REPAIR/REPLACEMENT OF WORNOUT INTERNAL ELECTRIC WIRING, FITTING AND FIXTURE IN JCO/ORS MD ACCN UNDER RRC AND 431(I) ASC AT FATEHGARH CANTT

Amount

Taking down copper/aluminium point wiring of any discrapation and any position (light, fan, socket or power point) complete, including fixture and fittings such as switches,socket, ceiling rose,lamp holder,pendants, bracket and regulator etc and removing material from site including making good disturbed surface to match with the existing surface complete all as specified and directed.

Taking down Aluminium sub main wiring and making good disturbed surfaces to match with the existing surface roof/wall/floor complete all as specified and as directed.

M&L for point wiring light/fan/exhaust fan point controlled by one switch with 1100 volt grade PVC insulated and unsheathed 1.5 Sq mm (FRLS) multistranded copper conductor cable with continuous earth wire of 1.5 Sq mm (FRLS) multistranded copper conductor cable PVC insulated and unsheathed, drawn in & including concealed PVC rigid conduit of suitable size medium grade with fittings (ISI marked) sunken pressed steel galvanised terminal boxes with top cover ISI marked plastic laminated hylam sheet for housing/ fixing switches etc complete all as specified and directed for the following- Note- (i) The quoted rete is deemed to be included for the chases cutting. (ii) Cutting chases for concealed shall be made good using CM 1:4 and surface finished to match the existing surface & colour.

…..ditto as above but for one 5 pin 5 Amp switch socket combination point on an independent board…ditto…..

…..ditto as above but for One 5 pin 5 Amp socket point controlled by one switch on same board.…..ditto…...

…..ditto as above but for One light point controlled by two 2-way switches…..ditto……

…..ditto as above but for one bell point controlled by one bell push switch …..ditto……

…..ditto as above but for one 15 Amp 6 Pin switch socket combination independent with 2.5 Sqmm FRLS unsheathed copper conductor single core multistranded …..ditto……

S&F switch piano flush type 5 Amp single pole one way complete all as specified and directed.

S&F switch piano flush type 5 Amp single pole two way complete all as specified and directed.

Fixing only switch piano flush type 5 Amp single pole one way obtain from taken down with point wiring complete all as specified and directed.

S&F switch socket combination 2 in 1 flush type 5 Amp 5 Pin complete all as specified and directed.

Fixing only switch socket combination 2 in 1 flush type 5 Amp 5 Pin type obtain from taken down with point wiring complete all as specified and directed.

S&F switch socket combination 5 in 1, 15 Amp flush type complete all as specified and directed.

Fixing only switch socket combination 5 in 1, 15 Amp flush type obtain from taken down with point wiring complete all as specified and directed.

Supply and fixing bell push ac 230 volts complete all as specified and directed.

Supply and fix Call bell ding dong ac 230 volts complete all as specified and directed.

M & L lamp holder PVC/Polycarbonate type insulated body with back plate angle type for batten fittings incl LED lamp of 12W and colour temp 6500K suitable to fix in angle hoder complete all as specified & directed.

Supply and fix electronic fan regulator 5 stepped type complete all as specified and directed

Fixing only fan regulator allready taken down with point wiring including connection complete with all accessories complete all as specified and directed.

S&F ceiling rose PVC/Poly carbonate isolated body three terminal AC 230 volts complete all as specified and directed.

S&F in replacement metal clad plug & socket with metal plug top enclosure with a two pin and earth plug top and socket suitable for one single pole MCB 32 Amp complete all as specified and directed.

M&L for sub main wiring with two single core 6 Sqmm FRLS copper conductor PVC insulated and unsheathed cable including PVC conduit medium grade (appropriate size) concealed in wall for sub main connection including 6 Sqmm FRLS insulated multistranded unsheathed copper conductor used as a earth wire to common earth and connection to earth dolly all as specified. ( Note :- Two runs of 6 sqmm FRLS and one run of 6 sqmm FRLS copper conductor shall be measured as one unit length.)

Supply and fixing in replacement MCB distribution board SPN 240 Volt 8 way with 200 Amp rated bus bar having IP-43 protection and double metal door concealed in wall including connection with copper thimbles as required complete all as specified.

S&F in replacement of MCB SPN 40-63 Amp 240 volt 'C' curve complete all as specifed and directed.

S&F in replacement of MCB SP 6 to 32 Amp 240 Volt 'C' curve 10 KA complete all as specified and directed.

S&F surface and wall mounted 18/20W LED extruded aluminium batten fiitting provided for efficient heat dissipation complate all as specified and directed .

S&F LED T8 batten fitting 10W extruded aluminium batten fiitting complete all as specified and as directed.

S&F in replacement building security LED light 14 watt with IP-65 including suitable size of GI bracket complete all as specified and directed.

S&F LED wall light 12 W unbreakable poly carbonate suitable for mounting on wall /surface complete all as specified and directed.

Supply and fixing of VTPN DB suitable for Mounting MCCB as Incomer of rating 100 Amp Vertical distribution board 4 way with suitable rated bus bar having IP-43 protection and double metal door concealed in wall including MCCB 100 Amp, 16KA, 4 Pole complete electrical connection with aluminium thimbles as required complete all as specified.

Supply and fixing of VTPN DB suitable for Mounting MCCB as Incomer of rating 63 Amp Vertical distribution board 4 way with suitable rated bus bar having IP-43 protection and double metal door concealed in wall including TPN 63 Amp, 16KA, 4 Pole complete electrical connection with aluminium thimbles as required complete all as specified.

Disconnecting and taking down old existing UNSV tube light fitting of any description and in any postion including connection complete with all accessories complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick, burried directly into the ground (earth pit not less than 2.25 mtr below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to GI earth wire 4 mm dia by means of bolts, nuts, check nuts, and washers of galvanised iron or steel all as shown iln electrical plate No - 3 connected to earthing test point all as specified or indicated including excavation and connected earth work, PCC chamber and cover, watering pipe, funnel wire mesh but without earth lead protection pipe and test on completion after dismantling unserviceable erthing (above GL only) complete all as directed incl dismantling of exsisting earthing. (Note :- On testing after completion if desired earth resistence is not obtained, the earthing will be redone at no extra cost.)

S&F in replacement surface mounted LED down light 15 watt with durable aluminium body housing using Al heat sink & high brighness LED with diffuser to give glare free light all as specified and directed.

M/S J.B.AND SONS

S B ENTERPRISES

LARSEN AIR CONDITIONING & REFRIGERATION

M/s Rahul Kumar Agrawal

M/S BABA ENTERPRISES