Modernisation and Renovation of gates and Regulator Structure of Weir Gates for preparation of installation of SCADA system

Amount

Steel casting as per IS specifications & grade complete in all respects and to entire satisfaction of engineer incharge (i) Alloy Steel Casting

Drilling/ Boring including Reaming complete in all respects & to entire satisfaction of engineer incharge. (v) above 50 mm dia

Drilling/ Boring including Reaming complete in all respects & to entire satisfaction of engineer incharge. (ii) above 10 - 20 mm dia

Machining and Finishing of any part to desired shape and size , complete in all respects and to entire satisfaction of engineer incharge

Annealling Heat Treatment of steel in all respect and to entire satisfacion of engineer incharge

Threading for pins complete in all respects and to entire satisfaction of engineer incharge above 75 mm

Removing Damaged structural steel and stacking clear from working space by gas cutting complete in all respects and to entire satisfaction of engineer incharge

Cutting and Staightening Charges complete in all respects and to entire satisfaction of engineer incharge

Providing Stainless steel Rollers of Dia 20 mm

Supply of Skin Plate of 8 mm

Providing rubber seal 80 id, 110 od

Providing Graphite Powder

Providing of hollow bulb seal or Music note and fixing in position including preparation of surface complete in all repects and to entire satisfaction of engineer-in-charge. of size 100/44

Removing damaged old rubber seal blub or flat including clamp plate of all sizes and Types.

Providing and fixing SS Nuts and bolts of all sizes and lengths required

Supply of Flat of 60 mm wide 35 mm thick

Supply of ISA 75 x 75 x 8 mm

Chequred Plate 6 mm Thick

Fillet Welding with high strength steel rods complete in all respects and to entire satisfaction of engineer incharge (iii) 10 mm wide

Fillet Welding with high strength steel rods complete in all respects and to entire satisfaction of engineer incharge (ii) 8 mm wide

Fillet Welding with high strength steel rods complete in all respects and to entire satisfaction of engineer incharge (i) 6 mm wide

Supply of MS Sheet of 3 mm

Supply of Flat 35 x 5 mm

Supply of Flat 20 x 8 mm

Providing and fixing galvanized nuts and bolts of all sizes and lengths required

Butt hinges (All items ISI Marked) Anodised aluminium mat fins 125 x 75x 4 mm

Painting Two coats with anticorrosive bitumastic paint to give an even shade with special quality paint

Applying Priming Coat with Metal primer on New Steel or Iron work including preperation of surface ( with special quality paint )

Burning Old paint with Blow Lamp

Scraping, brushing to remove paint to base metal surface

Preperation of surface for fixing new skin plate with old skin plate complete in all respects and to entire satisfaction of engineer in charge

Removing and Fixing of roller pin In position complete in all respects and to entire satisfaction of engineer in-charge. (upto 75 mm/ above 75 mm)

Hiring charges of crane 35 tonne

Commissioning and testing of Gates at site complete in all repects and to entire satisfaction of engineer-in-charge

Removing, Assembling and Fixing in position of Trolley plates for guide roller complete in all repects and to entire satisfaction of engineer-in-charge.

Painting two or more coats excluding priming coat with synthetic enamel paint in all shadeson wood work, metallic or plastered, concrete surface to give an even shade.

Supply of Grease nipple

Supply of multipurpose synthetic Grease

Supply of multigrade mobile oil

Providing high speed diesel

Providing LED Light of standard reputed company with minimum 2 year warranty (20 watt)

Advance Direction sign board 1200x1200mm rectangular as per IRC 67- 2012 with high intensity Microprismatic grade retro reflective Sheeting as per ASTM D 4956 – 09 and as per IRC 67 – 2012. fixed over 4mm thick Aluminium Composite Material (ACM) sheeting having aluminium skin thickness of 0.4 to 0.5 mm on both sided and fixing the same with suitable size aluminium alloy rivets @ 200 mm c/c to back support frame of 25x25x3mm angle iron supported on two square hollow steel section post 60x60x3.2mm conforming to IS 4923 firmly fixed to ground in foundation concrete M-25 of size 0.60x0.60x0.75m for vertical post complete as per clause 801 of MORT&H specifications. Supplier shall provide a warranty as per clause 6.9 of IRC 67-2012 for retro reflective sheeting & a certified copy of test reports from an independent test laboratory conforming to clause 6.7 of IRC 67-2012 .

Dismantling 1:2:4 cement concrete

12.50 mm thick Cement Plaster 1:3

Cement Concrete 1:2:4 with stone ballast or shingle complete in all respect.

Cement Pointing Flush 1:2

Raking out joints in lime or cement mortar and preparing the surface for repointing or replastering including cost of neat coat cement disposal of rubish to the dumping ground within 50 m lead

Overhauling of gate mechanism of all types including dismantling , greasing, oiling and re-installation of mechanism complete in all aspects

Removing ,Providing insatallation& fixing in position EM Brake at site complete in all respects and to entire satisfaction of engineer-in-charge

Plumber block as per list and make SKF , NBC

Providing SS Round of 80 mm

PVC INSULATED FR COPPER CONDUCTOR CABLES: Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- Overall size 1sq.mm (Un-sheathed)

PVC INSULATED FR COPPER CONDUCTOR CABLES: Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- Overall size 1.5 sq.mm (Un-sheathed)

PVC INSULATED FR COPPER CONDUCTOR CABLES: Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- Overall size 2.5 sq.mm (Un-sheathed)

PVC INSULATED FR COPPER CONDUCTOR CABLES: Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- Overall size 4 sq.mm (Un-sheathed)

PVC INSULATED FR COPPER CONDUCTOR CABLES: Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- Overall size 6sq.mm (Un-sheathed)

PVC INSULATED FR COPPER CONDUCTOR CABLES: Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- Overall size 10sq.mm (Un-sheathed)

Supply and erection of PVC insulated PVC sheathed FR (2Core) round flexible wire with copper conductor cable (ISI marked) confirm to IS:694/1990 left bare in pipe or on surface with cleats of suitable size complete in all respect as desired by the Engineer-in-charge:- Overall size 1.5sq.mm (48/0.20mm), 2Core

Supply and erection of PVC insulated PVC sheathed FR (2Core) round flexible wire with copper conductor cable (ISI marked) confirm to IS:694/1990 left bare in pipe or on surface with cleats of suitable size complete in all respect as desired by the Engineer-in-charge:- Overall size 2.5sq.mm (50/0.25mm), 2Core

Supply and erection of PVC insulated PVC sheathed (3 core) round flexible wire with copper conductor (FR) cable (ISI marked) confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- Overall size 4.0sq.mm (84/0.3mm), 3Core

XLPE INSULATED ARMOURED CABLES (LOOSE): Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS:7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:- Overall size 10sq.mm (2Core) Armoured (Loose)

XLPE INSULATED ARMOURED CABLES (LOOSE): Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS:7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:- Overall size 25sq.mm (4Core) Armoured (Loose)

XLPE INSULATED ARMOURED CABLES (LOOSE): Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS:7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:- Overall size 35sq.mm (4Core) Armoured (Loose)

G.I. EARTHING WIRE/ ROPE (AS ADDITIONAL LENGTH): Bonding to existing earth with 8 S.W.G. (4mm dia) G.I. wire fixed with stapples on wall.

SUPPLY AND ERECTION OF WIRING ACCESSORIES: Supply and erection of switches, sockets and other accessories (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including fixing & connections and petty material etc:- Modular Motor Starter 25Amp. (Two Module)

BAKELITE SHEET: Supply and erection of brown bakelite sheet white glazed translucent backside painted 3mm thick (thickness not less than 3mm) on the existing metal box including cutting, fixing and connection of existing switches and sockets and other petty material etc.

MINIATURE CIRCUIT BREAKERS:Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:- MCB Single Pole 0.5-4amp. (10kA, CurveC)

MINIATURE CIRCUIT BREAKERS:Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:- MCB Double Pole 50, 63amp. (10kA, Curve- C)

MINIATURE CIRCUIT BREAKERS:Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:- MCB Triple Pole 6-32amp. (10kA, Curve-C)

RCBO's: Supply and erection of RCBO (Residual Current Breaker Overload) for Earth leakage, overload and short circuit protection suitable for 240/415 volts 50 cycles AC supply with breaking capacity of 10kA as per IEC 61009 in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:- RCBO Four Pole 16/25amp., Sensitivity 30mA

Supply and erection of Porcelain Fuse Unit with Extension Strip on existing surface with G.I. bolts & nuts/ rag bolts and nuts etc., including connections with suitable size of thimbles and bonding to the existing earth as Per PWD General Specifications :- Porcelain Fuse Unit 32Amp., 415volts

Supply and erection of Porcelain Fuse Unit with Extension Strip on existing surface with G.I. bolts & nuts/ rag bolts and nuts etc., including connections with suitable size of thimbles and bonding to the existing earth as Per PWD General Specifications :- Porcelain Fuse Unit 100Amp., 415volts with Extension Strip

MCCB's (FOR PANELS & SHEET ENCLOSURE): Supply and erection of Moulded Case Circuit Breaker (Panel mounting Cubical type) in the existing Cubical Panel (confirm to IEC:60947-2) having Ics=100% Icu, 100% neutral with spreader terminal links, Extended rotary handle and relevant PWD general specifications complete with G.I. Bolts, Nuts & Connection on both sides of MCCB with suitable size of thimbles etc:- MCCB Four Pole 125amp., 415volts, ≥25kA Fixed Magnetic and Adjustable Thermal Setting

MS CHANNELS/ FLATS: Supply and Erection of MS angle iron (Channel)/ MS Flats of suitable size with cutting, bending and necessary holes as desired by Engineer-in-charge at site:- MS flat iron size 40mm x 5mm thick

Supply and erection of heavy duty aluminium thimbles/lugs for cable end termination duly crimped including making necessary connections completely:- Aluminium thimble cable Core size 4-6 sq.mm

Supply and erection of heavy duty aluminium thimbles/lugs for cable end termination duly crimped including making necessary connections completely:- Aluminium thimble cable Core size 25 - 35sq.mm

Supply and erection of heavy duty Copper thimbles/lugs for cable end termination duly crimped including making necessary connections etc. completely:- Copper thimble cable Core size 25 - 35sq.mm

Nuts & Bolts of all sizes and length required

DISMANTLING WIRING POINTS & FITTINGS: Wall socket, power plug point

Providing& installation to Three phase contactor with Automatic switch at site complete in all respects and to entire satisfaction of Engineer in charge.

Designing, Supply, Erection, Testing & commissioning of indoor Type LT cubical panel enclosure (dust, vermin and interchangeable modules with facilites for extensions or reduction as per the space or requirments). The Panel shall be suitable for operation at 415+6% Volts, 50HZ, 3 phase 4 wire & earth system. The assembly manufacturer should be ISO approved and CPRI tested for short circuit of (minimum 50kA) as well as IP degree of protection (IP 54/55). Fabrication:- Panel shall be made from 14/16 SWG CRCA sheet, conforming to IS 8623/1977-82. The sheet metal used for the fabrication of control panel will be 2mm for load bearing member’s door and fittings plates etc. the partitions and other non load bearing members will be fabricated out of 1.6mm sheet, the sheet will be of mild steel CRCA type. The base channel will be made out of 75 x 40 x 5mm rolled channel (iii) LT Panel enclosure having space for 1No. Incomer MCCB 250Amp. and 6Nos. outgoing MCCB's 40amp. to 125amp. according to the requirement at site (Approx. size 1300 x 1650 x 400mm)

Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:- (a) Heavy Gauge PVC Conduit Pipe 20mm dia. (On Surface)

Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:- (c) Heavy Gauge PVC Conduit Pipe 32mm dia.(On Surface)

Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:- (d) Heavy Gauge PVC Conduit Pipe 40mm dia. (On Surface) dia. (On Surface)

Painting of Galvanized iron pipe pole including bracket with two coats of aluminium paint (With brush):- (b) Overall Length 6.1 Metre

Painting of G.I./ Conduit pipes with two coats of approved paint (With brush) including cleaning the surface etc.:- (a) Painting of G.I. Pipe 15mm and Conduit Pipe 20mm dia.

Painting of G.I./ Conduit pipes with two coats of approved paint (With brush) including cleaning the surface etc.:- (c) Painting of G.I. Pipe 25mm and Conduit Pipe 32mm dia.

Painting of G.I./ Conduit pipes with two coats of approved paint (With brush) including cleaning the surface etc.:- (d) Painting of G.I. Pipe 32mm and Conduit Pipe 40mm dia.

Supply and erection of PVC flexible pipe complete without compression glands, locking arrangement, check-nuts as required:- (a) PVC Flexible Pipe 20mm dia.

Supply and erection of MS perforated cable tray (MS Sheet thickness 2mm) with DA gray paint on the existing surface with the help of MS angle iron support (to be painted with approved paint) of size 50mm x 50mm x 6mm thick to be fixed with fastners/ nut & bolts etc., complete in all respect as desired by the Engineer-in-charge and as per PWD General Specifications:- (i) Cable Tray Size 150mm x 50mm x 50mm (2mm thick)

Supply and erection of MS perforated cable tray (MS Sheet thickness 2mm) with DA gray paint on the existing surface with the help of MS angle iron support (to be painted with approved paint) of size 50mm x 50mm x 6mm thick to be fixed with fastners/ nut & bolts etc., complete in all respect as desired by the Engineer-in-charge and as per PWD General Specifications:- (ii) Cable Tray Size 300mm x 50mm x 50mm (2mm thick)

CIMCON Software (I) Pvt. Ltd.

MANMOHAN SINGH CONTRACTOR

M/s Khara Contractors