Busbar to meter and meter to MCB SPN)including bottom gland plate with sufficient numbers of circular cable entry holes, including prewired complete as per drawing with masonary work for fixing in wall duly powder coated with comprising of the following :-

INCOMING :- (i) MCCB 100 Amps FP, 415 Volt 25 KA adjustable thermal & fixed magnetic setting Ics = 100% = 01 No . (ii) Phase indicating lamp LED type with HRC fuse – 1 Set of three. (iii) ON/OFF indicating lamp on incomer feeder for status of feeder = 02 Nos (iv) Aluminium bus bar 200 Amps capacity with bus bar supports, DMC/SMC insulators of CPRI approved of suitable length insulated heavy heat shrinkable sleeves etc -04 Nos.

OUT GOING :- (i) MCB 63 Amp,415 Volt,10 KA, Single pole and neutral -04 No. (ii) Refixing of old existing single phase electronic energy meter including connection from SPN to meter with 6 Sqmm copper stranded conductor including earth wire complete all as specified and directed by Engr-in-Charge. Make - HPL or equivalent in Neptune - 04 Nos

S&F ding dong bell AC 230V single pole complete all as specified and directed. Make - Anchor/Legrand/Havells or equivalent as mentioned in Appx of list of makes.

S&F LED decorative wall light 20W luminaires including LED light driver holder and warm white bulb of suitable size 2 nos connecting up with three core flexible copper conductor cable of suitable size complete. Note :- (i) Rate for taking down of old LED fittings deemed to be included in the quoted rate. Make : Philips : Trendo Wall light or equivalent in crompton/philips/wipro

Supply & fix LED light fitting 7W/9W picture wall light including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-Charge. Make- Philips Muzris picture light 07W or equivalent in Philips/Crompton/Wipro Note :- (i) Rate for taking down of old light fittings deemed to be included in the quoted rate

Supply and fixing in replacement round shape 15 watt 220 volts AC recessed/ceiling mounted type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete. Note :- (i) Rate for taking down of old light fittings deemed to be included in the quoted rate

Supply and fixing factory made sheet metal enclosure double door distribution board class IP-43 with 200 Amp rated copper bus bar 415 volts 4 way Triple pole and neutral link complete all as specified and as directed.

S&F of MCB, TPN/FP 40 to 100 AMP complete all as specified and as directed.

COSMO BUILDERS (BID ID -3335370)

Motorway Constructions (BID ID -3336438)