RENOVATION OF TYPE T 7 1 HOUSE IN JUGIAL COLONY AT RANJIT SAGAR DAM SHAHPURKANDI IN DISTT PATHANKOT

Removing Doors and Window (Steel or Wood) with chowkhats by making Recesses in walls when the wall is not to be dimantled. a) Doors of area 3 sqm and below b) Window of area 3 dqm and below

Doors of area 3 sqm and below

Window of area 3 sqm and below

First classburnt brick work laid in cement sand mortar 1:5 in first stoery upto 4 meters above plinth level.

Chowkats of Commercial hard wood such as Hollock confirming to ISI specification no. 1003 m kiln seasoned of doors and window including iron hold fasts corner straps cleats,stops,bolts for hold fasts etc,complete fixed in position (Section 60mm X 150mm)

Double Rebate (60 mm x 150 mm) (60 mm)

Single Rebate (60 mm x 150 mm)

12.50 mm thick Cement Plaster 1:5 (Total plaster 510.19 @ 40 % = 204sqm).

Cement Concrete 1:2:4 with Stone ballast.

Providing and laying vertified floor tiles of size 600x600 m size premium quality manufactured using Double Charge Technology with water absorption less than 0.08% and conforming to IS :15622 of approved make in all colours and shades,laid on existing flooring with cement based high polymer modified quick set tile adhesive(water based) of approved make IS 15477 marked using 5 Kg adhesive per sqm of tile area in average 3mm thickness over existing base etc.complete (Design is homogenous throughout the tile body).

Coloured glazed tiles 20cm x2ocm and 5 mm thickin skirting and dado on 12 mm thick cement plaster 1:3 base an joined with white cement slurry in joints including bevelled corners.

Factory manufactured flush door fixed in position iron hinges,etc (excluding the cost of any fitting other than specified above but including labour for fixing the same in position(Code:II Revision IS-2191 Part-1)1973 (a)(iv)(35mm thick)

Wire gauze deodar wood door shutter without springs housed in chowkats 35mm thick

Hollok wood doors shutter window shutter including hinges,screws,chocks,cheats,stops,cords,etc.complete fixed in position.panelled,glazed or glazed and panelled 35mm thick

Wire gauze deodar wood door shutter without springs housed in chowkats 35mm thick

Providing & Fixing glass panes with nails and putty or wooden strip complete in all respect

Glazing area above 0.09 sqm4mm thick or10.78 Kg/sqm.

5.5mm thick plate glass (INDIAN).

Cost of Aluminium fitting complete for drors,window such as tower bells,handles and screw etc. for these fitting (Excluding sliding bolt)

For shutter area up to 0.50sqm.

Providing and fixing hydraulic door closer ISI mark with necessary screw etc.Complete I.S.I Designation No.II(SIZE OF DOOR 701MMTO 850 MM)

Curtain rod 25mm dia Aluminium pipe with brackets fixed in position including nails and screws etc.(Teak Wood)

Hollock wood cup board shutter with plywood panels or faced on both side fixed in position (excluding the cost of handles,bolts hasp with staples but including the labour for fixing them) 30mm thick

Regrding terracing of mud plaster covered with tiles or bricks in cement by dismentling tiles or bricks removing mud plaster preparing the surface of mud plaster to proper slope relalying mud plaster Gobri leaping and tiles of bricks grouted in cement mortar 1:3(1 Cement and 3 fine sand) including replacing unserviceable tiles or bricks with new over and disposal of unsurfaceable materials to the dumping ground within 50 meter lead ( The cost of new tiles or bricks excluded)

Supply of new tiles in the place of broken tiles.

Top khurra 0.6m x 0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 OVER 50mm thick cement concrete 1:8:16.

Cement Concrete 1:2:4 gola 10cm X 10 cm concave quadrant along junction of roofs with parapet wall finishied smooth,where specially specified

Wrought iron and mild steel ladder,framed grill,grating etc.with ends of bars,riveted or welded orforged,frmed window guards,barred iron doors,stair case,iron railing including costs of bolts and nuts or screws or welding rod,complete fixed in postion.

Providing and fixing 14 gauge MS sheet garege doors with 40mmX40mmX6mm angle iron frame with diagonal braces 3.15mm gusset plates including locking arrangement with handles etc.complete in respects.

Conglomerate floor 50mm thick cement concrete topping 1:2:4.

Steel work ,fixed independently without connecting plates,including cutting,hosting and fixing in position:- Tees,angles and channels

Providing and fixing 10 gauge welded mesh of 25mmX25mm size fixed on steel glazzing with MS flat 20mmX6mm beeding complete in all respect including painting two coats with Sythetic Enamel Paint and Priming coat.

Scraping (a) White wash and colour wash

Prepration of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two coats to get required finish

Distempring with Acrylic washable oil bound distemper(of approved manufacture) two coats over one priming coat to give an even shasde.

Perparation of plywood surface for painting including sand parpering the surface and applying filling with approved quality fillers consisting of white lead,linseed oil,varnish, and chalk Mitti including finishing the surfaceto required finish complete.

Painting two Coat including priming coat with synthetic enamel paint in all shades of wood work metallic or plastered concrete surface to give an even shade(16.17 +18)

Finishing walls with acrylic smooth exterior paint of required shade with two coats applied @ 1.67 liter/10sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10sqm

Providing and fixing celing consisting 600mmX600mmX12.5 thick Gypsum Board GI Cradling hanged from the ceiling by means of GI hanger complete as per drawings,specifications andto the entire satisfaction of engineer-in-charge.

Providing and laying jointing fixing and testing G.I Pipe lines B-Class including cost of specials such as tees,bends,sockets,elbows ets.testing cutting threading inside building complete.

a) 15mm i/d

b) 20mm i/d

Providing & Placing in position on terrace(at all Floor level) HDPE water storage tanks of approved make with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes but without fittings and base support for tank

a) Triple layer tanks.

Providing and fixing in position chinawear wall hunged European type water closet with P trap or S trap of approved make(to the approvel of engineer-in-charge)with or without 10 ltr. China wear matching flushing cistern and seat cover complete in all respect and to the entire satsifaction Engineer in charges

Chinawear estended wall mounted EWC with matcing cistern and seat cover all complete in all respect.

Providing and fixing in position vitreous chinawear white lavatory suits of approved make(to the approvel of engineer-in-charge)including bras studs without C.P fitting complete in all respect.

size 630mmx450mm

Providing and fixing in position C.P Brass auto close piller cock of approved make.

Providing and fixing in position in C.P Brass center hole basin mixer of approved make all in respect.

Providing and fixing in position C.P elbow action piller tap or C.P elbow action bib cock of approved make complete in all respect.

Providing and fixing in position 15mm i/d C.P Brass wall mixer approved make complete in all respect with Telphonic shower.

Providing and fixing in position stainless steel sinks of approved make 1mm thick grade 304 (18/8) with waste coupling complete in all respect.

size 600mmx450mmx225mm Inet size Excluding flat edge)

Providing and fixing in position C.P brass over head shower one flow shower arms with 15mm i/d inlet of approved make complete in all respect.

Providing and fixing in position paper holder of approved make fixed in to wall with C.P brass with screw complete in all respect.

a) C.P brass toilet paper holder.

Providing and fixing in position towel rails/ring of approved make fixed in with rawl/plugs embdded in walls with brass screws complete in all respect.

d) CP brass towel bracket 610mm long

Providing and fixing in position CP brass soap dish of approved make fixed into wall with role plug and CP brass screw complete in all respect.

Providind and fixing in position 5mm thick bevelled edge mirror of superior glass complete with 4mm thick hard board backing fixed in with role plug 50mm CP brass screw and washer and S/S studs on top complete in all respect size 600mmx450mm

Providing and fixing in position 15mm i/d BIB cock of approved make complete in all respects.

a) (i) CP brass BiB cock long Nose long body without flange.

Providing and fixing position PVC flexible tube connection of approved make complete in all respects.

a) PVC tube connection of size 15mmx300mm with CP Brass nut

Providing and fixing in position HCL soil vent or antisyphonage pipes to ISI specification of approved make including cutting,jointing,wastage,but excluding cost of lead jointing.

a) 150 mm i/d HCI pipe line laid complete

b) 100 mm i/d HCI pipe line laid complete

c) 75 mm i/d HCI pipe line laid complete

Providing and fixing HCI floor trap conforming to ISI specification(IS:1729)of approved make of the self cleaning design with CP Brass hinged grating with frame with or without vent arm and including cement concrete 1:2:4 under and round the floor trap where requried upto floor level comlete in all respects including cutting and making good the walls and floors etc. minimum depth of water should be 150mm with a minimum seal 150mm

b) With 75 mm i/d outlet shallow seal.

c) With 100 mm i/d outlet shallow seal.

Providing and fixing in position C.I gully trap cover weighing approximately 7.26 Kg and fram for gully trap chamber clear opening size 300mmx300mm and outside size 330 mm x330mm including painting the exposed surface with 3 costs of black bitumastic superior paint of approved make.

Providing and fixing in position grating of approved make size 150mm x150mm for gully trap..

a) HCI grating including painting with black bitumastic superior paint of approved manufacture of three coats

b) PVC Grating.

Providing lead caulked joints to H.C.I. pipes and specials conforming to I.S.I. Specification (IS 1729) of approved make including cost of lead yarn, fuel and tools etc.

b) 100 mm i/d (1.36 Kg)

c) 75 mm i/d (1.13 Kg)

Providing lead caulked joints to H.C.I. pipes and specials conforming to I.S.I. Specification (IS 1729) of approved make including cost of lead yarn, fuel and tools etc.

b) 100 mm i/d (1.36 Kg)

c) 75 mm i/d (1.13 Kg)

Ashok Kumar Govt Contractor

M S Associates