CIVIL WORK

Amount

R&R work of Toilets situated in Admin block building at SLDC Complex, BBMB, Chandigarh

Dismantling of floor tiles at any floor of the building, laid in cement mortar including dismantling of cement concrete base and disposal of malba at a suitable place with in a distance of 100 Mtrs of the complex complete in all respect. Pb-CSR-Ref.-30.95-L/R.

Dismantling of wall tiles at any floor of the building, laid in cement mortar including scraping of cement plaster and disposal of malba at a suitable place within a distance of 100 Mtrs of the complex complete in all respect. Pb-CSR-Ref.-30.94- L/R.

Dismantling Sanitary fixtures such as Eurpoean/Indian/Orissa W.C., PVC / China ware cistern, Wash Hand Basin, Urinal Pot, Sinks and CP Fittings and disposal of dismantled material within a distance of 100 Mtr. complete in all respect as required by EIC. (a) Eurpoean/Indian/Orissa W.C. Pb-CSR-Ref.-30.88(a)- L/R.

(b) PVC / China Ware Cistern. Pb-CSR-Ref.-30.88(b)- L/R.

(c) Wash Hand Basin / Urinal Pot. Pb-CSR-Ref.-30.88(c)- L/R.

(e) CP Bib Cock/Angle Cock/Stop Cock/Shower/Bottle Trap.CSR-Ref.-30.88(e)- L/R.

(g) Bathroom Assessories such as Soap Dish, Towel Rail,Towel Ring,Towel Bracket, Mirror, Toilet Paper Holder, Seat Cover, Jet Pressure and all other accessories. Pb-CSR-Ref.-30.88(g)- L/R.

Providing and fixing H.C.I. Floor traps conforming to I.S.I. Specification of reputed firm of the self cleaning design with S.S. grating with frame with or without vent arm and including cement concrete 1:2:4 under and around the floor trap where required upto floor level complete in all respects including cutting and making good the walls and floors,etc. (a) With 100mm x 75mm i/d Floor Trap (weighing 4.0 Kg). Pb-CSR-Ref.-30.79(a)- T/R.

Dismantling, disjointing, removal of G.I. pipe lines, specials, valves and fittings complete in all respects.(a)15mm internal diametre pipe line.CSR-Ref.-28.63(a)-L/R.

Providing ,laying, jointing, fixing and testing ISI Marked G.I. Pipe (as per IS 1239) BClass including cost of specials (such as tees, bends, sockets, elbows etc.) ,painting with anti corrosive bitumastic paint, testing,cutting,threading Inside building complete. (a) 15mm i/d. Pb-CSR-Ref.-28.35(a)- T/R.

First class burnt brick laid in cement sand mortar 1:6 in foundation and plinth. Pb-CSR-Ref.-11.3(i)- T/R.

Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc. CSR-Ref.-9.8- T/R.

Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete. Pb-CSR-Ref.-18.18-T/R.

Providing and fixing in position C.P. brass bottle trap 32mm dia with 40 mm seal of approved make (to the approval of EIC) complete in all respect. CSR-Ref.-30.44-T/R.

Providing & fixing 15 mm C.P brass laboratory cock swan neck of approved make (to the approval of EIC) complete in all respect. (b) Laboratory cock swan neck Two Way. Pb-CSR-Ref.-30.68(b)-T/R.

Providing and fixing in position towel rails /ring of approved make (to the approval of EIC ) fixed in with rawl plugs embedded in walls with brass screws complete in all respect. (a) C.P. brass towel Rails size 15mm dia 610mm long.CSR-Ref.-30.58(a)T/R.

Providing and fixing in position SS Grating with frame of approved make (to the approval of EIC) complete in all respects. Pb-CSR-Ref.-30.80-T/R.

Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of EIC )complete in all respect. (ii) C.P. brass Bib cock foam flow without flange. Pb-CSR-Ref.-30.65A(ii)-T/R.

Cement concrete 1:2:4- (a) With stone ballast or shingle. (i) mixing by manual means. Pb-CSR-Ref.-10.13(a)(i)-T/R.

Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes line and making good the same to its original condition. (a) Size 75mm x 75mm. Pb-CSR-Ref.-30.85(a)-L/R.

Coloured Granite stone tiles 15mm to 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps. Pb-CSR-Ref.-14.88-T/R.

Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., completewhite cement slurry in joints including corners angles and beading. Pb-CSR-Ref.-14.72-T/R.

Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/ Highly Gloss finish/Highlighter/emboss conforming to IS: 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 600 x600 mm as approved by EIC in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. Pb-CSR-Ref.-14.129-T/R.

Providing and laying vitrified floor tiles in different sizes in light colour shades made using Soluble Salt Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Soluble salt Print Penetration should be up to 1 to 2 mm after the tiles are fired & polished ).(a) Size 600x600 mm. Pb-CSR-Ref.-14.112(a)-T/R.

Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the EIC) consisting of 10 ltr. PVC flushing cistern ISI marked, PVC short bend 32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of EIC. Pb-CSR-Ref.-30.4-T/R.

Providing and fixing in position Chinaware Indian Orisa water closet size 580x440 mm of approved make (to the approval of the EIC) consisting of 10 ltr. PVC flushing cistern ISI makred including cost of PVC long bend 32 mm dia complete in all respect and to the entire satisfaction of Engineer-in-charge. Pb-CSR-Ref.-30.2-T/R.

Providing and fixing in position vitreous Chinaware white channel of approved make (to the approval of EIC) of size 600mmx100mm including laying and fixing in cement concrete 1:2:4 complete in all respect. Pb-CSR-Ref.-30.100-T/R.

Providing and fixing jet spray with 2'-6" long PVC pipe. (a) With C.P. Brass nut. Pb-CSR-Ref.-30.8(a)-T/R.

Providing and fixing in position C.P. brass soap dish of approved make (to the approval of EIC) fixed into wall with rawl plugs and C.P brass screws complete in all respect. Pb-CSR-Ref.-30.60-T/R.

Providing & Fixing in postion liquid soap container of approved make (to the approval of EIC ) complete in all respect. (b)Acrylic liquid soap container. Pb-CSR-Ref.-30.67(b)-T/R.

Providing and fixing in position Sensor Battery Operated for urinal of approved make (to the approval of EIC) complete in all respect. Pb-CSR-Ref.-30.18(B)-T/R.

Providing and fixing Stainless steel health faucet complete in all respect. Pb-CSR-Ref.-30.24-T/R.

Providing and fixing in position vitreous chinaware white lavatory suites ofapproved make (to the approval of EIC) including Rack Bolt Screw Pair 115mm long without CP fittings complete in all respect. (ix) Size 560mm x 450mm (Under counter oval). Pb-CSR-Ref.-30.31(ix)-T/R.

Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (ofapproved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the EIC). (c ) Size 1500mmx600mm or any other size. Pb-CSR-Ref.-30.61(c)-T/R.

Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of EIC) complete in all respect. (c) C.P.brass 15mm Angle valve without flange. Pb-CSR-Ref.-30.66(c)-T/R.

Providing & Fixing in position C.P. Brass flange Dome of approved make (to the approval of EIC) under various fixtures complete in all respect.CSR-Ref.-30.64-A-T/R.

Providing & fixing in position PVC flexible tube connection of approved make (to the approval of EIC) complete in all respect. (b) PVC tube connection of size 15mm x 450 mm with C.P. Brass nut. Pb-CSR-Ref.-30.72(b)-T/R.

Renewing glass panes with putty and nails wherever necessary. (c) Frosted glass panes weighing 8.44 Kg/sqm. Pb-CSR-Ref.-31.5(c)-T/R.

Painting two or more coats with synthetic enamel paints in all shades on old wood work or metallic or plastered or concrete surface to give an even shade including rubbing down old paint. Pb-CSR-Ref.-16.18-T/R.

REPLACEMENT OF WIRES, SHEETS, SWITCHES AND OTHER ACCESSORIES IN THE EXISTING RECESSED CONDUIT PIPE WIRING SYSTEM (WITH FLUSH PIANO TYPE ACCESSORIES) Derived From CSR 34.03: Replacement of PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in existing heavy gauge welded conduit pipe 20 mm/25 mm dia (1.6mm thick) ISI Marked, recessed in wall etc., complete with (Flush/Piano type accessories) Step type electronic fan regulators 100watts (socket size), bell push, 5Pin 6Amp., 16Amp. universal sockets, 6/16/20Amp. Switches etc. and covered with brown bakelite white glazed translucent backside painted sheet 3mm thick etc., PVC connector (For Fan Box and Call Bell), PVC Bush, Brass Screws, bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc. including the cost of above material and repair of chases (with finsihing the surface):- (Derived From CSR 34.03). (ii) Wiring light point. Pb-CSR-Ref.-34.08A(ii)-T/R.

(iv) Wiring 6Amp. wall socket point. Pb-CSR-Ref.-34.08A(iv)-T/R.

(vi) Wiring 16/20Amp. power plug control point. Pb-CSR-Ref.-34.08A(vi)-T/R.

R&R work of battery charging room & RCC situated in computer block building at SLDC Complex, BBMB, Chandigarh

Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres. Pb-CSR-Ref. No- 6.6-L/R

Cement concrete 1:6:12. (b) With stone aggregate 40mm gauge. (i) mixing by manual means. Pb-CSR-Ref. No- 10.8(b)(i)-T/R

Cement concrete 1:2:4. (a) With stone ballast or shingle. (i) mixing by manual means. Pb-CSR-Ref. No- 10.13(a)(i)-T/R

First class burnt brick laid in cement sand mortar 1:6 in foundation and plinth. Pb-CSR-Ref. No- 11.3(i)-T/R

First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level. Pb-CSR-Ref. No- 11.4(i)-T/R

Damp proof course 2.5cm thick of cement concrete 1:2:4 with 2 coats of bitumen 20/30 penetration at 1.65 Kg per sqm laid hot and sanded. Pb-CSR-Ref. No- 10.28-T/R

12.5 mm thick cement plaster 1:5. Pb-CSR-Ref. No- 15.10-T/R

20mm thick cement plaster 1:4 in two coat work. Pb-CSR-Ref. No- 15.20-T/R

Finishing walls with cement based water soluble exterior paint such as snowcem, robbiacem etc. two or more coats to give an even shade. Pb-CSR-Ref. No- 16.13-T/R

Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing in position. Pb-CSR-Ref. No- 18.4-T/R

Steel work fixed independently without connecting plates including cutting hoisting and fixing in position. (c)Tees angles & channels Pb-CSR-Ref. No- 18.1(c)-T/R

Providing and laying vitrified floor tiles of different sizes in light colour shades made using Double Charge technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. (a) Size 600x600 mm. Pb-CSR-Ref. No- 14.113(a)-T/R

Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/ Highlighter/ emboss conforming to IS: 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 600 x 300 mm as approved by Engineer-in- Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. Pb-CSR-Ref. No- 14.128-T/R

Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish. Pb-CSR-Ref. No- 16.65-T/R

Painting with acid proof paint of approved brand and manufacture to give an even shade two or more coats. Pb-CSR-Ref. No- 16.64-T/R

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 micronsminimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (a) 0.50 mm (+ 0.05 %) thick. Pb-CSR-Ref. No- 13.27(ii)(a)-T/R

Providing and fixing tiled false ceiling at height upto 4.00 mtr of specified materials of size 595x595 mm ( GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece..) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all Tsections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. Pb-CSR-Ref. No- 13.81-T/R

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/neoprene felt etc. aluminum sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, aluminum snap beading forglazing/paneling, C.P.brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-In- Charge. (Glazing and paneling to be paid for separately) : (a) For fixed portion and chawkhats. Pb-CSR-Ref. No- 17.45(a)-T/R

(b) For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and labour for fixing of fittings wherever required including the cost of PVC Plug / neoprene gasket required. Pb-CSR-Ref. No- 17.45(b)-T/R

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in paneling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-In-Charge. Prelaminated particle board with decorative lamination on Both side. Pb-CSR-Ref. No- 17.46(ii)-T/R

Cost of aluminum fittings complete for doors, windows such as tower bolts, handles,Stoppers and screw etc. for these fittings (Excluding sliding bolt). (ii) For shutter area above 0.50 sqm. Pb-CSR-Ref. No- 17.23(ii)-T/R

Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : (B) 250mm x 16mm. Pb-CSR-Ref. No- 17.49(B)-T/R

Providing Polyester Powder coating 50 micron any coloured specified to alumnum section of various sizes including carriage of material from market to workshop & workshop to site of work. Pb-CSR-Ref. No- 18.48-T/R

RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES: Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½" deep for walls and CI 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):- (ii) Wiring light point. Pb-CSR-Ref. No- 34.02(ii)-T/R

(iv) Wiring 6Amp. wall socket point. Pb-CSR-Ref. No- 34.02(iv)-T/R

(vi) Wiring 16/20Amp. power plug control point. Pb-CSR-Ref. No- 34.02(vi)-T/R

Shifting of 6.00 mtr portion of fire fighting water hydrant, MS 150 mm dia pipe line by lowering the exixting pipe line into the ground and testing, behind the computer block building at SLDC Complex, Chandigarh, complete in all respects to the entire satisfaction of E-I-C. (NS Item)

Removing old paint with caustic soda solution and preparing surface. Pb-CSR-Ref. No- 16.35-T/R

Preparation of plastered or concrete surface for painting (including sand papering the surface) using Acryllic Wall Putty by applying two or more coats to get required finish including priming coat to make an even surface before applying Acrylic wall putty on new plastered surface.Complete as per specifications. Pb-CSR-Ref. No- 16.73-T/R

Finishing walls with interior texured paints of required shade and patterns/Design two coats more top coats applied @ 3.28 lt/ 10 sqmt and base coat @ 2.20 lts/10 sqmt complete in all respects to the entire satisfaction of E-I-C. (NS Item)

Providing and laying resilient vinyl sheet floor covering 2 mm thick, having a vinyl plastic wear layer with backing intended for use in light commercial and residential buildings, duly fixed to the base floor using adhesive as approved by the manufacturer. Pb-CSR-Ref. No- 14.99-T/R

Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes line and making good the same to its original condition. (a) Size 75 mm x 75 mm. Pb-CSR-Ref. No- 30.85(a)-L/R

PVC, HDPE PIPES & PVC FLEXIBLE PIPES: Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:- (x) Heavy Gauge PVC Conduit Pipe 25mm dia. (Flushed) Pb-CSR-Ref. No- 34.12(x)-T/R

R&R work of 02 no. bathroom and path in non-residential buildings at 66KV,S/S, BBMB, Chandigarh.

Dismantling of floor tiles at any floor of the building, laid in cement mortar including dismantling of cement concrete base and disposal of malba at a suitable place within a distance of 100 Mtrs of the complex complete in all respect. Pb-CSR-Ref. No- 30.95 L/R

Dismantling of wall tiles at any floor of the building, laid in cement mortar including scraping of cement plaster and disposal of malba at a suitable place within a distance of 100 Mtrs of the complex complete in all respect. Pb-CSR-Ref. No- 30.94 L/R

Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. (a) Doors of area 3 sqm and below. Pb-CSR-Ref. No- 8.26(a) L/R

Dismantling Sanitary fixtures such as Eurpoean/Indian/Orissa W.C., PVC / China ware cistern, Wash Hand Basin, Urinal Pot, Sinks and CP Fittings and disposal of dismantled material within a distance of 100 Mtr. complete in all respect as required by Engineer-in-Charge. (a) Eurpoean/Indian/Orissa W.C.Pb-CSR-Ref. No- 30.88(a) L/R

(b) PVC / China Ware Cistern. Pb-CSR-Ref. No- 30.88(b) L/R

(c ) Wash Hand Basin / Urinal Pot. Pb-CSR-Ref. No- 30.88(c) L/R

(e) CP Bib Cock/Angle Cock/Stop Cock/Shower/Bottle Trap. Pb-CSR-Ref. No- 30.88(e) L/R

Providing ,laying, jointing, fixing and testing ISI Marked G.I. Pipe (as per IS 1239) BClass including cost of specials (such as tees,bends, sockets, elbows etc.) ,painting with anti corrosive bitumastic paint, testing, cutting, threading Inside building complete. (a) 15mm i/d. Pb-CSR-Ref. No- 28.35(a) T/R

Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., completewhite cement slurry in joints including corners angles and beading. Pb-CSR-Ref. No- 14.72 T/R

Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/ emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 600 x600 mm as approved by Engineer-in- Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. Pb-CSR-Ref. No- 14.129 T/R

Scraping: (a)White wash and colour wash. Pb-CSR-Ref. No- 8.31(a) L/R

Preparation of plastered surfaces for distempering including surface, applying filling with approved quality filler consisting of plaster of paris and chalk mitti including finishing the surface to the required finish complete. Pb-CSR-Ref. No- 16.6 T/R

Distempering with dry distemper of approved manufacture two or more coats on old distempetered surface when shade is changed. Pb-CSR-Ref. No- 16.9 T/R

Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI marked, PVC short bend 32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge. Pb-CSR-Ref. No- 30.4 T/R

Providing and fixing in position Chinaware Indian Orisa water closet size 580x440 mm of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI makred including cost of PVC long bend 32 mm dia complete in all respect and to the entire satisfaction of Engineer-in-charge. Pb-CSR-Ref. No- 30.2 T/R

Providing and fixing jet spray with 2'-6" long PVC pipe. (a)With C.P. Brass nut. Pb-CSR-Ref. No- 30.8(a) T/R

Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) including Rack Bolt Screw Pair 115mm long without CP fittings complete in all respect. (ii)Size 550 mm x 400 mm x 815 mm. Pb-CSR-Ref. No- 30.31(ii) T/R

Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the E-I-C). (a) Size 600mmx450mm. Pb-CSR-Ref. No- 30.61(a) T/R

Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge )complete in all respect. (i) C.P. brass Bib cock long nose/long body foam flow without flange. Pb-CSR-Ref. No- 30.65(A)(i) T/R

Providing & Fixing in postion stop cock/Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect. (c) C.P.brass 15mm Angle valve without flange. Pb-CSR-Ref. No- 30.66(c) T/R

Providing and fixing in position SS Grating with frame of approved make (to the approval of engineer in charge) complete in all respects. Pb-CSR-Ref. No- 30.80 T/R

Providing & Fixing in position C.P. Brass flange Dome of approved make (to the approval of Engineer-in-charge ) under various fixtures complete in all respect. Pb-CSR-Ref. No- 30.64-A T/R

Providing & fixing in position vitreous Chinware white Indian make flat back or angular lipped front small urinals size 265x315x440mm approved make (to the approval of the Engineer-in-charge) with C.P. brass tube connection 300 mm long complete in all respect. Pb-CSR-Ref. No- 30.15 T/R

Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect. Pb-CSR-Ref. No- 30.20 T/R

Providing and fixing in position 15mm C.P. Pillar cock foam flow of approved make (to the approval of Engineer-in-charge). Pb-CSR-Ref. No- 30.33 T/R

Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge ) complete in all respect. (b) PVC tube connection of size 15 mm x 450 mm with C.P. Brass nut. Pb-CSR-Ref. No- 30.72(b) T/R

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections conforming to Is: 733 and IS: 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/neoprene felt etc. aluminum sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, aluminum snap beading for glazing/paneling, C.P.brass/stainless steel screws, all complete as per architectural drawings and the directions of EIC.(Glazing and paneling to be paid for separately):(a)For fixed portion and chawkhats. Pb-CSR-Ref. No-17.45(a)T/R

(b) For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and labour for fixing of fittings wherever required including the cost of PVC Plug /neoprene gasket required. Pb-CSR-Ref. No- 17.45(b) T/R

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in paneling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-In-Charge. Prelaminated particle board with decorative lamination on Both side. Pb-CSR-Ref. No- 17.46(ii) T/R

Cost of aluminum fittings complete for doors, windows such as tower bolts, handles,Stoppers and screw etc. for these fittings (Excluding sliding bolt). (ii) For shutter area above 0.50 sqm. Pb-CSR-Ref. No- 17.23(ii) T/R

Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete: (B) 250mm x 16mm. Pb-CSR-Ref. No- 17.49(B) T/R.

RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES: Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½" deep for walls and CI 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):- (ii) Wiring light point. Pb-CSR-Ref. No- 34.02(ii) T/R

Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres. Pb-CSR-Ref. No-6.6 L/R

Cement concrete 1:6:12. (b) With stone aggregate 40mm gauge. (i) mixing by manual means. Pb-CSR-Ref. No- 10.8(b)(i) T/R.

Dismantling brick work tile, masonry or tile lining. (b) In cement. Pb-CSR-Ref. No-8.5(b) L/R.

Scraping. (e) Bricks dismantled from brick work in lime or cement. Pb-CSR-Ref. No-8.31(e) L/R.

First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level. Pb-CSR-Ref. No-11.4(i) T/R.

Cement concrete 1:2:4. (a) With stone ballast or shingle. (i) mixing by manual means. Pb-CSR-Ref. No-10.13(a)(i) T/R.

12.5 mm thick cement plaster 1:5. Pb-CSR-Ref. No-15.10 T/R.

Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M-35 grade machine made rubber moulded smooth finish with strong vibratory process or with vibrohydraulic compaction machine and of approved size and design / shape laid in Ordinary Grey and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in-Charge. IS Code: 15658(2006). Pb-CSR-Ref. No-14.137 T/R.

LOADING AND UNLOADING: By Manual Means: (A)Stone (building or pitching) Sand, Earth, Fly Ash, Bajri, Shingle, Spalls, Brick bats, Brick ballast and Stone metal. Pb-CSR-Ref. No-4.2(A) L/R.

CARRIAGE: Earth,Surkhi, Sand, Earth, Fly Ash, Bajri, Ballast, Stone boulders, Kankar and building rubbish, Earth. Upto 2.0 km. Pb-CSR-Ref. No-5.2(i) T/R.

ELEGANT SALES AND SERVICES

Mohit Sahni