REPAIRS TO ROOF TREATMENT, PERIODICAL SERVICES AND CERTAIN OTHER BR AND EM WORKS AT DEO COMPLEX (RESIDENTIAL AND OFFICE COMPLEX) JAIPUR UNDER GE(S) JAIPUR

Amount

Taking down cement plaster any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M&L for rendering 5 mm thick in CM 1:3 on RCC ceiling surface and finished even and smooth with out using extra cement complete all as specified and directed .

M&L for rendering 10 mm thick in CM 1:6 on fair faces of brick or concrete surface of wall and finished even and smooth with out using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls of any description with 1 mm thick wall putty and applying two coats of oil bound distemper complete all as specified and directed.

M&L for preparation of newly plastered surfaces of ceiling and applying two coat of oil bound distemper over and including 1 mm thick wall care putty complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F mild steel framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings,frame work of watertanks and similar work conforming to Fe -290 Gde E-165 complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S&F Pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St -240 complete all as specified and directed.

S & F in repair for Providing 35 mm thick precast sand stone louvers and jallies including precast vertical column as per specified , including moulding but excluding frame set in CM 1:4 complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding etc (but not backing) and removing rubbish off the premises complete all as specified and directed.

S&F light shade vetrified ceramic tiles double charge edge cut 10mm thick ( square/ rectangular ) polished, area of each tiles exceeding 0.36sqm but n exc 0.42 sqm in floor etc set and jointed in neat cement slurry and pointed in white or colour cement to match over & including 15mm thick screed bed in CM (1:6) finished fair and even complete all as specified and directed.

S&F light shade vetrified ceramic tiles double charge edge cut 10mm thick ( square/ rectangular ) polished, area of each tiles exceeding 0.36sqm but n exc 0.42 sqm in vertical surface such as dado / skirting / risers to steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement including 10 mm thick rendering in cement mortor 1:4 complete all as specified and directed.

M&L for vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles over & including 15mm thick screed bed in CM (1:6) finished complete all as specified and directed.

M&L for vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished area of each tiles not exceeding 0.36 sqm in vertical surface such as dado / skirting / risers to steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles over and including 10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for glazed ceramic coloured tiles 350 x 250 x 7 mm / 450 x 350 x 7 mm thick on vertical surface such as dado / skirting / risers to steps etc jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles over and including rendering 10 mm thick in cement mortor 1:4 complete all as specified and directed. Note- (i) The size of tiles (except thickness) may be varied during execution without any price adjustment.

M&L for non skid ceramic coloured tiles of design as approved 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed in cement mortor 1:6 complete all as specified and directed.

M&L for Machine cut kota stone slab flooring mirror finished 20-25 mm thick (each slab not less than 0.25 sqm) over and including cement screed base 20mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for Machine cut kota stone in riser of steps, skirting, dado and pillar mirror finished 20-25 mm thick over and including cement base rendering 10mm thick in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite as in floor over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L 20mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

M&L for chequered cement concrete tiles 20 cm x 20 cm x 22 to 25 mm thick set, jointed and pointed in neat cement slurry as in floors with grey cement and no pigments over and including 15 mm thick screed bed in cement mortor 1:6 complete all as specified and directed.

Demolition of cement concrete un reinforced in ground floor and paving n exc 15 cm thick (below or above ground level) complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness, laid bedded and pointed in any mortor in floor, apron etc complete all as specified and directed

Material & Labour for machine pressed precast concrete interlocking paver block of approved shape and size of 60 mm thickness, with minimum compressive strength of 35 N / Sqmm (M-35 grade), without correction factor for chamfering, made in rubber moulds with 0.50 mm thick scratch proof lacquer coating, top surface with white cement and pigment laid over and including 20 mm thick (compacted thickness) sand bed complete.

All as per item No 26.00 above but except tiles

M&L for 100 mm thick Cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base complete all as specified and directed.

M&L for 40mm thick sand stone for vertical and horizontal surface slabs polished, set and jointed in cement and stone dust mortar 1:3 and pointed in cement mixed with approved pigment to match and all as directed by Engr-in-charge.

S&F in repair bib taps brass long body screwed down, screwed for iron pipe or for brass ferrule fancy type chromium plated of 15 mm bore dia of pipe complete all as specified and directed.

S&F in repair two way bib tap 15mm bore cast coper alloy CP fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for union complete all as specified and directed.

S&F in repair CP stop valve fancy type, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe for 15 mm bore pipe complete all as specified and directed.

S&F in repair Single Piece-WC with soft close seat cover, Hinges, Fixing Accessories, Accessories Set and Cistern fittings, including P/S trap complete all as specified and directed.

S&F in repair wall hang Single Piece-WC with soft close seat cover, Hinges, Fixing Accessories, Accessories Set and Cistern fittings, including P/S trap all as specified and directed.

S&F in repair brass CP health faucet 1.2m chain long easy flex tube in chrome finish & wall hook complete all as specified and directed.

S&F in repair brass CP toilet paper holder with flap chrome finish & wall hook complete all as specified and directed.

Supply and fixed in repair vitreous china wash hand basin, white of size 550mm x 400mm with pedestal including and 32mm dia brass chromium plated waste coupling and PVC waste pipe complete including angle iron brackets complete all as specified and directed.

S&F in repair 15 mm bore dia of pipe pillar taps cast copper alloy, with capstan head chromium plated screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

Supply and fix in repair white vitreous china table top basin of size 435 mm x 700 mm x 135 mm fixed in position as per manufacturer instruction and connecting to drain pipe complete all as specified. Make: Jaquar Cat No ARS-WHT- 39903 or equivalent of make mention Appx B

S&F in repair CP Bottle Trap (with Internal Partition) 32 mm Size with 250mm & 190mm Long with all Connection Pipes complete all as specified and directed.

S & F in repair 15 mm dia Angle valve, cast copper alloy chromium plated , screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions & fixed complete all as specified and directed.

S&F in repair WHB mixer single lever 15mm bore CP fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for union complete all as specified and directed.

S&F in repair white vitreous china wash down water closet pan (pedestal pattern) with PVC seat cover with mild steel chromium plated or aluminised hinging device including connection to drowm pipe and flushing pipe all as specified.

S & F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repair Brass chromium plated shower rose 150mm x 150 mm size with or without swivel joints, any size, including fixint to steel pipe or union complete all as specified and directed.

S&F in repair kitchen mixer 15mm bore cast coper alloy CP fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for union for kitchen complete all as specified and directed.

S & F in repair PVC valveless, syphonic action type flushing cistern 10 litres capacity, low level, white with inlet, ball valve, float and handle incl brackets & flush pipe of polyethylene of low or high density or PVC, 32mm dia suitable for low level cistern complete all as specified.

Taking down chowkats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame) and removing from site complete all as specified and directed.

Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter (without taking off shutter from the frame) and removing from site complete all as specified and directed.

M&L Powder Coating (minimum thickness of powder coating 50 micron) Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed

S&F Powder coated (minimum thickness of powder coating 50 micron) Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed. Note:- Quoted rate shall be deemed to include 4 mm thick Tinted glass.

S&F Powder coated (minimum thickness of powder coating 50 micron) Anodised aluminium window and ventilator shutters, fixed/ sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed. Note:- Quoted rate shall be deemed to include 4 mm thick Tinted glass.

S&F 4.8 mm thick sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane, complete all as specified and directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F Mortice locks with two levers (vertical type),mild steel body of size 100 mm long complete all as specified and directed.

S&F for 30 mm thick Flush Shutters, Solid core construction, with block board core and both face is covered with plywood face panels free from twist or wrap in plane, complete all as specified and directed

M&L 0.9 mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.

S&F Second class hard wood 30 mm thick factory made glazed and skeleton shutters, open rebated and prepared to receive glass , gauze etc with out sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauge etc, sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) complete all as specified and directed.

S&F 35 mm thick second class hard wood rail and style plain framed factory made panelled shutter (two panel) with lock rail and panel of 9 mm BWP commerical ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F SS tower bolt of extruded section, 150mm length of bolt and fixed with screws, complete all as specified and directed.

S&F Stainless Steel sliding door bolt with hasp, staple (bolt type) and fixing bolts of 300 mm length of bolt complete all as specified and directed.

S&F Mortice lock with two levers (vertical type),stainless steel body of size 100 mm complete all as specified and directed.

S&F SS handles 150mm size, complete all as specified and directed.

S&F 125mm size,SS, handle and fixed with screws complete all as specified.

S&F aluminium, anodised, barrel tower bolts of extruded section 125 mm long complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of steel of any description, over 10cm in width or girth and apply two coat of synthetic enamel paint over a coat of zinc crome primer complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of wood and wood based surfaces of any description, over 10 cm in width or girth and apply two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F Butt hinges,heavy weight, cold rolled mild steel 100 mm long complete all as specified and directed.

M&L in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed.

S&F in repair door closer hydraulically regulated designation No 3, universal type, suitable for door shutter of weight between 61 to 80 Kg of aluminium (Die cast) body complete all as specified and directed.

S&F in repair Mortice lock with 4 levers (vertical type),mild steel body of size 100 mm long complete all as specified and directed.

S&F in repair stainless steel barrel tower bolts with bolt 100 mm long complete all as specified and directed.

S&F in repair stainless steel sliding door bolts not less than 12 mm dia of 300 mm length repair complete all as specified and directed.

S&F in repair 150mm size, stainless steel, handle and fixed with screws complete all as specified and directed.

S&F in repair floor door stopper of stainless steel fixed in floor, over all length of cover plate 150 mm complete all as specified and directed.

S&F in repair 25mm thick block board flush shutters for cup board solid core construction and plywood on both side face panels covered with decorative face veneers. Exposed edges of shutter to be provided with 6mm thick teak wood lipping. The thickness of lipping shall be 12mm for sides on which hinges are to be provided complete all as specified

M&L 18/19 mm thick block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame work complete all as specified and directed.

S&F Mild Steel Locks , cupboard grade 1 size 65mm of 2 levers. etc complete all as specified and directed

S&F 'L' or 180 degree or 110 degree hinges of extruded brass body fixed with cadmium coated screws complete all as directed of size 75 mm complete all as specified and directed

S&F 75mm size bright finished brass handle of approved shape & design fixed with cadmium coated screws on the drawer/cupboard/kitchen cabint drawers complete all as specified and directed

S&F magnetic catches for cabinets of size 50 mm complete with striking plate & magnetic stud complete all as per approved sample complete all as specified and directed

S & F 75 mm Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed

S&F mild steel Hasp & staple safety type stove enameled black including bolt to hinge plate and fixed with with screws 75 mm in size complete all as specified and directed

M&L for reparing of cracks by cutting out cracks to V-section of wide n exc 25 cm in existing roofs,parapet wall or terracing, cleaning out and filling solidly with a Thermagrout by cemco etc complete all as specified and directed.

M & L for cleaning the surface with water to remove all loosely adhered material and dust and applying two coat Mix wonderproof 2 (Dr. Fixit Dampguard or equivalent + OPC Cement putty) covering area 0.6-0.8 sq mtr/kg/coat) included putty and wonderproof all as per specified by Engr-in-Charge.

Demolition of PCC in roof covering, kerbs, roof kerbs, benching, coved fillets etc including old decayed water proofing treatment of any type complete all as specified.

M&L for surface preparation by removal of all loose particle to ensure clean, smooth and dry surface and laying 25 mm thick PCC type B-0, (1:2:4) using 12.5mm graded stone aggregate finished even & smooth without using extra cement to cover negative slope including WPC @ 3% weight of cement.

M & L fibre reinforced, UV resistant elastomeric liquid applied water proof coating over cementitious surfaces, highly elastic and hairline crack bridging capacity (elongation 250-350%), non toxic, VOC complaint water based coated in three layers first being priming coat, forming complete tihckness as metioned by OEM and complete all as specified and directed. Make:- Asian/Berger/Sika or equivalent

M&L for complete removal of existing treatment of wall by mechanical means and applying two coat of oil bond distemper over one coat primer over and including 1 mm wall care putty on plaster surface/concrete surface complete all as specified and directed.

M/L Complete removal of existing treatment of old plastered wall surfaces and Washing, rubbing down and stopping of painted surfaces and applying two coats of exterior emulsion paint by mechanical means over including 1 mm wall care putty complete upto two/three storey building including scaffloding arrangement complete all as specified and directed.

M&L for preparation of old painted surfaces of wood and wood based surfaces of any description, over 10 cm in width or girth and apply one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted surfaces of steel of any description, over 10cm in width or girth and apply one coat of synthetic enamel paint complete all as specified and directed.

M&L for Preparation of old painted surfaces of ceiling including washing, rubbing down and stopping holes, trading oil and greasy spots and applying two coat of Distemper oil emulsion complete as specified and directed.

M & L for cleaning and polishing of sand stone by mechnical means in vertical and horizontal surface upto two/three storey building including scaffloding arrangement all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials and making good disturbed surfaces of walls, floors etc complete all as specified and as directed.

M&L Point wiring complete with 1.5 Sqmm single core PVC insulated and sheathed multi stranded copper conductor FRLS cable of 1100 V grade PVC insulated and sheathed cable inclosed in concealed PVC conduit 20 mm dia medium grade with all accessories ISI marked, including MS sunken box for mounting fitting like switches, sockets fan regulators modulor type etc. including 1.5 sqmm single core PVC insulated but unsheathed copper earth continuty conductor to common earth and connected FRLS cable 1100 V grade as continuous earth wire to earth dolly for followings:-

One light/fan/ bell point controlled by one, one way switch.

One 3 pin 5 Amp socket outlet on same board with other switches.

One 3 pin 5 Amp socket outlet on independent board with other switches.

One light point controlled by two, 2 way switches

All as per item No 98.00 above but with 2.5 Sqmm FRLS copper cable for 3 pin 15 Amps socket outlet on independent board, including 2.5 Sqmm FRLS copper cable continuous earth wire and connecting to common earth dolly.

All as per Item No 98.00 above but with 4 Sqmm FRLS copper cable for 3 pin 15 Amps socket outlet on independent board, including 4 Sqmm FRLS copper cable continuous earth wire and connecting to common earth dolly complete all as specified and as directed.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including PVC casing caping medium grade not less than 20 mm size ISI marked ivory colour with all conduit fittings / fixing accessories terminated in modular sunken boxes for mounting switches, sockets, fan regulators as required complete all as specified and as directed. (Note-1. The cost of cutting chases in stone/bricks masonary and making good disturbed surfaces using CM 1:3 shall deemed to be included in quoted rate of the concealed wiring.)

One light/fan/ bell point controlled by one, one way switch.

One 3 pin 5 Amp socket outlet on same board with other switches.

One 3 pin 5 Amp socket outlet on independent board controlled by one, one way switch.

All as per Item No 101 above but with 2.5 Sqmm FRLS copper cable for 3 pin 15 Amps socket outlet on independent board, including 2.5 Sqmm FRLS copper cable for earth wire complete all as specified & directed by Engr-in Charge.

S&F switch, flush type, piano type 230/250 volts complete all as specified and as directed.

Single pole, one way 6 Amp rating

Single pole, one way 16 Amp rating

Bell push flush type, 6 Amp rating

Single pole, two way 16 Amp rating

S&F Socket outlet flush type of following type:-

Socket outlet 2-in-1, 3 Pin 06 Amp rating

Socket outlet 2-in-1, 3 Pin 16 Amp rating

S&F electric Bell Ding Don AC 230volts single pole complete all as specified and as directed.

Supply & fixing lamp holder PVC body with back plate complete all as specified and as directed.

M&L Ceiling rose surface bakelite 65x50mm, three terminals.

Supply and fixing of stepped type electronic fan regulator flush type

Supply & Fixing LED Batten 20 watt wall mounted batten with aluminium housing & integrated electronic driver complete all as specified and as directed.

All as per item No 109.00 here in before, but LED light fitting 1 x 8/10 W ,240 volt( size-2 feet) complete all as specified and as directed.

S&F LED retrofit lamp ( size-4 feet) 18watt Regal Batten for LED tube, universal batten for T5 lamps surface/wall mounting IP 20 with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed.

Supply and fixing bulk head light of 10 watt luminaries including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

S&F security lights LED 35 W Energy saving & Environmental friendly long life versatile pressure die cast aluminium IP 66, efficacy > 100 lumen/watt, 5700 K, PF >0.90 LED Wall mounted Light Luminaries are made of die casted aluminium body and toughened glass cover for uniform light spread including bracket made out of suitable size of GI medium grade 15mm dia tubing and fixed with clamps nuts and bolts, washer complete all as specified and as directed.

S&F Retro LED T-8 tubular lamp IP 20 linear LED T8 20 watt with extruded aluminium body, PC diffuser and inbuilt driver complete with inbuilt driver complete all as specified and as directed.

S&F Decorative box type fitting, Blue coloured end caps complete for Retro LED T-8 tubular lamp 16 watt IP 20 complete. with all accessories pre-wired twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed.

M&L Sub main wiring with two runs of 6 Sqmm single core FRLS PVC insulated unsheathed multi stranded copper conductor cable 1100 volts grade drawn through and including of 25mm bore PVC rigid conduit medium grade with conduit accessories and fixed to the surface of wall/ ceiling including 6.0 Sqmm FRLS PVC insulated copper conductor earth continuity wire complete all as specified and as directed. (length of 2 Nos. 6 Sqmm conductor cable, 1 no 6 Sq mm conductor earth continuity cable & 25 mm bore PVC conduit medium grade shall be measured as one unit length)

Taking down sub main wiring of aluminum/copper without PVC/ steel conduit complete all as specified and as directed.

Taking down sub main wiring of aluminum/copper with PVC/ steel conduit complete all as specified and as directed.

S&F in repair factory made, sheet distribution boards, double door protection class IP-42 double door type suitable for mounting MCB/ MCCB, confirming to IS-13032, IS-8623, BS-5484 with minimum 200 amps, copper bus bar of the under mentioned rating complete all as specified and as directed.:-

SP&N 4 ways

SP&N 8 ways

SP&N12 ways

TPN 4 ways

S&F in repair MCB 'C' curve 10 KA confirming to IS-8828 : 1996, IEC-898 : 1995 rupturing capacity of the under mentioned type and rating complete all as specified and as directed.:-

SP 6 to 32 amps

SPN 63 amps.

TPN 63 amps.

M&L Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6.3 mm buried directly in ground (earth pit not less than 2.25 meters deep below normal ground level ), with top edge of the plate not less than 1.5 mtrs below normal ground level , connected to and including galvanised earth strip 25 X 4 mm by means of galvanised iron bolts , nut and washers and connected to other end to main panel board duly protected by galvanised iron pipe 32 mm dia " light grade " earth plate surrounded by packed layer of coat dust and common salt 15 cm thick all around bottom and top including watering pipe 20 mm bore of galvanised iron " medium grade " with funnel all as shown on electrical plate No 3 of SSR part -I and connecting to earthing testing on completion including cast iron cover frane and PCC 1:3:6 type C-2 using 20 mm grade stone aggregate as in earthing pit with cast iron cover and frame including necessary earth work etc complete all as specified and as directed. (Note : PCC Chamber shall be constructed at least 1.5 mtrs away form the earth electrode of the earth pit and pipe for watering shall be provided in slanting manner).

Supply and fix in repair sheet metal enclosure complete with metallic plug and socket heavy duty modular type 3 pin (2P + Earth), 20 amp rating single phase 240 volts complete with MCB SP 20 amp “C” series complete all as specified and as directed.

S&F in repair switch, piano type 230/250 volts complete all as specified and as directed.

Single pole, one way 6 Amp rating

Single pole, one way 16 Amp rating

S & F in repair fan regulator piano Type 230/250 volts complete all as specified and as directed.

S&F in repair Socket, piano type 230/250 volts complete all as specified and as directed.

Socket outlet 2 in 1, 3 pin 06 Amp rating.

Socket outlet 2 in 1, 3 pin 06 and 16 Amp rating.

S& F in repair LED 1x36 W 4 Pin 230 V complete all as specified and as directed.

S & Fixing PVC Rectangular block for mounting switches sockets fan regulator etc with 3 mm thick plastic laminated sheet cover of size 100mmx100mm and 50 mm deep complete all as specified and as directed.

S & Fixing PVC Rectangular block for mounting switches sockets fan regulator etc with 3 mm thick plastic laminated sheet cover of size 175mmx100mm and 50 mm deep complete all as specified and as directed.

S & Fixing PVC Rectangular block for mounting switches sockets fan regulator etc with 3 mm thick plastic laminated sheet cover of size 200mmx150mm and 50 mm deep complete all as specified and as directed.

S & Fixing PVC Rectangular block for mounting switches sockets fan regulator etc with 3 mm thick plastic laminated sheet cover of size 250mmx200mm and 50 mm deep complete all as specified and as directed.

S & Fixing PVC Rectangular block for mounting switches sockets fan regulator etc with 3 mm thick plastic laminated sheet cover of size 350mmx300mm and 50 mm deep complete all as specified and as directed.

ANKIT BUILDERS (BID ID -3132041)

M/s KAKSI ENTERPRISES (BID ID -3132984)

MSR INFRATECH (BID ID -3132024)