Extension renovation and modernization of Kopili FIS under SOPD for the year 2020-21

Amount

Reconstruction of C.C Lined Canal

Labour charge for dismantling of old cc work of canal structure and carriage the spoils and depositing the same in a safe distance as directed. Carriage up to lead of 30 M and lift up to 1.5 M (For minor works )

Labour for preparation of subgrade of lined canal section as per design drawing and grade by ramming and rolled to level and according to the required cross section of the typical lined canal including cutting , filling the existing canal section where necessary compacting the earth in layers in not more than 15 cm thick to form a firm compacted bed & side for lining including watering to obtain required moisture content where necessary etc, complete as directed.(i) For sandy soil

Earthwork in excavation in irrigation canal to the design section and grade by depositing the spoils in the form of embankment in 15 cm layers on both banks as necessary including clearing light jungle, removing trees upto 15 cm dia and uprooting roots and stumps etc. from the seat of the embankment and canal free from all vegetationincluding breaking clods not than 10 mm cube, ramming, dressing and roughening the seat of the embankment with lead upto 30 M and lift upto 1.5 M, complete as directed.

Soling in foundation at all levels including filling intersides, ramming etc complete as directed and of specified thickness with 9 cm brick on flat including sand packing.

Centering and Shuttering including propping etc where necessary and removal forms after completion of CC and RCC works, complete as directed. (Measurement to be taken on the face area timbered). (B)(i) Shuttering (Beam) without prop.

Supplying fitting fixing and laying reinforcement (TATA) in position in RCC work including cutting bending cranking with two piles 0.91 M (20 BWG) annealed wire hooking tying complete as directed.

CC work in lined canal in prop 1:2:4 with river shingles of size 6 mm to 20 mm free from dust, dirt and other foreign materials conforming to IS 2116-1965 and 542-1962 as specified by the department, water used for mixing the mortar should be free from all impurities including laying the concrete over the subgrade, moistened throughly by hand placing / mechanical plcacing in canal of not more than 3 M sides with suitable joinst in between including prpviding bed sleeepers (cast in- situ or pre cast) under joints in between including providing all sealing materials as per design and drawing before laying concrete including finishing the surface smooth, clean of all impurities with curing the bed by manual labours and side by sprinkling for atleast 28 days etc, complete as directed. (Proper arrangement for obtaining clean water should be made at site).

Providing 50 mm wide expansion joints with bituminous compound mixed with coarse sand for canal work at an interval of 10 m apart including laying, fitting the compound in proper position etc. complete as directed.

Reparing of Inspection Bunglow

Dismantling and removing the existing door and window frame (chowkath) both wooden and steel of different sizes without damaging the walls and removing the frame and necessary repairs to the edges of the walls as directed for all levels. (i) Area of door/window upto 3.00 m2

Providing wood work in frame (chowkaths) of doors, windows, clerestory windows and other similar works wrought, framed and fixed in position in contact with C.C or brick masonry wall including supplying, fitting and fixing with M.S hold fast (40 mm x 3 mmx 250 mm) as per design embeded in cement concrete block in proportion 1:2:4 and with two coats of kiricide oiling to the timber faces in contact with C.C and masonry as directed and specified. With Sal wood:

Providing, fitting and fixing full panelled doors/windows including oxidised M.S butt hinges (100 mmx 75 mmx 3.55 mm) with necessary screws (other fittings to be measured and paid separately). (A) With Teak wood/Sissu wood

Supplying, fitting, fixing electrocoloured iron fittings of approved make, reasonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for wood screws including necessary screws etc complete .a) Sliding door bolts i) 300 mm x 16 mm

b) Tower bolts i) 300 mm x 10 mm

c) MS door handles iii) 150 mm

Providing and fixing clear sheet glass beded in putty and fixed with/without wooden bidding including necessary cutting and glass to be required sized (payment for wooden bead shall be made separately) (3) Area of glass panes exceeding 0.52 m2:(a) 5.00 mm thick

Providing and fixing 1st class timber beading for fixing clear sheet glass/frosted glass including applying a coat of wood preservative on unexposed surface.(A) With Teak wood/Sissu wood

Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asian paint/Berger paint/ICI paint/J and N paint/Nerolac) to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter sand papering and stopping. (i) Surfaces over 100 mm in width or girtha) a) General purpose (Asian paint/Berger paint/ICI paint/J and N paint/ Nerolac)

DHARMENDRA BARUAH

Ponkaj Deka

M/s K.C Enterprise