EXTENSIVE REPAIR/MAINTANCE OF TOILET BLOCK OF MO CDA GHY AND REPLACEMENT OF INTERNAL WIRING, FIITINGS, FIXTURES AND WATER SUPPLY PIPE LINE IN CERTAIN TOILETS AT CDA GUWAHATI UNDER GE GUWAHATI

Amount

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing and removing debrires from the site complete all as specified and as directed.

Taking down chowkats with shutter (without taking off shutter from the frame) not exc 1.5 Sqm each complete all as directed.

Taking down chowkat with shutter without taking off shutter from the frame exc 1.5 Sqm n.exc 4 Sqm each complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.complete all as directed.

Demoliation Cement concrete (unreinforced) Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as directed.

Taking down 20mm bore steel tubing and connections, complete all as specified and directed

Taking down 25mm bore steel tubing and connections, complete all as specified and directed

M&L 25mm thick PCC (1:2:4) type B-0 (using 12.2mm graded aggtregate) as in levelling course in flooring finishing cement concrete surface even & fair complete all as specified and as directed.

M&L Non skid coloured tiles 7 to 8 mm thick (square/rectangular) polished, area of each tiles exc. 0.18 sqm but not exc 0.38 sqm in floors etc set and jointed :in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and as directed.

M&L Coloured glazed ceramic tiles 350x250x7mm/300 x 450 x 7 mm thick in vertical surfaces and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick backing with CM (1:4) complete all as specified and as directed.

S&F Factory made single extruded WPC (wood polymer composite) solid door/window/ ceosetory windows & other frame/ chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (suspension grade) calcium carbonate and natural fibers (wood powder / rice husk/ wheat husk) and non toxis additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screw withdrawal strength of 2200 N (face) & 1100 N (Edge), mimimum compressessive strength of 58 N/sqmm, modulus of elasticity 900 N/sqmm and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with MS holdfast/ lugs/SS dash fasteners of required dia and length complete as per mauufactueres instruction and as directed Note: MS holdfast /lugs or SS dash fasteners shall be paid for separatel).

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face, with particle board core, complete as per specification & drawing as specified in SSR Part I, Section 8 and as directed.

S&F 100 mm size Butt hinges, medium weight, cold rolled mild steel and fixed complete all as specified and as directed.

S&F 100mm long Aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and as directed.

S&F 150mm Aluminium handles, cast type, anodised complete all as specified and as directed.

S&F Powder coated (minimum thickness of powder coating 50 micron) Anodised aluminium frame for doors, windows, ventilators, partitions with one or more rebates including joining cleat for fixing etc. complete all as specified and directed Note:- Design/pattern, profile sizes and other dimensions shall be of standard sizes and as directed

S&F Powder coated (minimum thickness of powder coating 50 micron) anodised aluminium doors shutters including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, along with standard locking arrangements, handles, tower bolts etc as required. complete all as specified and directed Note:-(i) Labour charges for fixing of glass/wire guage is inclusive in the unit rate quoted. Glass/Wire Guage shall be measured and paid seperately at supply only rates (ii) Design/pattern, profile sizes and other dimensions shall be of standard sizes and as directed

S&F Powder coated (minimum thickness of powder coating 50 micron) anodised aluminium windows/ventilators/partitions any type including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, along with standard locking arrangements, handles, tower bolts etc as required. complete all as specified and directed Note:- (i) Labour charges for fixing of glass/wire guage/aluminum grills is inclusive in the unit rate quoted. Glass/Wire Guage/aluminum grills shall be measured and paid seperately at supply only rates (ii) Design/pattern, profile sizes and other dimensions shall be of standard sizes and as directed

Supply only Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminum window/ventilator shutters complete all as specified and as directed.

Supply only 4mm thick plain sheet glass, ordinary quality fixed with Aluminum frame work n. exc 0.5 sqm in each pane complete all as specified and as directed.

Supply only 5mm thick plain sheet glass, ordinary quality fixed with Aluminum frame work exc 0.5 sqm in each pane complete all as specified and as directed.

Supply only 12mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed to Aluminum frame work complete all as specified and as directed.

S&F aluminum (extruded body section) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed, complete all as specified and as directed.

M&L for 15mm thick rendering with cement mortar (1:4) on fair faces of brick work in two layers (10mm & 5mm)seperately mixed with water proofing compound in top layer as per manufacturer's instructions and finishing the surface even and fair without using extra cement complete all as specified and as directed. Note:- WPC shall be measured and paid seperately under appropiate item.

Supply only liquid water proofing compound complete all as specified and as directed.

M&L Rendering 10 mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:6 for finished even and fair complete all as specified and as directed.

M&L for Rendering 5 mm thick on concrete surfaces as in ceiling in cement mortar 1:3 for finished even and fair complete all as specified and as directed.

M&L prepration of new plastered surfaces of wall applying two coat of oil emulsion distemper over wall care putty to obtained smoothness of plastered surfaces(minimum thickness 1mm) including one priming coat complete all as specified and as directed.

M&L prepration of new plastered surfaces of ceiling applying three coat of white wash complete all as specified and directed.

M&L prepration of new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M&L treating sunken floor surfaces with 2 coats of acrylic polymer modified protective and water proofing coating complete all as per manufacturer's instruction as specified and as directed.

M&L PCC (1:5:10) type E-2 (using 40 mm graded stone aggregate) as in sunken portion complete all as specified and as directed.

M&L 25mm thick PCC (1:2:4) type B2 as in sub base of floor/leveling course using 20mm graded stone aggregate finishing cement concrete surface even & fair complete all as specified and as directed.

S&F 20mm outer dia. CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including cutting through walls together with all fittings (such as bends, elbow, tees, short pieces, comnnector, backnuts, diminishing pieces, caps, plugs and unoin etc) with clips wall hook plugs, complete all as specified.

S&F 32mm outer dia. CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including cutting through walls together with all fittings (such as bends, elbow, tees, short pieces, comnnector, backnuts, diminishing pieces, caps, plugs and unoin etc) with clips wall hook plugs, complete all as specified.

Disconnecting existing tanks of capacity 250 ltrs and not exc 500 ltrscapacity setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position, Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. including writing date of cleaning on tank using stencil in white syntheic paint height not exc 10cm complete all as specified and as directed

S&F Rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top) (conforming to IS 12701-1996) multi layer hoisted and fixed in position 500 ltrs capacity complete all as specified in SSR Part I, including writing date of cleaning on tank using stencil in white syntheic paint height not exc 30cm ("DATE OF INSTALLATION: DATE") and necessary dismantling old unserviceable tank complete all as specified and as directed

S&F in repairs 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm - 210 gms) complete all as specified and directed.

S&F Vitreous China urinals, half stall pattern, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; complete all as specified and as directed Make-JAQUAR CAT No-URS-WHT-13261 or equivalent as approved by GE from list of approved makes.

S&F curved shaped urinal partition with frosted glass 8mm thick, 900mm height, 450mm wide, complete all as specified and as directed Make-JAQUAR CAT No-JSE-CHR-810UC450X or equivalent as approved by GE from list of approved makes.

S&F Table top basin,size :420x420x150mm including 32mm waste fitting brass, chromium plated with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed including 15mm bore PVC Connection with PTMT nut of length 450 mm complete all as specified and as directed Make of Table top basin-JAQUAR CAT No-JDS-BLM-25911 equivalent as approved by GE from list of approved makes.

S&F 15mm pillar cock with wall flange all as specified and as directed make -JAQUAR CAT NO-KUP-CHR-35001PM or equivalent as approved by GE from list of approved makes.

S&F Reflection looking mirror of 6mm thick fixed to wall with chromium plated brass screws and cup washers all as specified and as directed.

S&F Towel ring roung with round flange complete all as specified and as directed Make -JAQUAR CAT NO-CAN-CHR-1121BN or equivalent as approved by GE from list of approved makes.

S&F Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and as directed.

S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including 150mm cement concrete (1:5:10) type E-2 using 40mm graded crushed stone aggregate) complete all as specified and as directed.

S&F Wall hung slim flushing cistern low level white colour including PVC flush pipe of required length including 15mm bore PVC Connection with PTMT nut of length 450 mm complete all as specified and directed. Make -JAQUAR CAT NO-JAH-WHT-184NBTL or equivalent as approved by GE from list of approved makes.

S&F 15mm Bib cock with wall flange all as specified and as directed make -JAQUAR CAT NO-KUP-CHR-35037PM or equivalent as approved by GE from list of approved makes.

S&F Rimless single piece-WC with UF soft close slim seat cover , Hinges, Dual flushing cistern fitting,Fixing accessories set and accessories set, Cistern fitting, Size: 385x720x710mm,S trap-300mm all as specified and as directed Make-JAQUAR CAT No-ONS-WHT-10853S300UFSM or equivalent as approved by GE from list of approved makes.

S&F 15mm 2 Way bib cock with wall flange all as specified and as directed make -JAQUAR CAT NO-KUP-CHR-35041PM or equivalent as approved by GE from list of approved makes.

S&F health faucet (ABS Body) with 8mm dia, 1 meter long flexible tube & wall hook all as specified and as directed Make-JAQUAR CAT No-ALD-CHR-565 or equivalent as approved by GE from list of approved makes.

S&F toilet paper holder with stainless steel strap complete all as specified and as directed Make-JAQUAR CAT No-CAN-CHR-1153S or equivalent as approved by GE from list of approved makes.

S&F 15mm angular stop cock with wall flange all as specified and as directed Make -JAQUAR CAT NO-OPP-CHR-15053PM or equivalent as approved by GE from list of approved makes.

S&F 15mm bore stop valves Stop valves, fancy type,chromium plated with long shank and cup cast (concealed type) copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F 110mm UPVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/Ceilings including dismantling existing unserviceable pipe complete all as specified and as directed..

S&F 75mm UPVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/Ceilings including dismantling existing unserviceable pipe complete all as specified and as directed..

S&F 110mm dia UPVC (SWR) bends of any radius complete all as specified and as directed.

S&F UPVC (SWR) vent cowl of 110mm dia all as specified and directed.

S&F in repairs UPVC(SWR) gully trap 125x110 mm including jointing with solvent cement all as specified and directed.

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for column & wall foundation, UG Cable /Pipe etc. and getting out in soft/loose soil complete all as specified and directed.

M&L PCC (1:3:6) type C-2 (using 40 mm graded stone aggregate) as in mass concrete, complete all as specified and as directed.

M&L Brickwork with sub class ‘B’ bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and as directed

M&L Rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:4 for finished surface even and fair without using extra cement complete all as specified and as directed.

M&L providing plain cement concrete type B-1, (1:2:4), (using 20 mm graded stone aggregate), as in copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed i complete all as specified and directed.

M&L PCC (1:3:6) type C-2 (using 40 mm graded stone aggregate) as in benching benching for and forming branch channel (1/2 round or 3/4 section)complete all as specified and as directed.

M&L TMT Bars 8mm dia, cut to length, bent to shape as required including Cranking, Bending, Hooking Ends and binding with Mild Steel Wire (annealed) not less than 0.9mm dia, complete all as specified and as directed.

M&L 150mm bore Reinforced concrete pipes, class NP2, laid and jointed complete with collars all as specified and as directed.

M&L 150mm bore Concrete bed 1:3:6 type C-2 to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n exc 25 cm layers in soft/loose soil complete all as specified and directed.

Removing excavated material (Soil) not exceeding 50 metre and depositing where directed at a level not exceeding 1.50 metre above the starting point complete all as specified and directed.

M&L for RCC (nominal mix) (1:2:4) type B1 using 20mm graged stone agreegateSlabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L formwork Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) finished fair, flat complete all as specified and directed.

M&L brick work with sub class 'B' bricks, old size bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and directed. .

M&L 18-20 mm Granite (of any type) thick machine cut, as in table slab for table top basin, for bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete including 20mm thick screed bed or bedding layer cement mortar (1:6) and making hole for waste coupling complete all as specified and directed.

M&L Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

M&L 18-20 mm Granite (of any type) thick machine cut, as in table slab for table top basin skirting/vertical surface, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete including 15mm thick screed bed or bedding layer cement mortar (1:4) complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials from site and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed.

Taking down unserviceable main switches and DB's including MCB;s of any size and capacity complete all as specified and as directed.

M&L for concealed point wiring with two single core 1.5 Sq.mm size FRLSH multistranded copper conductor PVC insulated cables and one single core 1.5 Sq.mm size green FRLSH colour PVC insulated,multistranded copper conductor PVC cable as earth continuity conductor,1100 volts grade, complete drawn in and including 20mm(minimim) medium grade rigid PVC CONDUIT and conduit accessories i.e. joint boxes, terminal boxes for mounting or housing switches, socket outlets, fan regulators, etc. confirming to IS specifications, including provision of flush modular mounting boxes, with back plate and cover plate of appropriate size & thickness for mounting switch, sockets etc. with including cutting chases for conduits & sinkings for MS Sunken boxes & making good to walls, floors etc. complete all as specified & as directed for the following :-

One light point/Ceiling fan/Exhaut fan/bell point controlled by one way switch 5/6 amps.

One socket out let 5/6 amps point on the same board controlled by one way switch 5/6 amps.

One socket out let 5/6 amps point on the independent board controlled by one way switch 5/6 amps.

M&L for concealed point wiring for one socket out let 15/16 amps point on the independent board with two single core 4 Sq.mm size FRLSH multistranded copper conductor PVC insulated cables and one single core 4 Sq.mm size green FRLSH colour PVC insulated,multistranded copper conductor PVC cable as earth continuity conductor,1100 volts grade, complete drawn in and including 20mm(minimim) medium grade rigid PVC CONDUIT and conduit accessories i.e. joint boxes, terminal boxes for mounting or housing switches, socket outlets, etc. confirming to IS specifications, including provision of flush modular mounting boxes, with back plate and cover plate of appropriate size & thickness for mounting switch, sockets etc. with including cutting chases for conduits & sinkings for MS Sunken boxes & making good to walls, floors etc.complete all as specified & as directed

S&F LED lights fitting 1x 20Watt, (or nearest next higher wattage) 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

S&FLED light fitting mirror type with high out put diffuser 2 feet, 10 watt (or nearest next higher wattage) 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

S&F LED light fitting 1X10Watt (or nearest next higher wattage) bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

S&F exhaust fan, steel body AC single Phase. 230Volts of size 300m sweep with, blades, and frame and louvers including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

S&F Modular type switch piano white 6 Amps single pole one way 01 module complete all as specified.

S&F Modular type Socket outlet white 6 Amps 5 pin 2 module complete all as specified and as directed.

S&F Modular type Socket outlet white 16 Amps 5 pin 2 module complete all as specified and as directed.

S&F Modular type switch piano white 16 Amps single pole one way 01 module complete all as specified and as directed.

S&F ceiling rose, 3 phase PVC/ polycarbonate, insulated body, three terminals, complete all as specified and as directed.

S&F, Sheet metal enclosure for 4 way Distribution Boards (DB’s), IP-43 double door, Ttiple pole & neutral with 200 amps rated bus bar, including blanking plates as required and fixed to wall surfaces complete all as specified and as directed. .

S&F, Sheet metal enclosure for 8 way Distribution Boards (DB’s), IP-43 double door, Single pole & neutral with 200 amps rated bus bar, including blanking plates as required and fixed to wall surfaces complete all as specified and as directed. .

S&F MCB, TPN, C Series 240 Volts, 63 Amps 50 HZ, 10KA complete all as specified and as directed.

S&F MCB, SPN, C Series 240 Volts, 40 Amps 50 HZ, 10KA complete all as specified and as directed.

S&F MCB, SP, C Series 240 Volts, 6-32 Amps 50 HZ, 10KA complete all as specified and as directed.

M&L earthing with GI earth plate electrode 600x600x6mm thick buried directly in ground vertically to depth not less than 2.25m below the ground level with top edge of earth plate at a depth not less than 1.5m below the ground level connected to galvanized iron wire 4mm dia earth lead by means of bolts & nuts,check nuts & washers made of galvanised steel, earth wire protected by and including PCC (1:2:4) type B1 precast RCC cover slab (1:2:4) reinforced with 8mm dia TMT bars 100mm center to center bothways including one handle made of 10 mm dia round bar, including necessary excavation and earthwork in any type of soil, 20 mm dia medium grade galvanized steel tube for watering with one end fixed with cast iron funnel and wire mesh, 15 mm bore medium grade galvanized steel tubing for drawing earth wire GI strip protection & common salt, charcoal in alternate layers etc. complete all as shown in EP No 3 of SSR Part 1 and testing on completion complete all as specified and as directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sqmm 4 core complete all as specified and as directed.

Supply and laying for brick protection for protection of cable over sand cushioning cables inside the trench by using common brunt clay building bricks sub-class “B” old size brick and flat and width wise along the axis of the trench complete all as specified and directed.

M&L for sand cushioning in cable trenches over & under the cable, with river washed coarse sand, as per standard practice with proper compaction complete all as specified and directed. NOTE : Punned thickness 18cm shall be considered for payment as per para 19.75 of SSR Part-I.

S&F in repair, 90mm outer diameter, 3- layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches, including taking out the old unserviceable 80mm GI pipe complete all as specified and as directed.

S&F in repair, 32mm outer diameter, 3- layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches, including taking out the old unserviceable 25mm GI pipe complete all as specified and as directed.

S&F in repair, 90mm outer diameter, PP-R Gate valves (brass insert) as per requirement of the site, complete all as specified and as directed.

S&F in repair, 32mm outer dia PP-R Gate valves (brass insert) as per requirement of the site complete all as specified and directed.

M&L Construction Brick Masonry Valve Pit of size 1200x12000x1200 mm (Internal Dimension) one Brick thick Wall in Cement Mortar 1:4 on 100mm thick PCC 1:4:8 (40mm graded aggregate) in Foundation, Rendering 15mm thick internally and externally upto 150mm below GL, providing 3.0mm thick MS Sheet Valve Pit Cover, welded with 40x5mm Flat Iron Frame alround including provision of Hinges, Handle with Locking Arrangement and 40x40 x6mm Angle Iron Frame fixed on top of Valve Pit by means of holdfast 150mm long, embedd -ed in PCC 1:2:4 (20mm graded aggregate) Block of size 230x200x100 mm, applying two coats of Anti-corrosive Paint to all exposed Steel Surfaces over a coat of red oxide zinc chrome Primer after preparation of Surfaces and necessary Earth Work in Soft/ Loose Soil including demolition of unserviceable Valve Pit, complete all as specified and as directed.

M&L concealed sub-main wiring alongwith earth wire of size of 2 x 6.0 sq. mm + 1 x 6.0 sq. mm earth wire, ISI marked, FRLSH, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including PVC rigid conduit (medium grade) of 20mm dia (Medium Grade) with all fittings and accessories ISI marked including cutting chases for conduits & making good to walls, floors etc, dismantling existing unserviceable sub main wiring complete all as specified and as directed. Notes;- (i) 2 Runs of 6Sqmm main cable and 1Run of 6Sqmm earth wire along with 1 Run of PVC conduit with acessories shall be measured as one unit length (ii) Rate is deemed to be inclusive cutting chases and making good the distrubed surfaces of wall etc (iii) Loop length as required and as directed deemed to be included in the UNIT RATE QUOTED.

S & F of 300 mm long (Length of bolt) aluminum alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast of extruded sections and fixing bolts and sliding bolt of extruded sections or case aluminum alloy complete all as specified and as directed

U S CONSTRUCTION

M/S M Ahmed and Co.