Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.9 LAccepted-AOC | L1 | Accepted-AOC LOWEST | |
| 2 | L2₹45.9 L+₹13.0 L (39.6%)Rejected-Finance PLOT NO 39 SHRI SHIVE NAGAR 05 MOTI BANDHA MACHEDA HARMADA JAIPUR 302013 RAJ | JAIPUR | JAIPUR | RAJASTHAN | 302013 | L2 | Rejected-Finance Due to not lowest |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
26 May 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE North Bikaner
GE North Bikaner Rajasthan
WELCOME MAINTENANCE AND OTHER CONNECTED WORKS FOR OFFRS MD ACCN UNDER ZONE A AND ZONE B UNDER GE NORTH AT MIL STN BIKANER
2022_MES_522682_1
GE (N) BKN TOKEN NO 17 /2022-2023
Open Tender
Miscellaneous Works
Item Rate
335 days
GE (N) BIKANER
Class D category a i
7 documents required · 7 mandatory
₹500
GE North Bikaner
₹90,000
Yes
9 Jun 2022
7 May 2022
28 May 2022
7 May 2022
26 May 2022
14 May 2022
Amount
M&L Dismanting floor, hearth or wall tiling including cement mortar bedding and removal of rubbish out of the premises complete all as per specified and directed by Engr-in-Charge
Hacking out old broken glass (any thickness, size, quality or description) from wooden frame or stone concrete or brick surrounds glazed with putty or fixed with beads complete all as per specified and directed by Engr-in-Charge
Dismantling pipes of any desc fixed to wall or laid under floor complete all as per specified and directed by Engr-in-Charge
Dismantling cast iron pipes of any desc fixed to wall or laid under floor complete all as per specified and directed by Engr-in-Charge
Taking down cement plaster on brick or stone walls, including raking out joints, hacking for key, scrubbing down with water complete all as per specified and directed by Engr-in-Charge
Taking up or down steel tubing 15 mm dia and connections and stacking neatly for offering credit complete all as per specified and directed by Engr-in-Charge
All as per item No 6 above, but 20 mm dia complete all as per specified and directed by Engr-in-Charge
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size n. exc 1.5 Sqm each complete all as specified and as directed by Engineer-in-Charge.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size exc 1.5 Sqm but not exc 4.0 Sqm each complete all as specified and as directed by Engineer-in-Charge.
Taking down shutters of any description, area exceeding 1.00 sqm and n.exc 2.00 sqm each complete all as specified and as directed by Engineer-in-Charge.
M&L for welding in repairs n.exc 2.5 cm in length and not exceeding 6mm thick of metal complete all as specified and directed by Engineer-in-Charge.
S&F 1.25 mm thick Pressed steel frames of size 125mm x 60mm for single doors including necessary fixing lugs, hinges, lock strike plate, etc complete all as per IS provns complete all as per specified and directed by Engr-in-Charge
S&F 1.25 mm thick Pressed steel frames of size 105mm x 60mm for single doors including necessary fixing lugs, hinges, lock strike plate, etc complete all as per IS provns complete all as per specified and directed by Engr-in-Charge
Second class hard wood plain, framed, panelled shutters 35mm thick, (any number of panels) with panels of timber flat on both sides (feather edged) or of veneered partcile board medium density wood particle board with commercial faces venners supplied and fixed to chowkats complete all as per specified and directed by Engr-in-Charge
Second class hard wood, glazed and skelleton shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc without sash bar, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing gauze etc, size of members as directed supplied and fitted to chowkats complete all as per specified and directed by Engr-in-Charge
M&L for 25 mm thick Flush shutters for cupboards solid core construction, with block board core, and ply wood face panels, both faces covered with decorative face veneer with lipping to match complete all as specified and as directed by Engineer-in-Charge.
Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube suppling & fixing in opening complete all as per specified and directed by Engr-in-Charge
Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bttom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail, Panneling of plain color PVC sheet to be fitted in the MS frame welded /sealed to the stiles &rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site complete all as per specified and directed by Engr-in-Charge
S&F steel window / ventilators pressed steel framed (box type) factory made glaged and guaged with side hung shutters including pintol hinges, steel handles, steel peg stay and all locking arrangement complete with glazing bars dovetailed or welded incl a prov of cooler / Ac opening with shutter including one shop coat of red oxide primer complete all as per specified and directed by Engr-in-Charge Note : i) The window shall be fabricated as per Drg No CEBZ/888R & 889 Sheet 1 to 4. ii) MS fillets, glazing, wire gauge shall be measured and paid separately.
S&F framed work such as grills ,framed guard bars barred iron doors ;ladders framed balusters railings and similar work conforming to Fe 410-0or Fe 310-0 complete all as per specified and directed by Engr-in-Charge
S&F Stainless steel wire cloth o.36mm nominal dia of wire and average width of aperature 1.40mm and fixed with stainless steel wire staples complete all as per specified and directed by Engr-in-Charge
S&F Stainless steel wire cloth o.36mm nominal dia of wire and average width of aperature 1.40mm and fixed in repair with stainless steel wire staples complete all as per specified and directed by Engr-in-Charge
Second class hard wood, plain, solid, straight chowkats and frames, wrought, framed rebated on the soild, rounded or chamfered, put together with glue pinned at joints complete all as per specified and directed by Engr-in-Charge
Second class hard wood,in scantling wrought, in timber fixed complete all as per specified and directed by Engr-in-Charge
Teakwood beading 20x60mm half round complete supplied and fixed complete all as per specified and directed by Engr-in-Charge
S&F 18/19 mm plywood, grade 1 (with BWR resistant /termite proof) with fixed with screws to timber frame work as in cup boards /cabinets complete all as per specified and directed by Engr-in-Charge (Make : Century/Kitply/ or other app by GE)
M&L for water proofing block boards 18/ 19 mm , grade 2 exterior quality grade , commercial type fixed with screws to timber frame work complete all as per specified and directed by Engr-in-Charge
M&L for 0.9 mm thick decorative choice of laminates type -I of surface finish white stuck with imported adhesive on sides of board complete all as per specified and directed by Engr-in-Charge .(Make Corby,or Euro)
Prelaminated partical board 19/20mm medium density ,prelaminated with one side with decorative choice laqmination and other side balancing with white lamination fixed with screws as in shelves to kitchen almirah and cub board fixed in repair complete all as per specified and directed by Engr-in-Charge
S&F 18/19mm thick plywood grade (Termite treated / water proof) ,type BB fixed with screws to timber frame work complete all as per specified and directed by Engr-in-Charge (Make:Green Ply/Kit ply)
S&F 12mm thick plywwod grade BWR , type BB , fixed with screws to timber frame work complete all as per specified and directed by Engr-in-Charge
S&F 6mm thick plywwod grade BWR , type BB , fixed with screws to timber frame work complete all as per specified and directed by Engr-in-Charge
M&L for 0.9 mm thick decorative choice of lamination type -1 of surface finish , colour and pattern as approved adhesive as per manufacturers instructions complete all as per specified and directed by Engr-in-Charge
M&L for 1.50 mm thick pvc laminated decorative impression choice of lamination type -1 of surface finish , colour and pattern as approved adhesive as per manufacturers instructions complete all as per specified and directed by Engr-in-Charge (Corby/Duco).
S&F stain less steel catcher of superior quality complete all as per specified and directed by Engr-in-Charge
S&F stain less steel pivoted type hinges of superior quality complete all as per specified and directed by Engr-in-Charge
S&F 75mm long brass handle of desired finish with screws complete all as per specified and directed by Engr-in-Charge
S&F 35mm long mortice lock complete all as per specified and directed by Engr-in-Charge (Make :Godrej/Harrison)
S&F 75mm long brass tower bolt of desired finish with screws complete all as per specified and directed by Engr-in-Charge
S&F Drawer side channel of std size and incl of rooler for moving drawer,mild steel bright finish,or electrogalavanised width of flap 30mm & Length 60 mm complete all as per specified and directed by Engr-in-Charge
S&F stainless steel fancy type,bright finish handles fixed with screw,of 125mm size complete all as per specified and directed by Engr-in-Charge .
S&F stainless steel multipurpose bracket in wooden/partitions for storing rations types made of 4mm dia stainless steel rods,fixed in side partition complete all as per specified and directed by Engr-in-Charge .Make:- Usha Shriram Enpt or equivalent).
S&F stainless steel luddel-craddle hanging stand for cutlery complete all as per specified and directed by Engr-in-Charge .Make:- Usha Shriram Enpt pvt ltd.
S&F stainless steelzero crank hinges fancy type(with euro concealed hinges complete all as per specified and directed by Engr-in-Charge Make:-AVIS GOLD or equivalent) fixed to shutter in cub board of std size and shape complete all as per specified and directed by Engr-in-Charge
S&F 7S&F sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm including fixing contilever brackets and connecting union to pipe complete all as per specified and directed by Engr-in-Charge
M&L for Recessed type stain less steel handle for cup boards size 150 mm long complete all as per specified and directed by Engr-in-Charge
M&L for roller (PVC / Stain less steel ) suiltable for sliding shutters complete all as per specified and directed by Engr-in-Charge
PVC Toilet cabinet with shelves and shutters fixed with looking mirror of size 600 x 450 mm complete all as per specified and directed by Engr-in-Charge (Make : Commander or equivalent)
s&f Continous (Piano) hinges 30mm wide mild steel bright hinges 30 mm with flap,MS bright finished or electrogalvanised complete all as per specified and directed by Engr-in-Charge
Hasp and staple 100mm aluminium anodised, safety type, with mild steel hinges pin including bolt to hinge plate and fixed with screws complete all as per specified and directed by Engr-in-Charge
S&F Mild Steel Peg set stay 300 mm with and incl screws and bolts complete all as per specified and directed by Engr-in-Charge
Butt hings, 100 mm long, extructed aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as per specified and directed by Engr-in-Charge
S&F Butt hings, 100 mm long, extructedISI marked complete all as specified and directed by Engr-in-chargefixed complete all as per specified and directed by Engr-in-Charge
Extruded aluminium alloy handles, 100 mm long, fabricated type anodised complete all as per specified and directed by Engr-in-Charge
Aluminium, anodised , 100 mm long, barrel tower bolts of extruded section and fixed complete all as per specified and directed by Engr-in-Charge
Extruded aluminium alloy handles, 150 mm long, fabricated type anodised complete all as per specified and directed by Engr-in-Charge
Aluminium, anodised , 150 mm long, barrel tower bolts of extruded section and fixed complete all as per specified and directed by Engr-in-Charge
Supply and fix floor door stopper of aluminium alloy body, overall length of cover plate 140 mm and tongue anodised with hard drawn steel sring fixed in floor complete all as per specified and directed by Engr-in-Charge
Aluminium alloy, anodised, slidding door bolt 300mm long, with hasp staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as per specified and directed by Engr-in-Charge
Mild steel, 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete fixed in repair complete all as per specified and directed by Engr-in-Charge
Figured glass, pin head type, 4mm thick and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as per specified and directed by Engr-in-Charge
3 mm thick sheet glass, ordinary quality and glazing with oil putty in square not execeeding 0.5 sqm in each pane for metal frames complete all as per specified and directed by Engr-in-Charge
S&F anodised aluminium frame for doors, windows , ventilators with one or more rebates includirg joining cleat for fixing etc complete all as per specified and directed by Engr-in-Charge
S&F Sheet glass, ordinary quality 5.5 mm thick for Aluminium door ,window and Vent.and glazing in square n exc 0.5 sq.m in each pane complete all as per specified and directed by Engr-in-Charge
S&F Neoprene/ EPDM rubber gasket for fixing sheet glass complete all as per specified and directed by Engr-in-Charge
M & L PCC 25 mm thick 1:2:4 type B0 (12.50 mm graded aggregate) in any position in ground floor/roof complete all as specified and as directed by engr-in-charge.
M & L PCC 75 mm thick 1:3:6 type B0 (12.50 mm graded aggregate) in any position in ground floor/roof finishing cement concrete surface without using extra cement complete all as specified and as directed by engr-in-charge.
M & L PCC 1:2:4 type B1 (20 mm graded aggregate) as in hold fast blocks rungs etc icluding necessary form work complete all as per specified and directed ny Engr-in-Charge
M & L PCC 1:3:6 type C0 (12.50 mm graded aggregate) as in filling in pressed steel frames complete all as specified and as directed by engr-in-charge.
M and L for coloured Non skid ceramic tiles exceeding 0.11 sqm but not exceeding 0.18 sqm 7 to 8mm thick in floors set and jointed in neat cement slurry and pointed in coloured cement to match the floor laid over 15mm thick screed in cement mortar 1:6 complete all as per specified and directed by Engr-in-Charge
Glazed ceremic tiles white 450X300mmX7mm thick coloured,set and jointed in neat cement slurry and pointed in white cement or coloured to match colour matching with floor tiles as on vertical surfaces laid over 10mm thick cement screed in 1:4 complete all as per specified and directed by Engr-in-Charge
M&L Chequered cement concrete tiles 25 cm x 25 cmx25mm thick with grey cement and no pigment set jointed and pointed in neat cement slurry in floors including 15 mm thick screed bed in cement and sand mortar 1:4 complete all as per specified and directed by Engr-in-Charge
M&L for vitrified tiles not exceeding 0.36 Sqm 10 mm thick in floors set and jointed in neat cement slurry and pointed in neat cement s;urry in floors including 15 mm thick screed bed in cement and sand mortar 1:4 complete all as per specified and directed by Engr-in-Charge
M&L for vitrified tiles not exceeding 0.36 Sqm 10 mm thick in floors set and jointed in neat cement slurry and pointed in neat cement s;urry in floors including 15 mm thick screed bed in cement and sand mortar 1:4 complete all as specified but in vertical surface complete all as per specified and directed by Engr-in-Charge
M and L for 20mm thick granite machine cut slab table rubbed and polished granite as on cooking platforms incl. pointing in white cement 1:2 using marble dust with admixture of pigment to match with marble shade laid over 20mm thick cement screed in cement mortar 1:6 complete all as per specified and directed by Engr-in-Charge
Rendering 10 mm thick in CM 1:6 on other than fair faces of brick work or concrete surfaces finished fair and even complete all as per specified and directed by Engr-in-Charge
Rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished fair and even complete all as per specified and directed by Engr-in-Charge
Rendering 5mm thick on fair faces of conc. Surfaces in cement mortar 1:3,even and smooth w/o using extra cement as on ceiling complete all as per specified and directed by Engr-in-Charge
Tubes, medium grade galvanised, 15 mm bore with all fittings and fixed to walls and ceilings or laid in floors complete all as per specified and directed by Engr-in-Charge
Tubes, medium grade galvanised, 20 mm bore with all fittings and fixed to walls and ceilings or laid in floors complete all as per specified and directed by Engr-in-Charge
S&F Aluminium sheeting 0.56 mm thick alloy 31000 H4 in ridges, Hips, valley gutter drip and straight flashing(length and girth as fixed) complete all as per specified and directed by Engr-in-Charge
Mild steel work as in hold fasts, clamps, bands, straps etc conforming to Fe 410-0 complete all as per specified and directed by Engr-in-Charge
Sinks with drainage board made of stainless steel 1mm thick kitchen or laboutery with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460mm bowl size 410 mm 330 mm x 160mm complete all as per specified and directed by Engr-in-Charge
Stainless steel plate rack, tubular type, with fixing arrangement 900mm x 900 mm size complete all as per specified and directed by Engr-in-Charge
S & F glass corner of size 300mmx300mm with 5.5 mm thick glass and steelness steel clip and steelness steel railing allround the shelf complete all as specified and directed by engineer in charge .
PVC (SWR) pipes 75 mm bore, single socketed, in any length with rubber ring jointed fixed to walls complete all as per specified and directed by Engr-in-Charge
PVC (SWR) pipes 110mm bore, single socketed, in any length with rubber ring jointed fixed to walls complete all as per specified and directed by Engr-in-Charge
PVC (SWR) branch piece, single (single Y) equal or unequal, 75mm bore complete all as per specified and directed by Engr-in-Charge
PVC (SWR) vent cowl 75 mm complete all as per specified and directed by Engr-in-Charge
PVC (SWR) Floor trap 75 mm, plain with grating including jointing with solvent cement complete all as per specified and directed by Engr-in-Charge
PVC (SWR) branch piece, single (single Y) equal or unequal 110mm bore complete all as per specified and directed by Engr-in-Charge
PVC (SWR) bends any radius 75mm bore complete all as per specified and directed by Engr-in-Charge
PVC (SWR) bends any radius 110mm bore complete all as per specified and directed by Engr-in-Charge
PVC (SWR) gully trap 125/110 mm setting and jointing with solvent cement complete all as per specified and directed by Engr-in-Charge
S&F in repair Stack clamp out of 40mm x3mm flat iron stays with rubber gasket covering including bolt and nuts,spacer and securing ends of stays to walls or roof for 50mm bore piece complete all as per specified and directed by Engr-in-Charge
S&F in repair Stack clamp out of 40mm x3mm flat iron stays with rubber gasket covering including bolt and nuts,spacer and securing ends of stays to walls or roof for 100mm bore piece complete all as per specified and directed by Engr-in-Charge
Disconnecting existing tanks, setting aside (or lowering if required) for repairs cleaning etc and hoisting if required reconnecting and refixing in position after cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc complete (capacity of tanks exc 250 ltr and n exc 500 ltrs) complete all as per specified and directed by Engr-in-Charge
S&F Rotational moulded double layer ( ISI marked of app make ) polythene water storage tank (cylindrical vertical with closed top)hoisted and fixed in position of 500 ltrs including dismantling existing complete all as per specified and directed by Engr-in-Charge
Ball valve high pressure of PTMT with epoxy coated almn rod and high density plastic ball screwed for iron pipe and fixed fixed in repair.of 20mm complete all as per specified and directed by Engr-in-Charge Make : Prayag or equivalent.
S&F brass CP wall mixer non telephonic for mixing hot and cold water screwed down for iron pipe 15mm bore complete all as per specified and directed by Engr-in-Charge (Make : Parryware or Hindware or equivalent).
S&F brass CP WHB mixer non telephonic for mixing hot and cold water screwed down for iron pipe 15mm bore complete all as specifie and as directed by Engr-in-charge . (Make : Parryware or Hindware or equivalent).
S&F vitreous china wash down water closet pan with fixing bolts, trap (pedestal pattern), white, (excluding flushing cistern and flush pipe) complete all as per specified and directed by Engr-in-Charge
Suplly and fix vitreous china wash hand basin flat back size 550 x 400mm including cutting for and pinning in ends of brackets or erecting stand etc complete fixed in repairs complete all as per specified and directed by Engr-in-Charge
S & F PVC valveless (syphon internal fitting) of PVC low level action type flushing cistern, 10 ltr capacity low level , white with inlet, ball valve, float and handle including brackets fixed in repairs complete all as per specified and directed by Engr-in-Charge
S & F PVC valveless syphonic action type flushing cistern, 10 ltr capacity low level , white with inlet, ball valve, float and handle including brackets fixed in repairs complete all as per specified and directed by Engr-in-Charge
PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as per specified and directed by Engr-in-Charge
S&F Stainless steel tubular towel rail, 200 mm dia D type 60cm long between flanges complete all as per specified and directed by Engr-in-Charge
Bib tap 15 mm dia, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe and fixed in repairs complete all as per specified and directed by Engr-in-Charge (Make : Parryware or Hindware or equivalent)
Bib tap 15 mm dia, LONG BODY fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe and fixed in repairs complete all as per specified and directed by Engr-in-Charge (Make : Parryware or Hindware or equivalent)
Stop valve, 15 mm dia, fancy type, Chromium plated, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repairs complete all as per specified and directed by Engr-in-Charge
Stop valve, 15 mm dia, concealed stop valve fancy type, Chromium plated, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repairs complete all as per specified and directed by Engr-in-Charge
Pillar taps, 15mm dia, fancy type, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, long screwed shanks and fly nuts, screwed for iron pipe and fixed in repairs complete all as per specified and directed by Engr-in-Charge MAKE: JAQUAR OR EQUIVALENT
Brass chromium plated shower rose 125 mm size including fixing to steel pipe or union fixed in repairs complete all as per specified and directed by Engr-in-Charge MAKE: JAQUAR OR EQUIVALENT
Brass chromium plated shower arm 15 mm 195 mm long with bend 45 degree mm size including fixing to steel pipe or union fixed in repairs complete all as per specified and directed by Engr-in-Charge MAKE: JAQUAR OR EQUIVALENT
S&F sheet glass shelf assembly in repair , oconsisting of 5.5 mm thick sheet glass shelf 12 cm wide chromium plated bracket guard and railing 60 cm long complete all as per specified and directed by Engr-in-Charge
Plastic water closet seat,white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging devicecomplete all as per specified and directed by Engr-in-Charge
S&F CP Health Faucet fixed type suitable for EWCs with 1,5 mtr stainless steel tube complete all as specified and directed by Engineer-in-charge of MAKE : JAQUAR, PRAYAG
S&F CP toilet paper holder fancy type complete all as specified and directed by Engineer-in-charge.MAKE: JAQUAR OR EQUIVALENT
S&F angle valve cast copper alloy fancy type CP with long shank and cup and screwed for iron pipe fixed in repair complete all as per specified and directed by Engr-in-Charge MAKE: JAQUAR OR EQUIVALENT
S&F Waste pipe 32mm for WHB with coupling fixed in repairs complete all as per specified and directed by Engr-in-Charge
M&L for Along the wall below concrete or masonry using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc complete all as per specified and directed by Engr-in-Charge
M&L for Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as per specified and directed by Engr-in-Charge
S&F grating doom 125 mm dia with waste hole of PTMT (minimum weight 40 gms) complete all as per specified and directed by Engr-in-Charge
Chromium plated soap dish complete all as specified and directed by Engineer-in-charge
S&F Aluminium snake bead with bush duly fitted with screws with length equal to door width complete all as per specified and directed by Engr-in-Charge
M&L for repairing of rolling shutters making functional by providing greasing oiling , welding etc.including taking down rolling shutters or hood complete all as per specified and directed by Engr-in-Charge
S&F safety lever locks mild steel with 4 levers for rolling shutters complete all as per specified and directed by Engr-in-Charge
S&F Ball bearing for rolling shutterscomplete all as per specified and directed by Engr-in-Charge
Taking down carefully existing unserviceable Copper/aluminum batten/surface conduit/concealed conduit point wiring (light, fan, bell/buzzer, socket or power) complete including removal of unserviceable fittings such as switches, switch-sockets, ceiling roses, pendents, sockets, lamp holders, shades, fan regulators, light fittings, bells etc (including old MS sunken boxes) and removing the retrieved materials from dismantling including making good the disturbed surface of walls, floors, ceilings etc to match with the adjoining work complete all as specified and as directed by the Engr-in-Charge.
M&L Point wiring with stranded copper conductor cable, 1100 volts grade (ISI marked) PVC insulated and unsheathed of size 1.5 Sq mm single core in and including PVC concealed conduit Medium grade with all fittings such as tees, bends etc terminating in and including sunken box covered with and including 3 mm thick bakelite laminated sheet top cover ‘Hylam’ for one fan or light or 5Amps socket or exhaust fan or bell/buzzer point controlled by one switch including provision of 1.5 Sqmm PVC insulated unsheathed copper conductor cable, single core as earth wire to common earth & connecting to earth dolly complete all as specified and directed by Engineer-in-Charge.
All as per item No 132 here-in-before but socket point on the same board with other switches complete all specifed as directed by Engineer - In - Charge
All as per item No 132 here-in-before but cable of 2.5 Sq mm for 15 Amp switch socket outlet on independent board including provision of 2.5 Sqmm PVC insulatred unshethed multistranded copper conductor as earth wire complete all specifed as directed by Engineer - In - Charge
All as per item No 132 here-in-before but for one light point control by two way switch complete all as specified and as directed by Engineer-in-Charge.
S&F Decorative ultra slim linear LED T5 Batten lightening fixture, Eco friendly energy efficent 10/12Watt complete all as specified and directed by engineer-in-charge. Make Syska / Havells/Phillips
S&F Decorative ultra slim linear LED lightening fixture, energy efficent 18/20 Watt complete all as specified and directed by engineer-in-charge. Make Surya /Phillips/wipro/CG /Bajaj
S&F Lamp holder insulated body with back plate for conduit/casing capping fittings with LED Bulb 9 W , ingress protection - IP44 complete all as specified and as directed by Engineer-in-Charge Cat Part No. SSK - LMS - 9W of make Syska/Havells/Phillips.
Supply & fix LED bulk head ,09W / 10 W, IP65 diacast aluminium housing powder coating finished complete all as specified and directed by Engineer-in-charge. Make Syska / havell's / Phillips.
S&F Switch piano Single pole 5 Amps, two way, complete all as specified and as directed by Engineer-in-Charge Make - Havells. Cona, SSK, wipro, Legrand
S&F in replacement switch piano flush type, Single pole 5 Amps, one way, complete all as specified and as directed by Engineer-in-Charge Make - Havells. Cona, SSK, wipro, Legrand
S&F in replacement of switch piano flush type, Single pole 15 Amps, one way, complete all as specified and as directed by Engineer-in-Charge Make - Havells. Cona, SSK, wipro, Legrand
S&F in replacement of socket outlet flush type, 3/5 pin, 5/15 Amps, complete all as specified and as directed by Engineer-in-Charge. Make - Havells. Cona, SSK, wipro, Legrand
S&F in replacement of socket outlet flush type, 3 pin, 5 Amps, complete all as specified and as directed by Engineer-in-Charge. Make - Havells. Cona, SSK, wipro, Legrand
S&F in replacement of ceiling fan regulator electronic type, 230 Volt, 150 Watt with 5 step of control including making holes in laminated bakelite sheet cover and connection complete all as specified and as directed by Engineer-in-Charge.
S&F in replacement of ceiling rose PVC/poly carbonate insulated body three terminal ISI marked, complete all as specified and as directed by Engineer-in-Charge
Supply and Fixing in replacement MCB single pole, 240 volts of rating 6-32 Amps of C curve breaking capacity of 10 KA complete all as specified and as directed by Engineer-in-Charge . Make Schnedier or equivalent in make GE, English Elect, L&T Exora series
Supply and Fixing in replacement MCB suitable for 6 to 32 Amps, 240 Volt AC supply C Curve single pole and neutral(SPN) with over load and short circuit protection having rupturing capacity not less than 10 KA complete all as specified and as directed by Engineer-in-Charge. Make Schnedier or equivalent in make GE, English Elect, L&T Exora series
Supply and Fixing in replacement MCB suitable for 63 Amps, 415 Volt AC supply C Curve Triple pole and neutral(TPN) with over load and short circuit protection having rupturing capacity not less than 10 KA complete all as specified and as directed by Engineer-in-Charge. Make : ABB/Legrand/Havells
S&F Bell Ding dong AC single pole 230volts complete all as specified and as directed by Engineer-in-Charge. Make : Havells,Cona,SSK,wipro, Legrand
S&F Bell push button Piano flush type single pole 5Amps complete all as specified and as directed by Engineer-in-Charge. make : Havells,Cona,SSK,wipro, Legrand
Taking down old sub main wiring any type or sizes complete all as specified and as directed by Engineer-in-Charge.
Sub main wiring in PVC Conduit with 2 single core 6 sqmm multi-stranded PVC insulated cable unsheathed 1100 volts grade with one earth wire of 6 sqmm copper conductor cable connected to common earth and earth dolly complete and including PVC Cassing and Capping all as specified and as directed by Engineer-in-Charge. (Note two run of 6 sqmm and one run of 6 sqmm will be measured as 1 RM.Make of cables: Nicco, L&T, Paragon, havells
All as per item No 153 above but of size 4 sqmm and earth wire of 4 sqmm complete all as specified and as directed by Engineer-in-Charge.
S&F in replacement Sheet metal enclosure for distribution boards flushed in wall Double door suitable for fixing MCBs 240 volts with 200 Amps rated bus bar,SPN 8 ways, including taking down of old unsv DB,s and making good the disturbed surface of wall, complete all as specified and as directed by Engineer-in-Charge. Make : Legrand / ABB/Havells Note : cost of cutting/chasing of wall and making good disturbed surface deemed to be included in the rate
Ditto item -154 but for 4 way SPN complete all as specified and as directed by Engineer-in-Charge.
S&F in replacement single pole and neutral enclosure with two pin and earth plug and socket including 1Nos MCB 20Amps capacity complete all as specified and directed by Engr-in-charge Cat Part No 607841 in Make Legrand or equivalent in schneider/Seimens/L&T
S&F in replacement Decorative wall light fittings complete made up of Polycarbonate, including with for retrofit 9 W LED lamp Complete all as specified and directed by Engr-in-charge. Make/ sample approved by Engr-in-charge : Surya / Havell's/ Phillips
S&F in replacement bad side light fitting with suitable LED bulb complete all as specified and directed by Engr-in-charge. Sample approved by Engr-in-charge and GE .
M&L Preparing of old decorated surfaces of wall and applying one coat of distemper oil emuision complete all as per specified and directed ny Engr-in-Charge
M&L Preparing of old decorated surfaces of wall and applying two coat of distemper oil emuision complete all as per specified and directed ny Engr-in-Charge
M&L Preparing surfaces of plaster or unplaster old surface of wall and applying one coat of white wash complete all as per specified and directed ny Engr-in-Charge
M&L Preparing surfaces of plaster or unplaster old surface of wall and applying two coat of white wash complete all as per specified and directed ny Engr-in-Charge
M&l Preparing surfaces of plaster or unplaster old surface of wall and applying one coat of white wash on ceiling complete all as per specified and directed ny Engr-in-Charge
M&l Preparing surfaces of plaster or unplaster old surface of wall and applying one coat of white wash on ceiling complete all as per specified and directed ny Engr-in-Charge
M&L Preparing old surfaces of wall and applying one coats of plastic emulsion paint complete all as per specified and directed ny Engr-in-Charge
M&L Preparing old surfaces of ceiing and applying one coats of plastic emulsion paint complete all as per specified and directed ny Engr-in-Charge
M&L Preparing old surface of wood of any desc over 10cm width or girth and applying two coats of synthetic enamel paint .over pink primer complete all as per specified and directed ny Engr-in-Charge
M&L Preparing new surface of steel of any desc over 10cm width or girth and applying two coats of synthetic enamel paint over red oxide complete all as per specified and directed ny Engr-in-Charge
M&l Preparing the old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as per specified and directed ny Engr-in-Charge
M&L Preparing new surface of steel of any desc over 10cm width or girth and applying one coat of synthetic enamel paint over red oxide complete all as per specified and directed by Engr-in-Charge
M&L Complete removal of existing treatment and Applying a thin layer of putty on wall surfaces complete all as per specified and directed by Engr-in-Charge
M&L Preparing new surface of old or new incl removal of old treatment ans applying a thin layer of plaster of paries to give a uniform finish complete all as per specified and directed by Engr-in-Charge
M&L Demolition of cement conc. In any description and incl any position not otherwise specially provided complete all as per specified and directed by Engr-in-Charge
JAGDAMBA CONSTRUCTION COMPANY
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .