SPECIAL REPAIRS TO PAVER BLOCK PATH AT COBRA GROUND 2TTR AND CERTAIN MINOR WORKS IN THE AREA OF AGE B/R-I UNDER GE (WEST) JABALPUR

Amount

Demolition of Brick / Stone Masonry built in Cement Mortar including all quoins arches pillars etc and removing rubbish to a distance not exceeding 50 M complete all as specified and as directed.

Demolition of Unreinforced Cement Concrete in ground floors and Pavings not exceeding 15cm thick [below or above ground level] complete all as specified and as directed.

Taking down Cement Plaster any description on brick or stone walls or concrete surfaces including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

Taking down existing interlocking paver block making good disturbed portion and refixing the existing interlocking paver block complete all as specified

Dismantling Floor, Hearth or Wall Tiling including cement mortar bedding [but not backing] and removing serviceable tiles to the stores and removing rubbish / debris of the premises complete all as specified and as directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets including E- Grid frame work complete all as specified and directed.

Dismantling water storage tanks exc 250 and n exc 500 ltr capacity complete all as specified and directed.

Dismantling of Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings etc all complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, etc., completed all as specified and as directed.

Taking down chowket or frame with shutter (without taking off shutters from the frame) area not exceeding 1.5 Sqm each complete all as specified & directed.

Taking down chowkhat or frame with shutter (without taking off shutters from the frame) area exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified & directed.

Taking down or up steel tubing and connections for 15 mm bore of pipe complete all as specified and as directed.

Taking down or up steel tubing and connections for 20 mm bore of pipe complete all as specified and as directed.

Taking down or up steel tubing and connections for 25 mm or 32mmbore of pipe complete all as specified and as directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes,bends, swan necks etc. complete all as specified and as directed. Note : Measurement shall be of overall as fixed along the centre line over fittings and accessories.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in Soft / Loose soil, complete all as specified and as directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 10 Sq.m on plan area and depth exc 1.50m but not exceeding 3m deep in soft/loose soil for shafts, wells, cesspits, manholes, pier holes, as in foundation etc. complete all as specified and as directed.

Excavation over areas not exceeding 1.5m deep in Soft / Loose soil, for foundations, etc. complete all as specified and as directed.

Excavation over areas exceeding 1.50 m and not exceeding 3.0m in depth and getting out in Soft / Loose soil complete all as specified and as directed.

Removing excavated soils n.exc. 50m and depositing where directed at a level n.exc. 1.5m above the starting point complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick of excavated soil complete all as specified and as directed. Note: A deduction of 10% shall be made from total computed volume of filling to cater in bulk irrespective of machinery used for ramming.

M&L for loose filling with (broken bricks) aggregate of gauge 50 mm in soakage pits, sokage wells, complete all as specified and as directed.

M & L 50 mm thick sand filling under floors or in foundations including ramming, watering and consolidation complete all as specified and as directed.

M & L for moorum/ red bajri filling under floors laid in layers not exceeding 15 cm thick, spread levelled and rammed / rolled including watering to required level and gradient complete all as specified and as directed.

M & L for hardcore of gauge not exceeding 63 mm of broken stones or boulders, deposited, spread and levelled in layers not exceeding 15 cm thick watered and rammed to a true surface in broken boulder complete all as specified and as directed.

M & L for hardcore of gauge exceeding 63 mm and not exceeding 100mm of broken stones or boulders, deposited, spread and levelled in layers not exceeding 15 cm thick watered and rammed to a true surface complete all as specified and as directed.

M&L for RCC 1:2:4 (Nominal mix) type B-1 (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs , landings, balconies, canopies, deck slab and in shelves and the like complete all as specified and directed.

Supply only liquid integral water proofing compound complete all as specified and as directed.

M & L for PCC 1:4:8, Type D-2, using 40mm graded stone aggregate as in Foundation, Fillings, Mass concrete, Footings etc complete all as specified and as directed.

M & L for Factory made precast cement concrete blocks made of 1:2:4 type B-1, using 20mm graded stone agg as in kerb stone chamfered fixed in CM 1:6 complete all as specified

M & L for PCC 1:3:6 Type C-1 [using 20 mm graded stone aggregate] in surface channels and drains including forming fair finished drain or channel of 300 mm inner girth using extra cement including forms, moulds, mitred / stooped ends complete all as specified and as directed.

M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) in lintels upto 1.5 clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers ,apex stones, bed plates, water troughs and the like including use of formwork (straight or curved) ,including weathering, slightly rounded or chamfered angles and throating, all as specified and as directed.

M&L for PCC (1:2:4) type B-1 using 20 mm graded stone aggregate in surface channels of drains and benching including finishing the top of benching even and smooth using extra cement. (Note:- Forming fair finished channel shall be measured and paid for separately).

M&L Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc complete all as specified and as directed.

M&L for providing precast Reinforced cement concrete 1:2:4 type B-1 (using 20mm graded stone agg) for landings, chajjas, cover slabs (manholes) and similar articles with plain faces etc. with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar complete with joints to match the shade set in CM 1:4 including necessary form work complete.

M & L for brick work with sub class "B" bricks, old size, straight or curved on plan exceeding 6 m mean radius built in Cement Mortar 1:6 complete all as specified and as directed.

M & L for brick work with fly ash modular bricks, straight or curved on plan exceeding 6 m mean radius built in Cement Mortar 1:6 complete all as specified and as directed.

M&L for Brick work with sub class ‘B’ brick, old size, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and as directed. .

Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed.

Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick [horizontal or sloping] including fair finished surfaces complete all as specified and directed.

Use & waste for form work to edges of concrete flat, treads breaks in floor, window cills, concrete railings, openings in concrete walls, floor and roof and similar work exc 05 cm but not exc 10 cm wide complete all as specified and directed.

S&F PVC moulded door frame of size 50mm x 95mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube supplying & fixing in opening but single pre laminated PVC sheet used instead of plain colour PVC sheet as per specifications complete all as specified and as directed.

S&F PVC door frame size 50mm x 47mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube supplying & fixing in opening as per specifications complete all as specified and as directed.

S&F Factory Made Solid PVC Moulded Door Shutters with particle board core 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plan colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed.

S&F in repair 18 mm thick PVC sheet one side prelaminated of approved texture ("celuca ply of Rajshree make or equivalent in "Sintex" as approved by GE) as in Kitchen cabinet. (with shelves and partitions) including necessary fitting & fixture as per manucture's instructions complete all as specified and as directed.

S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed.

S & F Aluminium alloy, anodised, Sliding Door Bolt with hasp and staple [Bolt Type] of size 300 mm and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

S&F in repair aluminium alloy anodized sliding door bolt with hasp, staples (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts or extruded sections or cast aluminium alloy length of bolt 250mm complete all as specified and directed by Engr-in-charge.

S&F aluminium anodised, barrel tower bolts of extruded section with length of bolt 150 mm complete all as specified and as directed

S&F aluminium anodised, barrel tower bolts of extruded section with length of bolt 200 mm and fixed complete all as specified and directed

S&F 100mm butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, Type B-21 complete all as specified and directed.

S&F extruded aluminium alloy handles, fabricated type, anodised of size 150 mm complete all as specified and as directed.

S&F in repair stainless steel hinges of 75mm for cupboards of senso (as per 3D designs) including all connection fitting as complete all as specified and directed and approved by GE.

S&F Handles of senso (as per 3D designs) 150mm including all connection fitting complete all as specified and as directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staple/ wooden beads complete all as specified.

S&F in repair Stainless steel conduit curtain rod with PVC coating fancy type curten rod 19 mm dia of any colour including end globe as approved complete including side mounting.

S&F in repair door closer hydraulically regulated designation No-2 universal type of aluminium body fixed to door frames with screws or by welding suitable for door shutters of 701-805 mm in width & wt between 36-60 kgcomplete all as specified and directed by Engr-in-charge.

S&F in repair telescopic wall -bearing shelf closing channels ( exc 300mm but not exc 500 mm ) etc complete all as specified and directed.

S&F Europa cupboard locks complete all as specified and as directed.

S&F in repair 300 mm large Corner Glass Shelves including brass CP bracket complete all as specified and as directed.

S & F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

M&L for aluminium grills (Decogrill) and fixed including necessary glazing clips, anodised aluminium snap beading screws and aluminium fittings complete all as specified and as directed.

S&F of aluminium powder coated section, as in frame for door, window, ventilators,fix glazing and partitions of standard section and thickness as directed , cut and jointed together with cadium plated steel screws, plugs for fixing screws, etc. complete all as specified and as directed by the Engineer-in-Charge. Note-(i) Fixing of frame shall be as per manufacturers instructions and all fitting shall be paid under this item. (ii) Thickness of powder coating shall not be less than 50 micron. (iii) Frame shall be one or more rebate as per requirement at site.

Supply and fixing for aluminium alloy powder-coate) window frame with shutters open able type, with aluminium sections as per of “Jindal” section numbers for casement windows including aluminium alloy snap type beads, handles, aluminium barrel tower bolts and glazing clip, joint cleats, rubber gaskets etc., complete all as specified for series-B “ Jindal” section numbers for casement (a) Section for shutter 47.62x44.45x1.87 mm thick (b) Glazing clip weighing 0.259kg/mtr. (c) Windows shall be provided with 02 Nos. of tower bolt of size 125mm for single leaf shutter and 03 Nos. for double leaf. Handles shall be aluminium ‘D’ type handle of size 98mm and thickness 2.37mm weighing 0.875kg/mtr and 01 No on each openable leaf shall be provided. (Note : 1. The rates shall be inclusive of provision of and fixing of rubber packing/gasket. 2.Glass pane and wire gauge shall be measured and paid for separately.

Supply and fixing for aluminium alloy (powder-coated) door shutters with hollow aluminium sections as specified including aluminium powder coated snap type beads, dish type door handles, glazed clip joint cleats, rubber gasket, Mortice lock 4 levers (vertical type), two numbers of aluminium alloy anodized tower bolts 200mm long to each leaf, etc. including fixing frame to wall/RCC members with rawl plugs complete. Sections of doors shall be aluminium hollow sections as follows : - (a) Shutter top 83.50mmx44.45mmx1.87mm thick. (b) Shutter bottom 104.00mmx44.45mmx 1.80mm thick (c) Shutter vertical 83.5mmx44.45mmx1.87mm thick (d) Shutter middle 100.00mmx 44.45mmx 2.00mm thick (e) Gauging clip weighing not less than 0.097kg/metre (Note : 1. The rates shall be inclusive of provision of and fixing of rubber packing/gasket.

S&F rolled mild steel structural work in tubular trusses (frames), trussed, fixed with and including special shaped washer etc.complete using ERW or including butt welded tubes confirming to IS 1161-1998 complete all as specified and as directed.

M&L MS work as in wind ties for roof including securing bolts, drilling holes, notching for wire etc complete all as directed.

M&L for Mild Steel TMT steel bars of 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed.

M&L reinforcement using TMT steel bars of 06 to 08 mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed.

M&L prepainted 0.50 mm thick gavalume aluminium zinc coating AZ 150 GI based corrugated steel coloured Sheet in profile pattern having tensile strength of 550 Mpa as in roof covering & on chajjas fixed with self tapping screws etc all as specified and directed

S&F suspended prepainted false ceiling, self design, self texture, using chicago metalic (E grid) exposed suspended system, grid section size 600mm x 600mm comprising of GI powder coated main runner of dimensions 39mm x 24mmx 08mm thick (thickness comprising of GI /0.4+PPPCGS/0.3mm & weight of runner 1.35 Kg for 3600mm length) cross tee of dimensions 29mm x 24mm 0.8mm thick and thick wall angle 22.2 mm x 22.2mmx 0.65mm thick (thickness comprising of GI /0.35+PPPCGS/0.3mm & weight of angle 0.70 Kg for 3050mm lenght) with and including 4mm thick HPSC (high pressure steam cured) pre-primed, self embossed, texture designer board, water resistant termitant, fire resistant for insulation and acoustic purpose to be placed in the grid systemduly suspended with 4mm dia GI bar hangers fixed with steel dash through fasteners from purlins of the roof with butterfly clips (wt - 0.007 Kg/clip) hold down clips (wt-0.0035 Kg/clip) with provn of light fixture complete all as specified and as directed.

M & L for 75mm thick, PCC 1:3:6, Type C-1, using 20mm graded aggregate as in Plinth protection etc surfaces finished even and smooth with out using extra cement complete all as specified and as directed

M & L for 25 mm thick, PCC 1:2:4, Type B-0, using 12.5mm graded aggregate as in Sub base for flooring complete all as specified and as directed.

M & L for 100 mm thick, PCC 1:2:4, Type B-2, using 40mm graded aggregate as in Sub base for flooring complete all as specified and as directed.

M & L for 100 mm thick, PCC 1:4:8, Type D-2, using 40mm graded aggregate as in Sub base for flooring complete all as specified and as directed.

M&L for 60mm thickness of M 35 Grade Machine pressed precast concrete interlocking paver block of any shape and size with grey cement and pigment, confirming to IS 15658-2006 complete all as specified and as directed.

M&L Non skid coloured ceramic tiles 7 to 8mm thick square/ rectangular area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floor etc set and jointed in neat cement slurry and pointed in white cement with pigment to match, laid over and including 15mm thick cement screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for Vitriefied ceramic tiles 10mm thick of light shade (square/rectangular) polished area of each tiles not exceeding 0.36 sqm ove and including 20mm thick screed (1:6) bedding layer, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile complete all as specified.

M&L for glazed ceramic coloured tiles of size 450 x 300 x 6 to 7 mm, 600x300, 450x350 or 350x250 6 to 7mm thick on vertical surfaces such as skirting/ dado etc. ,set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile with & including rendering 10 mm thick cement plaster in cement mortar 1:4 finished rough to receive tiles complete all as specified and as directed.

M&L for 18-20mm thick black granite stone slab machine cut machine polished as in skirting/dado, cooking platform, jams, pillars, windows cills and the like laid over and including 10mm thick screed bed or backing coat in cement mortar (1:4) and jointed with grey cement slurry and pointed with white cement and with admixture or pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

M&L for rounding edges of granite stone slabs one edge such as in counter type WHB platform etc. complete all as specified and as directed.

M & L for rendering 5 mm thick in Cement Mortar 1:3 on fair faces of concrete surfaces of ceiling surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L 15mm thick rendering on concrete/brick surfaces in CM 1:4 mixed with water proofing compound as per manufactures instructions finished even and smooth without using extra cement complete all as specified . Note:- WPC shall be measured and paid saperately

M & L for rendering to brick / concrete surfaces, 15 mm thick in Cement Mortar 1:6, surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparing new plastered or un-plastered surfaces and applying two coats of oil bound distemper over 2mm thick birla wall care putty over chalk whitining on walls complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls by complete removal of existing treatment and applying two coat of oil bound distemper over a coat of 2mm thick birla wall care putty complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls by complete removal existing treatment and applying two coat of cement base paint over a coat of birla wall care weather putty (for external surfaces) over a coat of chalk whitining on walls complete all as specified and directed.

M & L for preparation of newly plastered wall surfaces and applying two coats of cement based paint over a coat of alkali resistant primer complete all as specified and as directed.

M & L for preparing newly plastered wall surfaces and applying three coats of white wash complete all as specified and as directed.

M&L for preparation of newly plastered surfaces and applying three coat of white wash as in ceilling complete all as specified and as directed.

S&F 5.5mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed.

S&F 4mm thick figured glass, pin headed type and glazing with oil putty in square n. exc 0.5 sqm in each pane complete all as specified and as directed.

S & F 12 mm thick toughned glass plain / designing pattern as directed by GE including all necessory accessories for fitting door/window/partion complete all as specified and as directed.

Supply & Fixed 12mm thick frosted glass fitted to walls or aluminium frame in toilets with necessary arrangements (Make: Saint Gobain or equivalent make & model as approved by GE) complete all as specified and directed.

M&L for painting to new steel surfaces of any description, over 10cm width or girth with two coats with synthetic enamel paint over a coat of red oxide primer including preparation of surfaces complete all as specified and directed.

M&L for painting to concrete surfaces of any description, over 10cm width or girth and applying two coats with synthetic enamel paint over a coat of primer including preparation of surfaces complete all as specified and as directed.

S& F 500 ltrs rotational moulded polythine water storage tanks (cylinder vertical with closed top) hoisted and fixed in position including ball brass valves, high pressure with polythene float and flynut complete screw for iron pipe or brass ferrule all as specified in SSR Part-I complete all as specified and as directed.

S & F 20mm bore ball valve high pressure PTMT with epoxy coated aluminium rod & high densitypolythene float ball and fly nut screwed for iron pipe complete all as specified.

S&F repair 20mm bore bib cock PTMT any colour high pressure screwed for iron pipe minimum weight 120 gms complete all as specified and as directed.

S&F in repair chromium plated Toilet paper holder complete all as specified and directed. Make- Jaquar ACN-1151N, complete all as specified and as directed.

S & F in repairs Towel ring brass chromium plated round type fixed with screws and wooden or plastic cleats Cat part No. CAN-1121N of make Jaquar or equivalent complete all as specified and directed.

S & F in repairs Towel rail 600 mm long and 20 mm dia brass chromium plated 'D' type fixed with screws and wooden or plastic cleats Cat part No. Alts 1581 of make Jaquar or equivalent complete all as specified and as directed.

Supply & fixed in repair for Towel Rack 600mm long with lower hangers (Cat Part No. ACN 1181S of Jaquar make or equivalent complete all as specified and directed.

S&F in repair, chromium plated, Soap dish holder complete all as specified and directed. As per Cat No ACN -1131N of Make : Jaquar or equivalent complete all as specified and directed.

Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors for 16mm (outer dia) bore of pipe including Brass elbow, Brass Tee, Male threaded brass adaptor, Female threaded brass adaptor and all necessary fittings etc complete all as specified and directed.

Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors for 20mm (outer dia) bore of pipe including Brass elbow, Brass Tee, Male threaded brass adaptor, Female threaded brass adaptor and all necessary fittings etc complete all as specified and directed.

Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors for 25mm (outer dia) bore of pipe including Brass elbow, Brass Tee, Male threaded brass adaptor, Female threaded brass adaptor and all necessary fittings etc complete all as specified and directed.

Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors for 32mm (outer dia) bore of pipe including Brass elbow, Brass Tee, Male threaded brass adaptor, Female threaded brass adaptor and all necessary fittings etc complete all as specified and directed.

S&F in repair PVC connection pipe of 450 mm long, 15mm size with PTMT nuts complete all as specified and as directed.

Supply and laying of GI steel tubing 25mm bore medium grade with replacement of US fittings laid in tranches /wall /floor and jointed including necessary fittnigs such as bends, elbow, tees sockets etc including necessary saddles and clamps complete all as specified and directed.

Supply and laying of GI steel tubing 20mm bore medium grade with replacement of US fittings laid in tranches /wall /floor and jointed including necessary fittnigs such as bends, elbow, tees sockets etc including necessary saddles and clamps complete all as specified and directed.

S&F 15mm bore tubes medium grade galvanized with all fitting such as socket, elbow, Tee tee, union and short length etc. and fixed complete to walls and ceilings or laid in floors of any length all as specified and directed by Engr-in-charge.

S&F vitreous china wash down water closet pan Padestal pattern white excluding fixing bolts, flushing cistern and flush pipe with and incl 'P' or 'S' trap and making good to floor to match with existing all as specified and directed.

S&F in repair Plastic water closet seat, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device complete all as specified and as directed.. Make- as approved by GE.

S&F in repair vitreous China squatting pan of pattern Orissa Pan, size 580 x 440 mm white with integral foot rests any pattertn (excl flushing cistern and flush pipe) complete and including provision of lime concrete bedding, connection to flush pipe, trap etc and making good complete all as specified and as directed.

Supply and fixing of single piece slim concealed flushing cistern with wall mounting frame , installation kit and "S-type drain pipe connection set for wall hung Wc of Make : Jaquar (Model : JCS-WHT-2400FS) including all fittings complete all as specified and directed.

Supply and fixing of flush control plate for concealed flushing cistern of Make : Jaquar (Model : JCP-CHR-292415) including all fittings complete all as specified and directed.

S & F in repairs Vitreous china ware wash hand basin, white, flat back of size 550 mm X 400 mm including brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including CI Brackets, cutting for and pinning in ends of brackets or erecting strand, 32mm bore PVC flexible waste pipe etc complete all as specified and as directed.

S&F for vitreous china counter top basin white colour of size 700x460mmx200mm Cat No ALS-WHT-85601 ALIVE range of make: Jaquar or equivalent quality make approved by GE including table top counter for fixing WHB of matching colour complete all as specified and as directed.

S&F for metro pole flush valves dual flow 32mm size (concealed body) with exposed shut off provision and 100mm square plate (3.0/6.0 ltr per flushing) including control cock and operating lever of make: Jaquar (Model: FLV-1089SQ) including all fittings complete all as specified and as directed.

S&F in repairs Wall hung WC with UF soft close seat cover, hinges, accessories set, size 385 X 595 X 385mm of Make : Jaquar (Model : KUS-WHT-35953 BIUFSM) including all fittings complete all as specified and directed.

S&F in repair brass chromium plated bottle trap 32mm bore for wash hand basin with inlet & outlet screwed for pipes or connection incl necessary packing union and cap complete all as specified and as directed.

Material and labour for drilling and taping cast iron/ductile iron water mains (in position) for branch connection of the internal dia 15 to 20mm including necessary fitings such as ferrules, nipple short pipe etc complete all as specified and as directed.

S & F 32 mm thick PVC waste pipe of minimum length 1 mtr for kitchen sink and WHB etc complete all as specified and as directed.

S&F Flush pipes to WC including all joints and making good of all disturbed portion complete all as specified and directed

S&F in repair Flush pipes to urinal including all joints and making good of all disturbed portion ( floor ) complete all as specified and directed

S&F jet spray with 1m PVC tube (stainless steel), chromium plated for vitreous china padestal pattern water closet complete all as specified and directed.

S&F vitreous China bowl urinal flat back of size 465x355x265mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern flush pipe and waste pipe) including connections to flushing pipe and out going pipes etc complete all as specified and directed

S & F for vitreous china urinal partition white of size 310x700 mm complete all as specified and as directed.

S & F chromium plated Urinal spreader of any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and as directed.

S&F PVC 10 litres capacity valveless ,syphonic action type low level flushing cistern ,white including flush pipe, cantilever brackets ,inlet, ball valve, float and handle, PVC connection 32mm dia, 450mm long etc complete all as specified and directed (Make: PRAYAG / CERA/ Parryware/Jaquar).

S&F in repair chromium plated health faucet with 8mm dia and 1.2 m long flexible tubes and wall hook suitable for EWC including nut/washer complete all as specified and as directed.

S& F in repairs chromium plated shower rose 125 mm size and 15mm dia with or without swivel joints including fixed to pipe or union complete all as specified and as directed

Supply & Fixed in repairs for over head Shower150X150mm square shape single flow, chromium plated with Gray face plate complete all as specified and as directed.

S&F in repair SS Shower Arm complete as specified and directed

S&F for stainless steel chromium plated single lever basin mixer Cat No. KUP-CHR-35011BPM of Make : Jaquar or equivalent make approved by GE including all necessary fittings comlete all as specified and directed.

S & F in repair 15 mm bore brass chromium plated Wash Basin Mixer for hot & cold water with long shank and fly nut complete all as specified and directed

S&F in repairs fancy type wall mixture of brass, chromium plated, 3 in 1 system with hot and cold arrangement, with provision for both hand shower & overhead shower complete all as specified and as directed.

S& F in repairs 15 mm bore bib tap cast copper alloy, chromium plated, long body fancy type with capstan headed, screwed down, screwed for iron pipe complete all as specified and directed.

S& F in repairs Stop valve / Angle valve fancy type cast copper alloy chromium plated screwed down high pressure with capstan heads screwed both ends for iron pipe or for union and fixed 15mm bore complete all as specified and directed.

Supply & Fixed in repairs for 15 mm bore concealed Stop valves and concealed body of concealed stop cock , (cat part No. KUP-35083KPM & ALD -083 of Jaquar make or equivalent make & model as approved by GE) complete all as specified and as directed.

S&F 20mm dia gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed complete all specified and directed

S&F 25mm dia gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed complete all specified and directed

S&F in repairs grating doom 100mm dia CP with waste hole (Min weight 25 grms) complete all as specified and as directed.

S&F 15mm bore pillar taps cast copper alloy fancy type chromium plated screwed down high pressure with or without lattered HOT or COLD with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and as directed..

S&F 110 mm dia PVC (SWR ) pipes Single socketed in any length with rubber ring jonits fixed to walls complete all as specified and as directed.

S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete all as specified and as directed.

S&F 110 mm dia PVC (SWR) bends any radius with access door complete all as specified and as directed.

S&F 75 mm dia PVC (SWR ) bends any radius with access door complete all as specified and as directed.

S & F 110 mm bore PVC [SWR] Junction Single [Double "T"] equal or unequal with access door complete all as specified and as directed.

S & F 75 mm bore PVC [SWR] Junction Single [Single "T"] equal or unequal with access door complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) vent cowl including jointing with solvent cement complete all as specified and directed.

S & F in repairs chinaware counter top Wash basins of size 525x415x140mm complete all as specified and as directed.

M&L for 75mm dia PTMT floor trap plain with grating including jointing with solvent cement complete all as specified and as directed.

M&L for 75mm dia CI floor trap plain with grating including jointing with solvent cement complete all as specified and as directed.

S&F in repair, Grating, square, 150mm size of PTMT (minimum weight 100gms) complete all as specified and directed.

Supply, laying and jointing 150mm nominal bore dia DWC ( HDPE double wall corrugated), socketed and sewage pipes having 6.0 mtr length, conforming to IS-16098 (Part-2) of SN-4 stiffness with and includung necessary jointing materials etc complete all as specified and directed. Make:- Ultra plus of make Supreme or equivalent brand , Kisan Mouldings Pvt ltd or fenotex or Durtonor Kaveri as approved by GE.

Supply, laying and jointing 200mm nominal bore dia DWC ( HDPE double wall corrugated), socketed and sewage pipes having 6.0 mtr length, conforming to IS-16098 (Part-2) of SN-4 stiffness with and includung necessary jointing materials etc complete all as specified and directed. Make:- Ultra plus of make Supreme or equivalent brand , Kisan Mouldings Pvt ltd or fenotex or Durtonor Kaveri as approved by GE.

M & L for concrete bed to drain pipes of size 150 mm bore packing under and haunching against the sides of pipes after they are laid and fitted in cement concrete, Type C2, 1:3:6, using 40mm graded stone aggregate complete all as specified and as directed.

M & L for concrete bed to drain pipes of size 200 mm bore packing under and haunching against the sides of pipes after they are laid and fitted in cement concrete, Type C2, 1:3:6, using 40mm graded stone aggregate complete all as specified and as directed.

M&L for SGSW drain pipes laid in trenches of 150 mm internal diameter of pipe and jointed as specified complete all as specified and directed.

M&L for 200 mm dia Reinforced concrete pipes, class NP 2 with one collar per length of pipe complete all as specified and as directed.

M&L for SGSW gully traps ,square or round mouthed type P 150mmx 150mm complete all as specified and as directed..

M&L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B-1 smooth finished ,and reforming benching as required for 100 mm internal dia of pipe complete all as specified and as directed.

Taking down carefully any type of old unserviceable point wiring (light, fan, socket bell or power) , complete with fittings such as switches ceiling roses, lamp holders sockets, regulators with PVC conduit surface /concealed or wooden patterns including sunken cast iron /pressed steel terminal boxes etc and making good the disturbed surfaces of walls, roof, floors etc to match with the existing surfaces complete all as specified and as directed.

Taking down carefully Main switch and Distribution boards any make and size complete all as specified and as directed .

M&L for Point wiring with PVC insulated 1.5 sq mm multi stranded copper conductor FRLSH cable 1100 volts grade drawn into and including concealed PVC conduit not less than 20mm (ISI marked) including all fitting and fixing accessories including sunk in cast iron/pressed steel terminal boxes duly painted with two coats of anticorrosive paint outside and two coats of aluminium paint inside, 2.8mm thick hylam brand laminated white Bakelite sheet cover for mounting of switches, sockets, fan regulators etc and PVC insulated 1.5 Sqmm multistranded copper conductor FRLSH cable as earth wire and making good the disturbed surfaces to match with the existing surfaces complete all as specified and directed.

(a) One light point/Bell point/fan point controlled by one switch.

(b) One socket point controlled by one switch on same board.

All as described in serial item No. 167 here-in-before, but with 1100 volts grade copper standard conductor FRLSH cable of size 2.5 Sqmm with 2.5 Sqmm solid copper conductor cable for 3 pin 15 Amp switch socket outlet independent board complete all as specified and directed.

S&F in repair for modular Switch piano flush type AC 230 volts 6 Amps one module, one way complete all as specified and as directed .

S & F Switch piano flush type AC 230 volts 5 Amps single pole one way complete all as specified and directed.

S & F Socket outlet 3 pin, 5 Amps and AC 230 volts flush type complete all as specified and directed.

S&F in repair for modular socket 2/3 pin, 6 Amps two module and AC 230 Volts flush type complete all as specified and as directed .

M& L White cover plate with frame, 3 module complete all as specified and directed by Engineer in charge Make: anchor/havells/plaza

M& L White cover plate with frame, 8 module complete all as specified and directed by Engineer in charge Make: anchor/havells/plaza

S & F switch socket combination 3 pin 5 and 16 Amps AC 230 volts flush type complete all as specified and as directed.

S & F Ceiling rose surface bakelite 65 mm x 50 mm three terminal AC 230 volts flush type complete all as specified and as directed.

Supply and fixing Single phase propeller type ventilating ( Exhaust fan) heavy duty AC 230 volts 300 mm sweep PVC body complete , including making holes of suitable size and making good the disturbed surface and shutters including electric connection with pvc flexible twin core copper wire from ceiling rose to Exhaust fan, nut & bolt complete all as specified and as directed.Make:Bajaj,havells or equivalent.

Supply & Fixing in repair sheet metal enclosure MCB DB double door [Acrylic], single pole and neutral, 240 volts, 8 way with 200 Amp, 10 KA breaking capacity rated bus bar with blanking plate wherever required and IP-43 degree protection complete all as specified & directed.Make : Legrand CAT NO 507611 / SIEMENS CAT NO 8 GB 32102RC8

S & F for in replacement MCB Single pole and neutral rated capacity 40 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.Make : Legrand DX3 DP CAT No 408637/ Siemens cat no- 5SL 42327RC

Supply and fixing in replacement MCB/Isolators single pole 240 volts upto 40 Amps, B Series complete all as specified and as directed .

Supply and laying Sand cushioning to under ground cable in trenches/existing cable trenches/ducts in layers of 8 cm deep before laying the cable and 15 cm deep after laying and stretching the cable complete all as specified and directed by Engr in charge. NOTE : Punned thickness only shall be measured and paid.

supply and laying the Brick covering with width equal to length of brick as mechanical protection to cable with well burnt sub class ‘B’ bricks laid dry flat complete all as specified and directed by Engr in charge.

M&L for GI Tubes,of size 40 mm dia light grade, galvanised, with all fitting , laid in trenches for protection of cable in road /drain crossing complete all as specified and as directed.

Supply & fix in replacement of LED Security Light Luminaire 25 watt 6000K with .high power LED cool white,CRI 75,+/- 5% supply voltage 220/240/50 Hz, light engine driver base.pole adapter,powder coated pressure die cast aluminium with heat resistant toughened glass with lens type,GI pipe 40 mm dia medium Grade not less than with 1.2 m.long in any shape with 2 nos of pole fitting clamps made out of MS flat , nuts and bolts and painting with aluminium paint. complete all as specified and as directed. Make:Havells cat part no: LHDAUU7PA7J025 or equivalent makes as mentioned here-in-after.

Supply & fixing, in replacement, Kit kat DB by SPN Distribution box double door, protection grade IP 43, in fine powder coated matt finish with best CRCA sheet fitted with shrouded neutral insulated pin type copper bus bar Din rail earth bar, 8 way conforming to IS 13032 & 8623 complete all as specified and directed ( Make : Legrand CAT NO 507621 / SIEMENS / Schneider (Electric) as approved by GE)

S&F in replacement LED light fitting square 57x57 CM Not less than 36 watt along with fixture Surface / Recessed /Pendent mounting LED luminaries with diffuser channel Luminaires ers, connector block, etc . Complete with all accessories internally pre-wired and including round wood block, connecting up with three core flexible flexible copper conductor cable suitable size complete all as specified and directed by Engineer in charge.Make: Philips cat part no: RC375B LED 36S/840 PSU W60 L660 S2 WH or equiv in Luker/havells

S&F in repairs Smart bright Batten Series, LED luminaire using LED 20 watt 110 Lumens/watt with diffuser which ensures uniform distribution and comfort, batten series features latest LEDs and delivers consistent light output, stable color start Extruded Aluminium housing, Energy efficient, Flicker free start Inbuilt driver unit, Suitable for wall and ceiling mounting using brackets with and including the luminaire testing on completion as per Standard Specification IEC 60598-2-1 / IS: 10322(Parts/Secl), (Make : Philips Cat part No BN 021 LED 22S 6500/4000 PSU GR S1 or equivalent makes as mentioned here-in-after

S&F in repairs Smart bright Batten Series, LED luminaire using LED 22 watt 110 Lumens/watt with diffuser which ensures uniform distribution and comfort, batten series features latest LEDs and delivers consistent light output, stable color start Extruded Aluminium housing, Energy efficient, Flicker free start Inbuilt driver unit, Suitable for wall and ceiling mounting using brackets with and including the luminaire testing on completion as per Standard Specification IEC 60598-2-1 / IS: 10322(Parts/Secl), (Make : Philips Cat part No BN 021 LED 22S 6500/4000 PSU GR S1 or equivalent makes as mentioned here-in-after.

Earthing complete with galvanised steel earth plate electrode 60 cm x60 cm x 6 mm thick buried directly in ground ,(Earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level ,connected to and including galvanised iron earth wire 4 mm dia by means of nut, bolts, check nuts and washers of galvanised iron or steel complete all as specified and directed including testing on completion including the material and labour of the following : - (a) Excavation and earth work for drilling hole for electrode in any type of Soil. (b) PCC pit in cement concrete 1:2:4 type B-1, Pre cast RCC cover with suitable handle 40 mm thick in PCC 1:2:4 type B-1, reinforced with welded steel wire fabric weighing not less than1.87 Kg/ Sq meter. (c) Funnel with watering pipe of GI 20 mm nominal bore light grade and lugs etc complete all as specified and directed (d) 15 mm nominal bore medium grade GI protection pipe 5 meter long for protection of earthing lead complete all as specified and directed. (e) Requisite quantity of common salt and charcoal. (f) Testing of earthing.

Supply , laying and testsilng cable XLPE insulated , screened, PVC bedded , galvanized , steel strip or wire armoured, electric power cables ( Heavy duty ) 1100 volts grade with stranded aluminium conductor of size 2 core 16 Sqmm complete all as specified and directed.

DEEPAK CONSTRUCTION

J.P ENTERPRISES