Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.0 LAccepted-AOC | L1 | Accepted-AOC Accepted | |
| 2 | L2₹32.8 L+₹5.0 L (18.2%)Rejected-AOC | L2 | Rejected-AOC Rejected |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
1 Apr 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer(N) Mamun
Garrison Engineer(N) Mamun PIN-145001
REPAIR/ MAINT OF WATER SUPLLY LINE INCLUDING RAISING MAINS, DELIVERY LINE, VALVES CUM VALVE CHAMBER INCLUDING REPAIR/MAINT OF PUMP, STARTER, SUBMERSIBLE/CENTRIFUGAL/VT PUMP SETS AND CONNECTED WORKS IN AOR UNDER AGE E/M -II OF GE(N) MAMUN
2023_MES_584465_1
GE(N)/M-64/2022-23
Open Tender
Civil Works
Item Rate
180 days
Garrison Engineer(N) Mamun
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
Garrison Engineer(N) Mamun
₹60,000
26 Apr 2023
6 Mar 2023
3 Apr 2023
6 Mar 2023
1 Apr 2023
19 Mar 2023
Amount
Excavation in trenches n.exc 1.5M wide and n.exc 1.5M deep in any type of soil and getting out for laying of pipes all complete all as specified and directed.
Returning, filling in trenches including , spreading, levelling, watering and well ramming in layers n.exc 25cm thick complete all as specified and directed.
Removal of surplus soil to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.
Taking out CI/DI/MS pipe 200 mm bore including fittings, control valves from the trenches/on pillars or in any condition complete all as specified and directed. (Excavation and earth work shall be measured and paid for separately).
All as per Srl item No 04 but size of pipe 150mm bore.
All as per Srl item No 04 but size of pipe 100 mm bore
Taking out existing unserviceable/serviceable GI Pipe 100mm bore from the trenches including disconnecting branch connections, fittings and control valves complete all as specified and directed. (Excavation and earth work shall be measured and paid for separately).
All as per srl item No 07 but 80 mm bore
All as per srl item No 07 but 50 mm bore
All as per srl item No 07 but 40 mm bore
All as per srl item No 07 but 25mm bore
All as per srl item No 07 but 20mm bore
All as per srl item No 07 but 15 mm bore
Re-laying in trenches cast iron pipe 200 mm bore with socket and spigot ends complete with all fittings after cleaning throughly and removal of all blockages by using splitted bamboos/steel rod effectively including complete jointing materials all specified and directed .
All as per Srl item No 14 but 150mm bore
All as per srl item No 14 but 100mm bore
Re-laying only old serviceable GI Pipe 100mm bore obtained from srl no 7 above including S&F all GI fittings as per site requirement complete all as specified and directed.
All as per Srl item No 17 but 80 mm bore
All as per Srl item No 17 but 50 mm bore
All as per Srl item No 17 but 40 mm bore
All as per Srl item No 17 but 25 mm bore
All as per Srl item No 17 but 20 mm bore
All as per Srl item No 17 but 15 mm bore
Supply and laying in trenches or on pillars DI pipe 200 mm bore centrifuglly cast class K7 including tyton joints in any length laid in trenches complete all as specified and as directed (Excavation/earth work if required, joints fittings shall be measured and paid for separately). (Make :- Electrosteel/ Rashmi/TATA)
All as per Srl item No 24 but 150 mm bore.
All as per Srl item No 24 but 100 mm bore .
Supply and laying in trenches/on piller GI Pipe 100 mm bore medium grade ISI marked including all fitting laid in trenches/pillar/on wall complete as per site requirement complete. (Make: Jindal/Parkash Surya/Oswal)
All as per Srl item No 27 but 80 mm bore
All as per Srl item No 27 but 50 mm bore
All as per Srl item No 27 but 40 mm bore
All as per Srl item No 27 but 25 mm bore
All as per Srl item No 27 but 20mm bore
All as per Srl item No 27 but 15 mm bore
M&L in replacement of GI fittings of Tee, elbow, plug, bend, reducer socket and union socket or nipple socket etc of size from 15 mm to 80 mm bore complete all as specified and directed.
S&F DI/CI fittings such as bends, tees, tapers, tailpieces, flanges, collars etc of any size and shape as per site requirement laid upto 200 mm on trenches/on pillers complete all as specified and directed.
S&F cast iron sluice valve 200 mm bore with steel spendle PN 1.6 CI wheel flanged ends drilled holes including jointing material such as rubber gaskets, bolts, nuts & washers of suitable size complete all as specified and directed.
All as per Srl item No 36 but 150mm bore
All as per Srl item No 36 but 100mm bore
All as per Srl item No 36 but 80mm bore
S&F Gun metal gate valve 50mm bore with iron wheel head, screwed both ends for iron pipe fixing, heavy duty complete all as specified and directed.
All as per srl item 40 but 40 mm bore
All as per srl item 40 but 25 mm bore
All as per srl item 40 but 20 mm bore
All as per srl item 40 but 15 mm bore
S&F in replacement PP-R Gate valves 25 mm bore (brass insert) complete all as specified and directed.
All as per srl item No 45 but 20 mm bore
All as per srl item No 45 but 40mm bore
M&L for repair to Non Return Valve 200 mm bore in position by replacement of unserviceable parts (with new) such as brass ring packing/Rubber packing, nuts,bolts, washers, rubber insertion sheet complete all as as specified and directed.
All as per sr no 48 but 150 mm bore
M&L for Repair & Opening stuffing box of sluice valve 200 mm bore and S&F in repair of unserviceable parts (with new) i.e. Stainless steel spindle, check nut fabricated out of superior quality all as per sample as required at site including replacement of bolts, nuts & washers gaskets etc complete all as as specified and directed.
All as per Srl item No 50 but 150mm bore
All as per Srl item No 50 but 100mm bore
All as per Srl item No 50 but 80mm bore
M&L for repair to leaking lead/tyton/flanged joint of any dia, CI/DI pipe line by cocking and inserting extra lead/tyton/gasket/nut bolts if required, making good leakless the existing joint, including necessary excavation and earth work (returning filling will be done after testing the joint) complete all as specified and directed.
M&L for repair to leaking fusion joint of PP-R pipe 3-layer of any dia including providing PP-R fittings as required at site, making good leakless the existing joint, including necessary fittings if required, excavation and earth work (returning filling will be done after testing the joint) complete all as specified and directed. Note: Machine, tools required for repair for joint shall be brought at site by the Contractor without any extra cost, quoted rates shall deemed to be included this fact in to account.
M&L for repair to leaking/block/broken and cleaning of any dia, GI pipe line by inserting extra fittings/nut bolts if required and making good leakless the existing joint, including necessary excavation and earth work (returning filling will be done after testing the joint) complete all as specified and directed.
M&L for brick masonary valve pit of size 1200x1200x1200 mm (internal dimensions of chamber) including 23cm thick brick wall built in CM 1:6, 15mm thick plain cement plaster internally in CM 1:4 and flush pointing externally as the work proceeds, PCC 1:5:10 type E2 in foundation 156x156cm size, 40mm thick PCC 1:2:4 type B-1 in floor, 50mm thick PCC 1:2:4 as in coping over brick work, thick MS sheet cover with locking arrangement including lock of size 112x112cmx3 mm thick fixed to angle frame made out of 40x40x3mm angle iron, MS handle to sheet cover, MS hinges welded to frame and sheet cover, painted with two coats of synthetic enamel black paint over a coat of red oxide primer on steel work (internal and externally on steel work), two coats of white wash on plaster work including excavation and earth work in any type of soil complete all as specified and directed.
All as per Srl item No 57 but internal diamension of chamber 900x900x900 mm with suitable other diamentions
All as per srl item No 57 but internaldiamension of chamber 600x600x600 mm with suitable other diamentions.
Dismantling of existing mild steel plate covers including cutting, welding etc and S&F rolled Mild steel plates of FE 410 -10(Gde-E 250) quality-A (Plain) thickness not less than 3mm (OHT/UG Sump/valve chamber cover) as per required size, MS flat iron, locking arrangements including necessary welding, painting with two coats of synthetic enamel paint over a coat red oxide primer (internal and external) complete all as specified and directed.
Cleaning the vegetation including grass, bushes, small trees and all vegetation growth complete including digging out the root of bushes and small trees around the installation/sump/OH reservoir, valve chamber, including chamber etc filling the rough holes with earth and levelling the surfaces by removing all debris to a distance n.exc 50m complete all as specified and directed
M&L for Cutting and trimming of tree branches of girth upto 50 mm bore and 3M all around of any size over head tank/UG sump incl removing trimmed tree branches complete all as specified and directed by Engr-in-charge. Note :- Each cut will be measured and paid.
Testing for sample of borewell water for bacteriological and chemical analysis from DIRECTOR OF HEALTH SERVICES, ENVIRONMENTAL AND POLLUTION CONTROL WING, Pathankot NOTE : (a) Water sample shall be carried in sterilised bottle/watercan which will be issued by DIRECTOR OF HEALTH SERVICES, ENVIRONMENTAL AND POLLUTION CONTROL WING, Pathankot (b) The quoted rate shall deemed to be included transportation cost & cost of sterilised bottle, testing charges from the agency mentioned above.
Charges for attending break down of dosing plant any model, any capacity single Phase 230 volts, 50 Hz AC complete, disconnecting, servicing of of dosing plant through authorised machenic for fault finding, attending repairs when required (such as No start condition of dosing plant), repairing, cleaning, washing/reassembling the plant, connecting in position and testing complete all as directed by Engr-in-charge. Note :- All repairs as required to dosing plant shall be carried out from starting of dosing plant till smooth running and setting up the alignment up to the required paramenters including all minor parts repairs as required in ground, ordered by EIC. The contractor shall ensure complete servicing in his presence and the rep of MES.
Dismantling of mild steel work of any description including cutting, welding etc and S&F mild steel framed work such as ladders, walkways, railings, framework of water suplly installation and similar work confirming to FE-290, Grade E-165 including necessary welding, fixing with necessary cement work, painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L for painting to valve chamber of any size (not more than 1200x1200mm) with two coats of antifungal exterior emulsion paint inside and outside of chamber, two coats of synthetic enamel paint over one coat of red oxide primer on all steel surfaces, cleanign/removing small bushes and grass inside & outside of valve chamber complete all as specified and directed
S&F aviation obstruction light on top of Overhead Tanks die-cast aluminium alloy hosing Integral LED aviation light including making electric connection and testing complete all as specified and directed. Make :- Bajaj cat part no. BGAV 302LED or equivalent as approved.
S&F in replacement for Sheet metal enclosure for DB's 240 Volts SPN, 2 Two Ways with 200 Amps rated bus bar complete as specified and directed.
S&F in replacement MCB single pole with natural 240 volts 20 to 40Amps .
S&F in replacement Weather proof PVC flat twin core aluminium conductor of size 10 sqmm 2 core complete as specified and directed.
S&F in replacement 25 mm bore rigid non-metalic PVC conduit ISI marked meduium grade exclusive of boxes (junction/terminal boxes) but inclusive all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hootks etc complete all as specified and directed.
M&L for overhauling and repair of multistage VT pump of any make/capacity by disconnecting electrical/ mechanical connection and taking out pump from existing bore well approx depth varying from 45 M to 80 M with all accessories such as column pipe, top/line shaft, bushes, spiders and bowl assembly, transporting to workshop to carry out repair work, replacement of minor unserviceable components/spares like nuts, bolts, washer & suitable size the like with new, reassemble all the parts/portions (as elaborated under "supply only" items hereafter), refix at same location, position, re-lowering in same bore well, re-connection, re-commissioning and testing to ensure efficient and smooth functioning to obtain required discharge, etc complete all as specified and directed. Note : -1. Defective major components/spares elaborated hereafter in respecive item of schedule shall be measured as supply only.
Supply only 30/25mm bore stainless steel top shaft in multiple length each not exceeding 3m (as per sample).
Supply only 30/25mm bore stainless steel line shaft threaded on both ends in multiple length each not exceeding 3m (as per sample). .
Supply only 30/25mm bore stainless steel line shaft coupling (as per sample). .
Supply only 30/25mm bore stainless steel line shaft sleeve (as per sample). .
Supply only 125/150/100mm bore, 150mm long heavy duty MS socket fully threaded (as per sample).
Supply only gun metal bearing retainer of size 125/150mmx30mm (as per sample).
Supply only gun metal bearing retainer of size 100mmx25mm (as per sample).
Supply only 30/25mm bore bearing retainer synthetic rubber bush of size 150/125mm (as per sample). .
Supply only gun matel split type gland including 02 Nos studs suitable for 25 to 38 mm bore pump shaft including provision of gland packing (as per sample).
Supply only gun metal plated stuffing box bush suitable for 25 to 38mm bore shafts (as per sample). .
Cutting worn out portion of stainless steel top/line shaft of 25 to 30mm bore including threading on plain surface to match with existing threading of coupling etc complete all as specified and directed.
Supply only gun metal impeller suitable for 150/125mm delivery dia bowl assembly including suitable size impeller (as per sample). .
Supply only gun metal/bronze intermediate bowl case bush bearing suitable for 150/125mm bore bowl assembly (as per sample). .
Supply only CI neck ring for bowl assembly of any make/type/model for suction discharge and intermediate suitable for 150/125mm bore bowl assembly (as per sample). .
Supply only gun metal/bronze suction/discharge bowl case bush bearing of any type/make/model suitable for 150/125mm bore bowl assembly (as per sample). .
Supply only intermediate bowl case bush bearing rubber suitable for 150/125mm bore delivery bowl assy (as per sample). .
Supply only nuts bolts/washer/stud of appropriate size/type suitable for bowl assembly/column pipe/clamp (as per sample).
Supply only 30/38mm bore stainless steel pump shaft suitable for bowl assembly 9 to 18 stages in multiple length each not exceeding 3m (as per sample). .
Dismantlimng all parts of 3 phase 415 volts unserviceable electric motor (VT) of any type, make and capacity, cutting & removing existing burnt/short circuited winding wire, cleaning of core grooves and surfaces including assembling, commissioning and testing after complete repair to the satisfaction of Engineer In Charge complete all as specified and directed. (Note :- Cost of rewinding and spere parts shall be measured and paid seperately under relevant items of BOQ.)
M&L for rewinding of 3 phase electric motor of 30/40 HP VT pump with super enamelled copper winding wire of suitable gauge including impregnated paper, sleevs, varnish , tape and including suitable size of leads from starter to terminal plate, etc complete all as specified and directed.
All as per item 92 but electric motor of 50/60 HP VT pump.
Supply only Top shaft nut for 3 phase electric motor of VT pump of capacity 30 to 60 HP (as per sample). .
Supply only terminal plate of bakelite type including nut & bolt suitable for 3 phase electric motor of VT pump of capacity 30 to 60HP (as per sample). .
S&F in replacement of Borewell Submersible Pump set of capacity 20 HP and 15 KW, Head range 132-92 metre with flow range 500-700 LPM, 3 Phase, 440 Volt, 50Hz, pump model no KS8D-2008, 39 Amp, pump stages 8 Nos, 80mm outlet submersible pump complete all as specified and directed. Make; CG/Kirloskar/CRI
Supply only ball bearing suitable for 3 phase electric motor of VT pump capacity 30 HP to 60 HP any number, any type (as per sample). Make :- NBC/TATA/SKF.
Supply only ball/thrust bearing suitable for 3 ph electric motor of VT pump pump capacity 40 HP to 60 HP any number, any type (as per sample). Make :- NBC/TATA/SKF.
Supply only ratchet plate for 3 phase electric motor for VT pump suitable for 40 to 60 HP capacity (as per sample).
Supply only ratchet pully for 3 phase electric motor for VT pump suitable for 40 to 60 HP capacity (as per sample).
M&L for overhauling and repair of 3 Phase, 30 to 60 HP centrifugal pump set of any make by disconnecting electrical/mechanical connection, taking out motor from foundation, transporting to workshop to carry out repairs, replacement of minor unserviceable components/spares like suction/discharge nozzle, oil rings, casing wear ring, shuffing box, throttle bushing, wear rings, nuts, bolts, washer etc including necessary lath work, welding, metaling, turning, polishing, repair of housing case of DE/NDE side, reassemble all the parts/ componants, refix at same position in alignment, reconnection, re-commissioning and testing to ensure efficient and smooth functioning to achieve desired discharge of pump complete all as specified and directed Note: 1. Defective major components/spares elaborated hereafter in respecive item of schedule shall be measured and paid for separately as supply only.
Supply only ball bearing of DE/NDE of any type any number as per existing (as per sample ) suitable for centrifugal pump of capacity 30 HP to 40 HP. Make NBC/SKF/TATA.
All as per item 102 but for centrifugal pump 50 HP to 60 HP
Supply only high carbon steel shaft for centrifugal pump of capacity 40HP to 60 HP as per sample
Supply only heavy duty shaft sleeve with bush for centrifugal pump of capacity 40HP to 60 HP as per sample
Supply only bearing housing DE for centrifugal pump of capacity 40HP to 60 HP as per sample
Supply only bearing housing NDE for centrifugal pump of capacity 40HP to 60 HP as per sample
Supply only shaft end bushes for centrifugal pump of capacity 40HP to 60 HP as per sample
Supply only bearing housing sleeves for centrifugal pump of capacity 40HP to 60 HP as per sample
Supply only check nuts & impeller key for centrifugal pump of capacity 40HP to 60 HP (as per sample).
Supply only gland packing for centrifugal pump of capacity 40HP to 60 HPas per sample .
Supply only rubber gasket set for centrifugal pump of capacity 40HP to 60 HP (as per sample).
Supply only rubber seal for centrifugal pump of capacity 40HP to 60 HPas per sample
Supply only CI impeller suitable for centrifugal pump of capacity 40HP to 60 HP as per sample
Supply only bearing housing studs for centrifugal pump of capacity 40HP to 60 HP .as per sample
M&L for rewinding of 3 phase electric motor of 30 to 40 HP Centrifugal pump with super enamelled copper winding wire of same gauge including impregnated paper, sleevs, varnish and tape, etc complete all as specified and directed.
All as per item 116 but for capacity of motor 50 to 60 HP.
M&L for overhauling and repair of 3 Phase, submersible pump set of any make/capacity by disconnecting electrical/ mechanical connection, taking out pump from existing bore well approx depth varying from 60 M to 90 M with all accessories such as column pipe, transporting to authorized workshop to carry out repair work including replacement of minor unserviceable components/spares like nuts, bolts, washer, suitable size of gas cut for flanged colum pipe, reassemble all the parts/components, refix at same location/position, re-lowering in same bore well with all accessories, reconnecting and making connection with starter, commissioning and testing to ensure efficient and smooth functioning to obtain required discharge complete all as specified and directed. Note: 1. Defective components/spares elaborated hereafter in respecive item of BOQ shall be measured and paid for separately as supply only.
Supply only stainless steel shaft for submersible pump of capacity 15 HP to 40 HP (as per sample). .
Supply only gun metal impeller suitable for submersible pump of capacity 15 HP to 40 HP (as per sample). .
Supply only stainless sleeves for submersible pump of capacity 15 HP to 40 HP (as per sample). ..
Supply only gun metal bush suitable for submersible pump (as per sample).
Supply only rubber bush suitable for submersible pump (as per sample). .
Supply only CI intermediate suction/discharge case suitable for 125/100mm bore of submersible pump (as per sample). .
Supply only pump motor coupling of submersible pump (as per sample). .
Supply only thrust plate for submersible pump set of capacity 15 HP to 40 HP (as per sample). .
M&L for Rewinding of 3 Phase, 20 to 30 HP submersible electric motor with super enamelled copper winding wire of same gauge including impregnated paper, sleevs, fibre glass, varnish , tape and including suitable size of leads from stater to terminal plate, etc complete all as specified and directed
All as per item 127 but for submersible electric motor of capacity 35 HP to 40 HP.
M&L for 10 Sqmm, 3 core, 1100 Volts, copper conductor flat cable for submersible pump, making connection to motor including taking out existing unservicable cable complete all as specified and directed. Make :- Finolex/Plaza/Polycab/L&T
Cutting and removing worn out threaded portion of 100 /125/150 mm bore MS column pipe, making threads to required length to match with existing connecting system etc complete all as specified and directed.
Supply only 150mm bore 7mm thick MS column pipe, threaded both ends with one full threaded MS coupling in multiple length, each not exceeding 3m, including nuts, bolts and gasket complete all as specified and directed. Make : Jindal/Prakash Surya/TATA
All as per item 131 but 125mm bore column pipe flanged both ends
All as per item 131but 100mm bore 5mm thick MS column pipe flanged both ends
All as per item 131 but 80mm bore 5mm thick MS column pipe flanged both ends
Disconnecting all electric/water supply connection from the suction sweepper machine/mono block pump set of capacity 3HP to 5.5HP electric driven AC single/three phase, 230 /415 Volts of any make/model from any installation, transporting to workshop dismantling, removing the burnt out windings, cleaning the stator slots, rewinding with super enamelled copper wire of suitable gauge, insulating, proper heat varnishing, returned from work shop,re-installation at same position including commissioning and testing complete all as specified and directed.
Repair overhauling of suction swipper machine/mono block pump up to 2 to 5 HP by replacing worn out gland packing, gasket, bearing bushes, Scraping out of pump casing, bolts, nuts, washers etc, cleaning greasing tightening of bolts, nuts incl painting with one coat of synthetic enamelled paint to pump only, Re-installation incl alignment with motor, testing and complete all as specified and directed.
S&F MCCB 160 amps 3 pole 25 KA adjustable type. Make:C&S ELECTRIC, BCH, INDOASIAN, HAVELLS, CROMPTON, ANCHOR, GE POWER, HPL, STANDARD ELECRICALS,
S&F MCCB 200 amps 3 pole 36 KA adjustable type. Make:C&S ELECTRIC, BCH, INDOASIAN, HAVELLS, CROMPTON, ANCHOR, GE POWER, HPL, STANDARD ELECRICALS
S&F MCCB 250 amps 4 pole 36 KA adjustable type. Make:C&S ELECTRIC, BCH, INDOASIAN, HAVELLS, CROMPTON, ANCHOR, GE POWER, HPL, STANDARD ELECRICALS
S&F MCCB 400 amps 3 pole 35 KA adjustable type. Make:C&S ELECTRIC, BCH, INDOASIAN, HAVELLS, CROMPTON, ANCHOR, GE POWER, HPL, STANDARD ELECRICALS
Development of borewell untill sand free water obtained/required yield by means of pumping by Air Compressor of minimum pressure 10 Kg/sqcm complete all as directed by Engineer -in-Charge. Note: (Air compressor shall be arranged by contractor at his own without any extra cost)
Supply, installation, commissioning and testing star delta starter suitable for 30 HP motor relay range 30 to 50 Amp, including single phase preventor fully automatic in sheet metal enclosure type AC, 3 phase, 415 volts, 50HZ including taking out old unserviceable starter complete all as specified and directed. Make: L&T MU-G30 / FASD cat part No CS96008COGO or equivalant in HAVELLS/ABB
All as per item 142 but suitable for 40 HP motor relay range 36 to 60 Amp Make: L&T MU-G40 / FASD cat part No CS90908LOTO or equivalant in HAVELLS/ABB
All as per item 142 but suitable for 50 HP motor relay range 45 to 75 Amp Make: L&T MU-G50 / FASD cat part No CS96009COJO or equivalant in HAVELLS/ABB
Charges for attending break down of washing Machine Hydro extractor of cap 25/30 Kgs and Tumbler drying machine 25 Kgs three ph 415 volts, 50 Hz AC complete, servicing, fault finding by only machenic, complete repairs as required (such as No start condition) of washing machine, testing of machine for starting the washing machine till smooth running and setting up the alignment/required paramenters, replacement of all minor parts such as fan belt for motor Micro processor based control panel etc to the entire satisfaction of Engr in Charge.
Deduct: Total amount of SCHEDUL 'A' SECTION-II (SCH OF CREDIT) Rs 1,77,773.00 ( to be deducted from Schedule ‘A’ (BOQ) to arrive at the Contract Sum.
KULBHUSHAN AGGARWAL
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .