Loading…
Loading…
Updated dates
Tender Value
₹25.0 L
EMD Value
₹18,751
Closing Date
10 Jun 2026, 6:00 pm4d left
CEO
BHOPAL SMART CITY DEVELOPMENT CORPORATION LIMIITED
Design, Supply, Installation, Testing AND Commissioning of 1 Nos of 125 KVA DG Sets and its associated works along with two years Defect Liability Period at Government Housing Phase I under Area Based Development Bhopal Smart City (Second Call)
2026_UAD_495027_2
MPBSCDCL /TENDER NO- 317
Open Tender
Electrical Works
180 days
Government Housing Phase-I under Area Based Develo
Please refer Tender Document
3 documents required · 3 mandatory
₹5,000
₹18,751
BHOPAL SMART CITY DEVELOPMENT CORPORATION LIMIITED
20 May 2026
20 May 2026
11 Jun 2026
20 May 2026
10 Jun 2026
20 May 2026
26 May 2026
“Design, Supply, Installation, Testing & Commissioning of 1 Nos of 125 KVA DG Sets and its associated works along with two years Defect Liability Period at Government Housing Phase-I under Area Based Development-Bhopal Smart City” (Second Call)
Financial Bid Sheet-Revision001
Name of the Bidder
Sr. No. Sub-Head Section / Discipline Amount in Rs.
1 SH - I Civil/Electrical Works
2 SH_II DG set Work
"Instructions to the Bidder"
1 Bidder can qoute there rates in the highlighted yellow spaces provided
2 Bidder should write name of his firm/company in the highlighted yellow space provided
3 Rates should be qouted including all the taxes and excluding GST.
4 Bidder should qoute rate in DSR sheet on % basis and in NON SOR the rate should be qouted item wise
5 If any Bidding sheet or Bidding Excel cell is left empty then it will be considered as zero (zero rupees)
NAME OF BIDDER-
Sr. No. UADD 2021 SOR Item No. Items/particulars Unit Rate Quantity Amount Quote should be in percentage higher or below on the SOR Rates the same is to quoted in the form of decimal only. (For example if contractor wants to quote 5 percent higher than he have to quote 1.05 and if he wants to quote 5 percent below he have to quote 0.95 and so on....)
SUB HEAD - I- Civil/Electrical Works
2 LV Cable & Termination arrangment
2.1 Uadd_14.1 Supply of XLPE insulated power cable (conforming IS-7098 Part-I) 1100 Volt grade, 1 core/2 core/3½ core/4 core ISI marked with alu. stranded /solid conductor
14.1 1 2.5 Sq.mm.(Heavy Duty) mtr 43 50
2.1.1 uadd_14.1.8 4 core armoured
2.1.1.1 6 50 Sq.mm(XLPE) mtr 242 200
2.2 Uadd_14.6.1 Compressed Gland Supplying and fixing heavy duty cable gland for P.V.C. insulated armoured cable with brass washer,Rubberring complete erected with cable and lead connectionetc.asper specification complete.
14.6.1 1 Gland Size 22mm suitable for cable 2,3,3½ & 4 x upto 6 Sq.mm Each 32 17
2.2.1 6 Gland Size 45mm suitable for cable 3/3½ x 120 Sq.mm OR3½ x 95 Sq.mm OR 3 x 150 Sq.mm. Each 131 25
2.2.2 7 Gland Size 50 mm suitable for cable 3½ x 150 Sq.mm OR3 x 185 Sq.mm Each 167 25
2.2.3 4 Gland size 32mm suitable for cable 2,3, 3½ x 50 Sq.mm. Each 70 25
2.3 uadd 14.8 Lugs Supplying and fixing cramping type Alum.lugs as per I.S.S Specification suitable for following size of cable with Alu. /Copper solid/stranded conductor evently cramped with high/pressure tool and connected to switchgear/Bus/M.C.C.B./M.C.B.etc .asrequired complete.For Conductor Size-
3 Uadd_17.4 Supplying and installing Double wall corrugated pipes(DWC) of HDPE (IS14930 PartII-marked) for cable laid underground with necessary connecting sockets/couplings,tees of same material and a trequired depth up to 90cm.below road/ground surface,including excavation,back filling with excavated material with ramming and making the surface good.
9 175.00mm outside dia. MTR 375 150
5 Earthing & Earthing Conductor
5.1 uadd_11.4 Earthing with copper earth plate 600x600x3 mm (For, DG Set Neutral) Earthing with copper earth plate 600mm X 600mm X 3mm thick including accessories and providing masonry encloser in cement mortar, cover plate having locking arrangement on the top and G.I. watering pipe 20mm dia 2.7 metre long etc. (but without charcoal or coke and salt) complete as required Each 7064 17
5.2 uadd_11.3 Earthing with G.I. earth plate 600x600x6 mm (For, DG Set Body & Panel ) Earthing with G.I. earth plate 600mm X 600mm X 6mm thick including accessories and providing masonry encloser in cement mortar, cover plate having locking arrangement on the top and G.I. watering pipe 20mm dia 2.7 metre long etc. (but without charcoal or coke and salt) complete as required Each 2439 15
5.3 uadd_11.9 Supply and laying 25mm X 6mm G.I. strip at 0.5 metre below ground level/surface as strip earth electrode including jointing etc. as required. mtr 69 1000
1 uadd-2.5 Earth work in excavation/ by mechanical means (Hydraulic Excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottom disposal of excavated earth, lead up to 50 m and liftup to 1.5 m, disposed earth to be levelled and neatly dressed.
uadd 2.5.1 All kinds of soil Sqm 38 29
1.1 uadd-2.6.2 Ordinary rock cum 261 35
2 uadd-2.16 Filling available excavated earth (excluding hard rock/Ordinary rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum 89 72
SUB HEAD - II CONCRTE WORKS
3 uadd-4.1 Providing and laying in position Cement Concrete of specified grade excluding the cost of centering and shuttering- All work upto plinth level.
4.1.1 Cement concrete grade M-25 (Nominal Mix) with 20 mm maximum size of stone aggregate Cum 5647 19
4 uadd_19.1 Centering and shuttering including strutting, propping etc. and removal of form work for :
uadd 19.1.1 Foundations, footings, bases of columns, etc. For mass concrete sqm 160 20
4.1 uadd_19.1.1 Foundations,footings,bases of columns, etc. for concrete upto plinth level. sqm 160 22
RCC M-20 Grade Concrete
5 uadd_5.1 Providing and laying in postion specified grade of reinforced cement concrete (with 20mm nominal size of aggregate) excluding the cost of centerining ,shuttering, finishing and reinforcement All work upto Plinth
5.1 uadd_5.1.1 Cement concrete grade M-20 (Nominal Mix) with 20 mm maximum size of stone aggregate. cum 5435 15
6 uadd_5.11 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
6.1 uadd_5.11.4 Thermo-Mechanically Treated bars of grade Fe-500D or more kg 58 1000
NAME OF BIDDER-
Sr. No. UADD 2021 SOR Item No. Items/particulars Unit Rate Quantity Amount Quote should be in percentage higher or below on the SOR Rates the same is to quoted in the form of decimal only. (For example if contractor wants to quote 5 percent higher than he have to quote 1.05 and if he wants to quote 5 percent below he have to quote 0.95 and so on....)
SUB HEAD -II DG Set
1.1 48.1.13 Supply, installation, testing and commissioning of diesel generating set three phase, Water Cooled with AMF control panel, 125 KVA, 415V, with electronic governor. Each 1533341 1 1
3.1 MPPWD 2022_4.1.1.4 Concrete of M10 grade Nominal (Mix-1 cement:3 sand:6 graded stone aggregate) cum 3890 6
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.31 MB
rfpsecondcall.pdf
Tender Documents • 1.46 MB
BOQ.xls
Other Document • 0.04 MB
Download all tender documents and submit your bid