REPAIR / MAINT OF BOUNDARY WALL, CHAINLINK FENCING, CHEQUARED TILES, DRAIN, MANHOLE, CLEANING OF SEPTIK TANK/SOAKAGE WELL AND REPAIR OF DRAIN FOOTHPATH AND OTHER MISC B/R WORK UNDER AGE B/R-I AT GE (AF) BAMRAULI

Amount

Cleaninig of septic tank and raw sewage by mechanically od Manually of any size by taking out Mud/Sludge from septice tanks of any depth including dewatering in foul conditions and confined places, getting out and removing the sludge to a distance exc 250m and n exc 500m and depostited where directed in excavated bprrow pit and including excavation of borrow pits and covering the borrow pits with 10cms thick layer of soil including spreading of bleaching powder before and after covering the borrow pit with soil to maintain hyzenic enviroment complete all as specified and directed

All as per item No.1 above but from manhole of depth n exc 1.5 mtr complete all as specified and directed.

All as per item No.1 above but manhole of depth exc 1.5 mtr but n.exc 3.0 m complete all as specified and directed

Cleaning or blockage manually by rodding pumping etc and removing the deposited sludge/sold/liquid material and removing to out side MOD land completed all as directed from water closet ( IWC/EWC) trap & CI pipe line upto first manhole

Cleaning & removing all scale & dirt, etc., from tanks of capacity exc 250 ltrs and n exc 500 ltrs & from mouths of circulating pipes, etc .

Cleaning & removing all scale & dirt, etc., from tanks of capacity exc 500 ltrs and n exc 1000 ltrs & from mouths of circulating pipes, etc.

Cleaning of underground sewage line of any dia including manholes of any description and any depth by removing any type of blockage including de sitiling and de chocking manually by providing rodding and flushing with water cleaning including cleaning of manhole by removing sludge site solidf etc and refixing all as directed and full sartisfaction of Engineer-in-charge.

Demolition of brick work or stone/boulder masonry built in cement mortar incl all quoins, arches, pillars etc but excluding ashlars facings dressed stone work and forecast concrete articles, complete all as sfd and directed.

Taking down cement plaster on brick or stone walls, etc, incl raking out joints, hacking for key, scrubbing down with water, etc & prepare to receive new plaster complete all as specified and directed

M&L for brickwork with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6, complete all as specified and directed.

M&L for rendering 15mm thick cement plaster on fair face of brick work or concrete surface, masonry surfaces other in cement mortar 1:4 finished complete all as specified.

M&L for preparation of new plastered surface cement base paint two coat for new plaster surface over one coat primer of wall complete all as specified and directed.

M&L for preparation of old decorated plastered or unplastered wall surfaces and applying one coat of cement base paint on wall surfaces

M&L for preparation of old plaster surface of wall applying one coats of Appx exterior emulsion paint (Asian paint) on wall surfaces complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cmcomplete all as specified

S&F in repair angle iron post and struts in fencing incl cutting tops to shape as directed drilling holes, notching for wire etc flat iron fillets (for securing wire mesh etc incl all necessary drilling , bolting or riveting etc and similar work confirming to FE 290 Gde E-165.

M&L for PCC 1:2:4 type B-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as directed.(Fixing pole)

M&L for preparation of new surfaces of steel of any description over 10cm grith or width, not otherwise described with one coat of red oxide followed by two coats of synthetic enamel paint all as specified and directed.

M&L for preparation of old surfaces of steel of any description over 10cm grith or width, not otherwise described with one coat of red oxide followed by two coats of synthetic enamel paint all as specified and directed.

S&F in repair Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strainging bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or stel pins, etc. complete all as specified and directed (each line wire to be measured).

S&F in repair for concertina coil 600 mm dia ( in streched portion ) hot dip galvanised steel wire coated with CRL anti corrosive paint making diamond shape with the help of dove tail clip ( 18 SWF) fixed over razor wire wire with angle iron. The concertina coil is to be fixed with razor wire at point wherever coil touches the bottom of razor wire with the help of hog rings ( 14 SWG) complete all as specified and directed

S&F in repair 4mm dia GI steel wire,PVC coated,75mmx75mm mesh,as in chain link fencing incl straining and fixing to posts and to straining bolts incl securing with and provision of galvanised iron,PVC coated,tying wire complete

Dismantling of asbestos cement (corrugated, semicorrugated , etc) sheet in roof covering complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering or fixed to wall with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ wall cladding fixed with self tapping screws complete all as specified directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15cm thickness (below and above ground level) and removing the unserviceable materials to a distance not exceeding 100m all as specified and as directed.

M&L for 100MM thick Cement concrete 1:5:10 type E-2 (using 40mm graded stone aggregate) as in mass-concrete/foundation or floor complete all as specified and directed

M&L for chequered cement concrete with tiles of size 20cm x20cm x 25 mm and 15mm thick screed bed in CM 1:6 set jointed and pointed in neat cement slurry and pointed with coloured cement to match.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness M-40 grade laid over including 25mm thick sand cushioning including filling of joints with sand with grey cement pigment complete all as specified and directed.

S&F in repair Ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gms) of bore of pipe 15mm complete all as specified and as directed.

S&F in repair 15 mm bore galvanised steel water tubing 'medium grade' with all fittings and fixed to walls, ceiling or laid in floors etc. complete all as specified and directed.

S& F in repair 20 mm bore galvanised steel water tubing 'medium grade' with all fittings and fixed to walls, ceiling or laid in floors etc. complete all as specified and directed.

M&L for 75mm thick for PCC 1:3:6 type C-1 as in plinth protection , complete all as specified and directed

S&F in repair One piece Vitreous china wash down water closet (Pedestal Pattern) size 645mmx35mmx730mm 'white' with soft close seat cover & twin flush fittings, toilet paper holder, health faucet, PVC connection, angular stop cock (valve) (2 Nos) with flange etc all as specified in Particular specifications. Note : Vitreous china wash down water closet (Pedestal Pattern) cat Part No. CURATOR S1013132 S trap 250mm of 'Cera' or equivalent model of make specified in Appendix 'B' to particular specifications.

S&F in repair vitreous china wall hung wash hand basin with pedestal snow white miniumum size 630mmx450mm including chromium plated brass coupling, bottle trap, chromium plated brass centre hole basin mixer, 450 mm PVC braided connection (two numbers), angular stop cock ( valve) (two numbers) complete all as specified in particular specifications. Note : Vitreous china wall hung wash hand basin cat Part No. CONCORD S2040112, Pedestal cat part No S2090107 & chromium plated brass centre hole basin mixer cat part No F2002461 of 'Cera' or equivalent model of make specified in Appendix 'B' to particular specifications.

S&F in repair 600mmx450mm and 6mm thick bevelled edge looking mirror fancy type mounted on 6mm thick backing comercial plywood fixed with CP plug with chromium plated brass screws and cup washer fioxed on wall complete.

S&F in repairs plastic water closet sheet cover of any color closed pattern with flat bottom and cover and MS chroumium plated or aluminium hinges devices etc. Complete all as specified and directed.

S&F in repairs Vitreous china wash down water closet pan (pedestal pattern) white (excluding flushing cistern and flush pipe) and including fixing of the following components viz. pedestal pan with "P" or "S" trap, seat and cover for pedestal pan, flushing cistern, brackets, chain and pull or lever handle, flushing pipe including jointing to socket of flushing rim and connecting pipe to union of flushing cistern, inlet and overflow pipe, anti-syphonage pipe or stopper fixed as in repairs complete all as specified and as directed. Note:- Flushing cistern and flush pipe as required shall be measured and paid for under supply only separately.

S&F in repairs Vitreous china sqatting pan, "Orissa" pattern, size 580mm x 440mm white, with integral foot rests (excluding flushing cistern and flush pipe) and including fixing of the following components viz. squatt pattern pan with loose cast iron or vitreous chinaware, "P" or "S" trap, seat, flushing cistern, brackets, chain and pull or lever handle, flushing pipe including jointing to socket of flushingrim and connecting pipe to union of flushing cistern, inlet and overflow pipe, anti-syphonage pipe or stopper, setting the trap in and pan in lime concrete, 150mm minimum thickness and finished just below level of rim of pan to receive floor finishing fixed as in repairs complete all as specified and as directed. Note:- Flushing cistern and flush pipe as required shall be measured and paid for under supply only separately.

S&F in repair Vitreous China Urinal, full stall type, white (including flushing cistern, flush pipe and waste pipe complete all as specified in particular specifications.

S&F in repair HEALTH FAUCET (ABS body) mild steel chrominium plated suitable for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making fixed in position complete all as specified and directed. as in repairs complete all as specified and as directed.

S&F in repairs PVC valve less, syphonic action type, white low level flushing cistern of capacity 10 litre with inlet ball valve float and handle including brackets and 32 mm dia PVC flush pipe complete all as specified and directed

S&F in repairs 600mm long between flanges brass chromium plated towel rack with brackets fixed to wall with chromium plated brass screws complete all as specified in particular specifications. Note :- (i) Towel rack cat part No F5002101 of Cera or equivalent model of make as specified in Appendix 'B' to Particular specifications as in repairs complete all as specified and as directed.

S&F in repair grating doom 100mm dia of CP (Minimum weight 60 Gms) complete all as specified and directed

S&F in repair Stop valves, fancy type, chromium plated with long shank and cup (concealed type) cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of bore of pipe 15mm as in repairs complete all as specified and as directed.

S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm as in repairs complete all as specified and as directed.

S&F in repair 15 mm Bib tap long body with wall flange fancy type chromium plated brass screwd for iron pipe with capstain head complete all as specified and directed

S&F in repair Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe of bore of pipe 15mm fixed all as specified and as directed.

S&F in repair 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F in repair of 110 mm dia(SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed

S&F in repair single hole brass CP Ball mixer cock 15mm dia complete all as speicifed and directed

S&F in repair CP brass hot and cold mixer with legs non telephonic fixed in wall for bathroom complete all as specified and directed

S&F in repairs vitreous china wash hand basin, flat back of size 550x400 mm etc complete all as specified and directed.

S&F in repair toilet cabinet PVC with mirror and shelves (600x450) etc complete all as specified and directed

S&F in repair CP fancy type towel ring complete all as specified and directed.

S&F in repair CP vitreous china soap dish fancy type complete all as specifed and directed.

S&F in repair 600mm long fancy type towel rail with brackets etc complete all as specified and directed.

S&F in repair CP brass hand shower with flexible pipe & connection complete all as specifed and directed.

S&F in repair fancy type glass corner shelf with CP brackets etc complete all as specifed and directed.

S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 120mm (minimum) wide with chromium plated brass bracket guard and railing 600mm long complete.

M&L for Solid PVC Frame for door,kitchen cabinet,cupboard of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style)both side prelam pvc sheet of decortive choice consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.complete all as specified and directed.

Dismantling of floor,hearth or wall tiling includinguding cement mortar bedding but not backing and rubbish off the premises.

M&L for non-skid Heavy duty endura tile 300x300x10-12mm thick coloured joint free in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed in cement mortar 1:4 complete all as specified and directed.

M&L for Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in floor etc set and jointed in neat cement slurry and pointed in white as coloured cement to match over and including 15mm thick screed bed in cement mortor (1:6) complete all as specified and directed

M&L for Non skid ceramic jointless coloured tiles 7 to 8mm thick (square/ rectangular) area of each tiles exceeding 0.06 sqm but not exc 0.09 sqm, in floors etc. set and jointed in neat cement slurry and pointed with white as coloured cement to match over and including 15mm thick screed bed in cement mortor (1:6) complete all as specified and directed.

M&L for glazed ceramic tiles in vertical surfaces of size 450x350x7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including rendering 10 mm thick in cement mortor (1:4) on vertical surface as in backing coat all as specified and directed.

M&L for 75 mm thick type D-2 1:4:8 (using 20mm graded stone agg) as in sub base. complete all as specified and directed.

M&L for 60mm thick rubber moulded glosy finished inter locking paver block with grey cement and pigment of any type and shape the minium compressive strenth noy less then 350 kg/sqcm as approved complete all as specified . complete all as specified and directed.

M&L for 25 mm Sand filling under floor including watering and consolidation. complete all as specified and directed.

M&L for PCC 1:2:4 Type B1using 20mm graded aggregate as in kerb stone in sides of inerlocking tiles including slightly rounded or chamfered angles and throating as complete all as specified and directed.

M&L for 25mm thick Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate)

M&l for Rendering 15mm thick cement plaster on brick masonry surfaces in cement mortar 1:4 finished to even & smooth surfaces (without using extra cement) including mixing of integral water proofing compound in the proportion as mentioned in manufacturer's instructions, complete all as specified.

M&L for Preparation of old painted surfaces of steel materials of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enammel paint with spray painting machine complete all as specified and directed.

M&L for preparation of old decorated concrete/bricks/stone or plastered surface of any description of 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

Dismantling wrought iron work of any description not otherwise provided

M&L for welding in repair thickness of metal to be welded exc 6mm but nexc 9mm size of length exc 2.5 cm but n exc 5 cm in length

S&F Framed work such as grills, gratings framed & hung/sliding as gates, including pintle hinges, stop, hand made sliding bolts, etc., with ends of bar shoulder &/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks , drain cover & similar work conforming to Fe 290 GDE -E-165

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Confirming to Fe-410- W(GdeE-250) quality-B etc complete all as specified and directed.

S&F MS works as of angles or tees,fixed independently cut to shape drilled incl. bending and welding angles of grade 410-FE including Dismantling all as specified and directed

M&L for preparing new or previously untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

PCC 1:4:8 Type D2 using 40mm graded aggregate in foundations, filling and mass concrete

Demolition of reinforced cement concrete any description

M&L for pre-cast cement concrete type B-1 (1:2:4) (using 20mm graded aggregate) as in manhole cover slabs set in cement mortar 1:6 including necessary formwork complete all as specified and directed.

S&F mild steel TMT bars 10mm dia and over , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and as directed.

M&L for 35mm thick precast PCC louvers and jallies in 1:2:4, type B-0 (Using 12.5mm graded stone aggregate) incl suitable reinfocement, all moulding etc set in CM 1:4.

Excavation in trenches n. exc 1.5m wide and n exc 1.5m deep and getting out in hard/ dense soil.

M&L for 100mm thick Cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete all as specified.

Returning, filling in excavated approved earth in to trenches around pipe etc after laying of pipes and testing complete including watering and well ramming in 25cm layers.

Removing surplus spoil to a distance not exc 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified.

Demolition and breaking up drain pipes 100mm (SWG/AC/PVC/NP) or reinforced concrete) set in cement mortar complete all as specified and directed.

Demolition and breaking up drain pipes 150 mm dia salt glazed ware, (SWG/AC/PVC/NP) or reinforced concrete) set in cement mortar complete all as specified and directed.

Demolition and breaking up drain pipes 200mm dia salt glazed ware, (SWG/AC/PVC/NP) or reinforced concrete) set in cement mortar complete all as specified and directed.

S&F Salt glazed stone ware (SGSW) grade 'A' pipes 100mm bore laid and jointed on concrete bed complete. Including testing all as specified.

S&F Salt glazed stone ware (SGSW) grade 'A' pipes 150mm bore laid and jointed on concrete bed complete. Including testing all as specified.

S&F reinforced concrete pipes class NP2 150mm dia pipes laid in jointed complete with collars Including testing all as specified.

S&F reinforced concrete pipes class NP2 200mm dia pipes laid in jointed complete with collars Including testing all as specified.

M&L for concrete bed to drain pipe 100mm bore laid to falls including packing under & haunching against the sides of pipes after they are laid and tested, in cement concrete 1:3:6 type D-2 (using 40mm graded crushed stone aggregate). (UNSV Pipe through away Low laying area)

M&L for concrete bed to drain pipe 150mm bore laid to falls including packing under & haunching against the sides of pipes after they are laid and tested, in cement concrete 1:3:6 type D-2 (using 40mm graded crushed stone aggregate). (UNSV Pipe through away Low laying area)

M&L for concrete bed to drain pipe 200mm bore laid to falls including packing under & haunching against the sides of pipes after they are laid and tested, in cement concrete 1:3:6 type D-2 (using 40mm graded crushed stone aggregate). (UNSV Pipe through away Low laying area)

M&L for brickwork with subclass "B"bricks straight or curved on plan 'to any radius in half brick wall built in CM 1:4

M&L for cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in benching including weathering slightly rounded or chamfered angles including necessary form work and mixing of integral water proofing compound as per manufacturer's instructions complete all as directed (Water proofing compound shall be measured and paid separately).

S&F 75 mm bore PVC (SWR) bends any radius complete all as specified and directed

S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed

Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material

M.R. ENTERPRISES

Abhinav Builders

Bharat Trading Company

Mohit Enterprises

RK Enterprises