Special Repairs to Bldg No P-6, P-53, P-201 and MES staff qtrs at MIRC under GE (South) Ahmednagar

Amount

Taiking down carefully existing bituminous felt including plaster or cement concrete of any thickness and cleaning of the surface of roof including flushing and junction parapets kerb walls PCC fillets benching etc with wire brushes and removing of the rubbish to a distance not exc 500 mtrs and depositing where directed at a level not exc 1.5 mtrs above the starting point complete all as specified.

Cement screed 10 mm thick in cement mortar (1:4) on concrete surface/roof surface using WPC @ 3% by weight of cement and finishing the surface even and smooth complete all as specified and directed. (WPC will be measured and paid for seperately under respective item).

Supply only integral water proofing compound ISI marked complete all as specified and directed.

Cleaning the newly plastered surfaces and applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sqm complete all as specified and directed.

APP polythene membrane minimum weight 3kg/sqm and minimum 3 mm thick reinforced with polyster non wooven fabric weight not less than 150 gms/sqm laid by forced application on primed surfaces using bituminious primer @ 0.30 litre/Sqm complete all as specified and directed.

Applying of two coats of aluminium paint over APP membrane laid over roof complete all as specified and directed.

Complete removal of existing treatment on plastered surfeces of walls, preparation of surfaces and applying two coats of Oil bound distemper over a layer of wall care putty finish finished with roller finish complete all as specified and directed

Complete removal of existing treatment from ceiling surfaces, preparation of surfaces and applying three coats of white wash complete all as specified and directed.

Preparation of old painted surfaces of wood and wood based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Dismantling of stone slab & tiles of any description in floor, laid, bedded & pointed in any mortar complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floor & paving n.exc. 15cm thick below or above ground level complete all as specified and directed.

Taking down chowkats or frames with shutters(without taking off shutters from the frames) n.exc 1.50 sqm each and removing from site and making good disturbed surface of walls in cement mortar (1:3) complete all as specified and directed.

75 mm thick plain cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate as in sub base finished rough to receive finishes complete all as specified and directed.

Wash hand basin vitreous China white , flat back of size 550 X 400 mm including pillar tap 15 mm dia CP, waste chain and plug and porcelain stopper , waste pipe, a pair of brackets,or errecting stand and PVC connection, fixed in repairs complete all as specified and directed.

Vitreous China white squatting pan, Orissa pattern of size 580 X 440 mm with integral foot rest set in cement concrete including flush pipe and connecting to trap / flushing cistern, fixed in repairs complete all as specified and directed.

10 ltr capacity PVC coloured flushing cistern high/low including ball valve, bracket inlet, outlet PVC pipe, fixed in repairs, complete all as specified and directed.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

15 mm bore GI tubing medium grade (ISI marked) complete with all fittings and fixed complete on walls and ceilings or laid in floors etc complete all as specified and directed.

20 mm bore GI tubing medium grade (ISI marked) complete with all fittings and fixed complete on walls and ceilings or laid in floors etc complete all as specified and directed .

Stop cock cast copper alloy, fancy type screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fix of size 15 mm bore, fixed in repairs complete all as specified and directed.

Tubular towel rail, brass chromium plated 20 mm dia `D' type, 60 cm long between flanges including a pair of brackets, fixed in repairs complete all as directed.

Bib tap 15 mm bore, CP cast copper alloy with crutch or butterfly handle screwed down for iron pipe or for brass ferrule, fixed in repairs complete all as directed.Make:- Cat part No MOR 1020 A (Orintal series) of MARC or equivalent in make PLUMBER, ESS-ESS

15 mm bore pillar tap, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe, fixed in repairs complete all as directed.Make:- Cat part No MOR 1010 (Orintal series) of MARC or equivalent in make PLUMBER, ESS-ESS

Grating doom 100 mm dia of PTMT (Minimum weight 25 gms) fixed in position complete all as directed.

Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with 2 mm thick 3D wood grain moulded PVC Sheet on the front Face & 2mm Plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing given in SSR complete all as specified and directed.

Factory made PVC solid, single door frame (chowkats) of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening all as specified in SSR part-II 2010 Section-8, clause 8B.3 complete all as specified and directed.

100 mm size butt hinges medium weight, cold rolled mild steel, and fixed complete all as directed.

150 mm size aluminium anodised, barrel tower bolts of extruded section and fixed complete all as directed.

150 mm size extruded aluminium alloy handles, fabricated type, anodised fixed complete all as directed.

Demolition of brick/ stone masonry built in cement or lime mortar complete all as specified and directed.

Dismantling of mangalore pattern or similar tiles in roofing, single layer complete all as specified and directed.

Dismantling battens for tiles, shingles etc, of any size including tilting fillets spaced exc 15 cm complete all as specified and directed.

Dismantling of plain/corrugated/translucent sheets of any gauge or any thickness complete all as specified and directed.

Dismantling asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

Dismantling of timber scantlings 40 Sq. cm and over in section, in any position as in framed work complete all as directed.

Second class hard-wood timber framed and fixed clean sawn as in scantlings (framed), fixed complete all as specified and directed.

All as per item No 39 here in before but except timber (using old retrieved timber).

0.50 mm galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach and washers, in roofs, walls etc. with grde of zinc coating 275 fixed with L-type or J type or cranked hook bolts in lieu of screws complete all as specified and directed.

0.63 mm plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed.

Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, colour and design as approved by GE complete all as directed.

All as per item No 43 here-in-before but plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridges, valley as approved by GE

False ceiling with Vinyle faced Arm-Gyp-FB, ceiling 600 x 600 x 9 mm thick with washable metallized polyster foil backing with Vinyle covered edges, supporting sections shall be of suitable size from same makes embossed on sections and level adjuster duly suspended by 2 mm dia GI wire fixed to roof at 600mm centre to centre as per manufacturere's instructions / specifications including taking down existing ceiling complete all as specified and directed. Make : Armstrong or equivalent in Saint Gobian / Lafarge

Mild steel work in tubular trusses / purlin / rafter including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161- 1979 grade St.-240 complete all as specified and directed.

Roof tiles mangalore pattern, interlocking at side joints laid dry etc complete all as specified and directed .

All as per item No 48 here-in-before but except tiles.

Ridge or hip tiles to suit Manglore pattern of roofing tiles, bedded and jointed in cement mortar 1:6, complete all as specified and directed.

Ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in cement mortar 1:6, complete all as specified and directed (except tiles).

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.

Second class hard wood weather boarding, clean sawn, plain, 20 mm thick or feather edged 15 mm to 20 mm thick and fixed with 30 mm laps complete all as specified and directed.

Fixing only old second class hard wood weather boarding, clean sawn, plain, 20 mm thick or feather edged 15 mm to 20 mm thick and fixed with 30 mm laps

2nd class hard wood clean sawn battens sectional area 5 sqcm but n exc 15 sqcm at 30 cm centre to centre complete all as specified and directed.

Fixing only 2nd class hard wood clean sawn battens sectional area 5 sqcm but n exc 15 sqcm at 30 cm centre to centre.

Plain cement concrete 1:3:6 type C2, using 20 mm graded stone aggregate as in coping and mud stops, on top of wall, manglore tile roof complete all as specified and directed.

Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.00 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

2nd class hard wood plain fillets. square, rectangular or triangular in section, clean sawn, se-cured with nails or brads sectional area exc 13 sqcm but not exc 25 sqcm, fixed complete all as specified and directed.

Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 1000 litres capacity, tripple layered, hoisted and fixed in position including 20 mm dia ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed to iron pipe and connected including dismantling of old tank and removing to store complete all as directed.

Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 500 litres capacity, tripple layered, hoisted and fixed in position including 20 mm dia ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed to iron pipe and connected including dismantling of old tank and removing to store complete all as directed.

Brickwork with fly ash bricks, straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed.

Taking down cement mortar plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.

Rendering 15 mm thick in CM 1:6 on fair faces of concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

Preparation of newly plastered surfaces of walls and applying two coats of cement based paint complete all as directed.

Preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a layer of wall care putty finish finished with roller finish complete all as specified and directed.

Preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic anamel paint over one coat of pink primer complete all as specified and diercted.

Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic anamel paint over one coat of red oxide primer complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Granite (ruby red coloure) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete, over including 20 mm thick screed base in cement morter 1:6 as in floors etc complete all as specified and directed.

GI wire netting 0.90 mm dia and 12mm mesh fixed to wall, ceiling, beams etc including all laps cutting and waste including making V groove in crack portion and filled with cement mortar 1:2, complete all as specified and directed .

Rendering 5 mm thick in CM 1:3 on concrete surfaces in ceiling, finished even and smooth without using extra cement complete all as specified and directed.

Preparation newly plastered surfaces of ceiling and applying two coats of OBD over a coat of primer including a layer of white putty complete all as specified and directed

Complete removal of existing treatment and applying two coats of oil bound distemper over a coat of primer on ceiling surfaces completet all as specified and directed.

Machine in cut kota stone flooring 20-25 mm thick (size of kota stone slab 22"x22") laid over and including 20 mm thick bedding layer CM 1:6 with pigments to match the shade of slab including cutting, rubbing and mirror finish polishing complete all as specified and directed.

All as per ser item No. 77 here-in-before but 18 to 20 mm thick kota stone on vertical surfaces such as in skiting /dado of size as required at site including10 mm thick backing coat of plaster in cm (1:4) complete all as directed.

Non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 sqm, as in floors etc. laid over and including 15 mm thick screed bed in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed.

Glazed ceramic tiles (plain or printed) of each tile of size 300 mm x 200 mm , 7 mm thick as on vertical surfaces like dado, skirting etc jointed in neat cement slurry and pointed in coloured cement laid over and including 10 mm cement plaster backing in CM 1:4 complete all as specified and directed.

Stainless steel sink with drainage board, made out of 1 mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union pipe overall size 915 mm x 460 mm with bowl size 410 mm x 330 mm x 160 mm making good the disturbed surfaces fix in repairs complete all as specified and directed.

Taking down chowkats or frames with shutters(without taking off shutters from the frames) exc 1.50 sqm but not exc 4 sqm each and removing from site and making good disturbed surface of walls in cement mortar (1:3) complete all as specified and directed.

Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges locks strike plate,hold fast etc complete as specified of size 125 mm x 60 mm x 1.25 mm thickness etc. complete all as specified and directed.

PCC 1:3:6 type C-0 using 12.50 mm graded stone aggregate for filling in door frames and hold fast etc. complete all as specified and directed.

35 mm thick second class hardwood, factory made , plain framed,panelled shutter with panel of 9 mm thick BWP plywood bonded with high quality phenol formal dehyde synthetic resin adhesive confirming to IS-710. the size of rails & style shall be as per IS -1003 (Part I) kiln seasoned as per IS -1141 & chemically pressure treated as per IS-401, fixed complete all as specified & directed

300 mm aluminium alloy andised sliding door bolt with haps and staple (bolt type) fixing lips o sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and directed.

Hacking out old, broken glass (any thickness ,size quality or description) from wooden / metal frames incl punching or drilling out old glazing pins/spring clips complete all as specified and directed.

Sheet glass, ordinary quality 3 mm thick fixed with oil putty, size of glass n.exc 0.50 sqm in each pane complete all as specified & directed.

All as per serial item No. 88 here-in-before but frosted glass

300 mm long mild steel, ordinary rat tail rod pattern helical door spring including roller and roller plate ,, fixed in repairs complete all as specified and directed.

Rendering 15 mm thick in cement mortar 1:4 mixed with water proofing compound, on brick or concrete surfaces, trowelled to even and smooth finish without using extra cement complete all as specified and directed. (WPC shall be measured and paid for separately umder respective item).

Gratings 150 mm size of PTMT (Min wt 100 gms) fixed complete all as specified and directed.

Demolition and braking up of 100 mm dia drain pipes (Salt glazed ware, AC or reincorced concrete) set in cement mortar complete all as directed.

Special treatment to sunken portion with 10 mm thick plaster in CM 1:4 with chemical Nafulfill SBR and apply two coats of Detachment DS on plastered surface and again rendering 10 mm thick in CM 1:4 mixed with puzz filled with mixture of cement, fine sand and nafulfill SBR and provide hole in the wall and fix 600 mm long 20 mm dia GI spout, floor area of WC upto 1.5 Sqm complete all as specified and directed.

Cutting out cracks to V section in existing roof or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand (1:1) by weight complete all as specified and directed.

PVC (HDPE) rain water pipes, 110 mm bore, single socketed in any length with rubber ring joints fixed to walls complete all as specified including fixing of pipe to wall with flat iron clamps of size 25 x 3mm, bolts washing, nuts etc as in repairs after taking down existing damaged CI rain water pipe complete all as specified and as directed

PVC (SWR) bends/tees of any radius for 110mm bore complete all as specified.

Brass chromium plated shower rose 125 mm size with swivel joint, any size fix in repairs suitable for 15 mm dia pipe complete all as specified and directed.

Taking down carefully copper/aluminium point wiring complete (light,fan, plug point & power complete alongwith fittings (switches, ceiling roses, tube light fittings, bulk head fitting regulator, sockets main switches, DB removing materials to store & making good of disturb surfaces of wall/floors etc as specified & directed.

Point wiring with 1.5 Sqmm (22/0.30mm) PVC insulated and unsheathed multistranded copper conductor cable, 1100 volts grade, ISI marked, FR type drawn through and including PVC casing and caping (ISI marked) and its accessories such as Tee, elbow, jointer, elbow corner etc. fixed on surface of walls, coloumns/ beams alongwith 1.5 Sqmm (nominal area) copper conductor cable (multistranded) PVC insulated and unsheathed as earth wire connected to common earth dolly at one end and metalic bodies of luminaire/ fan at other end including PVC folding boards or wooden boards with sunmica top for mounting switches, sockets, fan Regulators, accessories etc as specified and directed for the following:- Make of wire- HPL/Polycab/Havells/Standard.

One light point and one fan point controlled by one, one way swtich.

One 5 Amp 5 pin socket outlet point on same board with other switches including earth wire as specified.

All as per ser item No. 98.20 here in before but on independent board.

All as per ser item No. 98 herein before but with 2.5 Sqmm (36/0.30mm) PVC copper stranded cable FRLS type for one 15 Amp 6 pin socket outlet point including PVC cable 1.5 Sqmm FRLS type copper stranded conductor as earth wire as specified & connected to commen earth & earth terminals including PVC/wooden folding boards for mounting purposes.

Switch socket combination multipurpose, flush type 2 in 1 type , 6 pin, 5/15 Amps, 230V, AC white/ivory finish, fixed complete all as specified & directed. Make -Havells / Leader /Vinay/ Anchor.

Switch piano flush button 5 Amp, single pole, one way, 230 volts white finish, fixed complete all as specified & directed. Make - Havells / Leader /Vinay/ Anchor.

Socket outlet flush type 5 pin 5 Amp multipurpose, 230 volts, single pole one way suitable for 3 pin/2pin 5 Amp plug top white/ivory finish, fixed complete all as specified & directed. Make - Havells / Leader /Vinay/ Anchor.

Fan regulator electronic on existing phenolic laminated sheet dimmer type 230 volts, 450 watts suitable for ceiling fan fixed in replacement including necessary connections complete all as specified and directed. Make - Legrand / Crompton / Havells / Bajaj / Orient / V-Guard / Polycab

Lamp holder, angle/batten type, PVC/Polycarbonate type with back plate suitable for batten fittings, fixed in replacement complete all as specified & directed. Make -Havells / Leader /Vinay/ Anchor.

Ceiling rose surface PVC 65 x 50 mm dia, 3 terminals including PVC mounting block, white/ivory finish fixed in replacement complete all as specified & directed. Make -Havells / Leader /Vinay/ Anchor.

LED Lamp suitable to fit in holder 10 W complete all as specified and directed.Havells Cat Part No.LED ADORE 10W E27 EDL CDL 3 STAR LAMP or equivalent in make Philips/ CG/ Wipro

Factory made box type batten for LED tube light complete with all accessories made up of rigid MS powder coated sheet of suitable thickness and suitable for LED tube rod of capacity upto 22 Watt prewired fixed in replacement complete all as specified & directed. Make - Havells Cat Part No. Professional luminaires Item Code - REGALBATTENT8UPTO1X22WSSBSWH or equivalent in make Philips/ CG/ Wipro .

LED Tube rod of capacity 20 watt complete with all accessories,fixed in replacement complete all as specified & directed. Make - Havells cat Part No.Professional luminaires item Code CRYSTAL1213T8DSTL20WLED865SGLASS Or equivalent in Make Philips/ CG/ Wipro .

Sheet metal enclosure (Factory made) double door shutter type for distribution board (when MCBs are to be used) single pole and neutral 240 volts 8 way with 200 Amps rated busbar, fixed in replacement complete all as specified and diercted. Make- HPL/Standard/ L&T/Schieder/Legrand

MCB SP, 6 to 32 Amps 10 KA single pole AC 230 volts, fixed in replacement complete all as specified and diercted.Make- HPL/Standard/ L&T/Schieder/ Legrand

MCB SPN 40 Amps 10 KA AC 230 volts, fixed in replacement complete all as specified and diercted.Make- HPL/Standard/ L&T/Schieder/Legrand

Isolator Fofour pole 63 Amps, AC 230 Volts, fixed in replacement complete all as specified and diercted.Make- HPL/Standard/ L&T/Schieder/Legrand

Submain wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade cables 6 Sqmm drawn through in and including PVC casing caping of suitable size including 6 Sqmm 1100 Volts grade PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified & directed. Make : Havells/Polycab/HPL/Plaza

Earthing complete with galvanized steel earth plate electrode of size 60cm x 60cm x 6mm thick buried directly in ground vertically at a depth not less than 2.25 metre deep below normal ground level with top edge of the plate not less than 1.5 metre below normal ground level surrounded from all sides by 15 cm thick packed layer of charcoal dust and common salt, filling in alternate layer and electrode connections by using galvanized iron earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers made of galvanized iron or steel and protected by light grade 15 mm dia GI pipe connected to main switch board or main control board, and GI pipe light grade 20 mm bore for watering and including funnel, wire mesh, RCC pit cover and PCC chamber pit with PCC 1: 2: 4 type C2 including excavation and earth work, disposal of surplus soil to a distance not exc. 50 mtr all as specified and as shown on Plate No 3 of SSR Part I (2009).

Energy saving LED Street light fitting 1x 30 Watt ECO pressure dia cast IP-65 completeincluding connecting with 1.5 Sqmm FRLS PVC insulated (unsheathed) single core cable, 1100 V grade double run of suitable length, fixed in replacement including testing and commissioning complete all as specified and directed. . Make:Havells Item Code- ENDURACITYLITEPLATPLUSSL30WL ED757SASYBOPC or eqvlnt as HPL / Crompton Greaves / Philips / Havells

Sheet metal enclosure (Factory made) double door shutter type for distribution board (when MCBs are to be used) single pole and neutral 240 volts 12 way with 200 Amps rated busbar, fixed in replacement complete all as specified and diercted. Make- HPL/Standard/ L&T/Schieder/Legrand

M/s AG PATHAN

Vinod Enterprises

BHAVIN INFRA

Manak landmarks

M/s.Abhay Kulkarni and Associates

M/S. Habib Magbul Pathan

AMAR CONSTRUCTION