Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹81.6 LAccepted-AOC | L1 | Accepted-AOC Lowest bidder accepted | |
| 2 | Rejected-Technical | - | Rejected-Technical Not Accepted |
Tender Value
₹87 L
EMD Value
₹87,000
Closing Date
24 Feb 2024, 2:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
The Forest Engineer, Harur
Office of The Forest Engineer, Forest Engineering Division Harur, Katcharimedu, Harur, Dharmapuri-636903
Improvement from Thavalapatti to Moolapudhur (Existing Earthen Road) Forest road (Attur Forest Division) Villupuram Forest Engineering Range, Harur Forest Engineering Division during 2023 24 (KM 0/000 to 1/800) in Salem District
2024_TNFD_423108_5
TN 17 / 2024 / D
Open Tender
Civil Works - Roads
Item Rate
60 days
Attur
As per Technical Document
8 documents required · 8 mandatory
₹0
₹87,000
19 Mar 2024
12 Feb 2024
26 Feb 2024
12 Feb 2024
24 Feb 2024
16 Feb 2024
Amount
Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000m including removal and disposal of top organic soild not exceeding 150mm in thickness as per Technical Specification Clause 201.
Earth work excavation in all types of soils for the construction of roadway embankment to the required line, grade, slope and level as per drawings including stacking reusable materials and disposal of unwanted excavated material with a lead of 1 Km and all lift as per Technical Specification clause 301 of MORT&H specifications complete and as directed by Engineer FOR CUTTING
Earth work excavation in all types of soils for the construction of roadway embankment to the required line, grade, slope and level as per drawings including stacking reusable materials and disposal of unwanted excavated material with a lead of 1 Kms. and all lift as per Technical Specification clause 301 of MORT&H specifications complete and as directed by Engineer FOR FILLING UTILIZING THE CUT EARTH (Compaction Only)
Providing Gravel for Sub-Base 150mm thick including cost and conveyance of gravel from approved source to worksite and stacking on road side to departmental metric gauge for pre measurements as directed including labour for spreading watering and compacting by power roller rolling etc., complete complying with standard specifications.
Providing & laying Water Bound Macadam using Grade-II consolidated thickness of 75mm using 1.00 cum. of 90 mm to 22.4mm Grade I.R.C. metal to a size H.B.G. metal 0.05 Cum. of 90mm, 0.45 cum of 63mm, 0.425 cum. of 53mm, 0.05 0cum. of 45mm and 0.025 cum. of22.4mm adopted for estimate purpose and 0.24 cum of clean gritty gravel for blindage 10 Sqm. including cost and conveyance of all the materials from approved quarries noted in the lead chart to the road side & stacking them to departmental gauge for pre measurements & labour charges for laying & spreading the metal and gravel to the required grades and lines hand packing to camber watering all leads forgood water, forming edge berms etc.,and consolidation by 8-10 Tonne capacity power roller rolling watering and keeping the surface moist for 5 days including the hire charges and running charges for powerroller, water sprinkler and all other Tools & Plants employed and other incidental charges such as barricading cautionary signs, danger lights etc., complete (The payment shall be made on compacted volume based on levels) as per MoRT&H 111, 112, 404 & 900 For Bottom Layer
Providing & laying Water Bound Macadam using Grade-III consolidated thickness of 75mm using 1.00 cum. of 63 mm to 11.2mm Grade I.R.C.metal to a size H.B.G. metal 0.025 Cum. of 63mm, 0.20 cum. of 53mm, 0.725 cum. of 45mm, 0.025 cum of 22.4mm and 0.020 cum. of 11.2mm adopted for estimate purpose and 0.24cum of clean gritty gravel for blindage 10 Sqm. including cost and conveyance of all the materials from approved quarries noted in the lead chart to the road side & stacking them to departmental gauge for pre measurements,& labour charges for laying and spreading the metal and gravel to the required grades & lines hand packing to camber watering all leads for good water, forming edge berms etc.,and consolidation by 8-10 Tonne capacity power roller rolling watering and keeping the surface moist for 5 days including the hire charges and running charges for powerroller, water sprinkler and all other Tools & Plants employed and other incidental charges such as barricading cautionary signs, danger lights etc., complete (The payment shall be made on compacted volume based on levels) as per MORT&H 111, 112, 404 & 900 For Top Layer
Prime coat: Providing and applying primer coat with bitumen emulsion (SS-I type) on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means as per clause 111, 112, 502 & 900 of MORTH Vth Revision - over WMM/ WBM
Tack coat - Providing and applying tack coat with bitumen emulsion (RS-I type) using emulsion pressure distributor at the rate of 0.25 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom as per clause 111, 112, 503, 900 of MORTH Vth Revision - over granular surfaces treated with primer
Providing & laying Premix Carpet 20mm consolidated thickness using IRC size machine broken HBG metal 0.18cum of 13.2mm & 0.09 cu.m of 11.2mm with 14.60Kg. of bitumen for premixing for 10Sq.m. of Premix Carpet HBG metal and 0.09 cu.m of 6.7 with 9.8kg of bitumen for seal coat type'A" complete to departmental gauge for premeasurement including cost of bitumen and stacking them to departmental gauge for premeasurement including cost of bitumen and bitumen using mini hot mix plant conveying the mix to site including for mini hot mix plant power roller and all other tools and plants employed and incidental charges such as barricading providing danger lights etc., complete as per MORT&H 111, 112, 501, 509, 513 & 900 Premix Carpet.
Using of available cut earth including removal satisfactory disposal of all materials necessary for construction of roadway in accordance with the specification and the lines and grades and cross sections showing in the drawings or as directed by the Engineer for making up berms
Providing RCC M15 grade precast KM stone of standard design as per IRC 8-1980 and fixing in position incluidng painting and printingetc., complete (as per MORT&H specification No 804)
Providing RCC M15 grade precast HM stone of standard design as per IRC 8-1980 and fixing in position incluidng painting and printingetc., complete (as per MORT&H specification No 804)
Providing and laying of hot applied Thermoplastic compound 2.5mm thick including reflectorising glass beads @ 250gms per Sqm area, thickness of 2.5mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes etc., complete as per MORT&H specification No.803
Providing and fixing reflective road studs of category 'A' Raised pavement markers made out of polycarbonate/ methyl methecrylate/ ABS moulded body confirming to ASTM D 788 and reflective panels with microprismatic lens capable of providing total internal reflection of the light entering the lens face with retro-reflectance and chromaticity values conforming to ASTM D4280. The Reflective raised pavement markers shall also confirm to the MORTH circular No RW/NH.33023/10/97 DO.III dt 11.06.97. The height, width and length shall not be less than 15mm, 90mm and 100mm and with minimum reflective area of 13 sq.cm. on each side and the slope to the base shall be 35+/-5 decree. Each reflector shall have a CIL not less than values specified in Table 2 of said MORTH circular. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19+/-2mm and height not leass than 30+/-2mm) from the body is to be minimum value of 500 Kgf. Fixing will be by drilling holed on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer. The marker shall support a load of 13635 Kg tested in accordance with ASTM D4280 and confirming to IRC 35-2015 guidelines and MORT&H specification 804 etc., complete
Providing and fixing of Retro - Reflectorised Cautionary, mandatory and Informatory signs (without definition board) made out of High Intensity Prismatic Grade Sheeting confirming to Type-IV standards of IRC 67:2010 and ASTM D 4956-09, specification and fixed over 2mm thick Aluminium sheet fixed over a back supporting frame of 25mmx25mmx3mm Mild steel angle and supported on a mild steel angle post 75x75x6mm with a clear height of not less than 2.10m from the ground level to the bottom of the sign board and 0.60m below ground level. The sign post should be painted as per IRC 67:2012 and firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45cmx45cmx 60cm size including cost and conveyance of all materials, equipment, Machinery and labour with all leads and lifts, loading charges necessary for satisfactory completion of the work as directed by the engineer in charge. High intensity Retro-Reflectro sheet shall consist of minimum coefficient of Retro-reflection as per Table 6.6 of IRC 67-2012. The retro-reflective sheeting shall be covered under 7 year warranty issued for field performance and a certified copy of three years outdoor exposure report shall be obtained as per IRC 67:2012 (as per MORT&H Spec. No.801)
Providing and erecting direction and place identfication retro-reflectorised sign as per IRC:67 made of high intensity grade sheet vide clause 801.3 fixed over aluminum sheeting, 200 mm thick with area not exceeding 0.90 sqm supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with means of M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801
Construction of Slab Culvert @ Ch.0
Earth work excavation in all classes of soil except hard rock requiring blasting and depositing on bank as per SS20B with all leads and lifts and all other incidental charges such as baling out water shoring shrutting, walling & forming protective bunds wherever necessary etc complete as per relevant standard specification for FOUNDATION OF ABUTMENTS AND WINGS
Vibrated Cement Concrete of Grade M-15, Nominal Mix 1:2:4 using 40mm ISS HBG metal including cost and conveyance of all materials to site and cement at site including cost of form work, soft water,labour charges for mixing, transporting, laying and curing concrete, working at depths tools and plants and incidental charges such as maintaining of protective bunds, cofferdams, shoring, strutting etc; complete as per relevant standard specification for FOOTINGS OF ABUTMENTS AND WINGS below Sill Level
Vibrated Cement Concrete of Grade M-15, Nominal Mix 1:2:4 using 40mm ISS HBG metal including cost and conveyance of all materials to site and cement at site including cost of form work, soft water,labour charges for mixing, transporting, laying and curing concrete, working at depths tools and plants and incidental charges such as maintaining of protective bunds, cofferdams, shoring, strutting etc; complete as per relevant standard specification for FOOTINGS OF ABUTMENTS AND WINGS above Sill Level
Vibrated Reinforced Cement Concrete M-25 Grade Design Mix using ISS size hard granite broken graded metal including cost and conveyance of all materials to site and cement at site but excluding cost and fabrication of steel, including labour charges for mixing, transporting, laying, curing concrete, working at heights, hire charges for tools and plants, including all other incidental chargeas, etc., complete for BED BLOCK CUM DIRT WALL OVER ABUTMENTS.
Providing and fixing seepage pipes of 100mm PVC pipes of required lengths for abutments and wings including cost and conveyance of all materials to worksite, cost and labour for 900 mm dia semi-spherical backfill arrangements with 100mm size broken granite chips at the periphery and labour charges for fixing,etc,complete to drain the backfill.
Providing and fixing KRAFT PAPER for full width of seating of deck slab and including cost and conveyance to worksite, labour for fixing the same in correct position and all other incidental charges etc., complete
Providing and fixing Bituminous Felt Expansion Joint in between Deck slab over abutments and piers as shown in the drawing including cost and conveyance of expansion joints including shalimar pad and joint sealent etc, complete
Vibrated Reinforced Cement Concrete M-25 Grade Design Mix using ISS size hard granite broken graded metal including cost and conveyance of all materials to site and cement at site but excluding cost and fabrication of steel, including labour charges for mixing, transporting, laying, curing concrete, working at heights, hire charges for tools and plants, including all other incidental chargeas, etc., complete for DECK SLAB.
Providing and fixing Bituminous Felt Expansion Joint in between Deck slab over abutments and piers as shown in the drawing including cost and conveyance of expansion joints including shalimar pad and joint sealent etc, complete
Supply and Fabrication of Fe-500D steel required for all RCC items of works involved in the schedule cost of steel at site fabrication, labour charges for cleaning the rods straightening, cutting, bending, tying grills, including overlaping to the required length wherever necessary and placing the reinforcement in position as specified in the drawings, including cost of binding wire, provision of spacer bars, cover blocks and all other incidental charges etc, complete, Fe-500D grade-1 MT. For bars upto 16mm dia.
Providing Hard Bed @ Ch.745-760 & 1170-1190
Earth work excavation and depositing on bank with initial lead of 10m and initial lift of 2m in hard stiff clay, stiff black cotton hard red earth shales, murram gravel stoney earth and earth mixed with small size boulders as per SS20B for FOUNDATION OF BODY WALLS
Plain Cement Concrete 1:4:8 mix using 40mm ISS HBG metal including cost and conveyance of all materials to site and cement at site including cost of form work, soft water,labour charges for mixing, transporting, laying and curing concrete, working at depths tools and plants and incidental charges such as maintaining of protective bunds, cofferdams, shoring, strutting etc; complete as per relevant standard specification for BASE COURSE OF HARDBED
Plain Cement Concrete 1:3:6 mix using 20 & 40mm ISS HBG metal including cost and conveyance of all materials to site and cement at site including cost of form work, soft water,labour charges for mixing, transporting, laying and curing concrete, working at depths tools and plants and incidental charges such as maintaining of protective bunds, cofferdams, shoring, strutting etc; complete as per relevant standard specification BODY WALL & CROSS WALL OF HARDBED
Plain Cement Concrete 1:2:4 mix using 20mm ISS HBG metal including cost and conveyance of all materials to site and cement at site including cost of form work, soft water,labour charges for mixing, transporting, laying and curing concrete, working at depths tools and plants and incidental charges such as maintaining of protective bunds, cofferdams, shoring, strutting etc; complete as per relevant standard specification for WEARING COAT FOR HARDBED
Providing Metal Crash Barrier @ Km.0/000-1/800
Providing and erecting Single Sided Double Guard Metal Beam Crash Barrier System 1.70m high, comprising of 3mm thick wall 'W' beams, posts and spacer channels shall be made by cold roll forming using HR conform to IS 5986 Fe 410/360 and dip galvanized having Zinc mass of 550 gms/sqm, minimum 950mm above road/ ground level, fixed on ISMC series channel vertical post 150x75x75mm spaced 2m centre to centre 312mmx83mm flange width x 3mm thick 4318mm long post directly embedded in the concrete (M15) pit size 350x350x800mm for a length of 750mm below ground. All fixing bolts and nuts hot dip galvanized conforming to IS:1367 clause 4.60 all completed as per Technical Specifications and as directed by the Engineer-in-charge
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .