Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.8 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹38.7 L+₹3.7 L (10.7%)Rejected-Finance 2788 FOURTH FLOOR GALI RAJPUTANA ARYA PURA SABZI MANDI NEW DELHI KAMLA NAGAR NORTH DELHI DELHI 110007 UDYAM DL 01 0057966 | NORTH DELHI | DELHI | 110007 | L2 | Rejected-Finance Other than Lowest | |
| 3 | L3₹41.1 L+₹6.1 L (17.3%)Rejected-Finance | L3 | Rejected-Finance Other than Lowest | |
| 4 | L4₹41.3 L+₹6.3 L (18.0%)Rejected-Finance | L4 | Rejected-Finance Other than Lowest | |
| 5 | L5₹41.9 L+₹6.8 L (19.6%)Rejected-Finance 20 A 2ND FLOOR BLOCK C RAJEEV NAGAR BEGUMPUR DELHI 110086 | NORTH WEST | DELHI | 110086 | L5 | Rejected-Finance Other than Lowest |
Tender Value
Refer Docs
EMD Value
₹46.6 L
Closing Date
9 Feb 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NASIRABAD
Garrison Engineer, Military Engineer Services, Nasirabad, Pin - 305601
ADDN/ALTN AND SPL REPAIR TO BLDG NO 48 FOR OTM ACCN UNDER AGE BR-II AND PROVN OF APPROX 650 MTR DRAINAGE LINE AND OF 680 SQM PATHWAY IN FRONT OF BLDG NO EM 70, 71, 88, 94, 100, 313 AND EM-322 OF AD GP (SP) WKSP AT NASIRABAD MIL STN
2024_MES_638211_1
8406/E8
Open Tender
Civil Works
Item Rate
183 days
GE Nasirabad
MES Contractor enlisted as Class D and above and category a i having deposited Standing Security of Rs 1,00,000.00 with dept. Contractors not enlisted in MES should meet the MES enlistment criteria corresponding to appropriate class and category.
6 documents required · 6 mandatory
₹500
Yes
GE NASIRABAD
₹46.6 L
Yes
23 Feb 2024
19 Jan 2024
12 Feb 2024
19 Jan 2024
9 Feb 2024
2 Feb 2024
19 Jan 2024 - 2 Feb 2024
Amount
Taking down cement or cement lime plaster or stone / brick wall, ceiling including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.
M&L for rendering in cement mortar (1:6), 15mm thick on other than fair faces of brick work / stone masonary surfaces finished even and smooth without using extra cement, complete all as specified and directed.
M&L 15mm thick rendering in cement mortar (1:4) mixed with water proofing compound @ 3 % by weight of cement on other than fair faces of brick / stone masonary surfaces, finished even and smooth without using extra cement, complete all as specified and directed (NOTE:-WPC measured and paid separately).
M&L for rendering 5 mm thick in cement plaster 1:3 as in ceiling surfaces finished even and smooth (without using exta cement) complete all as specified & directed.
Dubbing out average 10mm thick in CM 1:4 on irregular faces of walls or concrete chajjas etc complete all as specified and directed.
M&L for preparation of newly plastered surface of wall and apply two coats of oil bound distemper over a coat of 1mm thick wall putty, complete all as specified and directed.
M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed
M&L for preparation and complete removing of exiting treatment of old plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed
M&L for preparation and complete removing of exiting treatment of old plastered surfaces of wall and applying three coats of white wash complete all as specified and directed
M & L preparation complete removing of exiting treatment of old decorated surfaces of walls and providing two coat of cement base paint complete all as specified and directed.
M&L for newly plastered surfaces two coats of cement base paint over one coat of cement based primer on plastered/concrete surfaces of walls incl preparation of surfaces complete all as specified and directed.
Dismantling floor, hearth or wall tiles, including cement mortar, removing serviceable tiles from site & rubbish off the premises, complete all as specified and directed.
M&L for machine cut kota sotne slab, 20-25mm thick over and including 20mm thick screed bedding in cement mortar 1:6 as in floors, laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing with mirror polish complete all as specified and directed.
M&L for machine cut kota sotne slab in skirting / steps / risers of reqd size, 20 to 25mm thick & including 15mm thick screed bedding in cement mortar 1:4 as in floors, laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing with mirror polish complete all as specified and directed.
M&L 25mm thick PCC (1:4:8) type D-2 using 40 mm graded stone aggregate, complete all as specified and directed.
Supply only water proofing compound ISI Marked complete all as specified and directed.
M&L for vitrified ceramic tiles light shade 8-10mm thick (square / rectangular ) polished, area of each tiles exc 0.18 Sqm but not exceeding 0.36 Sqm, in vertical surfaces of wall such as dados, skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed plaster 10mm thick in CM 1:4 complete all as specified and directed.
M&L for vitrified ceramic tiles light shade8-10mm thick (square / rectangular ) polished, area of each tiles exc 0.18 Sqm but not exceeding 0.36 Sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 15mm thick in CM 1:6 complete all as specified and directed.
M&L for glazed ceramic coloured tiles 7 to 8 mm thick in vertical surfaces area of each tile of exc. 0.11 Sqm and but not exc. 0.18 Sqm set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.11 Sqm but not exc 0.18 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bedding in cement mortar 1:6, complete all as specified and directed.
Excavation in trenches not exc 1.5m wide and n. exc 1.5m deep and getting out in soft loose soil complete all as specified and directed.
Returning and filling in approved earth including levelling spreading watering and well ramming in any layers n. exc 25cm thick complete all as specified and directed.
Removing of excavated soils n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and as directed by the Engineer-in-Charge.
Demolition or stone/brick work built in cement mortar including pillars,arches,quoins etc but excluding not ashlars facing etc complete all as specified and directed.
M & L for PCC (1:4:8) type D-2 using 40mm graded crushed stone aggregate as in foundation filling and mass concrete complete all as specified & directed.
M&L for brick work with fly ash old size bricks,straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.
M&L for brick work with fly ash old size bricks,straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed.
S&F in repair brass chromium plated shower rose of 125 mm size with swivel joints, incl . Fixing to steel pipe or union of 15mm bore complete all as specified and directed.
S&F in repair vitreous China "Orissa pattern" size 580 x 440mm" coloured, with intergral foot rests with vitreous china 'P' or 'S' trap front or back inlet including connection to trap and to flushing pipe, anti syphnage pipe and making good the floor to match the existing complete all as specified and directed.
S&F in repair PVC valve less, syphonic action type flushing cistern, 10 Litre capacity, low level, white with inlet, ball vlave float, handle including PVC rigid pipe 32mm bore as flush pipe fixed on walls by drilling holes and using PVC rawl plug of suitable size complete all as specified and directed.
S&F in repair PVC connection, heavy duty 15mm bore, 45cm long with 2 Nos PTMT nuts of approved quality complete all as specified and directed.
S&F inrepair Soap dish fancy type, fixed to plugs with chromium plated brass screws embedded in the wall complete all as sped & directed.
S&F in repair tubular towel rail brass chromium plated 20mm dia 'D' type 60cm long between flanges complete all as specified and directed.
S&F in repair 15mm bore stop valves (concealed) fancy type, chromium plated cast copper alloy,with long shank and cap (Concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions fixed complete all as specified and directed
S&F in repair fancy type angle valves 15mm bore , cast copper alloy chromium plated, screwed down high pressure screwed both ends for iron pipe or for unions and fixed etc complete all as specified and directed.
S&F in repairs fancy type Chromium plated bib taps, with capstan heads, screwed down for iron pipe or for brass ferrule & fixed for 15 mm bore pipe complete all as specified & directed.
Taking down old unserviceable 15mm GI tubing, fittings and connections and removing from site or keeping aside for refixing complete all as specified and directed.
Taking down old unserviceable 20mm GI tubing, fittings and connections and removing from site or keeping aside for refixing complete all as specified and directed.
S&F 15mm GI water tubing( Concealed type), medium grade, galvanised with all fittings ( and fixed to walls, ceiling or laid in floors/ trenches complete all as specified and directed.
S&F 20mm GI water tubing, medium grade, galvanised with all fittings ( and fixed to walls, ceiling or laid in floors/ trenches complete all as specified and directed.
S&F in repairs PVC (SWR) floor trap/ Nahani trap 75mm, plain with grating including jointing to waste pipe fixed in cement concrete type (1:2:4) complete all as specified and directed.
Taking down chowkhat or frames with shutter (without taking off shutter from the frame ) area n.exc 1.5 Sqm each complete with hold fasts etc and making good disturbed surface of walls in cement mortar (1:3) complete all as specified and directed
Taking down chowkhat or frames with shutter (without taking off shutter from the frame ) area exc 1.5 Sqm but n. exc 4.0 Sqm each complete with hold fasts etc and making good disturbed surfaces of wall in CM (1:3) complete all as specified and directed
S&F solid PVC moulded door frame of size 50mm x 47mm made out of 5mm prelam coloured PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with prelam sheet as reinforced with MS square tube and fixing in opening as specification & drawing complete all as specified and directed.
S&F factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick, (styles) with 2,4 or 6 raised panel design with 2mm thick moulded prelam (Nut Brown colour ) PVC sheet on the front face & 2mm prelam (Nut Brown colur ) PVC sheet on back face, and fixing inthe frame at site as per specification and drawing on page 161 of SSR (Part -II ) 2020 complete all as specified and directed.
S&F Pressed steel door frame of size 125 x 60mm for doors with one or more rebates incl necessary fixing lugs hinges, lock strike plate,hold fasts etc. including one shop coat of priming and filling PCC 1:3:6 type C1, complete all as specified & directed.
S & F second class HW Hollock/Bonsum/Sal 35mm thick, factory made, plain framed, paneled shutter (Two/Three panels) with panels of 9mm thick BWP grade ply wood bonded with high quality liquid phenol formal dehyde synthetic resin adhesive conforming to IS-710. The size of rails & style shall be as per IS-1003 (part-I) kiln seasoned as per IS-1141 & chemically pressure treated as per IS-401 complete all as per specified and directed.
S & F 35mm thick 2nd class HW glazed and skeleton shutters open rebated and prepared to receive glass/wire cloth gauge etc,(without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR part I, sectiion 8, clause 8.24(a) Member shall be kiln seasoned as per IS-1141 & chemically pressure treated as per IS-401 complete all as specified and directed.
S & F in repair of Aluminium Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg as per IS complete all as specified and directed.
S & F sheet glass 4mm thick ordinary quality and glazing with oil putty / beads / pin in square not exc 0.50 Sq.m in each pane, complete all as specified and directed.
S&F powder coated anodised aluminium shutter/frame for doors, partition wall, windows, ventilators with one or more rebates including joining cleat, glazing clips, rubber packing, anodised aluminium snap beading, screws, hinges and rubber packing and fixture for movement and fixing etc. complete all as specified etc. complete all as specified and directed
S & F 4.8mm thick tinted glass of any colour complete all as specified and directed.
S & F in repairs steel window/ventilator factory made, made out of MS hollow section 79mmx39mmx1.6mm thick frame with double shutters (Glazed & wire gauge shutters) made out of 'Z' section using flush butt welding & tenon riveting all as per IS 1038 / 83, dobby hinges shall be provided to both shutters. Locking arrangements as per sample approved by GE, provided with knob, 10mm MS square bars in grills, 'Z' section handle 100mm sized & 150mm long hook & eye welded to frame & shutter, four nos lugs welded to frame including necessary flat iron beading for securing wire gauge etc including holes, cutting holes for hold fasts and making good in PCC 1:2:4 type B-1 including preparation of surfaces & applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and directed. NOTE :- Wire mesh and sheet glass shall be measured & paid separately under respective items.
S & F in repairs 100 mm long door stopper of alumunium alloy body door stopper fixing on door, complete all as specified.
S & F 100mm size hasp and staple, aluminium anodised safety type, fixed with screws complete all as specified and directed.
S&F 300mm long alumimium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolt and sliding bolt of extruded section or cast aluminium alloy all as specified and directed.
S&F 150 mm long aluminium, anodised, barrel tower bolt of extruded section, ISI marked, complete all as specified and directed.
S & F 125mm single action spring hinges, mild steel with steel wire spring, stove enaelled black, ISI marked complete all as specified and directed.
S&F mild steel butt hinges, medium weight, cold rolled, ISI marked of size 100 mm including necessary welding work etc complete all as specified and directed.
S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or stainless steel wire staple complete all as specified and directed
M&L for preparing the new wooden surface of any description over 10 cm width or girth & applying two coats of synthetic enamel paint (1st grade) over one coat of pink primer complete all as specified & directed.
M&L for preparation of new steel surfaces of any description over 10 cm width or girth applying two coats of synthetic enamel paint (1st grade) over a coat of red oxide primer complete all as specified.
S & F in repairs 20mm dia MS chromium plated curtain rod tubular, fancy type, complete all as specified and directed.
S&F in MS chromium plated coated, decorative type knobs with bracket fixed at end of pelmet rod suitable for 25mm dia complete all as specified and directed.
Dismantling of exisiting unserviceable RCC/PVC water tank of Capacity not exceeding 500 litre each complete all as specified and directed
S&F 500 Litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I. complete all as spd & directed.
S&F 20mm ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe of 20mm dia and fixed (minimum weight 210 gms) complete all as specified and directed.
S&F in repairs 25 mm bore, gun metal globe or gate valve, wheel head cast copper alloy screwed down light pressure with crutch or butterfly handle screwed both ends for iron pipe or for union 25 mm dia, ISI marked complete all as spd & directed.
M&L 50 mm thick sand stone slabs; set and jointed over joists etc. in CM 1:4 as in base of water tank and 25mm thick PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate as in floor sub base, complete all as specified and directed.
Taking down existing unservicable treatment of any description including cement plaster/conctrete any thickness from roof surface cleaning of roof surfaces and preparing it for further treatment and removing rubbish from the site up to 02 KMs complete all as specified and directed.
For Non-Acessable Roof:- M&L for provn of water proofing roof treatment to RCC roof with APP modifed plain membrane, thickness of membrane not less than 3 mm and weighing not less than 3.6 kg/sqm comprising with following (a)The surface of roof, parapet and gutters, drain mouths, etc. over which waterproofing treatment is to be applied shall be cleaned of all foreign matter such as, fungus, moss, dust etc by wire brushing and dusting. For cast iron drain out lets a grove shall be cut around to tuck in the treatment. Concrete angle-fillets shall be provided at junctions between roofs and vertical faces of walls (parapet and other walls) around obstacles such as pipes. chimneystacks, etc. and other similar situation to ease up about corners.incl 10mm thick screed bed in CM 1:4 mix with and including water proofing compound under Bitumious based Primer conforming to IS: 3384 @ 0.3 Kg/SM to be applied on prepared surface, till the surface is properly impregnated. (c) After the application of approved bituminous primer the water proofing membrane shall be laid on the primed surface by torch application method as per manufacturer's instruction. The overlap while torching shall be 100mm in longitudinal direction and 100mm in transverse direction. All overlap joints shall be sealed thoroughly by thermo fusing both the membrane layer and seling it with the help of hot trowel. The overlap joints shall be made as a monolithic layer.
NOTE:- all for item no 72.00 above continue:- (d) All joints and changes in direction should be curved with cement mortar 1:3 mixed with SBR latex @ 200ml per bag of cement and cured well before laying the membrane. (e)A fillet of PCC (1:2:4) type B-0 of 100x100mm shall be provided at all junctions of vertical and horizontal surfaces and wherever there is a change of direction. The membrane should not be taken over at any steep turns and hence all corners/timers should be rounded. Apply two coats of bituminous aluminium paint over APP membrane @ 0.30 Kg/Sqm complete all as per manufacturers instructions. complete all as per manufacturers instructions, after as specified and directed.
M&L for coved fillet in PCC 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate at junction of roof & parapet wall and other vertical surfaces and surface painted with a hot paving bitumen grade 30/40 conforming to IS-73 @0.70 Kg/Sqm over a coat of bituminous primer conforming to IS-3384 @ 0.30 Ltr Sqm complete all as specified and directed
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan necks etc, including removal to store complete all as specified and directed.
S&F in repairs 110mm dia PVC rain water pipe fixed on wall under walls as spout incl. complete all as specified and directed.
S&F only stack clamp out of 50mm by 3mm flat iron and 16 mm dia round iron stays fixed to pipe of bore 100mm complete all as specified.
S & F in repair 110mm bore PVC (SWR) bends / shoe of any radius with oval access door, complete all as specified
Dismantling of ceiling board/lathing any thickness including frame work complete all as specified and directed.
Providing & Fixing false ceiling with Everest Fibre Cement Designer tile Ivory painted (High Pressure Steam Cured) of 4mm thickness (as per IS:14862) of size 595x595 mm and any one of the design (oceanic, lake & hill, cascade or electra) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and 15x32 mm made from 0.30 mm thick sheet, spaced at 1200 mm c/c and cross "T" of size 15x32 mm made of 0.30 mm sheet, 1200mm long spaced between main "T" at 600 mm c/c to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size15x32 mm made of 0.30 mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 15x20 mm made of 0.30 mm thick sheet and laying false ceiling tiles in the grid including , required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable rods of 3mm dia with galvanised Butterfly level clips, spaced at 1200 mm c/c along main T, bottom exposed width of 15mm of all T -sections shall be centra black pre-painted with polyester paint, and having a load bearing capacity of 12 kg/sqm,complete all as specified and as directed.
S&F 5-8mm thick PVC wall cladding hollow cored and a tongue and grooved edge fixed with screw incl required PVC cleat at edges and at corner coplete all as per manufacturer instruction and directed by Engr-in-Charge.
S & F rolled mild steel conforming to Fe-410W (Gde E 250 quality A) as in main and cross beams, hip and jack refters, purlins where connected to common rafters and running rails and guides for sliding doors,staging for tank fixed with angle cleats or other connecting plates and similar works and fixing complete all as specified & directed.
Dismantling plain or corrugated steel sheeting of any gauge any thickness complete all as specified & directed.
S&F 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugation side lap, fixed with coach screws and washers, in roofs walls etc with grade of zinc coating 275 complete all as specified & directed.
Dismantling timber scantlings 40 sq. cm and over in section, in any position complete all as specified and as directed.
M&L for chequered cement concrete tiles 30 x 30 cm x 22-25 mm thick polished/ reflective tiles,with grey cement and pigments as in floor set, jointed and pointed in neat cement slurry laid over and including 15mm thick cement screed base in CM 1:6 complete all as specified and directed.
M&L PCC 100mm thick (1:4:8) type D-2 using 40 mm graded stone aggregate as in subbase, complete all as specified and directed.
Surface dressing n.exc 15 cm deep in soft/loose soil complete all as specified and directed
M&L for factory made laying 60mm thick chamfered edge cement concrete paver block of M-35 grade conforming to IS 15658-2006 for in footparth, parks, lawns, drive ways or light traffic parking etc., & , made by table vibratory method using PU mould, laid in required colour & pattern, size and shape over and including 50mm thick bed of fine sand cushioning, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed
M&L for factory made laying 80mm thick chamfered edge cement concrete paver block of M-40 grade conforming to IS 15658-2006 for in footparth, parks, lawns, drive ways or light traffic parking etc., & , made by table vibratory method using PU mould, laid in required colour & pattern, size and shape over and including 50mm thick bed of fine sand cushioning, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed
M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in cill , steps, parapets and railing upto 60cm in height , coping, kneelers, apex stones, bed plates, and the like including weathering, slightly rounded or chamfered angles and throating as directed complete all as specified and directed.
M&L for PCC 1:2:4 type C-1, in kerb stone set in CM 1:6 complete all as specified and directed.
M & L for broken stone boulders Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
M & L for PCC (1:2:4) type C-1 using 20mm graded aggregate as in foundation bed concrete of drains, surface channels complete all as specified & directed.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/stopped ends etc complete all as specified and directed.
M&L for PCC (1:3:6) type C-1 using 20mm graded aggregate as in coping finished even and smooth without using extra cement etc complete all as specified & directed.
M & L for rendering 10mm thick in CM (1:4) on Brick masonry wall surfaces finished even and smooth without using extra cement complete all as specified and directed.
Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fittings such as switches, ceiling roses, holders, regulators, sockets etc., removing materials from site and making good disturbed surface of walls, floors etc complete all as specified and directed.
Disconnecting and taking down unserviceable sub main wiring of any size including steel/PVC conduit and accessories & removing from site and making good the disturbed surfaces, complete all as specified and directed.
M&L for point wiring with 1.5 Sqmm. (nominal area) single core PVC insulated 1100 Volts, grade multi stranded FRLS copper conductor unsheathed cable in and including PVC rigid non metallic conduit medium grade not less than 20mm dia ISI marked and fittings and accessories concealed in walls/roof/ ceiling with suitable size of sunk type pressed steel modular terminal box and modular white cover plate with frame for suitable module as per site requirements for mounting of modular switches, sockets, fan regulator etc and one green colour cable of 1.5 Sqmm. (nominal area) single core PVC insulated 1100 Volts, grade multi stranded FRLS copper conductor unsheathed as earth wire up to common earth and connected to earth for the following, complete all as specified and directed: for:-
All as per item No. 99.00 here-in-before but One light point controlled by one, one way switch.
All as per item No. 99.00 here-in-before but One ceiling fan/exhaust fan point controlled by one, one way switch.
All as per item No. 99.00 here-in-before but One three pin 5 Amp socket on same board with other switches.
All as per item No. 99.00 here-in-before but One 3 pin 5 Amp socket on independent board.
All as per item No. 99.04 here-in-before but with 2.5 Sqmm, for one 5 pin 5/15 Amp socket on independent board including 2.5 Sqmm stranded copper conductor (FRLS) PVC insulated green in colour as continous earth conductor connected to common earth complete all as specified and directed.
S&F of modular switch 1 way 6/10Amp , 1 module, complete all as specified and directed. Make: Havells/Finolex/L&T
S&F of modular switch 1 way 16Amp, 1 module, complete all as specified and directed. Make: Havells/Finolex/L&T
S&F of modular socket 6Amp, 2/3 pin combined 2 module complete all as specified and directed. Make: Havells/Finolex/L&T
S&F of modular socket 6Amp/16 Amp, 2/3 pin combined 2 module complete all as specified and directed. Make: Havells/Finolex/L&T
S&F ceiling rose surface bakelite 3 terminals 63.5 x 17 mm complete all as specified and directed.
Taking down existing exhaust fan & wall mounted fan and re use at site or carrying to the store (To be measured only when found serviceable in all respects complete for reuse.) complete all as specified and directed
S&F exhaust Fans AC single phase 230/240 volts of size 300 mm sweep with louver including making space/holes in wall/window for installation of exhaust fan connecting with three core flexible copper wire from ceiling rose to connector of fan complete all as specified and directed.
S&F of lamp holder PVC/polycarbonate type with back plate complete all as specified and directed. Make : Cona / SSK / Havells
Supply and fixing LED box type tube light fitting 20 watt made up of CRCA sheet with pre wired double sided connections including 1x20 watt retrofit LED tube rod with extruded aluminium body , PC diffuser and inbuilt driver , double sided connection, complete with all accessories internally prewired complete all as specified and directed.
Supply and fixing ceiling fan 1200 mm sweep , 230 Volts, AC , 50 Hz, copper winded motor, BE star rated white colour complete with motor, blade set of three nos , down rod, canopy, shackle assy complete all as specified and directed. .
S&F exhaust fans AC single phase 230V of size 300mm sweep PVC body with louver including connecting with three core flexible copper wire from ceiling rose to connector of fan including opening for exhaust fan and making good complete all as specified and directed. .
S&F LED light fittings, 10 W bulk head luminaries 230V, 50 Hz complete with all accessories and including connecting up with three core copper conductor cable with suitable size complete all as specified and directed. Make: Crompton Cat Part No. TIS-304-10-57-SL-DP-NWH or equivalent in Philips/Havells
S&F and testing energy saving street light luminaire 15 watt LED , pressure die cast housing with high power LED as lighting source and lens embedded PC cover with IP 66 protection incl connecting with three core copper flexible wire from ceiling rose to connector of light fitting complete all as specified and directed by Engr-in-Charge.
S&F in repair recess mounted 2' x 2' LED luminarie 36 watt, cool day/warm white light with white powder coated CRCA housing with LED driver, efficiencey >100 Lm/w complete all as specified and directed.
S&F of sub main wiring with two runs of single core PVC insulated and unsheathed multistranded (FRLS) copper conductor cable of size 6 Sqmm LT, 1100 volts grade, drawn through and including 25 mm dia or higher PVC non metallic concealed conduit with accessories such as socket, elbow, junction box, bell mouth, reducer, bend and flexible conduit etc. and fittings and one run of 6 sqmm single core multistranded copper conductor cable green colour as earth continuity conductor complete all as specified and directed.
S&F of MCB distribution board single pole & neutral with 200 Amps rated bus bar, double door IP-43 DB's , made out of sheet steel enclosure, recessed type, factory made powder coated 8 way, 240 volts suitable for housing MCB's including blanking plate complete all as specified and directed. Make: Legrand/Schneider/Seimens Note: MCB DB and MCB SP/SPN will be of same make.
S&F of MCB distribution board TPN 4 way, 415 volts, double door, with 200 Amps rated bus bar, neutral bar with shrouds, earth bar, IP-43 , made out of sheet steel enclosure, recessed type, factory made powder coated suitable for housing MCBs as incomer and outgoing complete all as specified and directed. Make: Legrand/Schneider/Seimens Note: MCB DB and MCB SP/SPN will be of same make.
S & F of MCB SP, 240 volt, 6 Amp to 40 Amp capacity, 10 KA, 'C' curve complete all as specified and directed. Make : Legrand (DX-3), Schneider (Acti-09), Siemens ( Betagard)
S & F of MCB SP, 240 volt, 63 Amp capacity, 10 KA, 'C' curve complete all as specified and directed. Make : Legrand (DX-3), Schneider (Acti-09), Siemens ( Betagard)
S & F of MCB SPN, 240 volt, 36 to 63 Amp capacity, 10 KA, 'C' curve complete all as specified and directed. Make : Legrand (DX-3), Schneider (Acti-09), Siemens ( Betagard)
S&F of MCB TPN, 415 volt, 63 Amp capacity,10 KA, 'C' curve complete all as specified and directed. Make : Legrand (DX-3), Schneider (Acti-09), Siemens ( Betagard)
Excavating in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. or for cable laying or not exceeding 10 sqm on plan and not exceeding 1.5 m in depth and getting out in soft/ loose soil complete all as specified and as directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in any type of soil complete all as specified and as directed.
Removing excavated material (soils) not exceeding 50 m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed.
Supply & spreading in trenches dry river sand cushioning to underground cable in trenches including spreading, levelling hand punning down complete all as specified and directed Note:- Depth of sand cushioning will be measured after punning down and levelling the sand properly complete all as specified and as directed.
M & L for laying of bricks locally available sub class 'B' bricks, non-modular sizes as per IS 1077: 1992 for cable protection cover laid flat and dry in trenches over the cable perpendicular to the direction of cable complete all as specified and directed.
Supply and laying including jointing, testing or fixing or passing through pipe, trench or duct commissioning and testing XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 volt grade size 16 sqmm, 4 core complete all as specified and directed by Engineer-in-Charge.
Supply and fixing tubes light grade GI tubing 50 mm dia with all fitting laid in trenches, fixed on pole/on wall for cable protection complete all as specified and directed.
M&L for earthing complete with galvanised steel earth plate electrode 60cmx60cmx6 mm thick buried directly in ground vertically to a depth not less than 2.25m below ground level with top edge of the earth plate at a depth not less than 1.5m below ground level, connected to galvanised earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel and other end of earth wire connected to main switch board and protected by galvanised iron pipe light grade 15mm bore and water pipe 20 mm bore GI med grade with funnel and wire mesh PCC chamber in cement concrete 1:3:6 type C-2 and RCC cover with handle all as specified and shown in elect plate No 3 of SSR Part-I of 2009 incl dismantling of old unsv existing earthing .
M/s AKASH CONSTRUCTION CO.
ANAM BUILDCON
M/S AL ASMA ENTERPRISES
Shree Sai Ram Enterprises
V K LAKWAL CONSTRUCTION
M/S Nexus Projects
M/s Jai Jinendra Constructions
TANISHQ ENTERPRISES
TARA CHAND JI GOMA CONSTRUCTIONS CO.
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .