R and M of various works at room no. 28B at Vidhyut Bhawan, Jaipur

Amount

PART- B (Item Rate Basis)

Disposal of rubbish un-wanted material dismanted material, away from site at appropirate place including all lead and lift, loading unloading, transportation labour etc. As per direction of Engineer in charges.

Repairing of flase ceiling made of gypsum board, dismanteled including all necessary material i.e. gypsum board, frame work etc. complete finished with oil bound distemper

Office Wooden side rack of size 3' x 1.5' x 2.25' made with ISI mark 19mm thick pine board duly laminated with 1mm thick ISI mark mica of good quality having decorative beading on edges with openable door and also having 1 no. Shelves duly laminated by 0.8 mm thick ISI mark good quality mica. The inner surfaces of side rack will be laminated by 0.8mm thick ISI mark good qualirty Mica.

Providing and laying Armstrong or equivalent wooden flooring with a direct laminated surface treated with aluminium oxide on top of a high density fiber board having a click system tounge and groove joint to secure a long distance joint. The planks are of termite resistant and water protected with both side lamination wooden flooring planks of size 1208x192x8mm/1286x192x8mm (8mm thick laminated floor class of use 23/31 having a wear level of AC-3, impact resistance>9mm, moisture resistance 3-10% as per (EN-424, EN-438 EN-425 EN-417-2) or PREN 3329 complete in all respect as per direction of Engineer In charge

Providing and fixing of wall paneling on grid made out of uPVC profile section of size 250 X 8mm with a wall thickness of 1.0mm+/-0.2mm,fixed on the existing wall with screw of size 32mm X 3mm with rowel plug at a spacing of 600mm center to centre.PVC profile section to be fixed on vertical GI channel section 45x15x0.9mm by self tapping screw of size 19mm X 6mm.Necessary cutouts for electrical connection to be provided at required places. The edge and periphery, finally to be covered by extruded PVC beading of H, U and L profile section complete as per manufacture’s specification and direction of Engineer-in-charge complete in all respect.

ASHISH ARTS LLP

ASHISH ARTS LLP