Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹61.0 LAccepted-AOC | L1 | Accepted-AOC Being lowest tenderer | |
| 2 | L2₹61.5 L+₹50,684.92 (0.83%)Rejected-Finance INDEX NO B 132 HQ ADG P CHENNAI NO 229 ANGAPPAN STREET MITTANAMALLI AVADI IAF CHENNAI 600 055 | CHENNAI | CHENNAI | TAMIL NADU | 600055 | L2 | Rejected-Finance Being other than lowest tenderer |
Tender Value
₹56 L
EMD Value
₹1.1 L
Closing Date
24 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Shri. Narinder Singh, IDSE, SE(SAG)
COMMANDER WORKS ENGINEERS CHENNAI PALLAVAN SALAI CHENNAI 600 002
PROVN OF GUARD ROOM AND ALLIED WORKS IN DC II, III, MAG 6 AND OD OFFRS MESS UNDER GE AVADI
2022_MES_569410_1
87664
Open Tender
Civil Works
Works
180 days
AVADI
As per tender documents
8 documents required · 8 mandatory
₹1,000
GE AVADI
₹1.1 L
Yes
21 Feb 2023
15 Dec 2022
30 Jan 2023
15 Dec 2022
24 Jan 2023
6 Jan 2023
15 Dec 2022 - 21 Dec 2022
Amount
REVISED BOQ UPLOADED ON 02 JAN 2023
SCH A Part - I
M&L for Surface excavation not exc 30 cm deep and averaging 15cm deep and getting out in any type of soil
Excavation of trenches, n exc 1.5 m wide and n exc 1.5 m in depth, for foundation etc or for sharts, wells cessipts, manholes, pier holes etc not exc 10 Sqm on plan and n exc 1.5 m in depth and getting out in any type of soil.
Ditto all as per Item No 4.00 above but exc 1.50 Mtr depth
Excavation over area exc 1.5 m wide but not exc 1.5 m in depth, for foundation etc or for sharts, wells cessipts, manholes, pier holes and getting out hard/dense soil.
Ditto all as per Item No 6 above but exc 1.50 Mtr depth
M&L for PCC 1:5:10 type E-2 (Using 40mm graded crushed stone aggregete) as in foundation, filling and mass concrete.
Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter
M&L RCC M-30 design mix as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete
Use & waste Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and as directed
M&L RCC M-30 design mix as in Columns, pillars, piers, posts and struts
Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.
RCC M-30 design mix as in lintel over 1.5 mtr span complete all as specified and directed
Formwork to soffits to roof projection chajja facia complete all as spacified and as directed.
M&L RCC M-30 design mix as in roof projection chajja and facia.
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping)
M&L RCC M-30 design mix as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in the shelves and the like
M&L for rendering 10mm thick in cement mortar (1:3) over roof surface/ chajja etc when the concrete is green finished even and smooth without using extra cement mixed with liquid Water proofing compound complete all as specified (Note - liquid Water proofing compound will be measured and paid seperately)
Preparing the rendered surface thoroughly to remove all loose particles, dirt / dust particles and applying a uniform coat of blown grade bitumen VG-10 @ 1.20 kg/sqm conforming to IS 702 over a coat of bitumen primer @ 0.40 Litres / Sqm followed by APP membrane reinforced with polyster non woven fabric 3mm thick weighing not less than 3.6 kg / sqm laid on primed surface by torched application followed by a finishing coat of solar reflective aluminium paint @ 0.10 litres / Sqm complete all as specified and as directed.
S&F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality confirming to IS 432
Ditto but 6 mm to 8 mm dia
Ditto- but 5 mm dia and over upto and including 10mm dia in stirrups, spacers and binders
M&L Brickwork with flyash bricks, straight or curved on plan exc 6 m mean radius, built in CM 1:6
M&L Brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick wall, built in CM 1:4
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm
Removing excavated materials n exc 50 Mtr and depositing where directed at a level not exc 1.5M above the starting point in soils
M&L for 10 mm thick rendering in CM 1:6 finished even and smooth without using extra cement complete all as spacified and as directed.
M&L rendering 10 mm thick on other than fair faces of brick surfaces or concrete surfaces in CM 1:6 with floating plaster 5mm thick in CM 1:4 mixed with water proofing compound complete all as specified and directed. (Note : WPC will be measured and paid seperately)
M&L Rendering 5mm thick on ceiling, in cement mortar 1:3 finished the surface even and smooth without using extra cement, complete all as specified and as directed.
M&L for preparing newly plastered wall surfaces (Internal) and applying three coat of white washing complete all as specified and as directed.
Prepration newly plastered surfaces of wall and applying two coats of cement base paint to external wall surface complete all as specified and directed
M&L for prepration of new plastered surfaces of celling and applying three coat of white wash complete all as specified and as directed.
M&L for spreading and levelling in excavated material filling in floors or pavings laid in layers not exceeding 15cm thick, spread, levelled and rammed including watering etc. complete all as specified and as directed
Treating the backfill in contact with foundation at the rate of 7.5 litres of ATT emulsion 20 EC per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified and as directed.
Treating the top surface of filled Earth at the rate of 5 Litres of emulsion per squre meters of surface area.
Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed.
Treating the soil alongwith external perimeter of building at the rate of 2.25 litres of ATT emulsion 20 EC per metre of the perimeter wall complete all as specified and as directed.
M&L for broken stone or boulders hardcore of gauge not exceeding 63mm deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface all as specified.
M&L Cement concrete type D-2, 1:4:8 mix (using 40mm graded aggregate) as in Subbase of flooring of 75mm thickness
M&L Non-skid Joint free ceramic coloured tiles, minimum 7mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match of superior finish, over screed bedding 20mm thick in CM 1:6 complete all as specified and as directed.
All as per item No 41 above, but on vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and incl backing coat of 10mm thickness in CM 1:4, complete all as specified and as directed.
M&L PCC 1:3:6 type C1 as in plinth protection of 50 mm thickness finished fair and even without using extra cement all as specified.
Forming Construction joint 30mm deep x 10mm wide, filled with sealing compound grade 'A' comprising 1 Part of heated bitumen 85/25 grade and 3 parts of sand (all by weight) complete all as specified and as directed.
Supply only Liquid integral Water proofing compound.
S&F Steel window with side hung shutter incl box type hinges ,steel handle and steel peg stay complete without glazing bars dovetailed or welded incl one shop coat primer.
S&F Steel ventilators with centre hung shutter including two pairs of brass cup pivots, catch spring and pulley wheel, complete incl one shop coat primer.
S&F frame work such as grills, gratings etc with ends of bars shoulderd and / or rivetted or forged into spikes framed guard bars etc confirming to Fe 290 Gde E-165
M&L preparing new steel surfaces over 10cm in width or girth and applying two coats of synthetic enamel paint complete all as directed.
S&F second class hard wood plain, solid, straight, chowkats and frames, wrought framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and as directed .
M&L cement concrete type C-1 (1:3:6) 20mm graded stone aggregate as in bed blocks for fixing hold fasts or any other purpose all as specified.
S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete
M&L Preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, not otherwise described, and treating small articles such as stop, covers, gully gratings, holdfasts, ends of posts, backs of chowkats, etc., area n exc 0.1 sq. m each with tar or coal tar black paint
M&L for Preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, not otherwise described, and treated with tar or coal tar black paint
S&F 30 mm thick flush door shutter solid core construction with block board core and plywood face panels commercial type on both side complete all as specified and directed.
S&F 20 mm thick flush door shutter solid core construction with block board core and plywood face panels commercial type on both side complete all as specified and directed.
S&F 2nd class H/W 20 mm thick Boarding both side planned, supplied & fixed with nails in shelves; Partitions and shelves of built-in cupboards, almirahs, book cases, toilet boxes, racks, pelmets and similar work (except flooring and skirting) complete all as specified and directed.
S&F 30 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a);supplied and fitted to chowkats
S&F for solid PVC door frame of size 50x47mm made out of 5mm wood grain coloured printed PVC sheet reinforced with MS square tube, in opening as per specification and drawing. Make: (Rajashree or equivalent)
S&F factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick (stiles) with 2, 4 or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face as per specification and drawing. Make : Rajashree or equivalent)
M&L for preparation of new wood surfaces of any description over 10cm width or girth and applying two coats of Synthetic enamel paint over a coat of pink primer complete all as specified & directed.
S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.00mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.
M&L sheet glass 4 mm thick frosted Glass glazing with oil putty in squares exc 0.50 Sqm in each pane all as specified.
S&F 300mm mild steel ordinary rat rail rod pattern springs including roller and roller plate complete all as specified & directed.
S&F Mild steel butt hinges medium weight cold rolled 100mm size fixed complete all as specified & directed.
S&F 300 mm long Aluminium alloy anodised sliding door bolts with hasp and staple(bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.
S&F for 300mm length aluminum, anodised, barrel tower bolts of extruded section alloy complete all as specified and directed.
S&F for 150mm length aluminum, anodised, barrel tower bolts of extruded section alloy complete all as specified and directed.
S&F of extruded anodised aluminium alloy handles 150mm long, fabricated type complete all as specified & directed.
S&F of extruded anodised aluminium alloy handles 100mm long, fabricated type complete all as specified & directed.
S&F of 125mm long Hasp and staple, safety type, Aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified & directed.
S&F of Aluminium Hat pegs, solid body, 125mm to 175 mm complete all as specified & directed.
S&F floor door stopper 150mm size of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and as directed.
S&F Harrison Curtain rails, mild steel, chromium plated of thickness 40-6 microns, outer dia 19/20mm inner dia 16mm with fixing brackets, stops, rollers etc. complete all as specified and as directed.
Supply and laying of 15mm bore Tubes, 'Medium grade' galvanised,with all fitting and fixed complete to walls and ceilings or laid in floors/trenches etc all as specified and as directed by Engr-in-Charge.
Ditto as above but of 20 mm dia
Ditto as above but of 25 mm dia
S&F Vitreous china water closet pan (pedestal pattern) white with PVC (SWR) ‘P’ trap of 110mm. PVC Connector and fixing bolts etc including plastic water closet seat, white closed pattern with flat bottom and cover and mild steel chromium plated hinging device
S&F PVC flushing cistern syphonic action type, low level 10 liter capacity incl flush pipe of polyethylene of low or high density of PVC 32 mm dia, for low level cistern and all accessories. complete all as specified and as directed.
S&F PVC (SWR) floor trap plain with grating including jointing with solvent cement of 75 mm dia. complete all as specified and as directed.
S&F Bib tap cast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for union pipe or brass ferrule & fixed to 15mm dia pipe complete all as specified and as directed.
S&F Brass chromium plated shower rose 125mm size fixed to 15mm dia pipe complete all as specified and as directed.
S&F Stop valves, cast copper alloy fanct type chromium plated 15mm bore, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.
S&F Gun-metal, globe or gate valves 20mm bore with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.
S&F Vitreous China wash basin, white, flat back, size 550x400mm with padestal including waste, chain and plug and porcelain stopper, brackets and Pillar taps cast copper alloy with capstan heads, chromium plated screwed down high pressure with or without lettered Hot or cold with long screwed shanks and flynuts, scewed for union pipe and fixed to 15mm dia pipe all as directed by Eng-in-Charge
S&F Rotational moulded polyethylene water storage tanks triple layer with Float valve 20mm bore (cylindrical vertical with closed top) hoisted and fixed in position 1000 Ltr Capacity all as specified in SSR Part I.
S&F PVC connections 15mm size with PTMT nuts of length 450mm. complete all as specified and as directed.
S&F tubular towel rail brass chromium plated, 20mm dia, complete all as specified & directed.(Make : Prayag / Commander, Jaquar)
S&F Spun Cast iron rainwater socketed pipes with cement joints, with ears of 100mm dia complete all as specified and as directed.
S&F Cast Iron Spun Cast 100mm dia Offsets, projection upto 150mm complete all as specified and as directed.
S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors of 75mm bore complete all as specified and as directed.
S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls of 75mm bore complete all as specified and as directed.
S&F PVC (SWR) bends 110mm radius complete all as specified and as directed.
S&F PVC (SWR) 110mm bore branch piece, single (single Y) equal or unequal complete all as specified and as directed.
S&F PVC (SWR) vent cowl 75mm bore complete all as specified and as directed.
S&F Salt-glazed stoneware gully traps 100x100mm size, square or round mouthed type 'P' complete all as specified and as directed.
Point wiring on stone / brick masonry wall complete with two 1.5 sqmm single core PVC insulated 1100 volts grade sheathed cable confirming to IS-694, 1977 with multistranded copper conductor, drawn through and including non-metalic rigid PVC conduit, conduit fittings and conduit accessories not less than 20 mm dia concealed in walls and fixed with suitable clamps on ceiling / roof trusses etc., and including provision of one 1.5 sqmm PVC insulated single core multistranded copper conductor green in colour as earth continuity conductor and connected to common earth dolly, including pressed steel terminal boxes made out of 1.6 mm thick mild steel sheet, 60mm deep, concealed in walls, duly painted with two coats of anti-corrosive over a coat of red oxide zinc chrome primer and covered with bakelite hylam sheet cover 3mm thick fixed with cadmium plated screws for housing the switches, socket outlets, fan regulators etc., complete all as specified and as directed for one light point controlled by one switch. Note:- Cost of terminal box and cutting chases for concealing pipes is deemed to be included in the item rates quoted for point wiring.
One fan point controlled by one switch with regulator.
One Exhaust fan point controlled by one switch.
One switch socket outlet 3 pin 5 Amps on same board along with other switches
One switch socket outlet 3 pin 5 Amps on independent board.
All as per item No 98 here-in-before but for point wiring with two 4.0 sqmm single core copper conductor multistranded FRLSH cable and one 4.0 sqmm PVC insulated single core multistranded cable as earth continuity conductor green in colour for one 3 pin switch socket outlet, 15 Amps, on independent board complete all as specified and as directed.
S&F Switch piano flush type, single pole,5 Amps, 240 volts complete all specified.
S&F Switch socket 3 pin 5 amps , multi pin , flush type,complete all specified.
S&F Switch socket 3 pin 15 Amps, multipurpose, flush type complete all specified.
S&F ceiling rose 65 X 50 mm , three terminals ,bakelite , surface complete all specified.
S&F electronic fan regulator, flush type phenolic laminated sheet etc; as required.
S&F MCB single pole 5-40 Amps, 230V complete all as specified.
S&F MCB SPN 40Amps, 230V complete all as specified.
S&F surface and wall mounted LED tube light fitting, 1X20 W, decorative box type with driver, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver complete with all accessories , suitable for operation on AC, single phase 220 / 230 Volts , 50 Hz supply, and including connecting up with PVC sheathed 1.0 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting complete all as specified and as directed. Make:- C&S (LTTB4F20WLED/W) and equivalent in Crompton/Havells
S&F surface and wall mounted LED tube light fitting ,2 feet, 10 watt 220 V AC decorative, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver complete with all accessories , suitable for operation on AC, single phase 220 / 230 Volts , 50 Hz supply, and including connecting up with PVC sheathed 1.0sqmm 3 core copper conductor flexible wire from ceiling rose to fitting complete all as specified and as directed. Make:- C&S (LTTB2F10WLED/W) and equivalent in Crompton/Havells
S&F decorative ECO bulkhead luminaire capacity 12W, extruded aluminium housing with polycarbonate diffuser ,environmental friendly ultra modern energy saving surface mounted, LED luminaire comprising of high brightness including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V, 50 HZ complete as specified Make:- C&S (LTB10WLED) and equivalent in Crompton/ Havells
S&F LED building security light fitting 25W made up of pressure die cast housing with toughened glass and individual high power LEDs with secondary optics, IP66 protection and impact resistance of IK07, complete pre-wired and connecting up with suitable twin core flexble copper wire including provision of necessary GI tubing medium grade 25mm bore of pipe 1.5 bent to shape with necessary clamps made out of mild steel, nuts and bolts etc., including two coats of synthetic enamel paint over a coat of red oxide primer on exposed steel surface for fixing the fitting to Bldg etc complete all as specified and as directed. Make:- C&S (LTESSI25WLED) and equivalent in Crompton/Havells
S&F MCB DB SPN 8 way, double door, powder coated, 240 volts, AC, 50Hz, IP 43 protected, with provision for MCB double pole as incomer and SP MCBs as outgoing with tinned copper bus bar, neutral link, earth link and connecting up complete all as specified and as directed. Note : Incoming and Outgoing MCB measured separately relevent items.
S&F Ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) all as specified and as directed.
S&F Exhaust fan, heavy duty, 300mm sweep, 1370 RPM, with louvers, metal body conforming to IS-2312-1967, AC single phase, 240 Volts, 50 Hz and connecting including provision of two way PVC connectors, 1 sqmm flexible three core multistranded copper conductor cable from ceiling rose or connector to fan including earthing complete all as specified.
Earthing complete with galvanised iron earth plate electrode 600mm X 600mm X 6mm thick, with and including earthing of 4mm dia GI wire protected by 15mm dia GI pipe light grade upto a length of 7.5m. The plate shall be buried directly in ground vertically to a depth not less than 2.25 metres below ground level with top edge of the earth plate at a depth not less than 1.5 metres below ground level, connected to earth lead as described here-in-before by means of bolts, nuts, washers and checknuts made out of galvanised iron or mild steel, earthing lead protected by as described here-in-before and connected to main switch board or main control board or electric pole all as shown on electrical plate No.3 of MES Sch Part-I including necessary earth work and excavation in any type of soil, plain cement concrete 1:3:6, type C1 chamber, reinforced cement concrete cover slab with locking arrangement and handle of 10mm dia MS round bars 450mm long, 1:2:4 type B1, 50mm thick with 8mm dia TMT bars at 140mm centre to centre both ways, GI pipe of bore 20mm medium grade for watering with funnel, wiremesh, salt, charcoal, lugs including testing complete all as specified and as directed.
M&L Machine pressed precast concrete interlocking paver block any shape and size mixed with grey cement and no pigment confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade over 25mm thick sand cushioning complete all as specified and as directed.
M&L Rendering 15mm thick on fair faces of Brickwork or concrete surfaces finished even and smooth without using extra cement in CM 1:3 mixed with water Proofing Compound (Note:- Water proofing compound will be paid seperately)
M&L to Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in cement concrete 1:3:6 type C-2
M&L to 150mm bore Reinforced concrete pipes, class NP2, laid and jointed complete with collars
PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in coping all as specified.
PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in benching & channel to manhole.
Extra for forming fair finished of drain channel 30cms inner girth in cement concrete using extra cement including forms, moulds, mitred/stopped ends etc.
Precast reinforced cement concrete (1:2:4) type B1 M-20 Nominal mix using 20 mm graded stone aggregate for manhole cover including placing in position and set in CM (1:4)
Cutting into existing manholes for connecting new drains making good to pipe of 150mm dia, rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching complete all as specified and directed by Eng-in-Charge
Septic Tank for 50 Users all as per HQ CECZ Drg No TD/ST/796 complete all as specified and directed by Eng-in-Charge
Soak Pit of 2.10Mtr dia and 1.80 Mtr depth with PCC Block construction with RCC Slab all as per HQ CECZ Drg No TD-TD/ST/746 complete all as specified and directed by Eng-in-Charge
Excn in post holes (or similar holes) each n.exc. 0.5 Cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers n. exc. 25 cm, watering and removing surplus soil to a distance n.exc. 50 m and making surface good in any type of soil.
M&L Mild steel half round or other steel section straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe-290 Gde E-165
Supply only 4mm dia PVC Coated Chain link MS galvanised wire fencing, of 50x50mm mesh size or type
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts etc including provission of binding wire
MS screw bolts ( machine made) with hexagonal or square head at one end screwed the other end or screwed both ends. Each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt n.exc. 10 cm.
Mild steel bars 10mm dia and over hooking ends and binding with and mild steel wire (annealed) not less than 0.9mm dia confirming to Fe-410 -W (Gde E-250)
Supply and laying of common burnt clay building bricks, sub class B of size 230x115x75mm for cable protection all as specified and as directed..
Laying of fine seived excavated soil including spreading, levelling, punning for cushioning of cable all as specified and as directed.
Supply & Laying cable XLPE insulated screened PVC bedded, gaivanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor extruded PVC Type ST2 Outer sheathed, 650/1100V as per IS 7098(part-I) of size 2 core 16 sqmm complets all as specified and as directed. Note :- i) Lugs and glands are deemed to be included in the rate quoted for laying of cable and to be used properly whereever required while connecting cables to the panel board. ii) Earth work such excavation, refilling, etc. shall be measured separately under relevant items.
Supply & laying GI pipe light grade including necessary fittings of 50 mm bore including taking down the old one complets all as specified and as directed.
Cutting existing pipe line 80mm dia and insert tee for 80x80x40mm including necessary earth works and GI fittings etc all as specified and as directed by Engr-in-Charge.
muthu constructions
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .