Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.7 LAccepted-AOC NO 1 4 56 Y SRI BHARATHI NAGAR OPP PARVATHI THEATER CUMBUM ROAD THENKARAI PERIYAKULAM THENI DT 625 601 | PERIYAKULAM | THENI | TAMIL NADU | 625601 | L1 | Accepted-AOC Being Lowest Bidder (L1) | |
| 2 | L2₹15.2 L+₹24,225 (1.62%)Rejected-Finance | L2 | Rejected-Finance Not being L1 Bidder | |
| 3 | L3₹15.4 L+₹47,180 (3.15%)Rejected-Finance | L3 | Rejected-Finance Not being L1 Bidder | |
| 4 | L4₹23.3 L+₹8.3 L (55.6%)Rejected-Finance | L4 | Rejected-Finance Not being L1 Bidder |
| Sl No | Description | Qty | Unit | Global Furnisherts L2 | Vivek Engineers L3 | PRIYADARSHINI CONSTRUCTIONS L1 | Annu Enterprises L4 |
|---|---|---|---|---|---|---|---|
| 1.00 | NOTE FOR ALL ITEMS : (i)Removal of following existing unserviceable components of various furniture items carefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components / discorded components as mentioned including tightening the joints, placing every part in-tact as applicable as per drgs.
(ii Work will be executed where the furniture exist in different User Units of GE (Central)Bangalore including BSO's Furniture Yard as directed by Engineer-in-Charge. ADOUBLE BUNK CHARPOY WITH PLY TOP
(a) Removing the existing upper unserviceable any type and size of plywood top and supply and fix new 12mm thick Plywood, 7 Ply, commercial type, BWR, exterior grade (water proof), ISI marked, of size 1980 mm x 900 mm in single piece (make KitPly, CenturyPly, Greenply) as shown on drawings & as directed. | 100 | Each | 1,300 ₹1,30,000 | 1,323 ₹1,32,300 | 1,250 ₹1,25,000 Lowest | 1,800 ₹1,80,000 |
| 2.00 | (b) Removing the existing bottom unserviceable any type and size of plywood top and supply and fix ew 12mm thick Plywood, 7 Ply, commercial type, BWR, exterior grade (water proof), ISI marked, of size 1980 mm x 900 mm in single piece (make KitPly, CenturyPly, Greenply) as shown on drawings & as directed. | 100 | Each | 1,300 ₹1,30,000 | 1,323 ₹1,32,300 | 1,250 ₹1,25,000 Lowest | 1,800 ₹1,80,000 |
| 3.00 | (c) Removing the existing rectangular MS tubes long rails and supply & fix 60 x 25mm rectangular MS tubes long rails proper welded including cuting & threading where required of sorts all as per drawing including painting the affected portion with two coats of synthetic enamel paint over a coat of red oxide primer complete to the satisfaction of Engineer-in-charge . | 110 | Each | 120 ₹13,200 Lowest | 414 ₹45,540 | 300 ₹33,000 | 600 ₹66,000 |
| 4.00 | (d) Removing the existing upper unserviceable rectangular MS tubes short rails and Supply & fix 60 x 25mm rectangular MS tubes short rails and proper welded including cuting & threading where required of sorts all as per drawing including painting the affected portion with two coats of synthetic enamel paint over a coat of red oxide primer complete to the satisfaction of Engineer-in-charge . | 220 | Each | 120 ₹26,400 Lowest | 306 ₹67,320 | 200 ₹44,000 | 300 ₹66,000 |
| 5.00 | (e) Removing the existing upper unserviceable MS tubes stiffener and Supply & fix 33 x 25mm MS tubes stiffener and proper welded including cuting & threading where required of sorts all as per drawing including painting the affected portion with two coats of synthetic enamel paint over a coat of red oxide primer complete to the satisfaction of Engineer-in-charge . | 350 | Each | 50 ₹17,500 Lowest | 126 ₹44,100 | 100 ₹35,000 | 300 ₹1,05,000 |
| 6.00 | (f) Removing the existing upper unserviceable MS tubes pipe leg rail and Supply & fix 32 x 32mm MS tubes pipe leg rail and proper welded including cuting & threading where required of sorts all as per drawing including painting the affected portion with two coats of synthetic enamel paint over a coat of red oxide primer complete to the satisfaction of Engineer-in-charge . | 220 | Each | 400 ₹88,000 | 297 ₹65,340 | 150 ₹33,000 Lowest | 300 ₹66,000 |
| 7.00 | (g) M&L preparation of existing steel surfaces by removing all dents filling with putty & spray painting the entire exposed steel surface by machine with two coats of synthetic enamel paint black to satisfaction of Engineer-in-charhe in MES BSO furniture yard or at Unit lines as directed by Engineer-in- charge . | 220 | Each | 150 ₹33,000 Lowest | 315 ₹69,300 | 300 ₹66,000 | 160 ₹35,200 |
| 8.00 | (h) Continuous welding MS frame to the top base frame joints, leg joints and stiffener joints of Charpoy where required of sorts all as per drawing & painting the affected portion with two coats of synthetic enamel paint over a coat of red oxide primer complete all as directed. | 170 | Each | 100 ₹17,000 | 63 ₹10,710 | 50 ₹8,500 Lowest | 150 ₹25,500 |
| 9.00 | (j) Removing the existing Metal Disc Footing alongwith hard rubber toe of legs and Supply & welding of 3mm Metal Disc Footing alongwith new Hard rubber toe for legs with ISI mark all as specified and shown on drawings and as directed by Engineer-in-Charge. | 900 | Each | 150 ₹1,35,000 | 45 ₹40,500 | 10 ₹9,000 Lowest | 80 ₹72,000 |
| 10.00 | CHARPOY WITH HARD TOP (FD/MAP-II/01)
(a) Removing the existing unserviceable any type & size of plywood &, supply and fix ew 12mm thick Plywood, 7 Ply, commercial type, BWR, exterior grade (water proof), ISI marked, of size 1980 mm x 900mm in single piece (make KitPly, CenturyPly, Greenply) as shown on drawings & as directed.. | 175 | Each | 1,300 ₹2,27,500 Lowest | 1,323 ₹2,31,525 | 1,400 ₹2,45,000 | 1,800 ₹3,15,000 |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
6 Jan 2026, 6:00 pmClosed
GE CENTRAL BANGALORE
ASC CENTRE AND COLLEGE AGRAM POST BANGALORE 560007
REPAIR PAINTING OF DOUBLE BUNK CHARPOY AND VARIOUS STEEL CHARPOYS UNDER GE CENTRAL BANGALORE
2025_MES_745039_1
8558E
Open Tender
Miscellaneous Works
Item Rate
270 days
GE CENTRAL BANGALORE
Please refer tender documents
6 documents required · 6 mandatory
₹500
GE CENTRAL BANGALORE
₹60,000
Yes
14 Feb 2026
18 Dec 2025
8 Jan 2026
18 Dec 2025
6 Jan 2026
31 Dec 2025
18 Dec 2025 - 30 Dec 2025
Amount
NOTE FOR ALL ITEMS : (i)Removal of following existing unserviceable components of various furniture items carefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components / discorded components as mentioned including tightening the joints, placing every part in-tact as applicable as per drgs. (ii Work will be executed where the furniture exist in different User Units of GE (Central)Bangalore including BSO's Furniture Yard as directed by Engineer-in-Charge. ADOUBLE BUNK CHARPOY WITH PLY TOP (a) Removing the existing upper unserviceable any type and size of plywood top and supply and fix new 12mm thick Plywood, 7 Ply, commercial type, BWR, exterior grade (water proof), ISI marked, of size 1980 mm x 900 mm in single piece (make KitPly, CenturyPly, Greenply) as shown on drawings & as directed.
(b) Removing the existing bottom unserviceable any type and size of plywood top and supply and fix ew 12mm thick Plywood, 7 Ply, commercial type, BWR, exterior grade (water proof), ISI marked, of size 1980 mm x 900 mm in single piece (make KitPly, CenturyPly, Greenply) as shown on drawings & as directed.
(c) Removing the existing rectangular MS tubes long rails and supply & fix 60 x 25mm rectangular MS tubes long rails proper welded including cuting & threading where required of sorts all as per drawing including painting the affected portion with two coats of synthetic enamel paint over a coat of red oxide primer complete to the satisfaction of Engineer-in-charge .
(d) Removing the existing upper unserviceable rectangular MS tubes short rails and Supply & fix 60 x 25mm rectangular MS tubes short rails and proper welded including cuting & threading where required of sorts all as per drawing including painting the affected portion with two coats of synthetic enamel paint over a coat of red oxide primer complete to the satisfaction of Engineer-in-charge .
(e) Removing the existing upper unserviceable MS tubes stiffener and Supply & fix 33 x 25mm MS tubes stiffener and proper welded including cuting & threading where required of sorts all as per drawing including painting the affected portion with two coats of synthetic enamel paint over a coat of red oxide primer complete to the satisfaction of Engineer-in-charge .
(f) Removing the existing upper unserviceable MS tubes pipe leg rail and Supply & fix 32 x 32mm MS tubes pipe leg rail and proper welded including cuting & threading where required of sorts all as per drawing including painting the affected portion with two coats of synthetic enamel paint over a coat of red oxide primer complete to the satisfaction of Engineer-in-charge .
(g) M&L preparation of existing steel surfaces by removing all dents filling with putty & spray painting the entire exposed steel surface by machine with two coats of synthetic enamel paint black to satisfaction of Engineer-in-charhe in MES BSO furniture yard or at Unit lines as directed by Engineer-in- charge .
(h) Continuous welding MS frame to the top base frame joints, leg joints and stiffener joints of Charpoy where required of sorts all as per drawing & painting the affected portion with two coats of synthetic enamel paint over a coat of red oxide primer complete all as directed.
(j) Removing the existing Metal Disc Footing alongwith hard rubber toe of legs and Supply & welding of 3mm Metal Disc Footing alongwith new Hard rubber toe for legs with ISI mark all as specified and shown on drawings and as directed by Engineer-in-Charge.
CHARPOY WITH HARD TOP (FD/MAP-II/01) (a) Removing the existing unserviceable any type & size of plywood &, supply and fix ew 12mm thick Plywood, 7 Ply, commercial type, BWR, exterior grade (water proof), ISI marked, of size 1980 mm x 900mm in single piece (make KitPly, CenturyPly, Greenply) as shown on drawings & as directed..
(b) Removing the existing unserviceable Gauge rectangular MS tubes long rail and Supply & fix 25x65mm x 16 Gauge rectangular MS tubes long rail and proper welded where required of sorts all as per drawing including painting the affected portion with two coats of synthetic enamel paint over a coat of red oxide primer complete all as directed.
(c) Removing the existing unserviceable Gauge rectangular MS tubes short rail and Supply & fix 25x65mm x 16 Gauge rectangular MS tubes short rail including cuting & threading and fixing to Charpoy Hard Top with proper welded where required of sorts all as per drawing including painting the affected portion with two coats of synthetic enamel paint over a coat of red oxide primer complete all as directed.
(d) Removing the existing unserviceable Gauge MS tubes stiffener and Supply & fix 25 x 25mm x 16 Gauge MS tubes stiffener including cuting & threading and proper welded where required of sorts all as per drawing including painting the affected portion with two coats of synthetic enamel paint over a coat of red oxide primer complete all as directed.
(e) Removing the existing unserviceable Gauge pipe leg rail and Supply & fix 32 x 32mm MS tubes x 16 Gauge pipe leg rail including cuting & threading and proper welded where required of sorts all as per drawing including painting the affected portion with two coats of synthetic enamel paint over a coat of red oxide primer complete all as directed.
(f) M&L preparation of existing steel surfaces by removing all dents filling with putty & spray painting with machine two coats of synthetic enamel paint black in BSO Furniture Yard or in Unit lines as directed by Engineer-in- charge .
(g) Continuous welding MS frame to the top base frame joints, leg joints and stiffener joints of Charpoy where required of sorts all as per drawing including painting the affected portion with two coats of synthetic enamel paint over a coat of red oxide primer complete all as directed.
(h) Removing the existing unserviceable MS cleat with frame and Supply & welding MS cleat with frame to support ply with ISI mark all as specified and shown on drawings and as directed by Engineer-in-Charge.
CHARPOY FOR JCO's/ PLYWOOD TOP (CWE/FD/01) (a) Removing the existing unserviceable any type and size of plywood top and supply and fixew 12mm thick Plywood, 7 Ply, commercial type, BWR, exterior grade (water proof), ISI marked, of size 1980 mm x 900mm in single piece (make KitPly, CenturyPly, Greenply) as shown on drawings & as directed.
(b) Removing the existing unserviceable Gauge rectangular MS tubes long rail and Supply & fix 25x60mm x 16 Gauge rectangular MS tubes long rail and proper welded including cuting & threading where required of sorts all as per drawing including painting the affected portion with two coats of synthetic enamel paint over a coat of red oxide primer complete to the satisfaction of Engineer-in-charge .
(c) Removing the existing unserviceable Gauge rectangular MS tubes short rail and Supply & fix 25x60mm x 16 Gauge rectangular MS tubes short rail and proper welded including cuting & threading where required of sorts all as per drawing including painting the affected portion with two coats of synthetic enamel paint over a coat of red oxide primer complete to the satisfaction of Engineer-in-charge .
(d) Removing the existing unserviceable Gauge MS tubes stiffener and Supply & fix 25 x 25mm x 16 Gauge MS tubes stiffener and proper welded including cuting & threadingwhere required of sorts all as per drawing including painting the affected portion with two coats of synthetic enamel paint over a coat of red oxide primer complete to the satisfaction of Engineer-in-charge .
(e) Removing the existing unserviceable MS tubes pipe leg rail and Supply & fix 32 x 32mm MS tubes pipe leg rail and proper welded where required of sorts all as per drawing including painting the affected portion with two coats of synthetic enamel paint over a coat of red oxide primer complete to the satisfaction of Engineer-in-charge .
(f) M&L preparation of existing steel surfaces by removing all dents filling with putty & spray painting with machine Two coats of synthetic enamel paint black as indicated in drgs in BSO Furniture Yard & Unit lines as directed by Engineer-in- charge .
(g) Continuous welding MS frame to the top base frame joints, leg joints and stiffener joints of Charpoy where required of sorts all as per drawing including painting the affected portion with two coats of synthetic enamel paint over a coat of red oxide primer complete all as directed.
(h) Removing the existing unserviceable MS cleat and Supply & welding MS cleat with frame to support ply with ISI mark all as specified and shown on drawings and as directed by Engineer-in-Charge.
Global Furnisherts (BID ID -3515896)
Vivek Engineers (BID ID -3516412)
Annu Enterprises (BID ID -3517189)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.41 MB
BOQ_834232.xls
BOQ • 0.62 MB
Tender8558E.pdf
Tender Documents • 0.77 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .