SPECIAL REPAIRS FROM ASHOKA TO DRILL GROUND BR NATURE WORK UNDER GE I GOS

Amount

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M & L for brick work with sub class "B" brick (old size) straight or curved on plan to any radius in half brick thick walls built in CM 1:4 to any radius complete all as specified and directed.

M & L for old size brick work with fly ash bricks straight or curved on plan exc 6m mean radius in CM 1:6 completed all as specified and directed.

Taking down cement plaster any description on brick or stone walls or RCC roofs/ceiling etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M&L for rendering 15 mm thick on fair face of brick works in CM 1:6 finished even and smooth with out using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick in CM (1:4) on fair faces of brick or concrete surface of wall and finished even and smooth with out using extra cement and mixed with water proofing compound @ 3% by weight of cement complete all as specified and directed.

M&L rendering 5 mm thick in cement mortar 1:3 on concrete surfaces of ceiling and finishing the surfaces even and smooth complete.

M&L for Preparation of Newly Plastered surfaces of Wall and applying Two coats of White Wash all as specified and directed.

M&L for preparation of new plastered surfaces of walls or concrete and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

M&L for complete removal of existing treatment of old decorated surfaces of walls and apply two coats of white wash after preparation of surfaces complete all as specified and directed

M & L for applying two coats of Oil bound distemper on old walls or concrete over a coat of primer on prepared surfaces including, rubbing with sand paper after Complete removal of existing treatment complete all as specified.

M & L preparation & applying two coats of Cement based paint on newly plastered wall surfaces/old plasterd surfaces including complete removal of existing wall finish of any type with wire brush, brooming,& dusting absolutely free from any kind of foreign materials complete all as specified and directed.

M&L for complete removal of existing treatment of old surfaces of ceiling and applying two coats of white wash after preparation of old surfaces complete all as specified and directed.

Taking down chowkhat or frames n exc 1.50 Sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed

Taking down chowkhat or frames exc 1.50 Sqm and n exc 4 Sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed

Taking down and Refixing of shutter of any description exc. 1 sqm but not exc 2 Sqm each leaf in same opening after easing and adjusting building hard ware etc complete all as specified and directed

S&F in repair 2nd class hardwood Beads, straight (any size) for glazed or gauzed joinery, renewed, including mitres etc., and removing old beads to Store

S&F in repair 300 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S & F for solid PVC door frame of size 50x47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplied and fixing in opening as specified and shown on drawing made on section 8 of SSR 2010 Part-II complete all as specified and directed

S & F factory made solid panel PVC door shutter 30 mm thick style consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC “C” channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, S & F in the frame as per specifications and shown on drawing in section 8 of SSR-2010 Part-II complete all as specified and directed

Taking down old wooden/wood based particle board & S&F 12 MM thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

S&F 6 mm thick teak wood liping 12 mm width prelaminated particle board fixed with screws complete all as specified and directed.

S & F in repair Continuous (piano) hinges, 40 mm width of mild steel, bright finish or electrogalvanisd complete all as specified and directed.

S&F in repaur Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed.

S&F in repair 100 mm long butt hinges extruded aluminium alloy with galvanised mild steel hinge pin anodised type B-21 complete all as specified and directed.

S&F in repair 150 mm size extruded aluminium alloy handles fabricated type anodised of complete all as specified and directed.

S&F in repair 150 mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F in repair 250 mm long aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

M&L for preparation of old painted surfaces of wood and wood based surfaces of any description, over 10 cm in width or girth and apply one coat of synthetic enamel paint complete all as specified and directed.

S&F Powder coated Aluminium anodised glazed side hung door shutters with anodised aluminium frame of section of 100x44x2mm and bottom rail of 44.5x99x1.8mm including 5.5mm thick tinted sheet glass ordinary quality with all necessary suitable push & pull plate/handle , screw, jointing cleats, rubber packing aluminium snap beading and 1 No 200mm long Aluminium tower bolt, 100mm long 3 No Aluminium butt hinges B-21 Type and one No mortice brass lock 100 size 4 leaver (Vertical Type) with 01 No door closer Aluminium (Diie cast) body hydraullically regulated designation ;No 02 universal type, for each shutters complete all as specified; and ;directed

S&F Powder coated three track Aluminium sliding window with frame not less than 1.8 mm thick including 4 mm thick tinted glass, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket, aluminium snap beading & necessary rubber packing, locking, roller & opening arrangement,Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm, all fitting and fixtures complete all as specified and directed by Engr-In-Charge

S&F Powder coated Aluminium Ventilator with frame not less than 1.8 mm thick & including 4 mm thick sheet glass including beading & necessary rubber packing, locking & opening arrangement if required, all fitting and fixture complete all as specified and directed.

S&F 7mm thick aluminium grills of god quality surrounded by aluminium 'C' channel with mesh size 75 X 75mm complete all as specified and directed.

S&F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4 mm fixed with stainless steel wire staples or with necessary beads complete all as specified and directed.

Demolition of cement concrete (un-reinforced/reinforced) Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work compelte all as specified and directed.

M&L for 40 mm thick cement concrete 1:2:4 type B-0 (20 mm graded stone aggregate) as in RCC roof surface to horizontal or vertical surfaces finished cement concrete surface even and smooth using extra cement including necessary form work (Water proofing compound will be measured separately)

Taking down existing water proofing treatment/membrane of any type and Cleaning the surface of roof, palstered surfaces etc by roughening, picking, sweeping clean and washing down with water to remove all loose dirt etc and preparing the surface to receive plaster and brushing neat cement slurry @ 3.00 Kg of cement per Sqm complete all as directed by Engr-in-Chrg

M&L for rendering 15 mm thick surface as in roof with integral water proofing compound @ 3% by the weight of cement in CM 1:4 complete all as specified & directed. (Integral WPC will be measured and paid separately).

M&L for water proofing treatment to roof surface complete all as specified & directed by Engr-in-Charge laid with following course of descrition below :- :- (a) Apply evenly bituminous based primer confirming to IS: 3384-1965 @ 0.30 kg/sqm. (b) APP modified bituminous membrane 3mm thick with non woven polyester core of weight not less than 3.2 to 3.5 Kg/sqm laid and bonded to the sub strata by heat process, over laps of 100mm shall be sealed/fused by flame torch application as per manufacturer instructions. (c) Applying bituminous based aluminium paint @ 0.20 Kgs/Sqm in two coats over APP membrane

Supply only Integral Water proofing compound all as specified.

Dismantling of AC/GI plain/Corrugated / semi corrugated roof sheets any type and any size complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and as directed by Engineer-in-Charge.

S&F mild steel work in tubular poles & trusses (framed) including purlins,rafters and special shaped washer etc complete using ERW or induction butt welded tubes confirming to IS-1161-1979 grade St-240 complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of new or previously untreated surfaces of steel of any description, over 10cm in width or girth and apply two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Demolition of cement concrete unreinforced in ground floor and paving n exc 15cm thick (below or above ground level) complete all as specified and directed.

Demolition of cement concrete unreinforced iabove ground floor but exc 15cm thick complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in sub base flooring 25 mm thick surface finished even and rough to receive the topping layer complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in sub base flooring 50 mm thick surface finished even and rough to receive the topping layer complete all as specified and directed.

M&L for PCC 1:3:6 type C1 using 20mm graded stone aggregate, 50 mm thick in plinth protection laid in panels and finished even and smooth without using extra cement including necessary form work complete all as specified and directed..

Dismantling floor, hearth or wall tiling including cement mortar bedding etc (but not backing) and removing rubbish off the premises complete all as specified and directed.

M&L for Machine cut kota stone slab flooring mirror finished 18-20 mm thick (each slab not less than 0.25 Sqm) over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab with 20 mm thick screed bed or bedding layer in cement mortar 1:4, including rubbing and polishing complete all as specified and directed.

M&L for Machine cut kota stone in riser of steps, skirting, dado and pillar mirror finished 18-20 mm thick over cement base rendering laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab with 15 mm thick screed bed or bedding layer in cement mortar 1:4, including rubbing and polishing complete all as specified and directed.

M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 20 mm thick screed bed in cement mortor 1:6 complete all as specified and directed.

M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm in vertical surfaces such as skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 10 mm thick screed bed in cement mortor 1:4 complete all as specified and directed.

M&L for glazed ceramic coloured tiles 300 x 450 x 7 mm thick on vertical surface such as dado /skirting / risers to steps etc jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles over and including rendering 10 mm thick in cement mortor 1:4 complete all as specified and directed. Note- (i) The size of tiles (except thickness) may be varied during execution without any price adjustment.

M&L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations

Taking up & down GI steel tubing & connections including cleaning for refixing or removal to store for 15mm bore of pipe complete all as specified and directed.

Taking up & down GI steel tubing & connections including cleaning for refixing or removal to store 20mm bore of pipe complete all as specified and directed.

Taking up & down GI steel tubing & connections including cleaning for refixing or removal to store 25mm bore of pipe complete all as specified and directed.

Supplying and fixing of 15mm bore dia, CPVC pipes SDR 11 & plain CPVC SDR 11 fittings, and brass fittings wherever necessary as in connection with bb tap,pillar tap, angle cock etc. fixed on walls/ceiling or laid in floors, etc, complete all as specified and directed.

Supplying and fixing of 20mm bore dia, CPVC pipes SDR 11 & plain CPVC SDR 11 fittings, and brass fittings wherever necessary as in connection with bb tap,pillar tap, angle cock etc fixed on walls/ceiling or laid in floors, etc, complete all as specified and directed.

Supplying and fixing of 25mm bore dia, CPVC pipes SDR 11 & plain CPVC SDR 11 fittings,and brass fittings wherever necessary as in connection with bb tap,pillar tap, angle cock etc fixed on walls/ceiling or laid in floors, etc, complete all as specified and directed.

Cutting chases in brick walls, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete.

S&F in repair bib tap cast copper alloy chromium plated with crutch or butterfly handle fixed to 15 mm dia GI tube/CPVC pipe all as specified and directed.

S&F in repair 15 mm fancy type pillar taps chromium plated cast copper alloy with capstan heads screwed down high pressure with or without lettered ‘Hot’ or ‘cold’ with long screwed shanks and fly nuts fixed and complete

S&F in repair 15 mm fancy type stop valve/angle valve cast copper alloy chromium plated screwed high pressure with crutch or butter fly handle screwed both ends for iron or union and fixed to 15 mm GI tube complete all as specified and directed by Engineer-in-Charge.

S&F in repair 25mm dia ball Brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipes or brass ferrule and fixed as in PVC Service tanks all as directed.

S & F in repairs 25mm bore gun metal gate valves with iron wheel head screwed both ends for iron pipe and fixed.

S&F in repairs PVC connection 15mm size with PTMT nuts, of 450mm length complete all as specified and directed.

S & F in repairs, vitreous china wash basin, white, flat back, size 550x400mm with brackets, inc.cutting for fixing & pinning in ends of brackets including PVC waste pipe complete all as directed by Engr-in-Chrg

S& F in repairs Counter Wash hand basin fixed on Granite/Marble or other appropriate top coloured including chromium plated waste coupling, PVC connection and waste pipe complete all as specified.

S&F in repairs viterious china squatting pan orissa pattern size 580x440mm white integal foot rest including concrete bedding & including P or S trap 100mm complete all as directed by Engr-in-Chrg

S&F in repair PVC low level flushing cistern (white) 10 Ltrs capacity with inlet, ball valve, float and handle internal fitting, push button operated type with and including brackets etc complete.

S&F Grating doom 125 mm dia with waste hole of PTMT Minimum weight 40 gms complete all as specified and directed.

S&F in repair CP brass towel rail `D’ type 60Cm long fixed to wall all as spd and directed by Engr-in-Charge

M&L 32mm dia bore Waste fittings, brass, chromium plated for glazed ware sinks, waste pipe for basins, etc.with long screwed shanks and fly-nuts, flange end bedded in red lead cement complete all as specified and directed.

S&F in repair 75 mm PVC (SWR) floor trap with grating including jointing with solvent cement. Complete all as specified and directed

Demolition and breaking up drain pipe (salt glazed ware, AC or reinforced concrete,PVC ) set in cement mortor for any size & type complete all as specified and directed.

M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls or laid in floors of 75 mm bore of pipe etc complete all as specified and directed.

M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints,fixed to walls or laid in floors of 110 mm bore of pipe etc complete all as specified and directed.

S&F PVC (SWR) bends any radius of 75 mm bore with out access door complete all as specified and directed.

S&F PVC (SWR) bends any radius of 110 mm bore with out access door complete all as specified and directed.

S&F PVC (SWR) bends any radius of 75 mm bore with access door complete all as specified and directed.

S&F PVC (SWR) bends any radius of 110 mm bore with access door complete all as specified and directed.

S&F PVC (SWR) vent cowl 75 mm bore complete all as specified and directed.

S&F PVC (SWR) vent cowl 100 mm bore complete all as specified and directed.

S&F stack clamp made out of 50x5 mm flat iron, 16mm dia round iron stays including bolts & nuts and securing ends of stays to wall or roof for any dia of pipe complete.

S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specifeid

Dismantling PVC water tanks not exc 250 ltr capacity and removing to store complete all as specified and directed.

Dismantling PVC water tanks exc 500 ltr but not exc 1000 ltr capacity and removing to store complete all as specified and directed.

Dismantling PVC water tanks exc 1000 ltr but not exc 2000 ltr capacity and removing to store complete all as specified and directed.

S&F 250 ltr capacity Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified complete

S&F 1000 ltr capacity Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified complete

S&F 2000 ltr capacity Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified complete

S&F for 25mm dia Stainless Steel Curtain Rod with brackets and rings complete all as specified and directed

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for and removal of rubbish from site complete all as specified and directed

M&L for RCC 1:2:4 (Nominal mix) type B-1 as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for rough finished surfaces of concrete complete all as specified

S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light,fan,bell, socket or power) complete,including fixtures and fittings such as switches, ceiling roses, holders,regulators, sockets, tube light fittings i.e removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made for conditions separately ) and including making good the disturbed surfaces to match with existing surface and colour shade with putty for smooth finishing without andulations complete all as specified and directed

Material and labour for point wiring complete with 1.5 sqmm PVC insulated, FRLSH type, ISI marked,conforming to IS-694/1990 unsheathed, multistranded, single core, copper conductor cable 1100 volts grade colour code cables drawn through and including PVC Conduit 20 mm dia medium grade(MMS) and including cutting, chasing work at any height and all accessories concealed in walls / roofs / floors / ceiling etc. flush mounting MS box with top,bottom,side/back wall knockout for conduit entry from any direction made out of 1.60mm thick suitable for fixing of and including white/Silver/Dark bronze colour modular blanking plate as per number of switch modules flush mounted for fixing of modular switches,sockets,fan regulators, blank plate etc and including above mentioned colour modular plate cover of required modules and including 1.5 Sqmm PVC insulated multistranded FRLSH type unsheathed(Green colour),single core cable with copper conductor cable as earth continuity conductor and connecting to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour shade with putty for smooth finishing complete all as specified and directed for the One light point controlled by one switch. (Note:- All necessary accessories such as modular box,top cover plate, blank plate,MS box,screws,washers and all modular electrical fixtures are used same make/brand only and including cutting & chasing work at any height it shall be deemed in to included in quoted rate only.)

All as per item no. 30 but One fan point controlled by one switch and one regulator.

All as per item no. 30 but One exhaust fan point controlled by one switch .

All as per item no. 30 but One 5 pin 6 amps socket point controlled by one 6 amps switch on independent board .

All as per item no. 30 but One 5 pin 6 amps socket point controlled by one 6 amps switch on same board .

All as per item no. 30 but One light point controlled by two 2 way switches.

All as per item No.109 & 110 above,but point wiring with 2.5 sqmm and earth conductor of size 2.5 sqmm complete all as specified and directed for tOne 6 pin 16/6 amps socket outlet point controlled by one 16 amps switch on independent board.

All as per item no. 111 One 6 pin 16/6 amps socket outlet point controlled by one 16 amps switch on same board.

All as per item No. 110 above ,but point wiring with 4.0 sqmm and earth conductor of size 4 sqmm complete all as specified and directed.

Supply & fixing modular type full flat switches with indicator, 10 Amps, single pole,1way,1 module,240V,AC, ISI Marked complete all as specified and directed. ( Make :- Crabtree code No.ACMSPXW101 or equivalent in Legrand / Schneider)

Supply & fixing modular type full flat switches with indicator, 10 Amps, single pole,2 way,1 module,240V,AC, ISI Marked complete all as specified and directed. ( Make :- Crabtree code No.ACMSPXW102 or equivalent in Legrand / Schneider)

Supply & fixing modular type flat switches with indicator, 16/20 Amps, single pole,1way,1 module,240V,AC, ISI Marked complete all as specified and directed. ( Make :- Crabtree code No.ACMSPXW161 or equivalent in Legrand / Schneider)

Supply & fixing modular type socket with shuttered type 6/10 Amps, 2/3 Pin combined 2 module,240V,AC ISI Marked complete all as specified and directed.( Make :- Crabtree code No.ACUKXXW063 or equivalent in Legrand / Schneider)

Supply & fixing modular type socket with shuttered type 16/20 Amps, 2/3 Pin combined 2 module,240V,AC ISI Marked complete all as specified and directed.( Make :- Crabtree code No.ACUKCXW253 or equivalent in Legrand / Schneider)

Supply & fixing modular type step fan speed regulator 120W, 2 module,230volts,AC, 360 degree rotation 0 to 8 steps, ISI Marked complete all as specified and directed.( Make :- Crabtree code No.ACURFHB008 or equivalent in Legrand / Schneider)

Supply & fixing red color lighting indication lamp switch, single pole,240volts,AC,50 Hz suitable for 1 module ISI Marked complete all as specified and directed.( Make :- Crabtree code No.ACUIIIW060or equivalent in Legrand / Schneider)

Supply & fixing angle lamp holder, insulated body with back plate for batten fittings,ISI Marked latest model complete all as specified and directed.Make:- Crabtree or equivalent in Legrans/Anchor/Havells

Supply & fix ceiling rose, 3 terminal ,PVC/polycarbonate body ISI Marked latest model complete all as specified and directed.Make:- Crabtree or equivalent in Legrans/Anchor/Havells

Supply & fix 20 watt LED light fitting pride essential bright linea white lighting, high quality materials and slim intergrated design,extruded aluminium housing enhances safety, PC diffuser, reliable and robust housing structure ,maximize the endurance over the life time, easy to install, efficency 100 lm/w and including providing coloured end caps, pre-wired, and PVC/Wooden round/square block -02 Nos and connected with LED fitting to ceiling rose terminal and incl removing old unserviceable fitting complete all as specified and directed. Make :- Havells ordering code.LHEXAWP7IN1W020 or equivalent make in Crompton/Philips

Supply and fixing LED 20 watt,6500K, Pride plus inverter batten,decorative type light fitting white lighting, with square profile and polycarbonate channel,lithium lon battery with charging time 8 hours to 10 hours and back up time upto 4 hours high quality materials and design,extruded aluminium housing enhances safety,high quality PC diffuser, easy to install, efficency 125 lm/w and including providing pre-wired, and PVC/Wooden round or square blocks -02 Nos and connected with LED fitting to ceiling rose and removing old unserviceable fitting complete all as specified and directed. Make :-Havells Cat No. LHEXACP7FN1W020 or equivalent make in Crompton/Philips

Supply and fixing 20 watts LED Austra mirror smart light fitting one/two feet long,contemporary design of mirror light complete decorative LED lighting with extruded polycarbonate, environmental friendly, energy efficient, easy to install,PC diffuser, high quality materials,pre-wired including providing PVC round/PVC square blocks-02 Nos and connected with LED fitting to ceiling rose terminal and incl removing old unserviceable fitting complete all as specified and directed.Make :-Havells Cat No. LHEXACP7FN1W020 or equivalent make in Crompton/Philips

Supply and fixed aesthetically designed LED flat panel for surface mounting which provides soft-light and glare free symmetrically illumination 2'x2' LED 40/42 Watt(600x600x70mm) light fitting and including providing internally prewired,LED driver,connector and also can be suspended with provided kit,nut,bolts and washers as per site requirement and including connecting up with ceiling rose to fitting and including removing old unserviceable item complete all as specified and directed.Make:- Havells cat No.PLANOSUR4X1PLS42WLED857S0720 or equivalent in Crompton/Philips any approved make

Supply only, fixed in repairs flexible neo LED strips 24 watt 6000k ,240Volts ,standard length ,single phase with uniform light distribution and long lasting adhesive for perfect cove light,colour as per required and including all connected accessories suitable for proper fixing as per site requirement and removing old unserviceable fitting complete all as specified and directed.Make:- Havells cat No.FLEXISTRIP5MIP2024V2ALED840MODV1or equivalent in Crompton/Philips any approved make

Supply and fixed in repairs LED bldg secruity light fitting of capacity 45 Watt LED street light fitting in aluminium PDC housing, toughened glass cover with IP65 protection with 4/5 KV inbuilt surge protector and cable connection from ceiling rose/looping box/switch board/DBs to light fitting and testing and including removing of old unserviceable item complete all as specified and directed.Make:- Havells cat No.LHETACU7PA7J045 OR equivalent make in Crompton / Philips as approved

S & F Energy efficient and energy saving new generation 10 watts LED bulk head light fitting IP-65 luminaire with opel diffuser pre-wired of luminaires including LED light driver and connected with LED fitting to ceiling rose terminal and incl removing old unserviceable fitting complete all as specified and directed.Make:- Havells cat No.HEXAFT10WLED857SSYMBOPC or equivalent in Crompton/Philips any approved make

Supply and fixed energy saving,environmental friendly,long life asethetic consistancy in multi purpose application with SMD LEDs as light source with driver included,suitable for highlighting architural features or area lighting, light fitting of capacity 60-70 Watt LED, light fitting in aluminium PDC housing, toughened glass cover with IP65 protection with 4/5/10 KV inbuilt surge protector and cable connection from looping box to light fitting and testing and including removing of old unserviceable item complete all as specified and directed.Make:- Havells cat No.JETAQUANTOPLUSFLP60WLED757SYMLENS or equivalent in Crompton/Philips any approved make

Supply & fixing and sheet metal enclosure with acrylic door type, double door ,415 volts AC,VTPN DB, 4 way,8+12 modules, flush mounting with 200amps copper busbar, 2 neutral/earth bars links and MCCB incomer, and MCB SPN/SP/TPN as outgoing and complete for IP43&54 DBs protection and including removing old unserviceable DBs and incl making good the disturbed surfaces to match with existing surface and colour shade complete all as specified and as directed.Make:-Legrand Cat No.5077 30 4 way or equivalent in Hagar/Schneider.Note for item No.22 to 32- MCCB/MCB DBs and MCBs/MCCBs both are used same make only

Supply & fixing and sheet metal enclosure, with acrylic door type, double door, 240 volts AC,SPN,DB, 8 way, flush mounting with 100amps copper busbar,neutral bar,earth bar links and MCB incomer MCB SPN/DP and MCB SP as outgoing for IP 43& IP54 DBs protection nd including removing old unserviceable DBs and making good the disturbed surfaces to match with existing surface and colour shade acomplete all as specified and as directed. Make:-Legrand Cat No.5076 21 8 way or equivalent make in ABB/Havells.

Supply & fix and in repair sheet metal enclosure acrylic door 240 volts AC,SPN distribution board 12 way for flush mounting with 100amps copper busbar,neutral bar,earth bar suitable for MCB incomer of rating upto 100Amps ,MCB SPN/DP, and MCB SP as outgoing and complete connecting cable links with top and bottom removable gland plates with IP 43 DBs protection and including making good the disturbed surfaces to match with existing surface and colour coat all as specified and as directed. Make:- Legrand cat No. 5076 22 12 way or equivalent in Hagar/Schneider

Supply & fix and sheet metal enclosure, with acrylic type double door, 240 volts AC,SPN,DB, 4 way, flush mounting with 100amps copper busbar,neutral bar,earth bar and MCB incomer,MCB SPN/DP, and MCB SP as outgoing for IP 43& IP54 DBs protection nd including removing old unserviceable DBs making good the disturbed surfaces to match with existing surface and colour shade complete all as specified and as directed. Make:-Legrand Cat No.5076 20 4 way or equivalent in Hagar/Schneider

Supply and fix mini MCB,32 A,DP 'C and motor starter including with suitable sunken box in concealed/surface and internally connected properly suitable for cooking electrical appliances including protection and including removing old unserviceable items and making good the disturbed surfaces to match with existing surface and colour shade complete all as specified and as directed. ( Make :- 32A C DP Mini MCB Crabtree code No.DCVNCDPA032,32A Motor starter Crabtree code No. ACVSMXW321or equivalent in Legrand / Schneider)

Supply & fix MCB SP 6 to 32 Amps 10 KA,"C" series,AC,240Volts,50Hz , ISI marked and including removing old unsv items complete all as specified and directed.Make:- Legrand/Hager/Havells or as approved make

Supply & fix and MCB SPN 32 to 40 Amps 10 KA,"C" series,AC,240Volts,50Hz, ISI marked and including removing old unsv items complete all as specified and directed.Make:- Legrand/Hager/Havells or as approved make

Supply & fix and MCB SPN 40 to 63 Amps 10 KA,"C" series,AC,240Volts,50Hz, ISI marked and including removing old unsv items complete all as specified and directed.Make:- Legrand/Hager/Havells or as approved make

Supply and fix MCB FP, 63 Amps 10 KA,"C" series,AC,415Volts,50 Hz,ISI Marked and including removing old unsv items complete all as specified and directed..Make:- Legrand/Hager/Havells or as approved make

Supply and fixing 2 mm thick sheet steel enclosure and proper compact air insulated rising main with copper bus bar 200 - 315 amps,RYB bus bars breaking capacity of 35 KA and IP 54 protection and including nececessary fixing arrangements on wall/ concealed and providing nuts,bolts and washers and including providing proper working space and proper size and distance of bus bar as per IS complete all as specified and directed. Make- Havells/Standard/HPL/Legrand/Indo Asian

Supply and fixing 2 mm thick sheet steel enclosure suitable for MCCB,4 pole ,415Volts, up to 160 amps,RYB bus bars links of breaking capacity of 16/18KA and IP 54 protection and including nececessary fixing arrangements on wall/ concealed and including removing old unsv items complete all as specified.Make:- Legrand/Havells/Standard/IndoAsian

M & L for sub main wiring complete with 4 run of 10 sqmm single core copper conductor (ISI marked)cable 1100 volts grade, ISI marked,FRLSH type (conforming to IS-694/1990 as amended) PVC insulated, unsheathed,flexible,multi stranded colour coded cables drawn through and including rigid PVC conduit ISI marked medium grade(MMS) with all connected accessories such as Bend,Tee,Elbow,Short peices etc concealed in wall/roofs/floors and including one run of 10 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade, ISI marked FRLSH type as earth continuity conductor connected to common earth dolly and including removing old unsv sub main wiring and making good the disturbed surfaces to match with existing surface and colour shade and complete all as specified and directed. Note : - Four run of 10 sqmm single core copper conductor cable and one run of 10 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit.Make for item No 33 to 36 :- (1).PVC Copper conductor cable FRLSH type :-Finolex / Havells / RR Kabel / Polycab.(2) PVC conduit (MMS)/PVC Casing & Caping & Accessories ISI Marked :-Presto Plast/Finolex/Kalinga Gold/Plaza/AKG Plastics Pvt Ltd

M & L for sub main wiring complete with 2 run of 10 sqmm single core copper conductor (ISI marked)cable 1100 volts grade, ISI marked,FRLSH type (conforming to IS-694/1990 as amended) PVC insulated, unsheathed,flexible,multi stranded colour coded cables drawn through and including rigid PVC conduit ISI marked medium grade(MMS) with all connected accessories such as Bend,Tee,Elbow,Short peices etc concealed in wall/roofs/floors and including one run of 10 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade, ISI marked FRLSH type as earth continuity conductor connected to common earth dolly and including removing old unsv sub main wiring and making good the disturbed surfaces to match with existing surface and colour shade and complete all as specified and directed. Note : - Two run of 10 sqmm single core copper conductor cable and one run of 10 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit.

M & L for sub main wiring complete with 2 run of 6 sqmm single core copper conductor (ISI marked)cable 1100 volts grade, ISI marked,FRLSH type (conforming to IS-694/1990 as amended) PVC insulated, unsheathed,flexible,multi stranded colour coded cables drawn through and including rigid PVC conduit ISI marked medium grade(MMS) with all connected accessories such as Bend,Tee,Elbow,Short peices etc concealed in wall/roofs/floors and including one run of 6 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade, ISI marked FRLSH type as earth continuity conductor connected to common earth dolly and including removing old unsv sub main wiring and making good the disturbed surfaces to match with existing surface and colour shade and complete all as specified and directed. Note : - Two run of 6 sqmm single core copper conductor cable and one run of 6 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit.

M & L for sub main wiring complete with 2 run of 4 sqmm single core copper conductor (ISI marked)cable 1100 volts grade, ISI marked,FRLSH type (conforming to IS-694/1990 as amended) PVC insulated, unsheathed,flexible,multi stranded colour coded cables drawn through and including rigid PVC conduit ISI marked medium grade(MMS) with all connected accessories such as Bend,Tee,Elbow,Short peices etc concealed in wall/roofs/floors and including one run of 4.0 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade, ISI marked,FRLSH type as earth continuity conductor connected to common earth dolly and including removing old unsv submain wiring and making good the disturbed surfaces to match with existing surface and colour shade and complete all as specified and directed. Note : - Two run of 4 sqmm single core copper conductor cable and one run of 4.0 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit.

Supply and fix suitable for flush mounting sheet steel enclosure metal clad plug and socket including MCB SP 20 Amps, 10KA 'C 'series, 230 Volts suitable for AC's/Geysers complete all as specified and directed.Make:- Legrand / Hager/ Havells or as equivalent approved make

Supply and fix MCCB, 100 Amps,63 pole,415 Volts , 16/18KA thermal magnetic type with necessary lugs,thimbles, nuts bolts and washers and including removing old unserviceable item from existing loaction complete all as specified and as directed. Make:- Legrand / Hager/ Havells or as equivalent approved

Supply and fix MCCB, 125 Amps,4 pole,415 Volts , 16/18KA thermal magnetic type with necessary lugs,thimbles, nuts bolts and washers and including removing old unserviceable item from existing loaction complete all as specified and as directed. Make:- Legrand / Hager/ Havells or as equivalent approved

Taking down old unserviceable ceiling fan of any type/size from existing location and deposit in MES store yard and Supply and fix ceiling fan of size 1200 mm sweep,high speed, single phase, 240Volts,AC, 50Hz, BEE not lessthen 2 star rated as approved colour and including hanging GI hook with necessary connecting accessories and testing complete all as specified and directed.Make:-Havells( ES-50) or equivalent in Orient/Kaithan as approved make

Taking down old unserviceable ceiling fans of any type/sweep from work site and deposit to MES store yard for safe custody and Supply and fixing new ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1320mm sweep. smoke brown wood,Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor(BLDC inverter Technology) complete all as specified and directed.Make:-Havells florette under light SKU Code:-FHCFQSTSBW52 or equivalent in Orient/Kaithan as approved make

Taking down old unserviceable exhaust fans of any type/sweep from work site and deposit to MES store yard Supply and fix new exhaust fan, steel body AC single phase.230Volts of size 300 mm sweep with blades and frame with louvers complete all as specified and directed.Make:-Havells ventil Air DB SKU Code:-FHVVEMTDBB12 or equivalent in Orient/Kaithan as approved make

Taking down old unserviceable exhaust fans of any type/sweep from work site and deposit to MES store yard for safe custody and Supply and fix exhaust fan, steel body AC single phase.230Volts of size 380 mm sweep,900 r/min, with blades and frame with louvers.Make:-Havells Trubo force SP SKU Code:-FHEHDSPDB159 or equivalent in Orient/Kaithan as approved make

Taking down old unserviceable exhaust fans of any type/sweep from work site and deposit to MES store yard for safe custody and Supply and fix exhaust fan, steel body AC single phase.230Volts of size 450 mm sweep,1400 r/min with blades and frame with louvers.Make:-Havells Trubo force SP SKU Code:-FHEHDSPDB189 or equivalent in Orient/Kaithan as approved make

Taking down old unserviceable exhaust fans of any type/sweep from work site and deposit to MES store yard for safe custody and Supply anf fixing exhaust fan made of sturd engineering plastic complete with louvers shutters, voltage 230v,50hz,rpm 1200 copper winding of sweep 250 mm.Make:-Havells ventil Air DX SKU Code:-FHVVEDXOWH10 or equivalent in Orient/Kaithan as approved make

Supply, install,commissioning and testing of commercial Aircurtain unit of size 4 feet suitable for wall mouted type for door suitable for prevention of dustand conditionedair losses, single phase, 220 V, 50HZ, < 75dB noise level,made out of MS/CRCA sheetof minimum thickness 18gauge finished with two coats of red oxide primerand final coat of synthetic enamel paint (ovenbaked) with MS -CRC 18 gauge square perforated suction grills,Aluminium alloyfans and singlephase electric motor,nozzlesetc, complete with fittings and accessories so as to produce 2 - 2.5m/sec air velocityat floor level fordoor opening as specified. Make - Almonard 4ft or equivalent in any approved make.

Taking down old unserviceable geyses of any capacity from work site at any height and deposit to MES store yard for safe custody and Supply and fix new electric water heater, storage type steel body/plastic body with copper inner tank and heating element upto 2 KW capacity 25 litres, BEE 5 star rated complete with all accessories such as safety valve,thermostat, NRV, Hot water and Cold water heavy duty connection pipes-02 Nos,holefasterns-04 Nos and necessary accessories as per site requirement etc.complete all as specified and directed.Make:-Havells Fabia SP SKU Code:-GHWAFATWB025 whiteblue or equivalent in Orient/Kaithan as approved make

Material and labour for Earthing complete with galvanised steel earth plate electrode 600mmX 600mmX 6mm thick buried directely in ground vertically ( earth pit not less than 2.25 meters deep below ground level) with top edge of plate not less than 1.5 metres below ground level, connected to and including galvanised iron wire 4 mm dia and light grade protection pipe of 15 mm dia from earth electrode up to test point or up to 7.5mtr whichever is less by means of GI bolts, nuts, check nuts and washers all as per electrical plate No 3 of SSR Pt-I and GI watering pipe of 20 mm dia medium grade,GI funnel with wire mesh,including charcoal, salt packed all around the earth electrode plate in layers, PCC earth pit chamber 1:3:6 type C1, of size 45X 45X 45 CM,RCC cover 1:2:4 type B1 of size 45X45X6 CM, excavation/earth work in any strata and returning filling, removal of surplus soil and testing/test point for required value including removing old item complete all as specified and directed.

Supply, installation,commissioning and testing of maintenance free Chemical earthing electrode made of steel circular rod with molecularly bonded copper surrounded with 50 kgs (chemical compound earthing chemical compound of 50 kgs bags standards as IS-3043 and IEEE80-2000 Resistivity 0.23 ohms per mtr chemical composition as per IS standards retaining moisture capacity (ph value 7.8 ROHS complying IEC 62561-7) of environmental friendly ground enhancing compound shall be eco friendly copper bounded thickness 250 micron on out surface copper bonded dia 80 mm length 3 mtr tested as per IEC 62561-2,Tested 42 KA to 80 KA peak meets the requirements as per IS 3043 IEC 60364-5-54 IS 9001: 2015 quality management system suitable for paratonex sira 60 turkey lightning arrester/lightning protection system based on proactive early streamer Emission(ESE) protection consisting of single pit of minimum 3 mtr depth filled with earth enhancing power compound of minimum 50Kgs, with Earthing Electrode of size 80mm dia, length 3000mm including 03 Nos Earthing electrodes, test link box, 3Nos HDPE Earth pit chamber cover, including suitable size of lugs with insulator and including removing old unserviceable items complete all as specified and directed. (Make: Techno Power or equivallent) Note:-1. Chemical (maintenance free) earthig work carried by OEM only. 2 Earthing conductor from earth plate to equipment/ESE system upto 7.5 m length deemed to be included in the rate quoted by the contractor and beyond 7.5 m will be measured and paid under the respective item of the schedule. 3.cost of chemical ,excavation,returining and filling,earthing work required based on the nature of earth pit for satisfactory completion of job deemed to be inclusive in the unit rate. 4. Necessary insulators and suitable nuts,bolts and washers as per site requirement complete all as directed. 5.Necessary Earth pit as per IS is deemed to be included in quoated rate only. 6.Earthing test point for each chemical earth pit for testing and maintenance. 7 The make shall be of manufactures as listed in perticular specification here-in-after.8.The necessary connected accessories and hardwares as per site requirement complete all as directed.9.HDPE Earth pit chamber cover 5 to 6 ton capacity complete all as directed.10. Making of Earth pit number proper letters writing on the earth pit complete as directed.

Supply and fixing, commissioning and testing of paratonex sira 60 turkey lightning arrester lightning protection system based on proactive early streamer emission (ESE) terminal. Techonology confirming to NFC 17-102-2011 Sept and UNE 21186 Standards.Non electronic base digital ground device upto 200KA connections shall emit electromagnetic impulse in the form of a streamer into the air micronsecond earlier than Naturally device confirming to NFC 17-102 Standards lightning impulse current 10/350 us in 300 KA tested stainless steel material (304L) suitable for corrosive environmental radius 107 mtr in level 4 protection(standard protection advanced triggering delta T 60 us ESE type lightning arrester with non electric early streamer emission standardized according to norms UNE 21.186 and NFC 17.102 duly tested and certified & METU Turkey having coverage areaof 107 Mtr (Level 4) having lightning charge capacity 300 KA with triggering tme of 60 micro seconds early warning time inflow comes with 20 years warranty and including removing old unserviceable items complete all as specified and directed. Make:- Techno Power ( Paratonex Sira 60 or equivallent) .Note:-1. Paratonex sira 60 system work carried by OEM only. 2. The make shall be of manufactures as listed in perticular specification here-in-after

Supply, Installation,commissioning and testing of lightning strike counter (LSC),Lightning flash counter working electro mechanically without any power supply not resttable type with the minium sensitivity of 200KA analogue display model electromechanical display (non resettable ) tested as per IEC 60060-2 degree of protection IP-65 IEC-529 Enclosure material plastic operation temperature 20-85 strike analogue display counter and incl providing copper test link box-01 per earthing and including removing old unserviceable items complete all as specified and directed. (Make: Techno Power or equivallent) Note:-1. LSC system work carried by OEM only. 2. The make shall be of manufactures as listed in perticular specification here-in-after

Supply, errect, installation of octagonal pole high mast 5 mtr length,with flange at bottom 100 mm dia and top 80 mm dia and suitable fixing arrangements for mounting ESE Lightning Arrester with ESE high grade insulators, anticorrosive with solar LED light indicator with adaptor and connected works.Providing anchorage steel wire rope 5 mm dia for four sides with nuts,bolts and washers and necessary fixing arrangements and including providing RCC block of size 0.75mtr X 0.75 mtr, and incl providing grouting with bolts and nuts for bottom flange plate arrangemets of octagnal pole buttom plate and necessary hardwares and including removing old unserviceable items complete all as specified and directed.(Make: Techno Power or equivallent) Note:-1. High mast poles and connected materials by OEM only. 2. The make shall be of manufactures as listed in perticular specification here-in-after

Supply and fixing down conductor 70 sqmm, single core, heavy duty insulated copper conductor and including providing suitable DMC insulators suitablefor outdoor type.One DMC insulator used for one metre copper conductor cable fixed on wall/roop etc and including nuts,bolts and washers. Complete down copper conductor cable through HDPE pipe laying from ESE lightning strike terminal to chemical earthing test point complete all as specified and directed.Make of copper cable:- Havells or eqvivalent in Polycab/Finolex/RR kable

Supply, laying & testing PVC insulated armoured, heavy duty electric cable with stranded aluminium conductor,1100 volts of cross sectional area 35 sqmm,3.5 core including testing complete all as specified and directed.Make:-Havells/polycab/Finolex

Supply, laying & testing PVC insulated armoured, heavy duty electric cable with stranded aluminium conductor,1100 volts of cross sectional area 25 sqmm,4 core including testing complete all as specified and directed.Make:-Havells/polycab/Anchor

Supply and providing river sand for cushioning with dry clean sand 15 cm below cable and 8 cm above the under ground cables and necessary fillings in the trenches and punning to provide required cover complete all as specified and directed.

Supply and laying bricks burnt clay bricks sub class 'B' for cable of size 250 x 115 x 75mm for protection under ground cable complete all as specified and directed

Excavation in trenches , not exceeding 1.5 mtr wide and not exc 1.5 mtr depth for laying of cables, pipe lines, protection pipes and foundations etc and getting out in soft /loose soil complete all as specified and directed.

Returning filling in soil including spreading leveling watering and well rammimg in layer n exc 25 cm complete all as specified and directed

Removing excavated soil not exc 50 mtr ant depositing where directed at a level not exc 1.5 mtr above the starting point all as specified and directed

Boaring holes excavation by trencheless technology across the road,pavement,hard standing by trenche technology using ultra sounding technique and necessary machine and necessary T&P and including providing cable protection HDPE ring pipe 100MM dia heavy duty suitable for 0.4 mpa working for passing of UG cable and without any damages the existing road surfaces and any other UG cables, signal cables, OFC cables and any other assets complete all as specified and as directed.Note:- During excavation/trencheless excavation any other assetes damaged on site the contrator should be responsible for the making good and including replacing the new material/ item incl labour& repair cost etc with out any extra cost from the department.

Material & labour for GI pipe 80 mm "light grade" laid in trenches floors/on , pole/road for cable protection with all fittings complete all as specified and directed .Make: Tata/Swastik/Jindal

Material and labour for PCC 1:4:8 type D2 using (40 mm graded stone aggregate) for making good of road cutting portion, mass concrete, filling of foundations etc including necessary use and waste of form work complete all as specified and directed

Material and labour for PCC 1:3:6 type C2 using (40 mm graded stone aggregate) for making good of road cutting portion mass concrete, filling of foundations etc including necessary use and waste of form work complete all as specified and directed

Shree Mahavir Associates

R J ENTERPRISES

R K Traders

M/s M M Engineering Systems

V.Venkata Ramaiah

M/S S.K GHOSE

M/S JAGANNATH SASMAL