Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.1 LAccepted-AOC | L1 | Accepted-AOC ok | |
| 2 | L2₹1.2 L+₹3,817.34 (3.38%)Rejected-Finance | L2 | Rejected-Finance reject |
Tender Value
₹1.3 L
EMD Value
₹2,540
Closing Date
13 Feb 2026, 9:30 amClosed
Executive Engineer HPPWD Shimla Division No. III
..E. E. Shimla DIVISION NO. III, HPPWD, Shimla-3
Repair renovation to various residential buildings under division No.III Shimla. SH Repair of Master bedroom toilet in set No. 109 block E in New MLA Hostel at Vidhan Sabha
2026_PWD_127691_6
SD-III-20114-130dt.31-01-2026
Open Tender
Civil Works - Buildings
Percentage
30 days
Vidhan Sabha
As per DBD
10 documents required · 10 mandatory
₹350
₹2,540
29 Mar 2026
6 Feb 2026
13 Feb 2026
6 Feb 2026
13 Feb 2026
6 Feb 2026
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm
Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size)
15 mm cement plaster 1:6(1 cement: 6coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall.
Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of Tile 300x300 mm
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the Manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 300x300 mm
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. 15 mm dia nominal bore (INTERNAL)
Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc.complete including carriage of materials within all leads and lifts 110 X90mm
Providing and fixing high pressure Type B PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc.Type B in all leads and lifts as desired by Engineer in Charge. Complete.75 mm dia
Providing and fixing high pressure Type B PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc.Type B in all leads and lifts as desired by Engineer in Charge. Complete.110 mm dia
Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc complete in all leads and lifts as desired by Engineer in Charge. complete. 75 mm dia
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete Flexible pipe 32 mm dia
Providing and fixing C.P waste viking make for wash basin or sink including carriage of materials within all leads and lifts.
Providing and fixing water closet squatting pan (Indian suitable for use as squatting pan or European type water closet ( hindware made cat No OPC ELBA Rimless P S/W 92037
Providing and fixing wash basin with C.I. brackets, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps Cat No. WB Neo Largo S/W HINDWARE 10103
Providing and fixing vitreous China pedestal for wash basin complete recessed at the back for the reception of pipes and fittings. Pedestal Opal/Neo S white Hindware cat no. 11032
Providing and fixing ESS ESS soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. ESS ESS AC 303
P/F ESS ESS Angle cock cat no. PT04A ESS ESS including carriage of materials within all leads and lifts.
Providing and fixing Steel wired connection pipe: 60 cm length 15 mm nominal bore viking made
P/F ESS ESS WALL MIXTURE CAT PT08N including carriage of materials within all leads and lifts.
P/F ESS ESS Center hole basin mixture PT21-SLBM W/O PWS ESS ESS including carriage of materials within all leads and lifts.
Providing and fixing towel road complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. ESS ESS made AC-301
Providing and fixing towel ring complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. ESS ESS made AC-302
Providing and fixing 460x130x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. AC-307
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing rectangular in shape 60cm x 45cm 052 EXOTICA
Providing and fixing 8 mm dia health faucet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. CAT NO. C232N ESS ESS
Providing and fixing grating of approved quality and colour.Circular type Viking made. including carriage of materials within all leads and lifts.
Providing and fixing gun metal gate valve with PVC coated lever of approved quality (screwed end) 15 mm nominal bore. including carriage of materials within all leads and lifts.
Providing and fixing Tumbler holder with acrylic tumbler including fixing etc. complete including carriage of materials within all leads and lifts:- Cat No. AC-304.
Providing & fixing ESS ESS TOILET PAPER HOLDER 15 mm dia complete including carriage of materials within all leads and lifts CAT AC 306
Providing and Fixing PVC corner shelves single piece of make sleek Essence HSIL complete including carriage of materials within all leads and lifts.Cat no. S2CS101
Providing and fixing 15mm dia CP Bib Cock with wall flange of approved quality and make (Cat no.PT02) complete including carriage of materials within all leads and lifts.
Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One or more coats on old work
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge
Dubbing out an old irregular walls average 10mm thick with cement mortar 1:6 (1 cement : 6 sand) including carriage of materials within all leads and lifts.
Providing and fixing wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85 G. with wire of dia 0.56 mm for doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws. 40mm thick 2nd class deodar wood.
Providing and fixing panelled glazed or panelled and glazed shutters for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws.35mm thick. 2nd class deodar wood.
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.78 MB
BOQ_188649.xls
BOQ • 0.35 MB
SBD126822.pdf
Tender Documents • 2.36 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .