Special repair to Bldg No. T-188 and certain minor work under AGE B/R Beas under GE Kapurthala

Amount

Excavation over areas in any type of soil, not exceeding 1.5 m deep and getting out complete all as specified and as directed.

Excavation over areas in any type of soil, exceeding 1.5 m deep and not exceeding 3.0 m deep and getting out complete all as specified and as directed.

Excavation over areas in any type of soil, exceeding 3.0 m deep and not exceeding 4.5 m deep and getting out complete all as specified and as directed.

Excavation over areas in any type of soil, exceeding 4.5 m deep and not exceeding 6.0 m deep and getting out complete all as specified and as directed.

Returning filling in incl spreding levelling watering and well ramming in layers not exceeding 25 cm each layer complete all as specified and as directed.

Removing excavated material (soil) not exceeding 50 mtr and depositing where directed at a level not exceeding 1.50 mtr above the starting point complete all as specified and as directed.

Rough excavation in any type of soil, not exceeding 1.5 m deep and getting out complete all as specified and as directed.

Removing excavated material (soil) exceeding 1.5 Km but not exceeding 5.0 Km and depositing where directed complete all as specified and as directed.

Forming embankments including raising (or lowering) earth, spreading in layers not exceeding 30 cm thick, watering, ramming/rolling and finishing to required size, shape, etc, not exceedubg 1.5 m high from base, complete all as specified and as directed. Note : Earth for embankments shall be brought from outside MoD land.

Forming embankments including raising (or lowering) earth, spreading in layers not exceeding 30 cm thick, watering, ramming/rolling and finishing to required size, shape, etc, exceeding 1.5 m high from the base but not exceeding 3.0 m high, complete all as specified and directed. Note : Earth for embankments shall be brought from outside MoD land.

Forming embankments including raising (or lowering) earth, spreading in layers not exceeing 30 cm thick, watering, ramming/rolling and finishing to required size, shape, etc, exceeding 3.0 m high from the base but not exceeding 4.5 m high, complete all as specified and directed. Note : Earth for embankments shall be brought from outside MoD land.

Forming embankments including raising (or lowering) earth, spreading in layers not exceeding 30 cm thick, watering, ramming/rolling and finishing to required size, shape, etc, exceeding 4.5 m high from the base but not exceeding 6.0 m high, complete all as specified and directed. Note : Earth for embankments shall be brought from outside MoD land.

M&L for Reinforced concrete pipes of 450mm internal dia, class NP-2, laid in trenches and jointed complete with collar complete all as specified and directed.

M&L for Reinforced concrete pipes (except RCC pipe) for 450mm internal dia, class NP-2, laid in trenches and jointed complete with collar complete all as specified and as directed.

Demolition of brickwork/stone masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed.

M&L for Brickwork with sub class ‘B’ (old size) bricks, straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:4 complete all as specified and as directed.

M&L for Brickwork with sub class ‘B’ (old size) bricks, straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 complete all as specified and as directed.

Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for rendering 15mm thick in cement mortar 1:4 using water proofing compound on brick work or concrete surfaces of wall, surfaces finished even and fair using extra cement complete all as specified and directed. Note : WPC shall be measured and paid separately.

M&L for rendering 10mm thick in cement mortar 1:6 on brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 10mm thick in cement and sand mortar 1:3 on concrete surfaces of ceiling/Top and sides of chajjas/facia of roof projection including necessary formwork including finishing the surface even and smooth without using extra cement complete all as specified and as directed.

Supply only water proofing compound complete all as specified and as directed.

Supply only liquid water proofing compound complete all as specified and as directed.

M&L for preparation of newly plastered surface of walls and applying three coats of white wash complete all as specified and as directed.

M&L for preparation of newly plastered surface of ceiling and applying three coats of white wash complete all as specified and as directed.

M&L for preparation of newly plastered surface of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed.

M&L for preparation of newly plastered surface of walls and applying two coats of cement base paint complete all as specified and as directed.

M&L for preparation of newly plastered surface of walls and applying two coats of Acrylic Emulsion over a coat of alkali resistant primer complete all as specified and as directed.

M&L for complete removal of existing treatment of any description on walls, complete all as specified and as directed.

M&L for applying one coat of wall care putty 2mm thick complete all as specified and as directed.

M&L for preparation of existing surfaces incl washing, rubbing down and scrapping of old painted surfaces of walls and applying two coats of white wash complete all as specified and as directed.

M&L for preparation of existing surfaces incl washing, rubbing down and scraping of old painted surfaces of ceiling and applying two coats of white wash complete all as specified and as directed.

M&L for preparation of existing surfaces including washing, rubbing down and scraping of old distempered and painted surface of walls and applying two coats of Oil Bound Distemper complete all as specified and as directed.

M&L for preparation of existing surfaces incl washing, rubbing down and scraping of old painted surface of walls and applying two coat of cement base paint complete all as specified and as directed.

M&L for preparation of existing surfaces incl washing, rubbing down and scraping of old painted surface of walls and applying two coat of Acrylic Emulsion paint over a coat of appropriate primer complete all as specified and as directed.

M&L for painting to old painted surfaces of wood or wood based surfaces of any description not otherwise described over 10cm in width or girth including preparation of surfaces, with two coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old painted steel surfaces of any description exceeding 10 cm width or girth and painting with two coat of synthetic enamel paint complete all as specified and directed.

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L for plain cement concrete Type B-1, 1:2:4 (20 mm graded crushed stone aggregate) as in copings, benching, haunching, bond stones bed and the like including use of necessary form work complete all as specified and as directed.

M&L for plain cement concrete Type D-2, 1:4:8 (40 mm graded crushed stone aggregate) as in sub base for pavement, path etc, complete all as specified and as directed.

M&L for 75mm thick PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in plinth protection and similar works including finishing the surface of concrete topping even & fair, without using extra cement complete all as specified and as directed.

M&L for 100mm thick PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in flooring including finishing the top surface even & smooth, without using extra cement complete all as specified and as directed.

M&L for Non - skid coloured Ceramic Joint free exterior grade tile 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15mm thick screed bed in cement and sand mortar 1:4 complete all as specified and as directed.

M&L for 25 mm thick PCC 1:2:4 type B-1, using 20 mm graded stone aggregate, including finishing surface of concrete topping even and rough complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off premises complete all as specified and as directed.

M&L for non - skid coloured Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15mm thick screed bed in cement mortar 1:4, complete all as specified and as directed.

M&L for Non - skid Ceramic joint free tiles 7 to 8 mm thick coloured/wooden finish (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15mm thick screed bed in cement mortar 1:4, complete all as specified and as directed.

M&L for Non - skid ceramic joint free tiles 7 to 8mm thick coloured/wooden finish (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 10mm thick plaster in cement mortar 1:4 complete all as specified and as directed.

M&L for glazed coloured ceramic tile of size 450 x 300 x 7mm thick on vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10mm thick plaster in cement mortar 1:4 complete all as specified and as directed.

M&L for 18mm thick Zed Black Granite machine cut in any position bull nosed on front face, laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over and including 20mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

M&L for Virified Ceramic tiles 10mm thick (square/rectangular) polished, area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm as in floors etc over and including 150m thick screed bed in cement and sand mortar 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and as directed.

M&L for Virified Ceramic tiles 10mm thick (square/rectangular) polished, area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm as in skirting/dado etc over and including 10mm thick plaster in cement and sand mortar 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and as directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of area not exceeding 1.5 Sqm each and removing from site complete all as specified and as directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of area exceeding 1.5 sqm and not exceeding 4.00 sqm each and removing from site complete all as specified and as directed.

Taking down shutters of any description, area not exceeding 1.00sqm each, complete all as specified and as directed.

Taking down shutters of any description, area exceeding 1.00 sqm but not exceeding 2.00 sqm each complete all as specified and as directed.

S&F for pressed steel frames of size 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, lock strike plate, including filling with PCC 1:3:6 type C-1 using 12.5mm graded stone aggregate as in frames/hold fast blocks complete all as specified and as directed.

S&F for Pressed steel frames of size 125 x 60 mm for doors with one or more rebates incl necessary fixing lugs, lock strike plate, including filling of PCC 1:3:6 type C-1 using 12.5mm graded stone aggregate as in frames/hold fast blocks complete all as specified and directed.

S&F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, suppling & fixing in opening as per specification, complete all as specified and directed.

S&F for Factory made solid panel PVC door shutter 30 mm thick both side prelaminated with wood grain/coloured (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of same colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and directed.

S&F for 30 mm thick Factory made Glazed and skeleton shutters made up of 2nd class hardwood, open rebated and prepared to receive glass, gauze, etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc sizes of members as specified supplied and fitted to chowkats complete all as specified and directed.

S&F for 35mm thick Factory made Plain framed, panelled shutter (two panel) made up of 2nd class hardwood with lock rail and panel of 9 mm commercial ply with commercial veneering on both faces. The size of rail and stile as per specification, kiln seasoned and chemically pressure treated, sizes of members as specified supplied and fitted to chowkats complete all as specified and as directed.

S&F for Steel windows/ventilators box type comprised of tubular frame and shutters made out of 1.25mm thick M S sheet tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire cloth and glass panes shall be measured and paid separately) with side hung shutters with steel handle and steel peg stay dovetailed or welded including 2 Nos tower bolts 150mm long for each leaf and 10mm square bar grills at spacing 150 mm c/c fixed in frame work, including other fittings, hinges, handles, tarred hold fasts, PCC blocks etc complete all as specified and as directed.

S&F for powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc with a minimum size of 101x45mm to carry laod of Aluminium Door/ windows fixed complete all as specified and as directed.

S&F for powder coated anodised aluminium door shutters, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges and tower bolt as reqd, anodised aluminum snap beading screws etc prepared to receive glass, gauze, etc. (without sash bars), and fitted to chowkats complete all as specified and as directed. (Note : Glass and wire gauge will be measured and paid separately).

S&F for powder coated anodised aluminium window/ventilator, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges and tower bolt as reqd, anodised aluminum snap beading screws etc prepared to receive glass, gauze, etc. (without sash bars), and fitted to chowkats complete all as specified and directed. (Note : Glass and wire gauge will be measured and paid separately).

S&F PVC Solid frame fixed in Cupboard with x-sectional area of frame between 8Sqcm to 15Sqcm complete all as specified and as directed.

S&F factory made 18mm (+ 0.7mm) thick PVC sheet one side preleam sheet for cupboard shutter and finish at all edges complete all as specified and as directed.

S&F factory made 12mm (+ 0.7mm) thick PVC sheet one side preleam sheet for cupboard shutter and finish at all edges complete all as specified and as directed.

S&F continous (Piano) type hinges mild steel bright finish or electro galvanised with wide of flaps 30mm complete all as specified and as directed.

S&F for Stainless steel butt hinges of size 100mm long medium weight complete all as specified and as directed.

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolt in 300mm. Complete all as specified and directed.

S&F for 200mm long, aluminium anodised, barrel tower bolts, of extruded section complete all as specified and directed.

S&F for 150mm long, aluminium anodised, barrel tower bolts, of extruded section complete all as specified and directed.

S&F for Aluminium handles cast type anodised of size 150mm long complete all as specified and directed.

S&F for Aluminium handles cast type anodised of size 75mm long complete all as specified and directed.

S&F for 300mm size mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F for Ball catcher with proper magnetic effect fixed with shutter complete all as specified and directed.

S&F for Hasp and staple of size 100 mm, safety type, aluminium anodised with hinge pin including bolt to hinge plate and fixed with screw complete all as specified and directed.

S&F for Stainless steel tray for keeping cutlery items fixed in PVC kitchen cabinet area less than 0.15 Sqm with a height 0.20m complete all as specified and directed.

S&F for Stainless steel tray for keeping dining plates fixed in PVC kitchen cabinet area less than 0.15 Sqm with a height 0.40m complete all as specified and directed.

S&F for Stainless steel tray for keeping kitchen utensils fixed in PVC kitchen cabinet area less than 0.15 Sqm with a height 0.40m complete all as specified and directed.

S&F for Kitchen cabinet drawer slider made up of steel fixed in PVC cabinet with necessary arrangement for sliding of drawer complete all as specified and directed.

S&F for 20 mm bore stainless steel curtain rod with 1mm thick wall thickness and each length not more than 1.5 Metre including a pair of brackets and knobs with each length/piece, fixed on doors and windows opening for hanging curtains complete all as specified and directed.

S&F for galvanized mild steel wire-cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples S&F for 20 mm bore stainless steel curtain rod with 1mm thick wall thickness and each length not more than 1.5 Metre including a pair of brackets and knobs with each length/piece, fixed on doors and windows opening for hanging curtains complete all as specified and directed.

All as per item No 86 above but fixed in repair complete all as specified and as directed.

M&L for preparation of new wooden surfaces of any description not otherwise described over 10 cm in width or girth including preparation of surfaces and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.

M&L for preparation of new or previously untreated steel surfaces of any description over 10cm in width or girth and priming with red oxide primer and painting with two coats of synthetic enamel paint complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new ones glazed with oil putty fixed with beads or in wooden shutters complete all as specified and directed.

S&F for 3.0mm thick sheet glass, ordinary quality and glazing with fixing arrangement in square/ rectangular shape not exceeding 0.5 square metre in each pane complete all as specified and directed.

S&F for 4.8 mm thick sheet glass, ordinary quality and glazing with fixing arrangement in square/rectangular shape not exceeding 0.5 square metre in each pane complete all as specified and directed.

S&F rotational moulded polythelene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position as per SSR Part-1 of 1000 ltrs capacity including fittings complete all as specified and directed.

S&F for 20mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed (Minimum weight : 25mm-455gms) for 20mm bore fixed complete all as specified and as directed.

Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

S&F for 15mm bore steel water tubing medium grade, galvanised, including short lengths, fixed to wall/concealed in wall/ceiling or laid in floor complete with all fittings such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc complete all as specified and as directed.

S&F for 20mm bore steel water tubing medium grade, galvanised, including short lengths, fixed to wall/concealed in wall/ceiling or laid in floor complete with all fittings such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc complete all as specified and as directed.

S&F in repair for Vitreous China squatting pan “Orissa pattern” size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe) with CI ‘P’ trap of long arm of suitable size including connection to flush pipe, anti symphonic pipes complete all as specified and as directed.

S&F in repair for Vitreous China wash down water closet pan size 580x440mm coloured with pedestal pan and trap, including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc complete all as specified and as directed.

S&F for Plastic water closet seat cover, closed pattern with flat bottom, mild steel chromium plated or aluminised hinging device (colour of cover should match with water closet) complete all as specified and as directed.

S&F in repair PVC low level flushing cistern, valveless, syphonic action type of 10 litres capacity with inlet, ball valve float and handle including brackets & PVC bend pipe 60/90cm long etc, supplied and fixed complete all as specified and as directed.

S&F in repair Vitreous China Wash Basin with full pedestal, white, flat back, size 550x400mm including brackets, cutting and pinning in ends of brackets or eracting stand & waste pipe, coupling etc, complete all as specified and as directed.

S&F for 15mm bore Brass CP mixer for mixing hot & cold water in wash hand basin screwed down for iron pipe and fixed complete all as specified and as directed.

S&F in repair 15mm bore CP Bib taps fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F in repair 15mm bore CP Stop valve/Angle valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F in repair 15mm bore fancy type, chromium plated Stop valve with long shank and cup (concealed type), cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F 20mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

S&F for Stainless steel gratings of 75mm bore size fixed with cement motar complete all as specified and as directed.

S&F PVC connection 15mm size of length 450mm with PTMT nuts supplied and fixed complete all as specified and as directed.

S&F for CP Brass Tubular towel rail 20mm dia D-type 60 cm long between flanges, including brackets and fixed to walls complete all as specified and as directed.

S&F for Soap dish of Stainless steel of size 160x 160x90mm complete all as specified and as directed.

S&F for Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.

S&F in repairs shower rose 100mm with CP arm of chromium plated any colour or fixing with 15mm pipe (minimum weight 40gm) complete all as specified and directed.

S&F for jet spray for EWC including required length of tube fixed with water tubing/stop cock including necessary fittings complete all as specified and directed.

S&F for Hand Shower for EWC with 1.5m length of tube fixed with water tubing/stop cock including necessary fittings complete all as specified and directed.

S&F for 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed in trenches/floors/walls complete all as specified and as directed.

All as per item No 118 above but for 110mm bore complete all as specified and as directed.

S&F for 75mm bore PVC (SWR) bend, plain including jointing with solvent cement complete all as specified and as directed.

All as per Srl Item 120 above but 110mm bore of pipe.

S&F for PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75mm bore in repairs, complete all as specified and as directed.

S&F 110mm bore PVC (SWR) junction equal or unequal complete all as specified and as directed.

S&F 110mm PVC (SWR) branch piece, equal or unequal complete all as specified and as directed.

S&F PVC (SWR) vent cowl of 75mm dia complete all as specified and as directed.

S&F for sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

M&L for providing cement concrete Type B-1, 1:2:4 (20 mm graded crushed stone aggregate) as in landings, cover slabs upon drainage system including necessary form work etc complete all as specified and as directed.

Cutting chases, pinning in brick walls making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting exceeding 10 cm but not exceeding 20 cm girth complete all as specified and as directed.

S&F for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for screed bed or bedding layer of mortar 20mm thick for laying floor finishes in cement mortar 1:4 complete all as specified and as directed.

M&L for chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors/path with grey cement and pigment to match the shade of tile complete all as specified and as directed.

S&F for superior Quality PVC Hollow wall and roof panelling of approved pattern, 250mm wide and 4mm thick with interlocking arrangement fixed to wall with PVC rawl plugs and steel screws vertically including necessary drilling holes, PVC casing and caping for top bottom and corner portion where required for stability of panelling complete all as specified and as directed.

Dismantling of plain or corrugated asbestos cement sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.

M&L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of approved colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws etc complete all as specified and as directed.

M&L for Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of approved colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws etc complete all as specified and as directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/ slabs/blankets, any thickness, including cover fillets complete all as specified and as directed.

S&F false ceiling of 9.5mm thick gypsum tiles (600x600mm) laminated with PVC film on the face side & metalised polyester film on the back side with all four edges sealed with PVC film (shade either plain white or crack) including GI Frame work using T grid/Cross-T/Wall angle/level clip & suspenders of standard galvanised sections in a grid size of 600x600mm complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not other wise provided for complete all as specified and as directed.

S&F for steel work in tubular trusses/ purlins incl special shaped washer etc, complete all as specified and as directed.

S&F for steel work in tubular trusses/ purlins incl special shaped washer etc, complete using running welded, but fixing only complete all as specified and as directed.

S&F for steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and as directed.

S&F for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing complete all as specified and as directed.

S&F for horizontal blinds for windows area not exceeding 3.0 Sqm in each opening including fixing arrangement for up and down with wires complete all as specified and as directed. Note : Colour of blinds shall be as approved by the user unit.

Taking down carefully aluminium / copper point wiring (light, fan, socket, powerpoint) including batten, conduit and fittings such as switches, ceiling rose, sockets, brackets, light fittings, switch board etc, making good distrubed surfaces of wall, floar, ceiling etc complete all as specified and as directed.

M&L for point wiring for one light / fan / bell point with 1.5 sqmm cable PVC unsheathed and insulated copper multistranded conductor ( FRLS ) 1100 Volts grade cable ( red colour cable to be used for live connection and black colour cable to be used for neutral connection ) controlled by one way switch drown through and including PVC concealed conduit with all accessories including 1.5 sqmm copper multistrand conductor (FRLS ) 1100 Volts grade unsheathed PVC insulated ( green colour ) continuity earth wire connected to common earth dolly and sunk cast pressed steel Metal flush mounting box for mounting of fittings like switch, socket and fan regulator and cover plat of suitable modules capacity and make of swich socket complete all as specified and as directed by Engr-in-Charge :-

One light point controlled by one, one way switch complete all as specified and as directed.

One fan point controlled by one, one way switch complete all as specified and as directed.

One socket outlet 3 Pin, 5 Amp on independent board complete all as specified and as directed.

One socket outlet 3 Pin, 5 Amp on same board complete all as specified and as directed.

One bell point controlled by one bell push complete all as specified and as directed.

All as per item No 146 here in before but 2.5 Sqmm P.V.C insulated unsheathed cable with stranded copper conductor for 6 pin 6/16 Amp switch socket combination on independent board complete all as specified and as directed.

S&F in repair Modular switch 6 Amp 250 V AC one way one module complete all as specified and as directed.

S&F in repair Modular switch 16 Amp 250 V AC one way with indicator one module complete all as specified and as directed.

S&F in repair Modular Socket, 6A - 2/3 pin combined 2 module complete all as specified and as directed.

S&F in repair Modular Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and as directed.

M&L for ceiling rose, surface Bakelite 65 x 17.50 mm of three terminals PVC/Polycarbonate,isolated body (ISI Marked) complete all as specified and as directed.

S&F in repair modular Fan regulator step type, 120W - 2 module complete all as specified and as directed.

S&F in repair Modular Bell push 6 amp 1 module (ISI Marked) complete all as specified and as directed.

S&F in repair Buzzer/Ding Dong, A C , 230 volt single pole (ISI Marked) complete all as specified and as directed.

S&F in repair Metal flush mounting box of 1/2 Module complete all as specified and as directed.

S&F in repair Metal flush mounting box of 3 Module complete all as specified and as directed.

S&F in repair Metal flush mounting box of 4 Module complete all as specified and as directed.

S&F in repair Metal flush mounting box of 6 Module complete all as specified and as directed.

S&F in repair Metal flush mounting box of 8 Module complete all as specified and as directed.

S&F in repair Metal flush mounting box of 12 Module complete all as specified and as directed.

S&F Metal in repair White cover plate with frame, 1 module complete all as specified and as directed.

S&F Metal in repair White cover plate with frame, 2 module complete all as specified and as directed.

S&F Metal in repair White cover plate with frame, 3 module complete all as specified and as directed.

S&F Metal in repair White cover plate with frame, 4 module complete all as specified and as directed.

S&F Metal in repair White cover plate with frame, 6 module complete all as specified and as directed.

S&F Metal in repair White cover plate with frame, 8 module complete all as specified and as directed.

S&F Metal in repair White cover plate with frame, 12 module complete all as specified and as directed.

S&F in repair PVC/Polycarbonate Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings type with back plate suitable for batten fittings complete all as specified and as directed.

S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and as directed.

Taking doun old unsv sub main and M&L for sub main wiring with two runs of single core PVC insulated, unsheathed copper condutor, multi stranded cable of size 4.00 Sqmm 1100 volts grade drawn PVC concealed conduit of size 19/20 mm (ISI marked) including PVC accessories complete including cutting and chasing and making good etc including one run of 4.00 Sqmm single core copper conductor multi-stranded PVC insulated, unsheathed cable as earth wire continuity conductor complete all as specified and directed. Note : Two run of 4.00 Sqmm cable one run of 2.5 Sqmm cable as earth continuity conductor and one run of PVC Conduit shall be measured & paid as one unit.

Taking doun old unsv sub main and M&L for sub main wiring with two runs of single core PVC insulated, unsheathed copper condutor, multi stranded cable of size 6.00 Sqmm 1100 volts grade drawn PVC concealed conduit of size 19/20 mm (ISI marked) including PVC accessories complete incl cutting and chasing and making good etc including one run of 6.00 Sqmm single core copper conductor multi-stranded PVC insulated, unsheathed cable as earth wire continuity conductor complete all as specified and directed. Note : Two run of 6.00 Sqmm cable one run of 6.00 Sqmm cable as earth continuity conductor and one run of PVC Conduit shall be measured & paid as one unit.

Supply, installation, testing and commissioning of 20 watt 4 ft long LED Batten housing made of extruded alluminium with milky white diffuser and inbuilt electronic driver system lumen output should be at least 1800 lumen with a CCT of 6000 K, power factor should be greater than 0.9 with all accessories and connecting up complete with 3 core flexible cable white of size 23/0.0076 complete all as specified and as directed.

S&F in repair LED Security light fitting 35 watt Pressure die cast aluminium housing, heat resistant toughened glass with frame IP 66 Protection complete fitting including 1.5 mtr long 40/50 mm (Suitable size for fixing of LED light fitting) bore GI pipe mounting bracket/Clamp made to shape for fixing on pole with 40 mm x 6 mm flat iron clamp 02 numbers with 16 mm dia bolts, nuts and washers all as specified and directed. Note : Contractor shall provide 2 years written manufactures warranty for the LED fixture complete including driver from the certified date of completion.

S&F in repair LED Bulk head fitting 10 watt highly cost effective compact, ultra low energy, modern design utility bulkhead suitable for indoor and outdoor applications with IP 65 protection watt complete with all accessories and connecting up complete with 3 core flexible cable white of size 23/0.0076 complete all as specified and as directed.

S&F in Repair sheet metal enclosure for MCB DB double door single pole & Neutral 8 way with 200 Amps rated bus bar complete all as specified and as directed.

Taking down old unsv MCB and S&F SP 6 To 32 AMP amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of current carrying capacity in the MCB DB complete with connection testing and commissioning all as specified and directed.

All as per item No 178 above but SPN 32 AMP all as specified and directed.

S&F ceiling fans, complete with three blade, down rod, accessories 230V, 1400mm sweep, with Squirrel cage induction motor all as specified and directed.

S&F water heater storage type electric, capacity 25 litres BEE 5 star BEE rating AC 230 volts, 50 Hz vertical type including material and labour for grouting four Nos rack bolt for holding of water heater on wall including making good and match existing surfaces all as specified and directed.

S&F PVC connection cold water pipe 18" long, 15mm dia with brass jem nut and wahser, both side all as specified and directed.

All as per ser item No 182 here in before but hot water pipe made of chromium plated brass flexible tubing all as specified and directed.

S&F exhaust fan, made of sturdy engineering plastic AC single Phase. 230V of size 300 mm sweep with, blades, and frame and louvers cutting of the holes in existing wall and making good the surfaces all as specified and directed.

S&F exhaust fan, steel body AC single Phase. 230V of size 300 mm sweep with, blades, and frame and louvers cutting of the holes in existing wall and making good the surfaces all as specified and directed.

M&L for 40mm bore GI Pipe 'light grade' galvanized with all fittings laid in trenches/on pole/road crossing all as specified and directed.

Supplying, laying, jointing and testing under ground XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 vols grade cross sectional area 50 Sqmm 3.5 core laid in trences, in floor, in duct, through pipes or along the pole including taking down old one all as specified and directed.

Excavation in trenches in soft/loose soil not exceeding 1.50 mtr wide and not exceeding 1.50 mtr in depth for foundation of poles/ stays/ laying of cables etc and getting out including trimming of sides of trenches all as specified and directed.

Removing of surplus excavated soil to a distance not exceeding 50mtr away and depositing where directed at a level not exceeding 1.5 mtr above the starting point all as specified and directed.

Material and labour for sand cushioning to under ground cable with a layer of sand 8 cm thick before laying of cable and 15 cm thick after laying of cable all as specified and directed. Note : For payment purposes 18cm thickness shall be considered.

Material and labour for brick protection using old size sub class ‘B’ bricks, laid flat, dry adjacent to each other laid length wise perpendicular to the axis of cable all as specified and directed.

S&F round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size all as specified and directed.

M&L for Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick surrounded with charcoal and salt, buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical Plate No 3 of MES SSR Part-I connected to main switch board or main control board all as specified and testing on completion including provision of earth wire protected by galvanized iron 15 mm dia light grade pipe and watering pipe shall be 20 mm bore light grade including all excavation and earth work in any type of soil, PCC pit with pre-cast RCC cover, charcoal/salt, funnel etc all as specified and directed.