Construction of Kalyan Mandap near TPWODL office at Brajrajnagar Municipality

KALYAN MANDAP (GROUND FLOOR) Clearing grass and removal of rubbish up to a distance of 50 metres outside the periphery of the area .

Excavation of Earth work in foundation in hard soil within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods and depositing the excavated materials within intial lead and lift, as per the direction of the Engineer-in-charge.

Supply & Filling in Foundation and Plinth with excavated materials including watering and ramming as directed by Engineer-in- charge for cum.

Filling foundation and plinth with sand and well watered and rammered etc. complete including cost of sand.

Plain Cement concrete (1:3:6) by using 4 cm size B.H.G metal including cost, conveyence etc. complete.

R.C.C. works (M-25) in foundation, footing, beams, plinth band,footing ,base of columns,lintels, roofs, chhajas mass concrete etc. using 10 mm & 20 mm size black hard granite crusher broken chips including hoisting, lowering, laying and compacting, watering, curing for 28 days including centering and shuttering and finished the exposed surface smooth including all cost, conveyances, royalties and taxes of all materials and cost of labour with T & P required for the work etc. all complete in all respect but excluding cost of Steel and labour charges for bending and binding as per the Direction of the Engineer in charge. A-FOOTINGS

B) PLINTH BEAM

C) ALL KINDS OF BEAMS AND COLUMN

D) G.F SLAB,LANDING AND CHAJJA

E) G.F STAIRCASE EXCLUDING LANDING

F) LINTEL BAND

Supplying, fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specifications.

Fly ash brick masonry of size(25cmx12cmx8cm) size in Foundation & Plinth mortar (1:6) including splays, cutting circular moulding, corbelling, chamfering and similar such type of works, watering & curing including cost, conveyances, royalties taxes of all materials and cost of all labour with T&P required for the work etc. all complete in all respect as per the Direction of Engineer in charge.

Fly Ash. Brick masonry using Fly Ash. Bricks having crushing strength not less than 75 Kg. / cm2 in cement mortar (1:6) after immersing the brick for six hours in water before use in "superstructure" including splays, cutting circular moulding, corbelling, chamfering and similar such type of works, watering & curing including cost, conveyances, royalties taxes of all materials and cost of all labour with T & P required for the work etc. all complete in all respect as per the Direction of Engineer in charge.

12mm thick cement plaster (1:6) inside over brick massonary after racking out the joints watering and curing etc. complete with cost, conveyance royalties and taxes of all materials & all labour with T & P required for the work etc. all complete in all respect as per the Direction of the Engineer in charge.

16mm thick cement plaster (1:6) outside over brick walls in all floors after racking out joints including watering & curing etc. complete with cost, conveyance royalties & taxes of all materials & cost of all labour with T & P required for the work etc. all complete in all respect as per the Direction of the Engineer in charge.

6 mm thick cement plaster (1:4) ceiling including watering & curing etc. complete with cost, conveyance royalties & taxes of all materials & cost of all labour with T & P required for the work etc. all complete in all respect as per the Direction of the Engineer in charge.

Supplying, fitting and fixing vitrifed tile of size 600mm x 600mm plain Ivory of premium grade in floors conforming to IS 13755 laid on 20mm thick cement mortar(1:4) and filling joints with white cement of approved quality including cost of all materials, labour T&P,Conveyence etc . complete required for the work as per the direction of engineer-in-charge.

Supplying, fitting and fixing tiles in dados, skirting and risers of Steps on 12mm thick cement paster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing including cost of precast tiles, labour T&P,Conveyence etc . complete required for the work as per the direction of engineer-in-charge. a.Vitrified tiles size 60cm x 60cm plain (Ivory)

Painting 1 coats with approved cement primer on plastered surface (water bound) to after cleaning the surface including cost of conveyence and taxes of all materials including the cost of primer labour and T & P etc required for the work all complete in all respect as per direction of Engineer in charge. A)Internal Walls

B) External Walls

C) Ceiling

Finishing surface of walls with cement based wall putty (water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials labour T & P etc. as per direction of Engineer -In -charge. A) Internal Walls

B) Ceiling

Painting 1 coats with approved Plastic emulsion Paint of approved shades on new work to give even shade including cost of paint, cost of labour and T & P etc required for the work all complete in all respect as per direction of Engineer in charge.

Painting 1 coats to outside surface of walls etc approved shade and colour using weather coat to the surface after cleaning, including cost of conveyence and taxes of all materials including the cost of weather coat labour and T & P etc required for the work all complete in all respect as per direction of Engineer in charge.

Priming one coat with approved Red Oxide Primer on M.S. Grills in Windows, Rolling Shutters.

Painting two coats with approved Enamel Paint including cost of paint.

Supplying and fixing Rolling shutters of approved make, made of required size M.S laths inter locked together through their entire length and jointed together at ythe end by end locks mounted on the specially designed pipes shaft with brakets,side guides and arrangements for inside and outside locking with push and pill operation complete including the cost of providing and fixing necessary 27.5 cm long wire springs , garde no-2 and M.S top cover of required thickess for rolling shutter. all complete in all aspect as per the direction of the Engineer in charge. (80x1.25 mm M.S laths with 1.25 mm thuck top cover including providing and fixing of ball bearing for Rolling shutters as required including all cost, conveyence taxes , labour, T & P required for the work complete in all respect as per direction of Engineer in charge.

Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in staircase as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect.

Supplying , fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures.

Supplying, fitting and fixing of 5.5 mm thick hexagoanal Aluminum jally in windows as single groove, double groove and tapered clip as horizontal and vertical members for fixing of aluminum jally and jointing angle conforming to standard Aluminium sections etc. complete.

Supplying , fitting and fixing of openable UPVC doors with door frame of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures.

KALYAN MANDAP (FIRST FLOOR) R.C.C. works (M-25) in columns, roof beams,lintel band, roofs, chhajas mass concrete etc. using 10 mm & 20 mm size black hard granite crusher broken chips including hoisting, lowering, laying and compacting, watering, curing for 28 days including centering and shuttering and finished the exposed surface smooth including all cost, conveyances, royalties and taxes of all materials and cost of labour with T & P required for the work etc. all complete in all respect but excluding cost of Steel and labour charges for bending and binding as per the Direction of the Engineer in charge. A)ALL KINDS OF BEAMS AND COLUMN

B) F.F SLAB,LANDING AND CHAJJA

C) LINTEL BAND

Supplying, fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specifications.

Supplying and fixing Colour Coated G.C.I. Sheet (0.4mm thk.) of any approved make in roof drilling hole in wind ties including fixing of ridges valleys wind ties etc. ,including cost of fitting, conveyances, T&P, etc.

Supplying, hoisting joists and trusses and placing in position

Fly Ash. Brick masonry using Fly Ash. Bricks having crushing strength not less than 75 Kg. / cm2 in cement mortar (1:4) after immersing the brick for six hours in water before use in "superstructure" including splays, cutting circular moulding, corbelling, chamfering and similar such type of works, watering & curing including cost, conveyances, royalties taxes of all materials and cost of all labour with T & P required for the work etc. all complete in all respect as per the Direction of Engineer in charge.

12mm thick cement plaster (1:6) inside over brick massonary after racking out the joints watering and curing etc. complete with cost, conveyance royalties and taxes of all materials & all labour with T & P required for the work etc. all complete in all respect as per the Direction of the Engineer in charge.

16mm thick cement plaster (1:6) outside over brick walls in all floors after racking out joints including watering & curing etc. complete with cost, conveyance royalties & taxes of all materials & cost of all labour with T & P required for the work etc. all complete in all respect as per the Direction of the Engineer in charge.

6 mm thick cement plaster (1:4) ceiling including watering & curing etc. complete with cost, conveyance royalties & taxes of all materials & cost of all labour with T & P required for the work etc. all complete in all respect as per the Direction of the Engineer in charge.

Supplying, fitting and fixing vitrifed tile of size 600mm x 600mm PREMIUM GRADE PLAIN IVORY in floors conforming to IS 13755 laid on 20mm thick cement mortar(1:4) and filling joints with white cement of approved quality including cost of all materials, labour T&P,Conveyence etc . complete required for the work as per the direction of engineer-in-charge. a.Vitrified tiles size 60cm x 60cm plain (Ivory)

Supplying, fitting and fixing tiles in dados, skirting and risers of Steps on 12mm thick cement paster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing including cost of precast tiles, labour T&P,Conveyence etc . complete required for the work as per the direction of engineer-in-charge. a.Vitrified tiles size 60cm x 60cm plain (Ivory)

Painting 1 coats with approved cement primer on plastered surface (water bound) to after cleaning the surface including cost of conveyence and taxes of all materials including the cost of primer labour and T & P etc required for the work all complete in all respect as per direction of Engineer in charge. A)Quantity referred from Inside plaster 12 mm thick

b) Quantity referred from Outside plaster 16 mm thick

c) Quantity referred from Celing plaster 6 mm thick

Finishing surface of walls with cement based wall putty (water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials labour T & P etc. as per direction of Engineer -In -charge. A)Quantity referred from Inside plaster 12 mm thick

Quantity referred from Celing plaster 6 mm thick

Wall painting 2 coats with plastic emusion paint of approved shade on new work to give an even shade including the cost of paint. A) Quantity referred from Inside plaster 12 mm thick

Painting 1 coats to outside surface of walls etc approved shade and colour using weather coat to the surface after cleaning, including cost of conveyence and taxes of all materials including the cost of weather coat labour and T & P etc required for the work all complete in all respect as per direction of Engineer in charge. A) Quantity referred from Outside plaster 16 mm thick

Priming one coat with approved Red Oxide Primer on M.S. Grills in Windows, Rolling Shutters.

Painting two coats with approved Enamel Paint including cost of paint.

Supplying and fixing Rolling shutters of approved make, made of required size M.S laths inter locked together through their entire length and jointed together at ythe end by end locks mounted on the specially designed pipes shaft with brakets,side guides and arrangements for inside and outside locking with push and pill operation complete including the cost of providing and fixing necessary 27.5 cm long wire springs , garde no-2 and M.S top cover of required thickess for rolling shutter. all complete in all aspect as per the direction of the Engineer in charge. (80x1.25 mm M.S laths with 1.25 mm thuck top cover including providing and fixing of ball bearing for Rolling shutters as required including all cost, conveyence taxes , labour, T & P required for the work complete in all respect as per direction of Engineer in charge.

Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in staircase as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect.

Supplying , fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures.

Supplying, fitting and fixing of 5.5 mm thick hexagoanal Aluminum jally in windows as single groove, double groove and tapered clip as horizontal and vertical members for fixing of aluminum jally and jointing angle conforming to standard Aluminium sections etc. complete.

Supplying , fitting and fixing of openable UPVC doors with door frame of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures.

C) ELECTRIFICATION WORK of Kalyan mandap

D)-WORKS-FIRST FLOOR Fixing Wash Down Water Closet (European type W.C pan) with integral ‘S’ or ‘P’ trap conforming to IS 2556 : Part 8-2004, to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification. (Seat and cover to be measured and paid separetely.

Fixing bowl pattern urinal conforming to IS 2556 : Part 6-1996 including connecting the urinal of 430x260x350 mm sizes respectively with waste pipe by means of white lead mixed with chopped hemp etc all complete as per specification.

Fixing water closet (Orissa type sqatting pan) Pocelain 23' I.W.C. embeded in cement concrete (1:4:8) all complete as perf specification

Fixing manual flushing cistern with a pair of Cast Iron or M.S brackets complete with fittings including Cast iron siphonic apparatus, mosquito proof lead, chromium plated brass couplings for connections with inlet, outlet and overflow pipes, making connection with suply main with 12mm dia pvc inlet pipe including cutting holes and making good the same all complete as per specification.

Fixing Counter top basin 450 x 300 mm size wash basins with hole for pillar taps conforming to IS 2556 : Part 4-2004 with Cast Iron or M S brackets painted white including cutting holes in walls and making good the damages etc all complete as per specification.

Fixing PVC Waste pipe of the following diameter for Wash Basin and Sink including brass check nut etc complete as per specification. 32mm dia

Fixing cp brass Waste coupling of following diameter for wash basin/Sink including brass check nut etc complete as per specification. i) 32mm dia

Fixing 15mm dia CP Brass Short Body Bib Cock with long screws, shanks and back nuts of the following nominal bore as per specification.

Fixing of 15mm C.P brass Angular Stop Cock conforming to IS781/1995 of following nominal sizes as per specification.

Fixing 15mm X 300mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin complete as per specification.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge.Concealed work, including cutting chases and making good the wall etc. i)15 mm nominal dia

ii)20 mm nominal dia

iii)25 mm nominal dia

iv)32 mm nominal dia

v)40 mm nominal dia

Providing and fixing of Brass or Gun metal Full Way valve conforming to IS :71-1995 of the following nominalsized with wheel as per specification complete. i)25mm

Providing and fixing to wall or ceiling and floor rigid UPVC pipes class IV (8 kgf/cm²)/class III (6kgf/cm²) conforming to IS:4985/2000 and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification. i)50 mm

Providing and fixing on wall face unplasticised Rigid PVC soil, waste and rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion, (i)single socketed. i) Rain water pipe 160mm

ii) Waste water pipe160mm

iii) Soil pipe 160mm

Cutting holes through existing brick work including making good the same in cement mortar (1:4) for taking GI/PVC pipes and fittings etc all complete as per specification.

Cutting hole in RCC floors and roofs upto 19cm thick for pssing G.I / P.V.C pipes and fittings etc and repairing the holes after insertion of pipe etc with cement concrete (1:2:4:) including finishing complete so as to make it leak proof.

Cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per specification complete.

C.P. Grating

E) PH WORKS-FIRST FLOOR Fixing Wash Down Water Closet (European type W.C pan) with integral ‘S’ or ‘P’ trap conforming to IS 2556 : Part 8-2004, to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification. (Seat and cover to be measured and paid separetely.

Fixing bowl pattern urinal conforming to IS 2556 : Part 6-1996 including connecting the urinal of 430x260x350 mm sizes respectively with waste pipe by means of white lead mixed with chopped hemp etc all complete as per specification.

Fixing water closet (Orissa type sqatting pan) Pocelain 23' I.W.C. embeded in cement concrete (1:4:8) all complete as perf specification

Fixing manual flushing cistern with a pair of Cast Iron or M.S brackets complete with fittings including Cast iron siphonic apparatus, mosquito proof lead, chromium plated brass couplings for connections with inlet, outlet and overflow pipes, making connection with suply main with 12mm dia pvc inlet pipe including cutting holes and making good the same all complete as per specification.

Fixing Counter top basin 450 x 300 mm size wash basins with hole for pillar taps conforming to IS 2556 : Part 4-2004 with Cast Iron or M S brackets painted white including cutting holes in walls and making good the damages etc all complete as per specification.

Fixing PVC Waste pipe of the following diameter for Wash Basin and Sink including brass check nut etc complete as per specification. 32mm dia

Fixing cp brass Waste coupling of following diameter for wash basin/Sink including brass check nut etc complete as per specification. i) 32mm dia

Fixing 15mm dia CP Brass Short Body Bib Cock with long screws, shanks and back nuts of the following nominal bore as per specification.

Fixing of 15mm C.P brass Angular Stop Cock conforming to IS781/1995 of following nominal sizes as per specification.

Fixing 15mm X 300mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin complete as per specification.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge.Concealed work, including cutting chases and making good the wall etc. i)15 mm nominal dia

ii)20 mm nominal dia

iii)25 mm nominal dia

iv)32 mm nominal dia

v)40 mm nominal dia

Providing and fixing of Brass or Gun metal Full Way valve conforming to IS :71-1995 of the following nominalsized with wheel as per specification complete. i)25mm

Providing and fixing to wall or ceiling and floor rigid UPVC pipes class IV (8 kgf/cm²)/class III (6kgf/cm²) conforming to IS:4985/2000 and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification. i)50 mm

Providing and fixing on wall face unplasticised Rigid PVC soil, waste and rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion, (i)single socketed. i) Rain water pipe 160mm

ii) Waste water pipe160mm

iii) Soil pipe 160mm

Cutting holes through existing brick work including making good the same in cement mortar (1:4) for taking GI/PVC pipes and fittings etc all complete as per specification.

Cutting hole in RCC floors and roofs upto 19cm thick for pssing G.I / P.V.C pipes and fittings etc and repairing the holes after insertion of pipe etc with cement concrete (1:2:4:) including finishing complete so as to make it leak proof.

Cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per specification complete.

C.P. Grating

F) SEPTIC TANK (50 USERS) Earth work in hard soil or gravelly soil within 50m. Initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per the direction of the Engineer-in-charge.

1st additional depth above initial lift of 1.50Mtr.

Filling in F&P with sand, well watered and rammed, all complete.

Cement Concrete (1:3:6) with 40mm HG metal complete

Fly-ash Brick masonry in cement mortar (1:4) in F&P complete.

16mm thick Cement Plaster ( 1 : 6 ) inside with punning complete.

12mm thick Cement Plaster ( 1 : 6 ) in outside complete.

R.C.C. works (M-25) in foundation, footing, beams,plinth band,footing,base of columns,lintels, roofs, chhajas mass concrete etc. using 10 mm & 20 mm size black hard granite crusher broken chips including hoisting, lowering, laying and compacting, watering, curing for 28 days including centering and shuttering and finished the exposed surface smooth including all cost, conveyances, royalties and taxes of all materials and cost of labour with T & P required for the work etc. all complete in all respect but excluding cost of Steel and labour charges for bending and binding as per the Direction of the Engineer in charge.

Centring & shuttering for RCC work all complete A)SLAB

B) T-BEAM

C) BAFFLE WALL

Supplying, fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specifications.

Cement Concrete ( 1 : 2 : 4 ) with 12mm size HG chips all complete

Fitting & fixing of M.S. Step Iron built in wall complete

Commissioning of Septic tank with charge full water

Please Enable Macros to View BoQ information