REPAIRS TO DRAINS, FENCING, MS GATE, BOUNDARY WALL AND ALLIED WORKS OF ZONE B AREA AT SEVOKE ROAD MIL STN UNDER GE SEVOKE ROAD

Amount

Demolition of cement concrete (un reinforced) in ground floors and paving n. exc. 15 cm thickness (below or above ground level) removing rubbish off the premises etc complete all as specified and directed

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in concrete and making good disturbed ground complete all directed. (Note : Quoted rate also include for taking out old rusted/ unserviceable galvanised steel barbed wire or chain link fencing)

Taking down galvanised steel barbed wire of any description as in fencing, fixed to any type of standard rails, dismantled wire to be neatly coiled on drums and kept in safe custody for reuse complete all as directed. (Note: to be measured only for serviceable portion of wire)

Demolition of brickwork built in cement mortar, separating serviceable bricks for reuse and removing rubbish off the premises etc complete all as specified and directed

Demolition of Bricks (laid flat or on edge) or brick tiles in floors, channels,kerbs, aprons, etc. (each layer) , laid, bedded and pointed in any mortar, separating and stacking serviceable bricks for reuse and removing unserviceable portion complete all as specified and directed.

Dismantling of Bricks (laid flat or on edge) or brick tiles in floors, channels,kerbs, aprons, etc. (each layer) , laid, bedded and pointed in any mortar, separating and stacking serviceable bricks for reuse and removing unserviceable portion complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.50 cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25cm, watering and removing surplus soil to a distance not exc 50 m and making good surfaces in soft/loose soil complete all as specified and as directed.

Materials and Labour for Sand filling under floors or in foundation including watering and consolidation complete all as specified and as directed.

Materials and Labour for broken stone or boulder hardcore of gauge n exe 63mm deposited, spread and levelled in layers n exe 15cm thick, watered and rammed to a true surface.

Materials and Labour for plain cement concrete (1:3:6) type C-2, using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and as directed.

Materials and Labour for plain cement concrete (1:3:6) type C-2, using 40mm graded stone aggregate as in surface channel and drain including necessary formwork complete all as specified and as directed.

Materials and Labour for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. all as specified and as directed.

Materials and labour for finishing concrete surfaces finished even and smooth using extra cement, complete complete all as specified and directed.

Materials and labour for 75 mm thick plain cement concrete (1:4:8) type D2 using 40 mm graded stone aggregate as in sub-base of floors etc. finished the surface of concrete even and fair complete all as specified and directed.

Materials and labour for 75 mm thick plain cement concrete (1:3:6) type C2 using 40 mm graded stone aggregate as in floors, hard standing, plinth protection, path etc. finished the surface of concrete even and smooth without using extra cement, laid in alternate bays including provn of 10 mm joints (at an interval of 3 m and corners) duly filled with fine sand and bitumen in a ratio 3:1, complete all as specified and directed.

Materials and labour for plain cement concrete (1:2:4) type B0(12.5mm graded stone aggregate) as in cills, steps, seismic and other similar bands, plinth courses, string courses , lacing courses, parapets and railings up to 60cm in height , benching, copings, kneelers, apex stones, bed plates, kerbs including weathering , slightly rounded or chamfered angles and throating, complete all as specified and directed..

Materials and Labour for precast reinforced cement concrete (1:2:4) type B1 using 20 mm graded stone aggregate as in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area n exc 100 sq. cm, with or without chamfered angles and flat, splayed, rounded or mitred tops as directed complete all as specified and directed. (Note: Steel reinforcement shall be measured & paid separately)

Materials and Labour for TMT bars 10 mm dia and over, as reinforcement for concrete cut to length, bent to shape required including cranking, bending, spirally hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia, complete all as specified and directed.

Materials and Labour for TMT bars 6 to 10 mm dia in stirrups, spacers and binders, as reinforcement for concrete cut to length, bent to shape required including cranking, bending, spirally hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia, complete all as specified and directed.

Supply & fixing mild steel framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde-E-165 complete all as specified and directed.

Supply & fixing Mild steel screw bolt (Machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends each screwed end to be filled with washers and one hexagonal or square nut 5 to 10mm dia shank and exc 5cm but n exc 10cm long complete all as specified and as directed.

Materials and Labour for rolled mild steel hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

Materials and Labour for round bars 10 mm dia and over for fixing of chain link fencing, cut to length, bent to shape required including cranking, bending, hooking ends and fixed, complete all as specified and directed.

Supply & fixing mild steel flat iron (conforming to Fe - 290 GDE E-165) for securing fencing post including drilling holes, for screwing bolts etc complete all as specified and as directed.

Materials and labour for preparing of new steel surfaces of any description , over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

Materials and labour for brick work with sub class 'B' burnt clay bricks straight or curved on plan exc 6 meter mean radius built in cement mortar 1:6 complete all as specified and as directed.

All as per Item No.26 above but except bricks complete all as specified and directed. (Old seviceable bricks obtained from demolition shall be reused after cleaning)

Materials and labour for Bricks, sub class B, laid on edge in floors;old size brick, Bedded and jointed in Cement mortar 1:6 and pointed in Cement mortar 1:3 complete all as specified and as directed.

All as per Item No.28 above but except bricks complete all as specified and directed. (Old seviceable bricks obtained from demolition shall be reused after cleaning)

Materials and labour for Bricks, sub class B, laid flat in floors/drain, old size brick, bedded and jointed in Cement mortar 1:6 and pointed in Cement mortar 1:3 complete all as specified and as directed.

All as per Item No.30 above but except bricks complete all as specified and directed. (Old seviceable bricks obtained from demolition shall be reused after cleaning)

Materials and labour for flush pointing to brick walls in cement mortar (1:3) on brick work or concrete surfaces,complete all as specified and directed.

Materials and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

Materials and labour for rendering 15mm thick in cement mortar (1:4) on other than fair faces of brick work or concrete surfaces,WPC shall be mixed with morter as directed, finished even and smooth without using extra cement , complete all as specified and directed. (Note: WPC shall be measured and paid separately as supply only)

Supply only integral Water Proofing Compound of approved make.

Materials and labour for applying three coats of white wash on new wall surface including preparation of surface, complete all as specified and directed.

Materials and labour for chequered cement concrete tiles 30cm x 30 cm size, 25 mm thick (with grey cement and pigments), set, jointed and pointed in neat cement slurry in floor with grey cement mixed with pigments to match with the colour of tiles, laid over and including 20 mm thick screed bed in CM 1:6, complete all as specified and directed.

Materials and labour for 60mm thick Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size conforming to IS 15658- 2006 M-35 grade, laid as directed to any shape. Complete all as specified and as directed

Supply & fixing galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings, straining, tightening and fixing to MS Nibs embedded in precast RCC fencing posts, struts, etc. securing and tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. Note: Each line wire to be measured.

Fixing only old serviceable steel barbed wire of any description, straining, tightening and fixing to MS Nibs embedded in precast RCC/MS fencing posts, struts, etc. securing and tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. Note: Each line wire to be measured.

Supply only chain link fencing with 4mm dia galvanised steel wire ,size of mesh 100mmx100mm complete all as specified and as directed.

Fixing only chain link fencing including line wires , any mesh, size and type to any type of standard, rails , straining bolts, etc including provision of binding wire complete all as specified and as directed.

D.D. BROTHERS (BID ID -3359938)

NARESH GUPTA (BID ID -3360422)

M/S S.B. CONSTRUCTION (BID ID -3359220)

C.P. GEORGE (BID ID -3357338)

M S BHARAT CONSTRUCTION CO. (BID ID -3356177)

TAPASH SAHA (BID ID -3360666)

LIBERAL ENGINEER CONSTRUCTION (BID ID -3360597)