REPAIR REPLACEMENT OF INTERNAL ELECTRIFICATION, CEILING FANS, EXHAUST FANS AND OTHER CONNECTED WORKS IN 13 BRD AND 16 BRD AT AF STN PALAM UNDER GE P AF GURGAON

Amount

M&L for point wiring (concealed on wall & surface/concealed on ceiling) for One light/fan/exhaust/bell controlled by one modular/piano switch one way in different locations/buildings including rigid non metallic PVC conduit, medium grade, ISI marked, 20 mm dia, with 1.5 sq mm FRLS PVC insulated & unsheathed, stranded copper conductor cable, single core, 1100 volts grade, with concealed new metal terminal boxes of 1.6mm size & suitable depth for mounting modular type switches, sockets, fan regulator etc with new inner and outer plates including FRLS insulated and unsheathed solid copper conductor of 1.5 sqmm as continuous earh conected to common earth dolly, including taking down existing point wiring and making good existing surfaces, complete all as specified and derected by Engr-in-Charge.

All as per Ser item No. 1.01 hereinbefore but for One light/ fan or bell point controlled by one switch in existing conduit.

All as per Ser item No. 1.01 hereinbefore but for One 5 Amps 5 pin socket outlet on same board.

All as per Ser item No. 1.01 hereinbefore but for One 5 Amps 5 pin socket outlet on independent board not below the switch board of the light point in the same vertical plane.

All as per Ser item No. 1.01 hereinbefore but for One 5 Amps 5 pin socket outlet on independent board not below the switch board of the light point in the same vertical plane in existing conduit.

All as per Ser item No. 1.01 hereinbefore but for One outlet independent for 15 Amps power point with 4 sqmm copper conductor wire with 2.5 sqmm earth wire.

All as per Ser item No. 1.01 hereinbefore but for One outlet independent for 15 Amps power point with 4 sqmm copper conductor wire with 2.5 sqmm earth wire in existing conduit.

All as per Ser item No.1.01 hereinbefore but for Point controlled by two numbers two way switches.

All as per Ser item No. 1.01 hereinbefore but for Point controlled by two numbers two way switches in existing PVC conduit.

M&L for sub main wiring complete using 2 run of 4 sqmm and one run of 2.5 sqmm, PVC insulated unsheathed FR multistranded copper conductor ISI marked 1100 Volt grade including concealed PVC conduit of medium grade ISI marked with accessories, through wall/ceiling for 20 Amps Metal clad socket outlet one point on one circuit including taking down and making good existing surfaces, complete all as specified and as directed by Engr-in-charge.

All as per Ser item No. 10 hereinbefore but in existing PVC conduit.

M&L for sub main wiring complete using 2 run of 6 sqmm and one run of 4 sqmm, PVC insulated unsheathed FR multistranded copper conductor ISI marked 1100 Volt grade including concealed PVC conduit of medium grade ISI marked with accessories, through wall/ceiling including taking down and making good existing surfaces, complete all as specified and as directed by Engr-in-charge.

M&L for sub main wiring complete using 2 run of 10 sqmm and one run of 6 sqmm, PVC insulated unsheathed FR multistranded copper conductor ISI marked 1100 Volt grade including concealed PVC conduit of medium grade ISI marked with accessories, through wall/ceiling including taking down and making good existing surfaces, complete all as specified and as directed by Engr-in-charge.

S&F switch Modular one module one way 10 Amp complete all as specified and as directed by Engineer-in-charge.

S&F switch Modular one module two way 10 Amp complete all as specified and as directed by Engineer-in-charge.

S&F bell switch Modular one module complete all as specified and as directed by Engineer-in-charge.

S&F switch Modular one module one way 16 Amp complete all as specified and as directed by Engineer-in-charge.

S&F Modular type socket outlet shuttered two module 5 pin 6 amps multipurpose complete all as specified and directed by Engineer-in-charge.

S&F Modular type socket outlet shuttered two module 6 pin 16 amps multipurpose complete all as specified and directed by Engineer-in-charge.

S&F Modular Electronic Fan regulator stepped type two module complete all as specified and as directed by Engineer-in-charge.

S&F in replacement of sheet metal enclosure with socket plug top and 240V Single pole and neutral with two pin, earth plug and socket including single pole MCB 20 Amp, 10 KA complete all as specified and as directed by Engr-in-charge.

S&F in replacement of MCCB 3 pole 415 V fixed type 100 Amps with breaking capacity 16 KA (Loadline) complete all as specified and as directed by Engr-in-charge.

S&F in replacement of MCCB 3 pole 415 V fixed type 125 Amps with breaking capacity 16 KA (Loadline) complete all as specified and as directed by Engr-in-charge.

S&F in replacement of MCCB DB double door type SPN upto 8 way complete all as specified and as directed by Engr-in-charge.

S&F in replacement of MCCB DB double door type TPN upto 4 way vertical type without MCCB complete all as specified and as directed by Engr-in-charge.

S&F in replacement of MCCB DB double door type TPN upto 8 way vertical type without MCCB complete all as specified and as directed by Engr-in-charge.

M/L for earthing complete with steel earth plate eletrode 60cm x 60cm x6mm thick buried directly in ground vertically (earth pit not less than 2.25 mtr below ground level) with top edge of plate not less than 1.5 mtr below ground level connected to GI earth wire 4mm dia by means of bolts. nuts, check nuts and washers etc including protection pipe 15mm dia up to 7.5m length , provision the earth lead to earth connection in ther main distribution box with lugs and GI nuts, bolts, earthing shall be done all as per shown electrical plate No 3 of SSR part 1 Including neccessary excavation in any type of soil, filling earth and 20mm dia water pouring pipe, GI funel, PCC earth chamber,100mm thick precast RCC cover with suitable precast RCC frame and earth test point and testing in presence of Engr -in -Charge complete all as specified.

M&L for opening ceiling fan any type & any make of 1200/1400 mm sweep, cutting the burnt winding, rewinding with super enamelled copper wire as per existing size and gauge with and including provision of insulating material varnishing with good quality varnish including replacement of all unserviceable parts such as safety pin, fan clamp with rubber bush, canopy, twin core flexible copper wire etc complete all as specified and as directed by Engr-in-charge.

M&L for opening wall mounted fan, metal body, any type or sweep & any make, cutting the burnt winding, rewinding with super enamelled copper wire as per existing size and gauge with and including provision of insulating material varnishing with good quality varnish including replacement of all unserviceable parts such as safety pin, fan clamp with rubber bush, canopy, twin core flexible copper wire etc complete all as specified and as directed by Engr-in-charge.

M&L for spray painting of ceiling fan including blades of any size any type with one coat of synthetic enamelled paint after cleaning and making good the old damaged paint including writing MES number with black synthetic enamelled paint complete all as specified and as directed by Engineer- in Charge.

S&F ventilating fan PVC body type 200mm sweep complete all as specified and as directed by Engineer- in Charge. Make:- BAJAJ/ ORPAT/Philips

S&F Ceiling Fan 1200mm sweep 3 blade single phase 5 star energy rating 230V 50 Hz complete with all accessories complete all as specified and as directed by Engineer- in Charge. Make:- BAJAJ/ ORIENT/ Philips

S&F Kitchen exhaust fan 300 mm sweep metal body with front grill complete all as specified and as directed by Engineer- in Charge. Make:- BAJAJ/ ORPAT/Philips

S&F Kitchen exhaust fan 450 mm sweep metal body with front grill complete all as specified and as directed by Engineer- in Charge. Make:- BAJAJ/ ORPAT/Philips

S&F in replacement of copper wound Fan motor for exhaust Fan metal body 300mm sweep complete as per matching to existing type and gauge complete all as specified and as directed by Engineer- in Charge.

S&F in replacement of copper wound Fan motor for exhaust Fan metal body 450mm sweep complete as per matching to existing type and gauge complete all as specified and as directed by Engineer- in Charge.

S&F in replacement of copper wound Fan motor for ventilating fan PVC body any sweep with front lock & capacitor complete as per matching to existing type and gauge complete all as specified and as directed by Engineer- in Charge.

Supply only Fan blade for ceiling fan 1200/1400 mm sweep as per matching to existing complete all as specified and as directed by Engineer- in Charge.

Supply only Fan blade for wall fan 300/400mm sweep as per matching to existing complete all as specified and as directed by Engineer- in Charge.

Supply only Fan blade for vantilating fan 200mm sweep as per matching existing complete all as specified and as directed by Engineer- in Charge.

Supply only Fan blade for Exhaust fan metal type any sweep as per matching existing complete all as specified and as directed by Engineer- in Charge.

Supply only clamp with rubber bush including nut/bolts, safety pin complete all as specified and as diretced by Engineer-in-charge.

Supply only in SS nut bolts with safety pin full thread 10/11 number for ceiling fan complete all as specified and as directed by Engineer-in-charge.

Supply only Bearing for ceiling fan/ exhaust fan/ wall fan complete all as specified and as directed by Engineer- in Charge.

Supply only hanging rod for ceiling fan 1200/1400 mm any height as per the site requirement complete all as specified and as directed by Engineer- in Charge.

Supply only Fan condenser of any capacity 0.80/1.25/1.5/2.5 mfd, complete all as specified and as directed by Engr-in-Charge.

Supply only Fan condenser of any capacity 3.15/4.0/6.0 mfd, complete all as specified and as directed by Engr-in-Charge.

Attending complaints related to internal electrification including replacement & minor repairs like reconnections, replacement of screw/washers any type & size, insulation tape replacement etc and obtaining completion of user on complaint slip, complete all as specified and as directed by engineer-in-charge. Contractor shall attend the complaints on requirement bases from 0830 to 1730 hours on working days including on non-working day also if required for that contractor shall deploy at least 02 Electrician with 02 No helper at complaint Cell AGE E/M Palam for Day to day on all working day.The cost of said electricians and helpers, sationery required at complaint cell, minor spares like screws, washer, insulation tape, nut, bolts, pvc rawl plugs/gitti etc and T&P shall be included in cost of attending complaints under this item and No extra payment on this accound shall be given to the contractor.

Supply only switch Modular one module one way 10 Amp complete all as specified and as directed by Engineer-in-charge.

Supply only bell switch Modular one module complete all as specified and as directed by Engineer-in-charge.

Supply only switch Modular one module two way 10 Amp complete all as specified and as directed by Engineer-in-charge.

Supply only switch Modular one module one way 16 Amp complete all as specified and as directed by Engineer-in-charge.

Supply only Modular type socket outlet shuttered two module 5 pin 6 amps multipurpose complete all as specified and directed by Engineer-in-charge.

Supply only Modular type socket outlet shuttered two module 16 amps multipurpose complete all as specified and directed by Engineer-in-charge.

Supply only Modular Electronic Fan regulator stepped type, 5 steps, 02 module complete all as specified and as directed by Engineer-in-charge.

Supply only switch Piono type one way 05/06 Amp complete all as specified and as directed by Engineer-in-charge.

Supply only switch Piono type two way 05/06 Amp complete all as specified and as directed by Engineer-in-charge.

Supply only switch Piono type one way 15/16 Amp complete all as specified and as directed by Engineer-in-charge.

Supply only switch Piono type socket outlet 3/5 pin 5/6 amps multipurpose complete all as specified and directed by Engineer-in-charge.

Supply only switch Piono type socket outlet 15/16 amps multipurpose complete all as specified and directed by Engineer-in-charge.

Supply only Piono type Electronic Fan regulator stepped type complete all as specified and as directed by Engineer-in-charge.

Supply only door bell, ding-dong or multimusical type AC 230Volts complete all as specified and as diercted by Engineer-in charge.

Supply only 3 Pin plug top 16 Amps complete all as specified and as diercted by Engineer-in charge.

Supply only 3 Pin plug top 6 Amps complete all as specified and as diercted by Engineer-in charge.

Supply only ceiling Rose surface bakelite 3 terminal complete all as specified and as diercted by Engineer-in charge.

Supply only PVC Casing capping 20/25mm ISI marked all as specified and as directed by Engineer-in-charge.

Supply only modular white cover plate with frame 1/2/3 module as required at site complete all as specified and as directed.

Supply only modular white cover plate with frame 6 or 8 module as required at site complete all as specified and as directed.

Supply only modular white cover plate with frame 10/12 module as required at site complete all as specified and as directed.

Supply only in replacement of GI / PVC box for fixing of modular fixtures of 1/2/3 module as required at site complete all as specified and as directed by Engineer-in-charge.

Supply only in replacement of GI / PVC box for fixing of modular fixtures of 6 or 8 module as required at site complete all as specified and as directed by Engineer-in-charge.

Supply only in replacement of GI/ PVC box for fixing of modular fixtures of 10 or 12 module as required at site complete all as specified and as directed by Engineer-in-charge.

Supply only Cable PVC insulated unsheathed single core 1100V FR-LSH grade stranded flexible copper conductor of size 1.5 sqmm, complete all as specified and as directed by Engr-in-Charge.

Supply only Cable PVC insulated unsheathed single core 1100V FR-LSH grade stranded flexible copper conductor of size 2.5 sqmm, complete all as specified and as directed by Engr-in-Charge.

Supply only Cable PVC insulated unsheathed single core 1100V FR-LSH grade stranded flexible copper conductor of size 4.0 sqmm, complete all as specified and as directed by Engr-in-Charge.

Supply only Cable PVC insulated unsheathed single core 1100V FR-LSH grade stranded flexible copper conductor of size 6.0 sqmm, complete all as specified and as directed by Engr-in-Charge.

Supply only Cable PVC insulated unsheathed single core 1100V FR-LSH grade stranded flexible copper conductor of size 10.0 sqmm, complete all as specified and as directed by Engr-in-Charge.

Supply only Cable PVC insulated unsheathed three core 1100V HRFR grade stranded flexible copper conductor of size 2.5 sqmm, complete all as specified and as directed by Engr-in-Charge.

Supply only MCB, 6-32 Amps, SP, 230 Volts, 10 KA complete all as specified and as directed by Engr-in-Charge.

Supply only MCB, 40 Amps, SP, 230 Volts, 10 KA complete all as specified and as directed by Engr-in-Charge.

Supply only MCB, 40 Amps, SPN, 230 Volts, 10 KA complete all as specified and as directed by Engr-in-Charge.

Supply only MCB, 63 Amps, SPN, 230 Volts, 10 KA complete all as specified and as directed by Engr-in-Charge.

Supply only MCB, 63 Amps, TP, 415 Volts, 10 KA complete all as specified and as directed by Engr-in-Charge.

Supply only MCB, 63 Amps, TPN, 415 Volts, 10 KA complete all as specified and as directed by Engr-in-Charge.

Supply only Fan condenser of any capacity 1.5/2.5/3.15 mfd, complete all as specified and as directed by Engr-in-Charge.

Supply only 3 pin Plug top of 20 Amps for sheet metal enclosure power socket 240V 50 HZ, complete all as specified and as directed by Engr-in-Charge.

Supply only socket outlet of 20 Amps for sheet metal enclosure power socket 240V 50 HZ, complete all as specified and as directed by Engr-in-Charge.

Notes:- (a) The amount of Rs. 141943/- against Schedule of Credit on Page No. 109 shall be deducted from the total amount quoted against Sch 'A' while deriving the Contract Sum for Acceptance. (b) Complaints shall be attended within 48 Hrs, any delay without any justified reasons, penalty of Rs 100/- per day per complaint shall be recovered from contractor's dues.

kailash chawla

SM CONSTRUCTION COMPANY

M/S SURINDERAS CONSTRUCTION CO.

M/s Adhikari construction co.

PARKASH ENTERPRISES

H.B. Traders

M/S Satyam Associates