SPECIAL REPAIR TO ASHOKA ROAD FROM HQ AADC ENTRANCE GATE TO IG CIRCLE AND IMPROVEMENT UPLIFTMENT OF KITCHEN IN OFFRS MESS BLDG NO P 286 INCLUDING CERTAIN MINOR WORKS AT GE I GOS

Amount

Taking down cement plaster on wall/ceiling/roof etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for 15 mm thick rendering on fair faces of brick work or concrete surfaces in CM (1:6), finished even and smooth (without using extra cement). complete all as specified and directed.

M&L for rendering 5 mm thick in cement mortar 1:3 on concrete surfaces of ceiling and finishing the surfaces even and smooth complete all as specified and directed.

Dismantling of floor, hearth or walls tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off permises complete all as specified and directed.

M&L for 18 mm thick granite slab (of any type) work (table rubbed and polished) in cooking platforms, steps, window cills, incl edge moulding & cutting holes for gas pipe through drill machine and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L for glazed ceramics coloured tiles of size 350x250x7mm/ 450x350x7mm thick in vertical surfaces such as skirting/dados/wall, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces over & including 10 mm thick 1:4 cement plaster on fair faces of brick work or concrete surfaces etc complete all as specified and directed.

M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc 0.06 sqm but not exceeding 0.11 sqm in floors etc set & jointed in neat cement slurry and pointed with white or coloured cement to match over & including 15 mm thick screed bed or bedding layer of mortar for laying floor finishes complete all as specified and directed.

M&L for 550 mm x 550 mm size Pre-polished Machine cut Kota Stone slab flooring 20-25 mm thick over cement screed base laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete over & including 20 mm thick screed bed or bedding layer of mortar for laying floor finishes complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Taking down chowkats or frame with shutters of any description (without taking off shutters from the frames) not exc 1.50 Sqm each complete all as specified and directed.

Taking down chowkats or frame with shutters of any description (without taking off shutters from the frames) exc 1.5 Sqm but n exc 4.0 Sqm each complete all as specified and directed.

S & F Powder coated three track Aluminium sliding window with frame not less than 1.8 mm thick excluding aluminium grill and including 4 mm thick tinted glass, beading & necessary rubber packing, locking & opening arrangement, all fitting and fixture complete all as specified and directed.

S&F 7mm thick aluminium grills of make "Decogrill' model DG 104 surrounded by aluminium 'C' channel with mesh size 75 X 75mm complete all as specified and directed.

S&F aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples complete all as specified and directed.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.

S&F 15 mm bore 3 layer PP-R pipes SDR 7.4 & SDR 11 UV stablised and anti microbial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded PP-R fittings complete to walls, ceilings or in floors complete all as specified and directed.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for re-fixing or removal to store. complete all as specified and directed.

S&F 20 mm bore 3 layer PP-R pipes SDR 7.4 & SDR 11 UV stablised and anti microbial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded PP-R fittings complete to walls, ceilings or in floors complete all as specified and directed.

S&F in repairs sinks without drainge board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; & pvc waste pipe including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495 mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.

S&F in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes & waste pipe including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.

S&F in repairs Chromium plated grating doom 100 mm dia fixed in floor in CM 1:3 complete all as specified and directed

S&F in repair chromium plated Single Lever Sink Mixer Swinging Spout (Wall Mounted Model) with connecting legs & wall flanges complete all as specified and directed. Make- Jaquar Cat Part No.SOL-6163.

S&F in repair fancy type bib cock with wall flange 15 mm bore, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. Make-Jaquar Cat Part No.VGP-81037

S&F Stainless steel Towel Rack with lower Hangers but with 3 hooks. complete all as specified and directed. Make-Jaquar Cat Part No.AHS-1581H.

S&F in repair of stainless steel soap dish, of standard size and shape complete all as specified and directed. Make-Jaquar.

S&F in repair of stainless steel small size, silver colour, square shape Shower Basket, of standard size and shape complete all as specified and directed. Make- Jaquar Cat Part No.ACN-CHR-1177N.

S&F PVC (SWR) nahani/ floor trap, plain with grating with or without waste hole including jointing with solvent cement 75mm dia etc. complete all as specified and directed

S & F in repair sheet Glass Shelf assembly consisting of 5.5 mm glass sheet shelf 12 cm wide with cromium plated bracket guard and railing 60 cm long complete all as specified and directed.

Taking down old wooden/wood based particle board & S&F 18/19 mm thick high density PVC solid fibre board duly laminated 2mm thick prelaminated PVC sheet on front face (ISI mark) etc in kitchen cupboard etc.complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutter, & kitchen cupboard shutters with particle board core 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing all as specified. Make approved by GE.

S & F magnetic catcher with nut and screw of mild steel bright finish complete all as specified and directed.

S&F continuous (piano) hinges of brass width of flaps (when open) 40 mm,bright finish or electrogalvanised with cadmium plated screws complete all as specified and directed

S&F 100 mm long hasp & staple aluminium anodised wire type, including bolt to hinge plate and fixed with screw complete all as specified and directed.

S&F 100 mm dia aluminium handle, fabricated type polished fixed to board complete all as specified and directed.

M&L for Providing Precast Cement Concrete 1:2:4 type B-1 using 20mm graded stone aggregate in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves & similar articles with plain faces including necessary chamfers, weatherings, throating etc & setting in 1:6 cement mortar complete with joints to match including necessary formwork if required. complete all as specified and directed.

M&L for TMT Bars 10mm dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quions, arches, pillars, etc but excluding ashlar facings, dressed stone work & precast concrete article complete all as specified and directed.

Excavation in trenches in soft / loose soil, not exceeding 1.5 metre wide & not exceeding 1.5 metre deep; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sqm on plan including getting out, complete all as specified and directed.

M&L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate in foundations, filling & mass concrete. complete all as specified and directed.

M&L for Brick work with old size flyash bricks, straight or curved on plan exceeding 6m mean radius built in 1:6 cement mortar complete all as specified and directed.

M&L PCC 1:2:4 type B1 using 20mm graded stone aggregate in coping and the like including weathering slightly rounded/chamfered angles & throating with & including necessary formwork use. complete all as specified and directed.

Returning filling in any type of soil, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removing surplus excavated material (soil) to a distance not exceeding 50 metre & depositing where directed at a level not exceeding 1.5 metre above the starting point, including spreading complete all as specified and directed.

M&L for PCC 1:2:4, type B-0, using 12.5 mm graded stone aggregate as in sub base flooring, 25 mm thick surface finished even and rough (as in levelling course) to receive the topping layer complete all as specified and directed.

S&F Powder coated Aluminium Ventilator with frame not less than 1.8 mm thick & including 4 mm thick tinted glass including beading & necessary rubber packing, locking & opening arrangement if required, all fitting and fixture complete all as specified and directed.

Dismantling of Existing Suction Hood & Exhaust Blower & Supply & insallation of S.S. Cantilever type suction hood for cooking range top of length 4.88 m, width 0.85 m, height 0.45 m fabricated from 20/22 SWG S.S. Sheet including S.S. Baffle Filter width double frame for suction hood of size 500 mm × 700 mm fabricated from 24 SWG S.S. Sheet & including Exhaust Blower/Centrifugal Fan [5 HP Crompton Greaves/Marathone/ABB Make Motor (6 Pole, 3 Phase)] including all nut bolts, supporting rod etc complete all as per specified and directed.

S&F of Stainless Steel Pot Rack of size 48" × 24" × 60" having 04 Nos Selves, top 16 SWG 304 grade SS pipe & legs of 18 SWG Stainless Steel Pipes with adjustable feet complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall or concrete surfaces and applying 2 mm thick wall care putty complete all as specified and directed.

M&L for applying 2mm thick Birla / JK Putty in two layers on old wall surfaces including complete removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete all as specified and directed.

M & L for preparation of newly plastered surfaces of ceiling and applying 2 mm thick wall care putty complete all as specified and directed.

M&L for applying 2mm thick Birla / JK Putty in two layers on old ceiling surfaces including complete removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete all as specified and directed.

M&L for applying two coats of oil bound distemper on wall or concrete surfaces over & including a coat of primer on prepared surfaces including, rubbing with sand paper complete all as specified and directed.

M&L for applying two coats of oil bound distemper on ceiling over a coat of primer on prepared surfaces including, rubbing with sand paper complete all as specified and directed.

M&L for Repair to pot holes any depth, not exc 1 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, paths, etc cutting around edges to at least 25mm in depth, and making good by applying tack coat @ 5 Kgs per 10 Sqm and laying premixed bituminious macadam well rammed and sealed with paving bitumen 60/70 or VG-30 grade@ 9.8 Kgs per 10 Sqm, blinded with 0.09 Cum of stone chipping of size 6.3mm and again well rolled with 8 to 10 tonne power roller (Iincluding supply of pre-mixed macadam, binder and chipping) depth of pot holes exc 30mm complete all as specified and directed by Engineer-in-Charge.

M&L for Preparing existing black top surface or bituminous macadam surfaces by brushing with brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc on back top/concrete surfaces than applying evenly priming tack coat with paving bitumen 60/70 or VG-30 penetration over the prepared surface by mechanical sprayer @ 5 Kgs/10 Sqm of surface area complete all as specified and directed by the Engineer -in-Charge.

M&L for applying bituminous premixed semi dense asphaltic concrete 30mm thick (consolidated thickness) with 5.5% binder content of paving bitumen 60/70 or VG-30 grade by weight of total mix including cement filler, on surfaces rolled & compacted with using 8 to 10 tonne capacity power roller to achieve the required compactness, camber and gradient mixed in hot mix plant using design mix and laid by mechanical paver finisher complete all as specified and directed by the Engineer-in-charge.

M&L for preparation of existing bituminous surfaces, removing, dust, dirt grease and other foreign matters etc to receive the marking and M&L for thermo plastic (Reflective) line marking having 2.5 mm thickness (average) of uniform surface finish conforming to BS 3262 (Part 1) 1989 read in conjunction with the MOST specification 803 clause 4.2.2 on bituminous surfaces in white/yelow clour and super imposed with glass beads confirming to BS 6088 read in conjuction with and MOST specification 803 clause 4.3.3 complete all as specified and directed. Note - MOST specification 803 shall be followed strictly for execution of work & suitable machine shall be used for the marking as approved by the GE. Shape & size/ patterns of marking shall be as approved by the GE.

M&L for premixed bituminous macadam laid, rolled and compacted to required gradient and camber n.exc 75mm thickness (consolidated thickness) with 4% binder content of VG -30 by weight of total mix, mixed in hot mix plant and laid by mechnical paver finished complete all as specified and directed.

S&F in repair cat eyes/road studs for roadways sign permanent surface mounted type having tough poly carbonate micro replicated corner cube reflector lenses with a protective abrssion resistant ceramor coating having body of weather proof and impect resistant thermoplast complete as per manufacturer,s instruction and as directed. (Colour :- Yellow/Red/Amber) Make: Series 290 of 3M or Road Star or Equivalent.

S&F in repair solar cat eyes/road studs size (mm) 125L x 125B x 25H including stem height 53mm approx housing dia cast aluminium (grade LM-6) fully water proof and weather proof and weatherproof coating visible distance upto 400mtr LED-6 super bright amber led (3 Nos each side) yellow charged, flush frequency 1.2 Hz-1.8Hz including solar panel 3.5V/110MA & battery one PC sub ‘C’ type Ni-Cd rechargeable battery 1.2V/2.5AH temp range 20C to 70C fixed on road for roadway sign complete as per manufacturer’s instruction and directed by Engr-in-Charge Make- 3M/Avery Dennision/Dark Eye/Green/Greenlite/Road Star Cat Part No. GSR-909 or Equivalent.

S & F for solid PVC door frame of size 50x47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplied and fixing in opening as specified and shown on drawing made on section 8 of SSR 2010 Part-II complete all as specified and directed

S & F factory made solid panel PVC door shutter 30 mm thick style consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC “C” channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, S & F in the frame as shown on drawing in section 8 of SSR-2010 Part-II complete all as specified and directed

Cutting holes in brick walls exc half brick but not exc one brick built in cement mortor or cement lime mortor and stone walls built in lime mortor for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed.

S&F aluminium, anodised, barrel tower bolts of extruded section 150 mm long complete all as specified and directed.

S&F extruded aluminium alloy handles fabricated type anodised of 150 mm size complete all as specified and directed.

S&F Butt hinges, medium weight, cold rolled mild steel 100 mm long complete all as specified and directed.

M&L for non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangle) area of each tile exc 0.11 sqm but n exc 0.18 sqm jointed in neat cement slurry and pointed in white or colour cement to match the shed of tiles including screed bed or bedding layer 15 mm thick in cement mortar 1:4 complete all as specified and directed

M&L Wash down water closet vitreous china white pedestal pattern with 'P' or 'S' trap including connecting to outgoing drain pipe & to flushing pipe excluding flushing cistern and flush pipe complete all as specified and directed.

S&F in repairs plastic water closet seat cover, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F PVC 10 litres capacity valveless ,syphonic action type low level flushing cistern ,white including flush pipe, cantilever brackets ,inlet, ball valve, float and handle, PVC connection 15mm dia etc complete all as specified and directed.

S&F in repairs CP jet spray/ Health faucet with 1.5 mtr 15 mm bore PVC tube and hook all as specified & as directed. Make-jaguar

M&L for vitreous china wash basin, white,flat back, size 550 x 400 mm with brackets, including supply & fixing pillar cock 15 mm bore CP fancy type, PVC connection of 450 mm long, PVC (HDPE) 32 mm bore waste pipe, brass couplings 32 mm CP etc complete all as specified and directed.

M&L in repairs for Vitreous China urinals, bowl type flat back size of 465 x 355 x 265 mm white (minimum) with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement etc complete all as sapecified and directed.

M&L Vitreous China Urinal partition white of size 310 X 700mm as specified and directed.

S&F in repair PVC connection 15 mm bore, 450 mm long complete with both ends unions complete all as specified and directed.

S&F in repairs Pillar taps 15mm, fancy type cast copper alloy with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F PVC waste pipe of bore 32mm for urinal/WHB etc all as specified and directed.

S&F in repair Chromoium plated angle cock, cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or brass ferrule, 15 mm bore complete all as specified and directed.

S&F brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified and directed.

S & F in repair Soap dish any type fixed to plug with chromoium plated brass screw complete all as specified and directed.

S&F 50 mm bore PVC Pipe fixed complete to walls, ceiling or in floor complete all as specified and directed

M&L Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

S&F 16 mm outer dia 3-layer PP-R polypropylene random copolymer) concealed pipe SDRT-4 (PN-16) UV stabilized and antimicrobial fusion welded having thermal stability for hot and cold water supply incl; all PP-R palin & brass threaded polypropylene random fitting fixed complete to walls ,ceilings or in floors complete all as specified and directed.

Taking down cement or cement lime plaster, of any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m depth for foundation etc or for shafts, wells cesspits manholes pier holes etc not exceeding 10 Sqm on plan and not exceeding 1.5 m depth in hard / dense soil etc complete all as specified and directed

M&L for PCC 1:2:4 type B-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

M&L for RCC (nominal mix) 1:1.5:3 type B1 using 20 mm graded stone aggregate as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc, basement slabs, under reamed piles and mass concrete complete all as specified and directed . Note - Reinforcement and form work shall be measured and paid separately.

Form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams etc and similar work, vertical or to batter for rough finished flat concrete surfaces complete all as specified and directed.

M&L for RCC (nominal mix) 1:1.5:3 type B1 using 20 mm graded stone aggregate as in columns, pillars, piers, posts and struts and similar work complete all as specified and directed. Note - Reinforcement and form work shall be measured and paid separately.

Form work to sides of pillars, posts, struts, piers, columns and stanchions for square, rectangular or polygonal rough finished concrete surface complete all as specified and directed

M&L for RCC (nominal mix) 1:1.5:3 type B1 using 20 mm graded stone aggregate as in beam, cantilevers, bressummers, lintels over 1.5 m span and similar work complete all as specified and directed. Note - Reinforcement and form work shall be measured and paid separately.

Form work to sides and soffits of floor or roof beam, beam hauchings, girders, bressummers, lintels, cantilevers, shelves, for flat rough finished concrete surfaces complete all as specified and directed.

M&L for RCC (nominal mix) 1:1.5:3 type B-1 using 20 mm graded stone aggregate as in slab supported on wall,beam and column in floors, roofs, landings, balconies, canopies and in shelves and similar work complete all as specified and directed. Note - Reinforcement and form work shall be measured and paid separately.

Form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200 mm thick (horizontal or sloping) for rough finished flat surface of concrete complete all as specified and directed

Form work to edges of concrete flats, treads breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roof and sides of bands in walls, horizontal or sloping and similar work for fair finished concrete surface exc 10 cm but not exc 20 cm wide complete all as specified and directed.

S&F Mild steel TMT bars 8mm dia and over, cut to length, spacers and binders and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F Mild Steel TMT bar 5mm dia and over upto and including 10mm dia as in stirrups, spacers & binders cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate, 40 mm thick in damp proof coarse to horizontal or vertical surface with using WPC including necessary form work complete all as specified and directed. Note -WPC shall be measured and paid seperately

M&L for rendering 15mm thick in CM 1:4 on brick or concrete surface, finishing even and smooth without using extra cement but using water proofing compound complete all as specified and directed.

M&L moorum / red bajri filling in floors or pavings laid in layers not exceeding 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M&L Hard core of gauge n.exc 63 mm, deposited, spread, levelled in layers not exc 15 cm thick, watered and well rammed to a true surface.

M & L Cement concrete type C-2, 1:3:6 using 40 mm graded crushed stone aggreates 100 mm thick as in flooring finished even and fair complete all as specified and directed.

M&L for 20 mm thick screed bed or bedding layer in CM 1:6 surface finished fair and even for laying floor finishes complete all as specified and directed.

M&L for chequered cement concrete tiles 20 cm x 20 cm x 22 to 25 mm thick set, jointed and pointed in neat cement slurry as in floors with grey cement and pigments complete all as specified and directed.

M&L for two coats of cement based paint over a coat of alkali resistant priming paint after preparation of new plastered surface

S & F triple layered antibacterial white coloured rotational moulded polyethylene water storage tank (cylindrical vertical with closed top)2000 litre capacity hoisted and fixed in position complete all as specified and directed

S&F Ball brass valves, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule of 20 mm bore of pipe complete all as specified and directed.

S&F Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe of 20 mm bore of pipe complete all as specified and directed.

S&F Gun metal globe or gate valves with iron wheel head screwed both ends (ISI marked) for iron pipe of 25 mm bore of pipe complete all as specified and directed.

S&F GI tubes medium grade (ISI marked) with all fittings fixed to walls and ceilings or laid in floors of 15 mm bore of pipe complete all as specified and directed.

S&F GI tubes medium grade (ISI marked) with all fittings fixed to walls and ceilings or laid in floors of 20 mm bore of pipe complete all as specified and directed.

S&F GI tubes medium grade (ISI marked) with all fittings fixed to walls and ceilings or laid in floors of 25 mm bore of pipe complete all as specified and directed.

Supply only water proofing compound of approved make.

M & L for water proofing treatment for roof slabs including crumple joints by applying bitumen primer @ 0.3 ltr/sqm then applying bot blown 85/25 @ 1.20kg/sqm and laying APP modified bituminous 3mm thick with non oven polyester core water proofing membrane laid and bonded to the sub-strata by heat process, over lap shall be sealed by flame torch application not less than 3.2kg/sqm with over lap of 100mm and end lap of 150 mm and APP membrane shall be covered with bituminous based aluminium paing @0.2kg/sqm on top complete all as specified and directed.

S&F 12 mm thick plain Gypsum Board false ceiling with GI frame including all necessary drilling cutting to fix electric items complete all as specified and directed with following:- (a) GI Grid channel 30x25x20 mm of 24 gauge fixed with rawl plug and screw 450 mm centre to centre alongwith perimeter walls. (b) GI channel made to shape 50x40x40 mm of 24 gauge placed @ 600 mm centre to centre from perimeter at wall except long wall (in one span). (c) GI intermediate runners of size 45x10x10 mm of 24 gauge fixed @ 1200 mm centre to centre leaving frame of one side walls (in other span). (d) GI sheet 25 mm wide and 20 mm gauge suspended fixed with steel fastner to roof ceiling and 1200 mm centre to centre including pluging of RCC Slab. (e) 12 mm thick gypsum board filling joints with POP and finishing complete with two coat of plastic emulsion paint over one coat of primer on ceiling.

M&L Excavating over areas n exc 1.5m deep and getting out in hard/dense soil complete all as specified and directed.

M&L Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L machine pressed precast concrete interlocking paver block any shape & size conforming to IS 15658-2006 of 60 mm thickness with grey cement and pigment, M-35 grade complete all as specified and directed.

M&L Providing Cement concrete type B-0 1:2:4 (12.5 mm graded) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex tones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete.

Excavation in post holes (or similar holes) each not exceeding 0.50 cum, in soft/loose soil, getting out, returning filling in & ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering or removing surplus soil to a distance not exceeding 50 m & making good surface. Complete all as specified & directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS:1161-1998 grade St-240. Complete all as specified & directed.

S&F of Roof trusses (framed), trussed, purlins, crane gantries, rails & fastenings & heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. of Fe410-W (Gde-E-250) quality-A. Complete all as specified & directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified & directed.

M&L for preparation of new or previously untreated surfaces of any description, over 10 cm in width or girth, not otherwise described & apply two coat of synthetic enamel (ordinary tint) over & including one coat of red oxide, zinc chrome primer. Complete all as specified & as directed.

Surface excavation not exceeding 30 cm deep and averaging15 cm deep and getting out in any type of soil complete all as specified and directed.

M&L Brick work using fly ash bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed.

M&L for taking down carefully old UNSV aluminium point wiring with wooden batten and all accessories of(light, fan, socket or power) such as switches socket ceiling rose, fan regulators, light fitting, main switches DB’s etc and making good disturb surface complete all as specified and directed.

M&L for point wiring with cable PVC insulated but unsheathed, 1.5 Sqmm, stranded copper conductor in and including PVC conduit duly concealed continuous earthing with cable PVC insulated 1.5 Sq mm copper conductor, MS box including laminated top sheet cover,washer & screw complete all as specified and directed. One light point controlled by one, one way switch.

All as per item no.130 above but for One fan point controlled by one, one way switch.

All as per item no.130 above but for One exhaust fan point controlled by one, one way switch.

All as per item no.130 above but for One 5 Amp socket point controlled by one switch on independent board

All as per item no.130 above but for One 5 Amp socket point controlled by one switch on same board

All as per item No.130 above but with cable PVC insulated 4.0 Sq mm (FR) in and including PVC Conduit incl continuous earthing with cable PVC insulated 2.5 Sq mm copper conductor for power socket 15Amps complete all as specified and directed. Make : Anchor/ Standard/ Finolex/Havells/HPL)

S&F switch socket combination 2-in-1, 5 pin 5 Amp (Make : Anchor/ Standard/ C&S/Havells/HPL).

S&F switch socket combination 2-in-1, 5 pin 5 and 15 Amp (Make : Anchor/ Standard/ C&S/Havells/HPL).

S & F switch piano (Flush type) 5 amps, 240 Volts, single pole one way.

S&F ceiling rose, bakelite three terminal complete all as specified and as directed

S & F ceiling fan regulator electronic step type socket mounting type. (Make : Anchor/ Standard/ C&S/Havells/HPL)

S & F LED light fitting 18/ 20 Watt T5 batten type,PVC extruded batten with decorative end caps complete with polycarbonate /glass tube 4Ft White , internally pre-wired and including connecting up with suitable twisted flexible copper conductor cable with suitable size complete all as specified and directed.

M&L for 4 Runs of cable PVC insulated but unsheathed 6.0 Sq mm, stranded copper conductor in and including PVC conduit with concealed continuous earthing cable PVC insulated 4.0 Sq mm, stranded copper conductor complete all as specified and directed. make Anchor/Havells/Finolex)

M&L for 4 Runs of cable PVC insulated but unsheathed 10 Sq mm, stranded copper conductor in and including PVC conduit with concealed continuous earthing cable PVC insulated 6.0 Sq mm, stranded copper conductor complete all as specified and directed.(make Anchor/Havells/Finolex)

S&F sheet metal enclosure Triple pole and neutral Double door vertical type suitable for MCCB 4 pole as incomer(w/o MCCB) for flush/surface mounting with bus 200Amps rated, 415 V, with neutral link & earth bar ,and taking down unserviceable DB/main switch complete all as specified and directed.

Supply and fixing in replacement MCCB adjustable type 4 pole 415 volts of capacity 100 amps 25 KA complete all as specified and directed. Make Standard/ Havells/ L & T / MDS/Legrand/HPL

S & F MCB SPN 32 to 40 Amps 10 KA 240 Volts (Make : Anchor/ Standard/ C&S/Havells/HPL)

S & F MCB, SP 6 to 32 Amps 240 Volts rating (Make : Anchor/ Standard/ C&S/Havells/HPL)

Supply & fix exhaust fans AC single phase 230/ 240 V of size 380 mm sweep metal body with louver complete all as specified and as directed

Supply and fix ceiling fans complete with accessories 230 V , 1200 mm sweep BEE 5 star rated complete all as specified and directed. Make : cat part No: Premium Summercool 1200mm (white) of Orient/Crompton

M&L for earthing with galvanized steel earth plate electrode 600 x 600 x 6mm thick, buried directly in ground(earth pit not less than 2.25 mtrs deep below ground level)with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers protected with & including 15 mm dia light grade GI pipe necessary excavation and earth works, charcoal and common salt filling, watering arrangement with 20 mm GI pipe light grade including PCC pit with Pre cast RCC (1:2:4) cover, GI funnel with mesh test point, testing & commissioning complete all as specified and directed.

Supply & fix LED tube light along with fixture,18W complete all as specified and as directed

Supply and fix Bldg Security light fitting LED type of 45 watt powder coated pressure die cast aluminium compact LED light fittings with with GI tubing 40 mm medium grade, mounting bracket and end nipple/nozzle of the bracket of size suitable to house the light fittinhg , with its Galvanised Flat Iron clamps, including connecting of with 3 core PVC insulated & PVC Sheathed cable , 1100V grade 1 sqmm from fitting to the exisitng ceiling rose complete all as specified & directed (Make C&S / WIPRO / Bajaj / Phillips / Havells) (Note : Contractor shall submit warratny for 03 yrs)

S & F of light fittings (2Ft) with wall mounted LED pattern with polycarbonate housing & integrated electronic driver of 9W cap T5(max lenght upto 600mm) complete all as specified and directed. Make :- (Make C&S /WIPRO/ CG / Phillips / Havells) (Note : Contractor shall submit warratny for 03 yrs)

Supply and install Deep Freezer 320 ltrs capacity electric driven single phase 240 Volt, 50 Hz having single door complete all as specified and directed. Make : Voltas/Goderj/LG

M&L for point wiring with cable PVC insulated but unsheathed, 2.5 Sqmm, stranded copper conductor (FR LS)in and including PVC concealed conduit incl continuous earthing with cable PVC insulated 1.5 Sq mm copper conductor, washer & screw etc complete all as specified and directed of size (a) One light point controlled by one, one way switch

S&F switch socket combination 2-in-1, 3 pin 15 Amp. Including PVC rectangular block for mounting switches,socket,fan regulator etc with 3mm thick plastic lamination sheet of size 175x100X50MM Deep Make : Anchor/Leader/SSK

S&F submersible pump set 7.5 HP capacity complete, 3 phase including testing complete all as specified and directed by Engr-in-Charge. Make : KSB

Supply and fix 3 m long column pipe 50 mm dia with both ends flanged or socket fix in ground, inside borewell etc alongwith complete fittings including dismantling of the unsv column pipe/GI tubing,complete all as specified and directed.

Supply and fix PVC insulated and PVC sheathed industrial cable 6 Sqmm 3 core flat, 1100 volt submersible cable complete all as specified and directed by Engr-in-Charge.

Supply and fix SWG 4mm to 6 mm in size with proper jointing in both ends complete all as specified and directed by Engr-in-Charge.

Supply, testing and commissioning AC single phase, Static Energy meter of accuracy class 1.0, 240V, 50 Hz, with backlit LCD display, of rating 10-60A, (Measures and displays KWh, V, I, KW, PF, Last month history of KWh & MD in KW) with special features like TOD, Tamper logging, Optical communication port and display in absence of power with transparent hinge type box complete all as specified and directed by Engr-in-Charge. Make : HPL Cat No SPPL1521120002ME03 or equivalent in L&T/BHEL

Supply, testing and commissioning AC Three phase, Static Energy meter of accuracy class 1.0, 3x240V, 50 Hz, with backlit LCD display, of rating 10-60A, (Measures and displays KWh, V, I, KW, PF, Last month history of KWh & MD in KW) with special features like TOD, Tamper logging, Optical communication port and display in absence of power with transparent hinge type box complete all as specified and as directed by Engr-in-Charge. Make : HPL Cat No TPPB1521130002ME01 or equivalent in L&T/BHEL

Supply and replacement of teak wood wooden board closed recessed of size 30cmx25cm suitable for fixing energy meter complete all as specified and directed by Engr-in-Charge.

Supply and replacement of 3 core 10 sqmm PVC insulated and PVC Round Sheathed, Copper Conductor (flexible) cable, 1100 Volts, conforming to IS: 694 complete all as specified and directed by Engr-in-Charge.

Supply and Fixing water heater storage type electric capacity 25 litres BEE 5 star rated including nut bolt grouting with its clamp set & PVC connection pipe with embedded copper mess heavy duty complete all as specified & directed Make : cat part No: Monza Digi GHWAMJSWH025 colour white-Grey of Havells or equivalent make

M&L for 2 Runs of cable PVC insulated but unsheathed 4.0 Sq mm, stranded copper conductor in and including PVC casing caping with continuous earthing cable PVC insulated 2.5 Sq mm, stranded copper conductor complete all as specified and directed. make: Anchor/ Havells /Finolex)

Supply and fixing GI tubing medium grade 15 mm bore complete all as specified all as directed.

Likitha Enterprises

M/s Ats Electricals

M/s Bapujee Builders and Traders

M/s MAA BHAIRABI ENTERPRISES

DHABALESWAR ENGINEERING WORKS

G.KRISHNA MURTHY AND PARTNERS

ABC CONSTRUCTION COMPANY