Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹21.6 LAccepted-AOC | ₹21.6 L Quoted ₹18.3 L | L-1 | Accepted-AOC Quoted lowest rate. |
| 2 | L-2₹23.6 L+₹5.3 L (28.9%)Rejected-Finance SHOP NO 27 SANJAY GANDHI MARKET NAGPUR ROAD CHANDRAPUR CHANDRAPUR MAHARASHTRA 442401 | CHANDRAPUR | MAHARASHTRA | 442401 | ₹23.6 L+₹5.3 L (28.9%) | L-2 | Rejected-Finance Quoted higher rate than L-1 |
| 3 | L-3₹23.9 L+₹5.6 L (30.8%)Rejected-Finance | ₹23.9 L+₹5.6 L (30.8%) | L-3 | Rejected-Finance Quoted higher rate than L-1 |
| 4 | L-4₹24.0 L+₹5.8 L (31.5%)Rejected-Finance | ₹24.0 L+₹5.8 L (31.5%) | L-4 | Rejected-Finance Quoted higher rate than L-1 |
| 5 | L-5₹24.9 L+₹6.6 L (36.2%)Rejected-Finance | ₹24.9 L+₹6.6 L (36.2%) | L-5 | Rejected-Finance Quoted higher rate than L-1 |
Tender Value
₹41.5 L
EMD Value
₹51,900
Closing Date
23 Dec 2023, 5:00 pmClosed
SOENM, WANI AREA
AGM OFFICE, WCL WANI AREA , URJAGRAM , TADALI , CHANDRAPUR - 442406.
Replacement of feeder panels with MCCB, MCBs, distribution boards for each block, main service cable for each block and providing and fitting of street lights under Mission Sehat at Urjagram Colony Wani Area.
2023_WCL_295885_1
wa4350-enm-0089-2023-24
Open Tender
Electrical and Maintenance Works
Item Rate
60 days
AHQ, WANI AREA
Please refer Tender documents
4 documents required · 4 mandatory
₹51,900
25 Jan 2024
12 Dec 2023
25 Dec 2023
12 Dec 2023
23 Dec 2023
13 Dec 2023
12 Dec 2023 - 16 Dec 2023
Amount
The bidder to quote rates excluding GST and including PF. The bidders may note this while bidding for this tender.
5-7-19 Providing & erecting floor / wall mounting, MCCB panel board with door suitable for three pole incoming 250A, 8 ways three pole outgoing up to 100A MCCB on iron frame in compliance of IEC 61439, as per specification no SW-SWR/MCCBPB. (Excluding MCCB'S) (Material +Labour)
5-7-20 Providing & erecting floor / wall mounting, MCCB panel board with door suitable for three pole incoming 250A, 12 ways three pole outgoing up to 100A MCCB on iron frame in compliance of IEC 61439, as per specification no SW-SWR/MCCBPB. (Excluding MCCB'S).(Material +Labour)
16-3-7 Making cement concrete foundation in 1:3:6 cement concrete, (20 to 25) mm. stone metal duly plastered with necessary curing for complete.(Material +Labour)
5-3-22 Supplying erecting and marking triple pole isolators only switch version of miniature circuit breaker of 63A with required wiring connections and lugs etc. in provided distribution board complete.(Material +Labour)
5-3-23 Supplying erecting and marking triple pole isolators only switch version of miniature circuit breaker of 100A with required wiring connections and lugs etc. in provided distribution board complete. (Material +Labour)
5-3-25 Supplying erecting and marking four pole isolators only switch version of miniature circuit breakers of 63A in provided distribution board complete(Material +Labour)
5-5-2 Providing & erecting ISI Marked 3 Pole MCCB of 200A,415V capacity with short circuit rating 25 kA (Ics=100% of Icu) adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact andMCCB should have phase barriers both sides, in provided enclosure on iron /GI frame as per specification no. SW-SWR/MCCB.(Material +Labour)
5-5-3 Providing & erecting ISI Marked 3 Pole MCCB of 250A,415V capacity with short circuit rating 36 kA (Ics=100% of Icu) adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, in provided enclosure on iron /GI frame as per specification no. SW-SWR/MCCB (Material +Labour)
7-2-33 Supplying, erecting & terminating ISI Marked XLPE armoured cable 4 core 10 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU.(Material +Labour)
7-2-34 Supplying, erecting & terminating ISI Marked XLPE armoured cable 4 core 16 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no.CB-LT/CU(Material +Labour)
7-2-35 Supplying, erecting & terminating ISI Marked XLPE armoured cable 4 core 25 sq. mm. copper conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU(Material +Labour)
7-2-10 Supplying, erecting & terminating ISI Marked XLPE armoured cable 2 core 6 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no.CB-LT/CU(Material +Labour)
1-6-19 Supplying & erecting mains with 4x6 sq.mm. and earth wire 4 sq.mm ISI Marked FR PVC copper wire, in HMS PVC conduit min. 25mm dia, as per specification No: WG-MA/PC..(Material +Labour)
16-1-2 Making trench of suitable width and depth in hard murum / tar road for laying provided LT cable up to and including 16 sq. mm complete as per specification no. CW-EXN-CTR.(Material +Labour)
For laying additional cable in same trench add Rs. 45/- per meter for additional bricks between and above the extra cable.
5-1-27 Supplying and erecting four pole metal clad ON LOAD change over switch 415V, 200A erected on angle iron /GI frame approved make complete(Material +Labour)
5-3-2 Supplying, erecting & marking ISI Marked SPMCB 32A, C-series (for motor/power) in provided distribution board as per specification no. SW-SWR/MCB.(Material +Labour)
5-4-4 Supplying and erecting ISI Marked triple pole and neutral distribution board (TPNDB) surface/ flush mounted SP/TP MCBs of 12 poles/4 ways on iron / GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB(Material +Labour)
5-3-4 Supplying, erecting & marking ISI Marked SPMCB 45A C- series (for motor/power) in provided distribution board as per specification no. SW-SWR/MCB(Material +Labour)
5-3-4 Supplying, erecting & marking ISI Marked SPMCB 63A C- series (for motor/power) in provided distribution board as per specification no. SW-SWR/MCB.(Material +Labour)
2-1-23 Supplying & erecting LED 20W tube light fitting (4 feet) with aluminium housing, heat sink, integrated HF electronic driver complete.(Material +Labour)
2-5-2 Supplying and erecting LED street light fitting suitable for 20 to 25W, with PF > 0.95 class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete as per specification No FG-ODF/FLS-2(Material +Labour)
2-5-6 Supplying and erecting LED street light fitting suitable for above 70W - 75W lamp, including lamp, with PF > 0.95 class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete as per specification No FG ODF/FLS2(Material +Labour)
2-5-18 Supplying and erecting LED flood light fitting of 200W, including lamp, with PF > 0.95,class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete as per specification No FG-ODF/FLS-2(Material +Labour)
Total impact of GST for the purpose of CTC
Sonu Traders and Engineers
SHRADDHA eNTERPRISES
JAY JAGANNATH ELECTRICALS AND CONTRACTORS
M/S USHA ELECTRICALS ENGINEERING WORKS
suyog trading corporation
M S R MURTHY
SHRI RAM ENTERPRISES
stage.html
html • 0.06 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_306450.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .