SPECIAL REPAIR TO MD ACCN OF BLDG NO P-107 AND P-108 AT AF STN CHANDINAGAR UNDER GE (AF) FARIDABAD

Amount

Taking down old roof treatment in any description incl scrube and loose concrete, tiles, plaster, bitumen, oil grases and any other materials that might effect adhesion by wire brushing the surface and cleaning of the surface throughly with water and disposed off old materials from in any floors complete all as specified and directed by Engineer-in-Charge.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size exc 1.50 sqm but n. exc 4.0 sqm each complete all as specified and directed by Engineer-in-Charge.

All as item No 02 above but not exc 1.5sqm each complete all as specified and directed by Engineer-in-Charge.

M&L for 40mm thick cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in padding/ base on roof complete all as specified and directed by Engineer-in-Charge.

M&L for Rendering 10mm thick on concrete surfaces in CM 1:4 with WPC and finishing the surface fair and even complete all as specified and directed by Engineer-in-Charge.(water proofing compound measured and paid saperately)

Supply only integral water proofing (ISI marked) compound complete all as specified and directed by Engineer-in-Charge.

M&L for Brick work with sub-class 'B' bricks straght or curved on plan exc 6m mean radius built in CM 1:6 incl demolition of brickwork or stone/boulder masonry built in cement mortar or cement lime mortar complete all as specified and directed by Engineer-in-Charge.

M&L for Non-skid ceramic coloured tiles 7 to 8mm thick (squre/rectangular) area of each tile exc 0.11sqm but n.exc 0.18 sqm, in floors etc. set and jointed in neat slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in CM 1:6 for laying floor finishes incl dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.

M&L for Glazed ceramic coloured/printed tiles in vertical surface of size 450x300-350x7-8mm thick as in skirting and dado set and jointed in neat cement slurry and pointed in white or colour cement to match incl 10mm thick backing coat in CM 1:4 incl dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.

M&L for 20mm thick granite (of any type) work (table rubbed and polished ) in steps, jambs, pillars, window cills, cooking plateforms and like including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite including moulding work on exposed edges of granite stones incl 15mm thick screed bed in CM 1:6 complete all as specified and directed by Engineer-in-Charge.

M&L for Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey pigment cement and pigments incl 15mm thick screed bed in CM 1:6 for laying floor finishes incl dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.

S&F for Pressed steel frames of size 125 x 60mm for doors , windows and ventilators etc, with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed by Engineer-in-Charge.

S&F for Pressed steel frames of size 105 x 60mm for doors , windows and ventilators etc, with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed by Engineer-in-Charge.

M&L for PCC 1:3:6 type C-1 (using 20 mm graded aggregate stone aggregate) as in filling of pressed steel door frames and similer work etc incl all form work complete all as specified and directed by Engineer-in-Charge.

S&F for Solid PVC Frame of size 50mm x 47mm for door made out of 5mm plain colour PVC Sheet reinforced with MS Square tube complete all as specified and directed by Engineer-in-Charge.

S&F for factory made 35mm 2nd class hardwood Plain, framed panelled shutters (any No of panels) with lock rail and panel of 12mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed by Engineer-in-Charge.

S&F for 30mm thick 2nd class hardwood glazed and skeleton shutters open rebated and prepared to receive glass, gauge etc (without sash bar) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as per SSR-Part-I Section-8, Clause 8.24 (a) etc complete all as specified and directed by Engineer-in-Charge.

S&F for 30mm thick 2nd class hardwood glazed and skeleton shutters for windows, ventilators, etc. open rebated and prepared to receive glass, gauge etc (without sash bar) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as per SSR-Part-I Section-8, Clause 8.24 (b) etc complete all as specified and directed by Engineer-in-Charge.

S&F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC’C’ channel having a PVC sheet strip of 20mm width stuck in side with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail, and bottom rail: on either side and as gap insert for top rail and bottom rail Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stile and rail with suitable PVC sheet beading, and joined to gather with solvent cement, supplying and fixing in the frame at site as per specification and drawing complete all as specified and directed by Engineer-in-Charge.

S&F for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings, (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed by Engineer-in-Charge.

S&F for Mild steel, plain, black sheet 0.80mm in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed by Engineer-in-Charge.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 including dismantling old one complete all as specified and directed by Engineer-in-Charge.

S&F for 18/19mm Prelaminated particle board , exterior grade pre laminated one side with decorative choice lamination and other side balancing white lamination fixed with screws or nails to frame complete all as specified and directed by Engineer-in-Charge.

M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 and finishing the surface fair and even complete all as specified and directed by Engineer-in-Charge.

M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 and finishing the surface fair and even incl taking down cement plaster on brick or stone wall etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.

M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:6 and finishing the surface fair and even incl taking down cement plaster on brick or stone wall etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.

M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:4 and finishing the surface fair and even incl taking down cement plaster on brick, concrete or ceiling etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.

M&L for preparing new plastered surfaces and applying two coats of cement base paint including priming plastered surfaces with alkali resistant complete all as specified and directed by Engineer-in-Charge.

M&L for prepararing old external surfaces of walls including brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coats of cement base paint on walls complete all as specified and directed by Engineer-in-Charge.

M&L for preparing new plastered surfaces and applying two coats of distemper oil emulsion including priming plastered surfaces with alkali resistant primer complete all as specified and directed by Engineer-in-Charge.

M&L for prepararing old external surfaces of walls including brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coats of distemper oil emulsion on wall complete all as specified and directed by Engineer-in-Charge.

M&L for preparing new plastered surfaces and applying three coats of white wash on new plaster surfaces on ceilings complete all as specified and directed by Engineer-in-Charge.

M&L for preparing of old previously treated plastered surface of ceilings including cornices etc, and cleaning by brooming down and applying one coats of white wash on ceiling complete all as specified and directed by Engineer-in-Charge.

M&L for preparing of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new or previously untreated steel surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zink cromium primering complete all as specified and directed by Engineer-in-Charge.

S&F for 100mm long butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B-21, complete all as specified and directed by Engineer-in-Charge.

S&F for 100mm long butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed by Engineer-in-Charge.

S&F for 150mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed by Engineer-in-Charge.

S&F for 150mm long mild steel barrel tower bolts complete all as specified and directed by Engineer-in-Charge.

S&F for 150mm long Aluminium handles cast type, anodised complete all as specified and directed by Engineer-in-Charge.

S&F for 150mm long mild steel pressed handle in any shape and fixed complete all as specified and directed by Engineer-in-Charge.

S&F for 300mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed by Engineer-in-Charge.

S&F for MS 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed by Engineer-in-Charge.

Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed by Engineer-in-Charge.

S&F for Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed by Engineer-in-Charge.

M&L Sheet glass, ordinary quality 3mm thick and glazing with oil putty in square exc 0.5 sq. m in each pane, fixed in any position in woooden or steel frame complete all as specified and directed by Engineer-in-Charge.

S&F in repair pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe 15 mm bore complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 15 mm bore chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed by Engineer-in-Charge.

S&F in repair angle cock / stop cock cast copper alloy, fancy type chromium plated, 15 mm dia of bore complete all as specified and directed by Engineer-in-Charge.

S&F in repair Stop valves, fancy type, chromium plated with long shank and cup (concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for15 mm bore iron pipe or for unions and fixed complete all as specified and directed by Engineer-in-Charge.

S&F in repairs PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed by Engineer-in-Charge.

S & F in repair 10 ltr cxapacity PVC valveless , syphonic actoin type, flushing cistern, low level white, with inlet ball valve , float & handle including brackets complete all as specified and directed by Engineer-in-Charge.

M&L in repairs Brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipeor union complete all as specified and directed by Engineer-in-Charge.

S&F in repair Soap dish, viterous china white of size 160x160x90 mm fixed to plugs with chromium plated brass screws complete all as specified and directed by Engineer-in-Charge.

S&F for Tubular towel 20mm dia D type 60 CM long between flanges, aluminium anodised complete all as specified and directed by Engineer-in-Charge.

S&F for harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed by Engineer-in-Charge.

S&F for steel grating doom 125mm dia with waste hole complete all as specified and directed by Engineer-in-Charge.

S&F in repair Vitreous China wash basin, white, flat back, size 550X400 including brackets, 32 mm dia waste coupling of PTMT (min weight 45gms) and 32 mm dia waste pipe complete all as specified and directed by Engineer-in-Charge.

S&F for Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests,traps, bends etc (excluding flushing cistern and flush pipe) fixed in repairs complete all as specified and directed by Engineer-in-Charge.

S&F in repair gun metal globe or gate valve 20mm bore with iron wheel head screwed both ends for iron pipe complete all as specified and directed by Engineer-in-Charge.

S&F 20 mm bore steel water tubes, medium grade, galvanised with all fittings and fixed complete to walls/ceilings with soilid iron hooks (one hook per mtr) or laid in floors incl taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and directed by Engineer-in-Charge.

S&F 15mm bore steel water tubes, medium grade, galvanised with all fittings and fixed complete to walls/ceilings with soilid iron hooks (one hook per mtr) or laid in floors incl taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and directed by Engineer-in-Charge.

Disconnecting existing water tanks of capacity n exc 500 ltrs for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position incl cleaning and removing all scale and dirt, etc from tanks and from mouths of circulating pipes, etc complete all as specified and directed by Engineer-in-Charge.

S&F for 500 litres capacity rotational moulded, triple layer polythene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position on roofs including fittings incl 20mm bore brass ball valve high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed incl dismantling watertanks and removing to store complete all as specified and directed by Engineer-in-Charge.

S&F for PVC (SWR) pipes 110mm single socketed in any length with rubber ring joints fixed to walls with stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof (one clamp per mtr) incl demolition and breaking up drain pipe 100/75mm bore salt glazed stone ware/AC/PVC pipe complete all as specified. complete all as specified and directed by Engineer-in-Charge.

S&F 110mm PVC (SWR) bends in any radius complete all as specified and directed by Engineer-in-Charge.

S&F 100mm PVC (SWR) vent cowl complete all as specified and directed by Engineer-in-Charge.

S&F 110mm PVC (SWR) floor trap, plain with grating incl jointing with solvent cement complete all as specified and directed by Engineer-in-Charge.

Providing water proofing treatment to old RCC roofs surface with polymer based liquid water proofing solution by using any of the following proprietary products or equivalent approved by E-in-C’s branch all as directed. Notes:- 1. List of products (a) Brushbond roofgaurd manufactured by M/s Fosroc Chemicals (India) Pvt Ltd. (b) Dr. Fixit New Coat manufactured by M/s Pidilite Industries Limited. (c) Sikalastic – 560 in combination with Sikafab1 or Sika Reemat manufactured by M/s Sika India Pvt Ltd. 2. Removal of existing roof treatment shall be measured and paid separately in item No 1 here-in-above.

Note:- Item No 2 Contd…/- 3. All the listed products are of proprietary nature and shall be applied strictly as per manufacturer instructions in 3 coat system. The work shall be executed through authorised service representative of the manufacturer after obtaining approval from the GE by providing requisite proof of service representation of the manufacturer. All works shall be carried out in presence if the authorised representative of the department entreated with the work. Record in this regard shall be maintained. 4. Mixing of two brands in single location is strictly prohibited. 5. Primer to be applied before applying roof treatment coating shall be of the same manufacturer as per manufacturer advice. Requisite repair to subcrete, if necessary, shall be done as per manufacturer instruction and cost thereof shall be deemed to be included in the quoted rate.

Note:- Item No 2 Contd…/- 6. Screed bed in CM (1:4) shall be applied over top coating (3rd coat) which will be measured and paid separately under item No 5 here-in-after. However clean dry coarse sand shall be sprinkled over top coating before providing the screed and cost of the same shall be deemed to be included in unit rate quoted against this item. 7. Before commencement of the work, a brochure containing details of the product and application process duly certified by the manufacturer shall be submitted to GE. The contractor shall also be responsible to produce Purchase Voucher of total quantity of the proprietary materials incorporated in this item before claiming any payment. No payment against item No 70 shall be allowed in parts for the quantity involved in a single building and also before satisfactorily results has been obtained through water pounding test.

Note:- Item No 2 Contd…/- 8. The contractor shall furnish a guarantee for effectiveness of roof treatment work for a period of 10 years from the date of completion of this contract and shall be responsible to the complete roof treatment work for the complete building (if any leakage/seepage is noticed in any building receiving the treatment within the guarantee period) without any extra cost to the Government by complete removal of the executed roof treatment work and stand guarantee for further 10 years from the date of physical completion of the roof treatment repair work. An amount equal to 2.50 % (Two Point Five Zero Percent) of the total cost of roof treatment work executed (item No 4, 5, 6 and 70 of Sch ‘A’/BOQ) subject to a minimum amount of Rs 5,000/- shall be retained from the final bill of the contractor a security deposit against efficacy of roof treatment which shall be released after expire of the guarantee period subject to no defect is notified to the contractor within the guarantee period. However, if any rectification work is notified to the contractor but not attended by the contractor, within the stipulated guarantee period, the total amount of security deposit shall be forfeited and shall be at the disposal of the President of India. No claim whatsoever on this account shall be entertained at a later date.

Note:- Item No 2 Contd…/- 9. Further, in the event of any rectification work carried out by the contractor, the security deposit shall continue to be retained by the department till expiry of a period of 10 years from the date of completion of rectification work. This additional period shall be known as extended guarantee period. However, this extended guarantee period shall not be applicable for the work in building not notified for rectification work within the original guarantee period of 10 years from the date of completion of the contract. 10. Same procedure as required for release of Performance Security deposit shall be applicable for seeking release of the security deposit against roof treatment work after expiry of guarantee period/extended guarantee period (as applicable for the instant case). 11. The contactor may, if so desired, furnish the guarantee amount in the same format as applicable for the performance security deposit.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed by Engineer-in-Charge.

Taking down carefully serviceable light fittings / fans / geysers etc any type from site keeping safe custody or depositing in MES and refixing the same on completion of civil and E/& M works incl making necessary connection with suitable copper wire and testing complete all as specified and directed by Engineer-in-Charge.

M&L for point wiring with single core PVC insulated unsheathed 1100 volt grade cable with multistranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium duty ISI marked not less than 20mm dia, fixed in wall, on roof with GI saddles GI screws, rawal plugs (concealed conduit in wall wiring) with all fittings including Tee, junction boxes and provision of pressed steel terminal box of suitable size with 3 mm thick hylam laminated white sheet cover for mounting switch sockets and regulators and drawing continuous earth wire with and including PVC insulated unsheathed 1100 volts grade cable with multistranded coper conductor of size 1.5 Sq mm (Nominal area) complete all as specified and directed by Engineer-in-Charge.for following (Color coding to be followed) :- (a) One light/fan point controlled by one switch.

All as per item No 77 above but One 3/5 pin socket 5 Amp on independent board with 1.5sqmm wire with 1.5 sqmm earth wire

All as per item No 77 above but One bell/buzzer point controlled by one bell push complete all as specified and directed by Engineer-in-Charge

All as per item No 77 above but One 3/5 pin socket outlet 5 Amp on same board, with 1.5sqmm wire with 1.5sqmm earth wire complete all as specified and directed by Engineer-in-Charge

All as per item No. 77 above but 3 pins socket outlet 15 Amps independent with 2.5 sq mm incl contineous earthing with multistandred copper conductor PVC insulated unsheathed size 2.5 Sq mm complete all as specified and directed by Engr-in Charge. Note:- {For item No 73 to 77} Cost making good disturbed surface below existing point wiring taken out vide item No 03 & 04 and cutting chases and making good of disturbed surfaces by cement & sand mortar (1:3) and surface finish as per adjustment surface conduit and all accessories as required for concealed point wiring vide item No 3(a) to 3(d) & 4 as applicable shall be deemed to be included in the unit rate quoted against these items.

M&L for switch piano type 5 Amps, single pole one way complete all as specified and directed by Engineer-in-Charge

M & L for socket outlet 5 pin , 5 Amps flush type complete all as specified and directed by Engineer-in-Charge

S&F bell push flush type switch complete all as specified and directed by Engineer-in-Charge

M&L for switch piano, flush type 15 Amps single pole one way complete all as specified and directed by Engineer-in-Charge

M&L for socket outlet 2 in 1, 3 pin, 5 and 15 Amps Flush type complete all as specified and directed by Engineer-in-Charge

S & F stepped type electronic fan regulator flush type complete all as specified and directed by Engineer-in-Charge

S&F for ceiling rose surface bakelite 65x50mm two to three terminals complete all as specified and directed by Engineer-in-Charge

S&F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed by Engineer-in-Charge

Supply and fix 9w LED bulb, 230 volts complete all as specified and directed by Engineer-in-Charge

S&F single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with plug top 20 amps with MCB SP 230 Volt 20 Amps and including taking down complete all as specified and directed by Engineer-in-Charge

S & F LED Tube light self ballasted batten 1 x 20 W, 230 V , 4 feet long extruded aluminium body with PC diffuser , integral isolated driver more than 120 degree wide light CCT 6500 k complete with all accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable and tubes with suitable size as directed and including taking down complete all as specified and directed by Engineer-in-Charge

S & F energy efficient wall mounted LED bulk head 1 x 10 W, 230 V , made up of plastic housing & enclosed with cover IP65 and including taking down complete all as specified and directed by Engineer-in-Charge

M&L for rewinding of burnt fan motor of 1200 mm sweep ceiling fan with super enamelled copper winding wire of suitable guage as per details details of any make /model complete all as specified and directed by Engineer-in-Charge

Sub main wiring alongwith earth wire, single core cable, 2x6 Sqmm, PVC insulated PVC unsheathed stranded FR copper conductor cable in and including PVC concealed/ surface conduit of earth wire with 1x4 Sq mm copper cable fixed along with the sub main in PVC conduit and connecting to earth dolly and including taking down complete all as specified and directed by Engineer-in-Charge

S&F SPN MCB distribution board 8 Way IP 42 Double door (Power shell) steel sheet Phosphatised powder coated with Din rail removable busbar shrouded neutral link with conditional short circuit rating of 5 KA and including taking down complete all as specified and directed by Engineer-in-Charge

S&F Distribution board 6 way TP&N Double Door are fitted with Bus Bars, Neutral Links suitable for 415V, 50Hz, Blanking Plates, Suitable for TP/FP MCB and including Taking down complete all as specified and directed by Engineer-in-Charge

S&F MCB TPN 63amp C Series Amps and including taking down complete all as specified and directed by Engineer-in-Charge

S&F MCB SPN 32 amp C Series Amps and including taking down complete all as specified and directed by Engineer-in-Charge

S&F MCB SP 6- 32 A B series Amps and including taking down complete all as specified and directed by Engineer-in-Charge

Supply and fixing capacitor, capacity 3.15 mfd in replacement complete all as specified and directed by Engineer-in-Charge

Supply & Fixing of Meter box sheet metal enclosure concealed type made of metal of size 32 x 25 x 14 cm having suitable incoming and outgoing openings for cables complete all as specified and directed by Engineer-in-Charge

M&L for rewinding of burnt motor upto 300mm sweep exhaust fan with super enamelled copper winding wire of suitable guage as per details details of any make /model complete all as specified and directed by Engineer-in-Charge

M & L for Earthing in repairs complete with galvanised steel earth plate electrode 600 x 600 x 6.0 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of earth plate not less than 1.5 meters below ground level connected by GI wire,4.0 mm dia as earth lead by means of nuts and bolt,thimbles, check nuts, washers of GI or steel including PCC (concrete chamber) shall be PCC 1:3:6 type C-1 using 20 mm graded stone aggregate,with fair finish,internal surface of concrete chamber shall be given internal dimension 300 mm x 300 mm x300 mm,15 mm thick plaster in CM 1:4,funnel with wire mesh,80 mm thick RCC pit cover 320 x 320 mm of RCC 1:2:4 Type B1 using 20 mm graded stone aggregate reinforced. XPM jally and charcoal,dust and common salt all as shown in electrical plate No 3 of MES SSR Part -1 (2009) and specified,provision of GI wire upto 7.5 metre long protected by 20 mm dia light grade pipe and watering pipe shall be 15 mm bore light grade ,excavation, earth work,connecting the earthing to an earthing test point or to main switch board as specified and testing on completion complete all as specified and directed by Engr-in-Charge. Note: RCC pit cover shall be precast of RCC (1:2:4) type B1,80 mm thick reinforced with XPM weighting not less than 4 kg/Sqm in lieu of CI cover.

Singh Associates

NAVEEN KUMAR TYAGI