PROVN OF 02X TOILET BLOCK EACH COMPRISING OF 06XTOILET AND 06X BATHROOM FOR OTHER RANK LINES AND CERTAIN REVENUE WORKS AT VARIOUS AREA AT MIL STN POKARAN UNDER AGE (I) POKARAN

Amount

Surface excavation n exc 30 Cm and average 15 Cm deep and getting out in soft soil.

Excavation in trenches not exc 1.5m wide and n. exc 1.5M deep for fdn / trenches and getting out for soft / loose soil.

Excavating in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre depth for foundation, etc or for shafts, manholes not exceding 10.0 Sqm on plan and not exceeding 1.5 metre in depth in any type of soil and getting out.

Excavating over areas, n exc 1.5 m deep and getting out any type of Soil

Excavating over areas, exc 1.5 m deep n exc 3.m deep and getting out any type of Soil

Returning filling in soil including spreading, levelling and well ramming in layers n.exc 25cm thick in layer etc all complete.

Removing excavated material to a distance exc 100 mtrs but not exc 250 Mtrs and depositing where directed.

Removing excavated material n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point

M&L for sand cushioning to PVC cable with tibba sand and punning to provide required cover all as directed.

M&L for PCC ( 1:4:8) Type D-2 using 40 mm graded aggregate as in fdn

M&L For Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick spread, levelled and rammed including watering

Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L for 75mm thick PCC 1:4:8 Type D-2 using 40mm graded stone aggregate as in sub bases all as specified.

M&L for squared rubble walling, Jodhpur type, brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar (1:6) all as specified & directed by Engineer-in-charge.

M&L for squared rubble walling, Jodhpur type, brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar (1:4) all as specified & directed by Engineer-in-charge.

PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in coping etc and like, including weathering, slightly rounded or chamfered angles and throating as directed with and includings necessary fro work complete.

Cement concrete ( 1:2:4) type B-1 using 20mm graded stone aggregate as in surface channels & drains etc.

Extra over stone walling for hammer dressing to face stones with maximum depression on face from a straight edge not exceeding 20mm & dressing face beds and joints as specified to squared rubble walling Jodhpur type brought up to courses all as specified & directed by Engineer-in-Charge.

Extra over for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement, including form, moulds, mitered/stopped ends etc.

M&L for Brickwork with flyash bricks,modular size, straight or curved on plan to any radius in half brick thick walls built in CM 1:6

M&L Rendering 10mm thick on fair faces of brick work or concrete surfacesin CM 1:6, Surface finished even and fair w/o using extra cement

M&L rendering 15mm thick in 1:6 cement plaster on stone masonary surface is to be finished even and smooth (without using extra cement) complete all as specified and directed.

M&L rendering 15mm thick in 1:4 cement plaster on of stone masonary surface is to be finished even and smooth (without using extra cement) complete all as specified and directed.

M&L preparation of new wall surface and applying two coats of distemper oil emulsion over a coat of alkali resistant primer,including one coat of 3mm thick wall care putty on wall complete all as specified and directeded.

M&L for preparation of new plastered surfaces as in ceilings, applying 3 coats of white wash complete.

M&L for applying two coats of cement base paint over a coat of primer on newly plastered surfaces of walls including preparation of surfaces complete.

M&L for preparation surfaces (external faces) of wall any applying two coats of external weather proof paint of Apex or equivalent over a coat of primer (self Coat) all as per manufacturers instructions and all as specified and directed by Engineer-in-charge.

S&F for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 as in post, strut, purlins & wind ties with (MS flat iron filler, MS plate & angle iron) neccessary cutting, drilling, welding, bolting or riveting etc including embeding in cocncrete complete all as specified and directed by Engineer-in-charge.

S&F for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

M & L for machine cut kota stone slab flooring 20mm to 25 mm thick laid over cement screed bed jointed & pointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing & mirror polishing including over a screed bed or bedding layer of 15mm thick in CM 1:6 for laying floor finishes all as specified.

M&L for machine cut kota stone slab 20-25mm thick as in skirting & dado and laid over cement screed and jointed with pigment to match the shade of the slab including rubbing and polishing complete over and including 10 mm thick backing coat in CM (1:4) complete all as directed by Engineer-in-charge.

S&F for Joist, channel, angle, or tee sections, fixed independently, without connection plate, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated), Fe 410-W (Gde E-250) quality A

M&L for jodhpur stone roof slabs, self faced 7.5cm to 10cm thick, 25cm to 35cm wide, hoisted, set, jointed and grouted in lime mortar 1:3 or cement mortar 1:6 complete complete all as specified and as directed by the Engineer-in-Charge

M&L for Flush Pointing single joints in brickwork or masonry in detached work, flashings, etc. on ceiling in CM (1:4) complete all as specified & directed.

M&L for PCC 1:2:4 type BO using 12.5 mm graded stone aggregate for levelling course for consolidated thickness shall be varied from 25 to 85 mm as per the requirements all as directed by Engr-in-Charge.

M&L rendering 15mm thick in 1:4 cement plaster on roof surface by using WPC Compund and surface finished even and smooth complete all as specified and directed.

Supply only integral water proofing compound.(ISI Marked)

M&L for APP based polymeric membrane minimum weighing 3 Kg/Sqm and minimum 3mm thick reinforced with polyester non wove fabric (wt not less than 150 gms/sqm) laid over primed surface including bituminous primer conforming to IS-3384 applied @ 0.3 Ltr/Sqm by forced all as specified and as directed

S&F for Non- skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with screed bed 15 mm thick CM 1:6 complete all as specified & directed

S&F glazed ceramic tiles size 350x250x7mm /450x350x7 mm thick on vertical surfaces, set & joined in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including backing coat of 10mm thick in CM (1:4) all as specified & directed by Engineer-in-charge.

S&F PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per Engr - in - charge.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suplying & fixing in the frame at site as per directed by Engr - in- charge.

S & F, 35 mm thick second class hard wood factory made plain, framed, panelled shutters (Two panels), with lock rail and panel of 9mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and Style as per IS:1003 (Part-1), kiln seasoned and chemically pressure treated all as specified & directed by Engineer-in-charge.

S&F, 100mm size, butt hinges, medium weight, cold rolled mild steel including necessary welding if required all as specified & directed by Engineer-in-charge.

S&F Aluminium anodised, barrel tower bolt of extruded section and fix of length 125mm

S&F Aluminium handles, cast type, anodised of size 150mm long.

Anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

S&F Factory made Box Type steel window with side hung shutters including projecting type hinges with steel handle, and steel peg stay , complete with glazing bars, dovetailed or complete as shown in Drawing No. CEJZ/TD/22 sh 1/1 to 1/3, and all as specified & directed by Engineer-in-Charge.

S&F 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S&F plain sheet glass of 4 mm thick ordinary quality and glazing with oil putty and clips in squares not exceeding 0.50 Sqm in each pane complete all as directed by Engr-in-charge.

S&F figured glass, pin head type & glazing with oil putty in square n exc 0.5 sqm in each pane 3 mm thick

M&L for roughly squared stone 5cm thick as in lintels n exc 3m in length, hammer dressed on face and soffits, hoisted, set and pointed in lime mortar 1:3 or cement mortar 1:6 complete all as specified and as directed by the Engineer-in-Charge

M&L for 5cm sand stone slabs in sunshades, chajjas, shelves, cills, landings, cover stones, templates etc, n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in lime mortar 1:2 or cement mortar 1:4, complete complete all as specified and as directed by the Engineer-in-Charge

M&L for 50 mm thick PCC (1:3:6) type C-1 using 20 mm graded stone aggregate laid in alternative bays as in plinth protection including finishing the surface even & fair & filling the joints with mastic filling i.e one part of bitumen 85/25&3 parts of sand by weight all as specified and directed by Engr-in-charge

Supply and fix rotational moulded polyethylene water storage tanks ( cylindrical vertical with closed top ) hoisted and fixed in position all as specified in SSR part-I ,1000 ltr capacity

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth

S&F Medium grade GI tubing 15 mm bore with all fittings , to walls, ceiling or laid in floors etc.

S&F Medium grade GI tubing 20 mm bore with all fittings , to walls, ceiling or laid in floors etc.

S&F gun metal globe or gate valves with iron wheel head screwed both end for iron pipe and fixed to 15 mm bore pipe.

S&F gun metal globe or gate valves with iron wheel head screwed both end for iron pipe and fixed to 20 mm bore pipe.

S&F Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms/20mm-112gms) fixed 15 mm bore

S&F Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm 90gms/20mm-125gms) fixed 15 mm bore

S&F Viterious china White Wash Hand Basin of size 450mm x300mm fixed includign 15 mm PTMT pillar cock , 15mm PTMT Stop cock, 32 mm brase CP waste fitting, & 15 mm PTMT connection pipe 450 mm long

S& F Soap dish, any type, fixed to plugs with chromium plated brass screws

S&F towel rail 600 mm long of Brass C.P 'D' type fixed with and including chromium plated brass screws and wooden /plastic cheats

S&F CP Shower rose 125mm size with swivel joint including fixing sted pipe for union.

S&F for European type water closet,including plastic seat cover white, closed pattern with flat bottom and mild steel chromium plated or aluminium hinging device including Flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern complete.

S&F for vitreous China squatting pan, `Orissa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe)

S&F PVC connections 15 mm size with PTMT nuts to length 450 mm

S&F PVC flushing cistarn 10 ltrs capacity ISI marked incl PVC damtake pipe PVC 450mm inlet etc all complete .

Cutting holes in to or through in brick or stone walls built in cement mortar and making good in CM 1:3 or cement concrete 1:2:4 type B1 as required, exc 150sqcm & n exc 400 sqcm complete all as specified and directed,

PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm dia out let

S&F PVC (SWR) pipes of 110 mm dia, single socketed fixed to walls

S&F PVC (SWR) pipes of 75 mm dia, single socket fixed to walls

S&F 100 bore of pipe stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof.

S&F PVC (SWR) bends with access door of 110 mm dia, any radius

S&F PVC(SWR) bends with access door of 75 mm dia, any radius

S&F PVC (SWR) bends of 110 mm dia, any radius

S&F PVC (SWR) bends of 75mm dia, any radius

S&F (PVC (SWR) vent cowl, 100 mm dia

S&F Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe Fe 290 Gde E-165

Material and labour for Granite(of any type) 18 to 20 mm thick work (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platfoRms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade

M&L for reinforced concrete NP2 drain pipes 150 mm dia confirming to IS laid in trenches and jointed in CM 1:2 all as specified & directed by EIC

M&L for Concrete bed to drain pipes including packing under und haunching against the sides of pipes after they are laid and tested in PCC 1:4:8 type D-2 for 150mm bore pipe.

M&L for point wiring with PVC unsheathed cable single core stranded copper conductor 1.5 sq mm size, 1100 V grade, drawn into concealed conduit medium grade (ISI marked) not less than 20mm dia on surface with and including PVC unsheathed cable single core copper conductor 1.5 Sq mm as continuous earth wire and including pressed MS sheet sunk in box 1.12 mm thick with 2.8 mm thick laminated bakelite sheet all as specified & directed by Engr-in-charge for the following :-

One light/fan/Exh point controlled by one switch 5 Amp one way

Socket outlet 3pin 5 amps same board

M & L for Point wiring using colour coding as per IS with 1.5 Sq mm multistranded copper conductor single core FRLS PVC insulated unsheathed 1100 Volts, ISI-694 marked drawn through and including heavy duty ISI marked PVC Cassing capping alongwith its accessories of suitable size, with GI sunken boxes of 1.12 mm thick, 60 mm depth of suitable size including fixing/ grouting sunken as per site requirement and making good to match with existing finishes including provision of cover with white colour hylum sheet of 2.8 mm thickness switches/ sockets/ regulators etc including running up of 1.5 Sq mm copper conductor FRLS, PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly all as specified for the following :

One 3/5 pin 5 amps socket point on independent board

Supply and Fix switch piano type single pole one way 5 Amp

Supply and Fix sockets outlet 2 in 1, 3 Pin, 5 Amp

S&F sheet metal enclosure DB's 240 Volts, IP-43, suitable for mounting MCB's, SPN, 4 way with 200 Amps rated copper bus bar double door type complete all as directed by Engineer-in-charge.

S&F MCB SPN 240 volts of capacity 40 Amps complete all as directed.

Supply and fixing MCB's single pole 5 Amps to 40 Amps, 240 Volts.

S & F 10 watts white battern LED mirror light fitting provided with high output diffuser size of Two feet 230 volt,50 Hz Make- Bajaj/Havells/CG/Philips

S & F LED tube fixture/fitting 1x 20watt, decorative ultra slim square profile with extruded polycarbonate, environmental friendly, energy eficient ready to use prewired for including connecting up with twin core twisted flexible copper conductor cable with suitable size complete and all as specified and directed by Engineer- in Charge.”. Make: Havells/Philips/Bajaj/CG.

Supply and laying Jodhpur stone patti for cable protection of lenth between 55 to 60 cm but width between 25 to 30 cm thicknes not less than 5 cm complete as per site requirement incl removing old unsv patti and direction of engineer in charge.

Supply and Laying in trenches/through pipes/ducts or on poles/walls jointing to O/H conductor, LT panels, main switch with cable size aluminum lugs and testing. XLPE insulated, armoured heavy duty electric cables with aluminum conductor, 1100 volt grade, all as specified directed by Engineer In charge of cross sectional area of 10 Sqmm 2 core

Fixing only wall mounted fans 400mm sweep high speed and 50 Hz, 230 voltssingle phase blades with silent operation all as specified and directed by Engineer In charge

M & L for earthing complete with galvanized steel earth plate electrode 600x600x6.3 mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less 1.5 mtr deep below normal ground level connected to GI earth wire 4 mm dia connected to earth plate by means of nut, bolts, check nut & washer of galvanized iron or of steel, GI earth wire will be protected by 15 mm dia GI pipe 'light grade', watering pipe 20 mm dia GI 'light grade', GI wire meshed funnel, alternate layer of char coal and salt on all side to earth plate upto thickness of 150 mm, filling of black cotton soil in earth pit upto ground level, PCC chamber recessed for and including RCC cover including all necessary excavation & earth work, earth wire connected to O/H continious earth wire on pole, testing the earthing after completion all as specified and shown in electric plate No 5 of MES SSR Part-I 1991 print and as directed .

M/s Shri Inder Construction Company