REPAIR TO CERTAIN ROADS, POT HOLES, BERMS, ROAD FURNITURE AND PATH ETC UNDER AGE B/R-III AND AGE B/R-V UNDER GE (N) BATHINDA AT BATHINDA MIL STN

Amount

Repairs to potholes not exceeding 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths etc. cutting around edges to at least 25 mm in depth and applying tack coat @ 5 kg per 10 sq m of paving bitumen (VG-10), putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sq m of paving bitumen (VG-30), blinded with 0.09 cum of stone chippings, 6.3 mm size and again well rammed, depth of pot holes exceeding 30mm. Note: (i) Pot holes shall be marked and checked by Engineer-in-charge. 100% quantity before commencement of work and shall also be entered in MB with reference to permanent objects before starting carpeting work. (ii) Rate quoted by contractor shall deemed to be including of supply of premixed macadam binder and chippings.

Preparing black top bituminous surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with air pressure through air jet using air compressor to remove all loose dirt etc including removing the mud etc to a distance minimum 1.5 m from edge of road and applying evenly a tack coat of bituminous primer using paving bitumen (VG-10) @ 5 Kg per 10 Sqm of road surface by sprayer operated hot pressure mechanism including Supplying, laying, spreading 30 mm consolidated thickness of semi dense asphaltic concrete with Job mix formula using paving bitumen (VG-30) at the rate of 5.5% binder content by weight of total mix using mechanical paver for leveling within the specified tolerance as specified in SSR Part - I, rolled and consolidated to required camber and gradient with power roller for uniform smooth surface etc complete all as specified and directed by Engineer-in-Charge. Note :- (i) The job mix formula shall be approved by GE. (ii) 5.5% binder content has been specified for quoting purpose of bid. If the quantity of the bitumen exceeds 5.5% as mentioned in Schedule A / BOQ during job mix formula, no plus price adjustment shall be made. If the quantity of the bitumen required as per job mix formula works out to less than 5.5% the recovery of the supply only bitumen shall be effected @ Rs 60/- per Kg. The cost of transportation of material and testing charges shall be borne by the Contractor.) (iii) Contractor shall intimate the planned date of incorporation of mix in advance to GE. Premix will be approved in writing by Rep of Accepting Officer at plant site before incorporation of the same in the work .

Supplying, laying & spreading upto 75 mm thick (consolidated thickness) premix bituminous macadam filling in depression (using 20 mm graded stone aggregate) in single layer with using mechanical paver using paving bitumen (VG-30) @ 4 % by weight of total mix with job mix formula, laid / rolled and compacted / consolidated to required camber and gradient with 8 to 10 tonne power roller to a uniform smooth surface etc complete all as specified and directed. Note :- (i) The job mix formula shall be approved by GE. (ii) 4.0% binder content has been specified for quoting purpose of bid. If the quantity of the bitumen exceeds the 4% as mentioned above, no plus price adjustment shall be made. If the quantity of bitumen required as per job mix formula works out less than 4.0%, the recovery of the supply only bitumen shall be effected @ Rs. 60/- per Kg. The cost of transportation of material and testing charges shall be borne by the contractor. (iii) Contractor shall intimate the planned date of incorporation of mix in advance to GE. Premix will be approved in writing by Rep of Accepting Officer at plant site before incorporation of the same in the work

M&L for painting lines, dashes, arrows, letters, marking etc of 3.0 mm thick film on new surfaces or previously treated road surfaces with hot applied retro reflective thermoplastic road marking paint (White / Golden yellow) conforming to MORT&H (clause 803.4) all as specified with 8% glass beads using special applicator machine with heating arrangement upto 160 degree C including cleaning and drying the existing road surfaces to ensure dust, oil, grease and moisture free surfaces before applying the paint complete all as specified and directed.

All as per ser item No.4 but including removal of existing road marking paint.

S&F in repairs two way (dual direction) reflective road cat eye of plastic body of approx dimensions 110mmx 110mm x 20 mm with red / amber / white reflective panels and fixing the same on road surface by applying approximately 100 gm Epoxy mixture and placing the cat eye without applying excessive pressure and additional fixed with 12 mm dia and 120 mm long zinc plated steel nail at the centre of cat eye complete all as specified and directed by Engineer-in-Charge. (Model No DA-52 of make Dark eye or equivalent make of 3M/ Greenlite)

S&F in repairs solar road stud having 3 LED of colour Red/Yellow to a side (total 6 Nos) housed in a tough pressure die casted aluminium alloy of approx size 125 x 125mm or 120 x 130mm with built in stem of suitable length for fixing with epoxy, LEDs solar cells battery & light sensor well protected inside under tough unbreakable polycarbonate transparent sheet top system, workable for 2-3 days (night) after full charge in 8 to 10 Hrs complete all as specified and directed. (Cat part No GPL-03-01 SRS BN of Greenlite or equivalent Make of 3M/Dark eye.

S&F in repairs dual direction delineator 600 mm long made of 16 gauge MS rectangular pipe of size 25 x 68mm, pipe stove enameled and baked to 120 º Celsius or powder coated, head made of ABS plastic rectangular moulded with flat face provided with high intensity prismatic reflector of colour (white/yellow/red) of size 100 x 125mm with additional 2 reflective strips of 25mm wide, shade as approved by GE and fixing in cement concrete (1:2:4) type B1 using 20mm graded stone aggregate with size of block 300mmx300mmx350mm deep including excavation and earth work in any strata complete all as directed by Engineer-in-charge. Note: - The rate of PCC & earth work is included in the unit quoted rate. (Cat part No GPL-UBPH-11-56 of make Greenlite or equivalent make of 3M/ Dark eye)

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc, laid, bedded and pointed in any mortar complete all as specified and directed.

M & L for 100 mm thick cement concrete type D-2, 1:4:8 using 40mm graded stone aggregate as in sub base, complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block 60 mm thick, ISI marked with grey cement and no pigment, factory made, any shape and size, conforming to IS 15658-2006, made out of M-35 grade concrete laid over and including sand filling of 25 mm thick layer under paver block including consolidation complete all as specified.

M & L for cement concrete type B-1, 1:2:4 using 20mm graded stone aggregate as in coping, packing around interlocking paver blocks complete all as specified and directed.

M & L factory made precast cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in kerb stone, quion block, apex stones etc, set in cement mortar (1:4) including formwork weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

Taking down and removing old kerb stone of any size and description complete all as specified and directed.

M & L for preparation of new or previously treated/untreated concrete surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint in different tint complete all as specified and directed.

Supply, fabrication and fixing fully retro-reflectorised cautionary, mandatory and informatory sign board of oval shape of size as per drawing and IRC:67-2012 made of high intensity grade sheeting vide clause 801.3 of MORTH specification, oval shape frame made out of mild steel pipe 25mm dia medium grade, sign board supported on post made out of medium grade MS hollow pipe confirming to IS 1161-1979 of grade Fe-410, leg of size 50 x50 x 60 cm in cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate including necessary excavation and earthwork in any type of soil strata complete all as shown and specified in drawing, sign board made by using MS plate 2mm thick fixed in inner side of MS pipe frame complete all as specified and as shown in drawing. MS plate to be covered with high intensity grade retro reflective sheeting as per IRC standard (AVERY DENNISON) blue/ green or as required colour pasted firmly without appearance of bubbles and after that writing/ pasted a computer cut letters or signs of appropriate sizes made from retro reflective tape (High Intensity Prismatic Reflective Sheeting ) including two coats of water based acrylic polyurethane enamel paint on MS surface over a coat of red oxide primer complete all as per technical specification and as directed by Engineer-in-Charge. Note:- All dimensions, size of MS pipes and design as specified in drawing No. GE(N) Comp-03(R)-2019 Sheet 1/2 uploaded with tender documents.

Supply, fabrication and fixing fully retro-reflectorised cautionary, mandatory and informatory sign board of approx size 12 x 1.22 mtr on both sides of MS frame rectangular shape as per IRC:67-2012 made of high intensity grade sheeting vide clause 801.3 of MORTH specification, sign board made by using aluminium sheet (ACP sheet) 5mm thick fixed over existing MS frame, sign board supported on 6m high MS frame. Aluminium sheet to be covered with high intensity grade retro reflective sheeting as per IRC standard (AVERY DENNISON) blue/ green or as required colour pasted firmly without appearance of bubbles and after that including writing/ pasted a computer cut letters or signs of appropriate sizes 7.5cm to 15 cm high made from retro reflective tape (High Intensity Prismatic Reflective Sheeting ) including taking down old sheets of any description and size complete all as per technical specification and as directed by Engineer-in-Charge. Note:- Rate is including for necessary accessories and scaffolding required up to 8 mtr height and dismantling and refixing of MS Frame as required at site

Supplying, laying & spreading premix bituminous macadam filling ( Consolidated thickness) as in speed breaker/ speed bump as required shape and size in single layer with using mechanical paver using paving bitumen (VG-30) @ 4% by weight of total mix with job mix formula laid/ rolled and compacted/ consolidated to required shape and size to a uniform smooth surface etc compete all as specified and directed

M & L for frame work for sign board or any other structure/ position made out of stainless steel chromium plated round/ square pipes 304 grade, cut to shape including bending, welding, drilling, gusset plates and riveting complete all as specified and directed by Engineer-in-Charge. Note:- Rate is including for necessary accessories required at site including leg/ post embedded in PCC block of size 40cm x 40cm x 50 cm in cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate including necessary excavation and earth work complete all as specified and directed by Eng-in-Charge.

Supply and fixing aluminium composite panel sheet 6mm thick used for informatory/ cautionary/ warning sign board for road safety features etc, fitted / framed in steel pipe frame including fixing arrangements complete all as specified and directed by Eng-in-Charge. Note:- Steel frame, legs, letter writing shall be measured and paid separately under appropriate item of BOQ.

Material and labour for writing letter or figures arrows, Bldgs/ colony layout computer cut (Block Roman), italic or Indian) width 25mm and height as directed by Eng-in-Charge, made out of ertry reflective luminious tape as per IRC standard, in approved colour, pasted firmly without appearance/ sign of bubbles on aluminium sheet complete all as specified and directed by Eng-in-Charge.

S & F in repair to Road Speed breaker fixed with bolts and adhesive complete all as specified and directed by Eng-in-Charge. (Cat part NoALC-PSBI of Asian Loto or equivalent Make of 3M/Dark eye/Greenlite.

S & F for convex mirror of 1000mm dia made from long life poly carbonate with strong impact resistant and shuttle proof fitted with a sun shield or protective hood of colour as approved by GE and 75 mm dia MS pipe duly painted of approved colour of suitable length as directed including fixing in cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate with size of block 450x 450x600mm deep including earthwork complete all as specified and directed by Eng-in-Charge..

Supply and fixing for logo, area exceed 1 Sqm but not exceed 25 sqm each pasted on retro reflective luminious tape in approved colour , pasted firmly without appearance / sign of bubbles complete all as specified and directed by Eng-in-Charge.

Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender from total amount of Schedule 'A'/BOQ

FAIR DEAL CONSTRUCTION CO

M/s Azure Infrastructure Construction Co.

JB Infrastructure