PROVN OF TOILET BLOCK IN ECSH POLYCLINIC AGRA

Amount

Surface excavation not exceeding 30 CM deep and averaging 15 CM deep and getting out in Soft/ Loose soil complete all as specified & as directed.

Removing excavated material n. exc 50m and depositing where directed at a level n. exc 1.50 in soils complete all as specified & as directed.

M&L excavation in trenches n. exc 1.5m wide and 1.5m deep getting out in soft/loose soil as in foundation complete all as specified & as directed.

M&L for PCC 1:4:8, type D2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified & as directed.

M&L brick work with sub class 'B', old size bricks straight or curved on plan, exc 6m mean radius, built in cm (1:6) complete all as specified & as directed.

M&L brick work with sub class 'B', old size bricks straight or curved on plan, exc 6m mean radius, built in cm (1:6) in half brick complete all as specified & as directed.

Returning, filling in trenches in layers n. exc 25cm thick, watering, well ramming complete in soft/loose soil complete all as specified & as directed.

Use & waste of formwork to sides and soffits of floor or roof beams, lintels, cantilevers, shelves etc complete all as specified and directed.

Use & waste of form work to soffits of suspended slab/chajja not exc 200mm thick rough finished surface of concrete etc etc complete all as specified & as directed.

Use & waste of form work to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide, rough finished, complete all as specified & as directed.

S&F mild steel TMT bars 10mm dia and over cut to length bent to shape required, including cranking, bending, spirally for hooping for columns hooking ends and binding with mild steel wire anealed not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F mild steel TMT bars 6 to 8mm 10 mm dia cut to length bent to shape required, including cranking, bending, spirally for stirrups and binding with mild steel wire anealed not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for reinforced cement concrete M-25 design mix as in Beams, cantilevers, bressummers,lintels over 1.5m span etc complete all as specified & as directed.

M&L for reinforced cement concrete M25 design mix as in Slabs supported on walls, beams and columns in floors,roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified & as directed.

M&L for 15mm thick rendering in CM 1:4 on brick or concrete surface with water proofing compound @ 3% by weight of cement finished even & smooth complete all as specified and directed. Note : Water proofing compound will be measured and paid seperately under respective item of Sch ‘A’.

M&L for rendering 5 mm thick in CM 1:3 on ceiling surface concrete surfaces finished fair & even complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:6 on any faces of brick or concrete surfaces of walls & finishing the surface even and smooth complete all as specified and directed.

M&L coloured non skid ceramic tiles 7mm to 8mm thick (square/rectangular) area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 20mm thick screed but n. cm 1:6 complete all as specified and directed.

M&L for coloured glazed ceramic tiles (Digital & designer Pattern) in vertical surface 350 x 250 x 7 mm / 450 x 350 x 7mm thick or suitable size duly approved by GE set and jointed in neat cement slurry and pointed in white or colour cement to match tiles including 10mm thick rendering in CM 1:3 on brick wall complete all as specified and as directed .

M&L for PCC type D2 (1:4:8) ( 40mm graded stone agg) 75mm thick as in sub base etc complete all as specified and directed.

M&L hard core with broken bricks n. exc 63mm depostied spread and levelled in layers n. exc 15cm thick complete all as specified and directed.

M&L for Cement concrete (1:3:6) type C-2 using 40 mm graded stone aggregate as in plinth protection, 50 mm thick, surfaces finished even and fair without using extra cement as in plinth protection including provision of construction joints complete all as specified and directed by Engr-in-Charge.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification & drawing

S&F Factory made solid PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rail MS frame shall be covered with heat moulded plain / coloured PVC "C"channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the style & rail with suitable PVC sheet beading and jointed togeather with solvent cement all as specified.

S&F 125mm long aluminium handles, cast type anodised fixed to doors complete all as specified and directed.

S&F 100mm long aluminium hinges,extruded aluminium alloy with galvanised mild steel hinge pin, anodised fixed to doors complete all as specified and directed.

S&F 150mm long aluminium anodised barrel tower bolts and fixed complete all as specified.

S&F steel ventilator top hung shutter including higes steel peg stay complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc 0.50 sqm in each pan etc complete all as specified and directed.

S&F 0.56mm nominal dia of wire and 1.18mm average width of aperture mild steel galvanised wire cloth etc complete all as specified and directed.

Supply only intergral water proofing complete all as specified & as directed.

S&F 100 mm cast iron soil waste and vent pipe in any length with or without ears laid in floor./trenches

All as per above item here in before but 75mm sand cast iron pipe with or with out ears,with cement joints laid in trenches/walls.

S&F 100 mm cast iron bend

S&F 100 mm cast iron door bend with access door reducer for connecting pipes complete all as specified.

S&F branch pieces single 100mm dia (equal or unequal) ordinary or inverted.

S&F 75 mm CI nahani trap , with grating inl jointing to waste pipe fixed in cement concrete type B1 (1:2:4).

S&F 100 mm CI floor trap , with grating include. jointing to waste pipe fixed in cement concrete type B1 (1:2:4).

M&L Salt-glazed stoneware gully traps 150/100 mm, setting and jointing with solvent cement with outlet pipes and PCC 1:2:4 filling around trap and 25mm thick coverslab (size as directed by EIC) complete all as specified.

S&F 75 mm dia cast iron cowl's

S&F Vitreous china squatting pan, Orissa pattern, size 580x440mm white/ coloured with integral foot rests including flus pipe and connection to trap, and to flushing pipe, anti-syphonage pipe, etc. fixed complete all as specified.

S&F PVC 10 ltr. Capcity valveless syphonic action type, flushing cistern, low level, white/ coloured with inlet, ball valve, float and handle including brackets and connection to pipe etc with all neccassary fittings complete all as specified directed.

S&F in 15 mm size PVC connections with PTMT nuts of 450 mm long complete all as specified.

S&F Vitreous china Urinal, bowl type, coloured ,flush pipe and waste pipe including providing and fixing plugs, bedding urinal against wall in cm 1:2 securing urinal to plugs fixing with brackets,flush pipe,grating and union for 32mm dia PVC pipe discharge pipe connection to drain etc. complete all as specified and directed

S&F Wash hand basin flat back 550x400mm vitreous chine (white) with cantilever brackets embedded in concrete block including the fiollowing , complete all as specified (a) Brass chromium plated waste coupling 32mm bore size (b) Waste pipe PVC 32mm bore (c) Angle iron/cast iron brackets (d) CP Fancy type pillar cock 15 mm dia

M&L Soap shelf, PVC white/colour appx size 450 x 125 x 40mm (as per sample), complete all as specified and directed. Make: Prayag or equivalent

S&F Bib taps,CP, fancy type screwed for 15mm bore of iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F Stop valves, fancy type, CP with long shank and cup ( concealed typee ), screwed both ends for 15mm bore of iron pipe or for union and fixed, complete all as specified and directed.

S&F Stop valves, cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for 15mm bore of iron pipe or for union and fixed complete all as specified and directed.

S&F Stop valves, cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for 20mm bore of iron pipe or for union and fixed complete all as specified and directed.

S&F towel rail CP 20mm dia D-type 60 cm long between flanges and fixed in position complete all as specified and directed.

S&F 450mm long MS powder coated peg set of 5 or 6 complete all as specified & directed

S&F 15mm bore steel water tubing, medium grade, galvanized including fittings and fixed to walls, ceilings, floors or laid in floors complete all as specified and directed.

S&F 20mm bore steel water tubing medium grade galvanized including fittings and fixed to walls, ceilings, floors or laid in floors complete all as specified and directed.

S&F 500 ltrs capcity rotational moulded polythene water storage tank, tripple layer ( cylindrical vertical with closed top) hoinsted and fixed in position complete all as specified and directed.

M&L Preparing new plastered surfaces and applying two coats of white wash on soffits/ceilings etc; complete all as specified or as directed.

M&L two coats of cement base paint over one coat of colour wash on walls including preparation of surfaces complete all as specified or as directed.

M&L of newly plastered surfaces of walls etc., and applying two coats of dry distamper including one coat of chalk whiting complete all as specified and directed

Preparation of new steel primed surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified

Machine pressed precast cement concrete interlocking paver block any shape and size confirming to IS-15658-2006 of 60mm thickness M-35 Grade with grey cement and no pigment jointed in neat cement slurry and pointed in cement mixed with pigment to match the shade of paver block including 20mm thick layer of screed bed in cm 1:4 over 75mm thick PCC 1:4:8 (40mm graded stone aggregate), complete all as specified.

M&L for salt glazed stoneware drain pipe conforming to IS 651-1972 grade "A‟ laid in trenches and jointed in cement mortar (1:1) for 150 mm internal diameter of pipes complete all as specified and directed.

M&L for concrete bed to drain pipes in cement concrete (1:4:8) type D- 2 (using 40 mm graded crushed stone aggregate) including packing under and completely surrounding of pipes with concrete after they are laid, jointed and tested for 150 mm bore of pipe complete all as specified and directed.

PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate as in benching for manholes, bands , coping , bed plate etc with slightly chamfered or rounded angles including necessary form work, if any, and finishing exposed surface even and smooth without using extra cement complete all as specified and directed.

Extra for forming fair finish to drain or channel 30cm internal girth in cement concrete using extra cement inl. forms moulds/mitred stopped ends etc complete all as specified and directed.

M & L Precast RCC 1:2:4 type B1 using 20mm graded crushed stone agg as in manhole cover slabs, of any thickness, size or shape incldg necessary form work, finished concrete surfaces fair & even in CM complete all as specified and directed.

Cutting into existing manholes for connecting new drains, making good to pipe and ren-dering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement con-crete 1:2:4 type B-1 smooth finished, and reforming bench-ing as required (Internal Dia of pipe in 150mm) complete all as specified and directed.

M&L for Point wiring in concealed conduit with 1.5 Sqmm PVC insulated flame retardent low smoke(FRLS) single core stranded copper conductor for one light/fan/bell point in and including PVC conduit 19/20 mm dia to be terminated in pressed steel terminal boxes with 3 mm thick bakelite sheet top cover including 1.5 sqmm PVC insulated "Flame Retardent Low Smoke"( FRLS)" single core stranded copper earth continuity conductor controlled by one switch and/or one regulator complete all as specified and directed. (Wiring shall be made as per colour code in IS for Phase, neutral and earth)

All as per Item No. 144 above but one socket outlet 5/6 Amps on independent board controlled by one switch.

All as per Item No. 144 above but one socket outlet 5/6 Amps controlled by one switch on same board with other switches

All as per Item No. 144 above but one socket out let 15/16 Amps controlled by one switch on independent board and wiring with 2.5sqmm cable.

S&F switch piano flush type single pole , 5/6 Amps one way, 230 volts, complete all as specified & directed. Make: Anchor Cat No.38058 or equivalent as approved by GE.

S&F switch piano flush type single pole , 15/16 Amps one way, 230 volts, complete all as specified & directed. Make: Anchor Cat No.39991 or equivalent as approved by GE

S& F socket outlet 5/6 Amps flush type piano 5 pin 230 volts complete all as specified & directed. Make: Anchor Cat No.38320 or equivalent as approved by GE.

S&F ocket outlet, multi-purpose 3 pin 5/6 Amps and 3 pin 15/16 Amps complete all as specified and directed. Make: Anchor Cat No.39994 or equivalent as approved by GE.

S&F ceiling rose surface bakelite 62.5 x 25 mm size 3 terminals complete all as specified & directed. Make -Anchor CAT Part No-39072 or equivalent as approved by GE.

S&F lamp holder , insulated body ,with back plate suitable for batten fitting complete all as specified and directed. Make: Anchor Cat No. 39797/ 39800 or equivalent as approved by GE.

S&F LED Bulb 15 watt, single phase, 230 Volts AC supply suitable for lamp holder complete all as specified and directed. Make :- Havells cat part No-LHLDDEEEML8R015 or equivalent Model of Philips/Bajaj/CG/ Wipro as approved by GE.

Supply & fix surface/wall mounting LED batten 20 watt luminaire having extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver with mounting accessories complete with lamp holders fixed to wall/ ceiling with fixing accessories and connecting up with & including twin twisted copper flexible wire of size 0.75 sqmm from ceiling rose to fittings complete all as specified & directed. Make:- Havells cat part No-ENDURALINEARNEOBS20WLED865SPCWH or equivalent Model of Philips/Bajaj/CG as approved by GE.

Supply & fix, outdoor security light LED 36/40 watt luminaire IP 65/66 protection polyster powder coated with pressure die cast aluminium housing and robust construction with reflector cover pre anodised and flat white high transmission acrylic cover or toughened glass, natural white type with electronic driver, connector block etc with internally prewired fixed to building with and including 1.20M long bracket made out of 40mm dia light grade GI pipe bent to shape & providing clamps 2 Nos made out of 50 x 6 mm Flat iron/MS clamps & 12mm dia bolts, nuts & washers etc and connecting up with & including twin twisted copper flexible wire from ceiling rose to fittings complete all as specified & directed. Make:- Havells cat part No- ENDURAPEARLNEOSL40WLED757PASYTOPC,Phillips cat part No. BRP052 LED 036 CW HP SLA FG S1 PSU GR or equivalent as approved by GE.

Supply and fix Distribution board, sheet metal enclosure factory fabricated double door SPN 4 way with 200 amps rated copper bus bar 240 volts IP-43, IK-09 with metal doors complete all as specified and directed. Make:- Legrand Cat Part No. 5076 10 or equivalent model of make Siemens/ Schneider as approved by GE.

Supply and fixing MCB SPN, 32 Amps, 'C' curve, 240 volts, 50Hz, 10kA IP-20 as per IS/IEC 60898-1 2002 ISI marked complete all as specified and directed. Make:- Legrand CAT No. 4086 17 or equivalent model of make ABB/ L&T/ Schneider as approved by GE.

Supply & fix MCB SP, 6 to 32 Amps, 'C' curve, 240 volts, 50Hz, 10kA IP-20 as per IS/IEC 60898-1 2002 ISI marked complete all as specified & directed. Make:- Legrand CAT No. 4085 87 to 4085 95 or equivalent model of make Siemens/ Schneider as approved by GE.

M & L earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm size, buried directly in ground (earth pit not less than 2.25 M deep below normal ground level) with top edge of the plate not less than 1.5 M below normal ground level connected to and including galvanised steel earth lead wire of 4 mm dia, including 15 mm bore GI light grade protection pipe upto 1 Mtr above the floor level of the buildings where main switch, DB etc, situated, earth lead wire connected to the earth plate by means of GI bolts, nuts, washers and earth plate surrounded by 150 mm thick alternate layers of charcoal or cock dust mixed with common salt 20 mm bore medium grade GI watering pipe PCC pit in PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) cover of precast RCC 1:2:4 type B-1(using 20 mm graded stone aggregate) duly reinforced with 8 mm formed or twisted bars @ 100 mm c/c both ways, GI wire mesh, GI sheet funnel necessary excavation in soft/ Looose soil and deposited the surplus soil to a distance not exceeding 50 mtr away from starting point, all as per electrical plate no:5 of SSR part-1 .

Supply & Laying, testing ,cable XLPE insulated screened PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty) 1100 volt grade, with stranded aluminium conductor of size 10 Sqmm 2 core compele all as specified and as directed. Make :- Havells, Grandlay, Polycab, Finolex

Supplying and laying un-rainforced precast concrete cable cover LV type-I flat size 250 mm x 150 mm x 40 mm in trenches for protection of cable complete all as specified and directed.

M&L for sand cushioning dry fine for cable cushioning below and above the cable complete all as specified and directed.

Supply and fixing GI Pipe 40mm Light grade , for cable protection laid in trench under road or path or fixed on pole or wall with clamps with all fittings complete all as specified and as directed. Make :- TATA, Prakash (Surya), Jindal

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300 mm sweep with, blades, and frame and louvers, connected ceiling rose to fan connector complete all as specified and directed. Make:- Usha/ Bajaj/ Havells

Supply and fix gun metal gate valve with iron wheel head screwed both ends for iron pipe and fixed of sizes 20 mm bore complete all as specified and directed.

Material and labour for cutting the road for laying of pipe and make good the same with cement concrete work in pavement/hard standing using 400kg of cement per cubic meter complete all as specified and directed.

S&F 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe 20 mm dia (minimum weight - 210 gm) complete all as specified and directed.

Material and labour for Drilling and tapping cast iron water mains (in position) for branch connections of the internal 20 mm dia complete all as specified and directed.

M&L for Straight plain brass ferrules (or connecting screws) screwed both ends and fixed suitable for 20mm dia pipe, complete all as specified and directed.

deva engineers

Balaji Associates

saroj constructions

Messars Maa Devi Construction Co.

Allied Builders

J P CONTRACTORS AND SUPPLIERS