Renovation of ST Residential High School at Rajbandh, Seraikella, Dist-Seraikella Kharsawan

Earth work in excavation in foundation trenches in ordinary soil ( vide classification of soil item A) and disposal of excavated earth as obtained to a distance upto 50M including all lifts leveling ramming the foundation treanches, removing roots of trees, and shrubs all complete as per approved design, building specification and direction of E/I.

Extra for earthwork in hard soil as per specification and direction of E/I. ( vide classification of soil item-B)

Providing coarse clean sand in filling in in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials labour, royalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume)

Providing designation 75B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone aggregate 40 mm nominal size)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, butteress, plinth and string courses, fillet, columns, pillars, piers, abutments, posts and struts etc, above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcemnet: 1:1.5:3 (1 cement: 1.5 coarse sand(zone-III):3 graded stone aggregate 20mm nominal size)

Providing 12mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing 6mm cement plaster (1:4) in celling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Dismantling old plaster and pointing in cement or lime and raking out joints to 15mm depth, watering and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Extra for cleaning the old surface by scrapping the entire old white wash or colour wash including cost of scaffolding all complete as per direction of E/I.

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).

Centering and shuttering including strutting, propping etc and removal of form for walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

Suspended floors, roofs, landings, balconies and access platform

Providing Tor steel reinforcement of 10mm,12mm,& 16mm. dia bars as per approved design and drawing exclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. (a) 10mm (TMT coil Fe 500) (only valid for SAIL & TATA STEEL)

Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing 1.5mm neat cement punning including curing carriage of water with all leads and lifts as per building specification and direction of E/I.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal old rubbish to the dumping ground, all complete as per direction of Engineer-in-charge. With cement mortar 1:4 (1 cement: 4fine sand)

Providing one coats of plastic emulsion paint of approved shade and make over old surface including washing cleaning and preparing the walls scaffolding washing of floor and taxes all complete as per building specification and direction of E/I.

Providing two coats of plastic emulsion paint of approved shade and make over old surface including washing cleaning and preparing the walls scaffolding washing of floor and taxes all complete as per building specification and direction of E/I.

Providing 250mm. Wide brick drain in cement mortar (1:6) with av. 150mm clear depth and 250mm apron including cost of eartwork involved with 75mm cement concrete (1:4:3) over one brick designation 75A flat soling in proper grade and slope at the base the drain duly plastered in C.M. (1:3) with punning over exposed surface all complete as per building specification and direction of E/I.

Dismantling patent stone floor including stacking serviceable materials in countable stacks within 15M lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Providing and laying Doublecharge vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 / ISO 13006 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm .

Providing and laying 6mm precast white glazed tiles in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointing with white cement including rubbing, polishing and cost of curring taxes and royalty all complete as per building specification and direction and E/I. With "A" grade white 15X15cm Tiles.

Labour for scrapping old paint with paint remover and below lamp as required on wooden or steel surface including cost of all labour and materials and scaffolding all complete as per building specification and direction of E/I.

Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing dust, dirt scales smokes and grease and cleaining the surface thoroughly including cost of scaffolding and taxes all complete as per building specification and direcction of E/I.

Providing two coat of painting with ready mixed paint of approved shade and make over steel surface including cleaning the surface throughly , scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I

Water proofing for old and new roof slab:- Providing and laying water proofing treatment on roof slab by appying two component, factory designed, ready to use, acrylic modified flexible material applied with brush, roller or spray for water proofing coating as per manufacturer specifications with following steps:- (a) Surface preparation:- Providing and cleaning of concrete surface to remove dust, oil, grease including removal of existing loose paint/ coating, and cement laitance by cleaning with compressed air & water jet including all materials, labour, tools, complete.

Providing precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 6mm nominal size ), reinforced with 1.6 mm dia mild steel wire, including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 fine sand) etc. complete, excluding plastering of the jambs, sills and soffits.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level 1:2:4 (1 cement: 2 coarse sand (zone-III): 4 graded stone aggregate stone aggregate 20mm nominal size.)

Providing 25mm thick first class patent stone flooring (1:2:4) with stone chips in two layers, bottom layer 19mm thick(1:2:4) with 12mm to 6mm size graded stone chips and top layer 6mm thick (1:2) with 6mm down stone chips, in panels including cost of curing, finishing the surface smooth by rubbing with carborandum stone, taxes and royalty with all complete as per building specification and direction of E/I.

Taking down old door and window shutters including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Taking down chaukhats in doors including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Taking down chaukhats in windows including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Supplying, fitting and fixing 20 guage G.C.I. Sheet gate fitted on M.S. Angle frame of size 60X60X6mm. Including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I.

Easing and adjusting door and window shutters with chaukhats in old work complete as per specification and direction of E/I.

Supplying fitting and fixing glass panes including supplying putty. Beads and nails after taking out old and broken glass panes and disposal of debris all complete as per building specification and direction of E/I. 5.5 mm plain

Providing two coats of synthetic enamel paint of approved shade and make over old wooden surface including cleaning the surface after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I.

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.

Supply of Angle Iron 50 X 50 X 6mm

Providing designation 75 B brick work in C.M. (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including, providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/I.

Labour for fabricating, erecting, hoistion and fixing in position structrral steel work in R.S. Joist, channel, Angle, Tee, flat, plate, latice member, built up compound section in column, girder, stair case, or truss including cost of gusset plates, holding down bolts, anchor plates at all heights and depths, bolting, welding ( machining wherever necessary) with applying a priming coat of red lead paint all complete as per approved drawing, building specification and direction of E/I.

Supplying, fitting and fixing fully glazed steel door, window or ventilations of standard rolled 'Z' and mullion steel sections and size as per IS-1038 joints met and welded with 100X16X3mm M.S. lugs fixed in cement concrete (1:2:4) block 15X10X10cm, size including cost of oxidised iron fittings, with hinges, handle per steps, catch springs, 3mm thick plain glass panes with Aluminimum beads and inner frame fixed with lugs with 20mm long 6.3mm G.I. counter sunk machine screw and nuts and applying a coat of red lead paint carriage to work site hoisting and placing in position in all storys and taxes all complete as per building specification and direction of E/I.

Dismantling pucca brick or lime work including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Structural Steel average rate

Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey-comb shaft with bricks and S.W. drain pipe 100mm diameter, 1.8 m long complete as per stanDSRd design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

M.E.P ELECTRICAL Point wiring in PVC conduit, with pino type switch:- wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor singal core cable in surface/ recessed PVC conduit with piano type switch, phenolic laminated sheet, suitable size PVC/G.I box ect. as Group B

Circuit submain wiring in pvc conduit 'wiring for circuit/ submain wiring along with earth ire with the folloeing sizes of fr pvc insulated coper insulated copper conductor single core cable in surfce recessed pvc conduit as required 2x 1.5 sq. mm + 1x 1.5 sq. mm earth wire

Circuit submain wiring in pvc conduit 'wiring for circuit/ submain wiring along with earth ire with the folloeing sizes of fr pvc insulated coper insulated copper conductor single core cable in surfce recessed pvc conduit as required 2x 2.5 sq. mm + 1x 2.5 sq. mm earth wire

Circuit submain wiring in pvc conduit 'wiring for circuit/ submain wiring along with earth ire with the folloeing sizes of fr pvc insulated coper insulated copper conductor single core cable in surfce recessed pvc conduit as required 2x 6 sq. mm + 1x 6 sq. mm earth wire

S/F S.P. MCB DB:- Supplying & fixing following way single pole neutral, sheet, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper busbar, neutral busbar, earth bar, din bar, detachable gland plate,interconnections, phosphatized & powder painted including earthing etc. as required. (But wihtout MCB/RCCB/Isolator) 8 way, Double Door

50/63 amps ratting, SP MCB "C" series 10 ka breaking capacity

1X 28 watt T5 tubelight

Instalation testing and commissing of pre wired fluorescent fitting. Compact fluorescent fitting of all type complete with all accessories and tube etc directly / wall including connecting with 1.5 sqmm fr pvc insulated copper conductor single core cable and earthing etc as required

CEILING FAN 48" (1200MM )

Ceiling FAN 56" (1400MM )

ITC ceilling fan:- Installation, testing & commissioning of ceilling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FR PVC insulated, copper coductor, single core cable etc, as required.

laying of one no. pvc insulated & pvc sheathed/ XLPE power cable of 1.1 KV grade of size exceeding 950sq mm but not exciding 185 sq mm direct inground including exacavation, sand cushion, protection covering and refilling the trenches etc. as required

S/F of following sizes of pvc / G.I box on surface/ recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required. 75 x 75x 50mm deep / (4"x4")

S/F PVC/ G.I Boxes:- Supplying & fixing PVC/ G.I box of following sizes on surface or in recess withsuitable size of phenolic laminated sheet cover infront including painting etc. ad required. 210 mm x 206 mm x 48mm deep / (10" x 12")

S/F Piano type switch/ socket:- Supplying & fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 3 pin 5/6 amps, socket outlet

S/F Piano type switch/ socket:- Supplying & fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 5/6 amps, one way switch

S/F Modular type switch socket - Supplying and fixing following modular switch/socket on the existing modular plate and switch box including connection but excluding modular plate etc. as required 5/6 amps, 3 pin socket outlet

S/F Modular boxes, base & cover plate - Supplying and fixing following size/modules G.I. box along with modular base & cover plate for modular switches in recess etc. as required. 1 or 2 module (78mm x 78mm x 45mm)

S/F Modualr type blanking plate - Supplying and fixing modular blanking plate on the existing modular plate and switch box excluding modular plate as required.

S/F Modular type electronic fan regulator - Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

15/16 Watt bulb

Copper earth plate elecrtode - Earthing with copper earth plate 600mmx 600mm x 3mm thick including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. as required (with charcoal or coke and salt)

P/F G.I. lightning conductor finial - Providing and fixing of lightning conductor finial, made of 25mm dia 300mm long, G.I. tube, having single prong at top, with 85mm dia 3mm thick G.I. base plate including holes etc. complete as required.

Reverting, sweating and soldering lightning conductor tape - Reverting, sweating and soldering of copper/G.I. tape (with another copper/G.I. base of the final or any other metalic object) as required.

Fixing lightning conductor tape in vertical run - Fixing of copper/G.I. tape 20mm x 3mm thick on parapet or surface of wall for lightning conductor as required. (For vertical run)

ITC exhaust fan upto 450 mm sweep - Installation of exhaust fan upto 450mm sweep in the existing opening, including making the hole to suit the size of the above fan, making good the damage, connection, testing, commissioning etc. as required.

12" (300mm) metal exhaust fan

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall25 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 32 mm nominal outer dia Pipes

Supplying, fitting and fixing viterous white glazed earthen ware I.W.C of parry Hindustan or any other I.S.S approved make with 100 mm H.C.I 'P' trap 15 liters C.I pull and let go flushing cistern of names or other I.S.S equivalent make, complete with all fitting, C.I or C.C Brackets 32 mm 580mm long with 10 Liter Low Level P.V.C cistern

Supplying, fitting and fixing vitreous white glazed earthen aware I.W.C of parry hindustan or any -do- (C) 450mm long with 12.5 lit. low level C. I. cistern

White glazed Vitreous earthen were urinal standing corner size Hindustan/ Parry Ware/ Cera/ Naycer or any other equivqlent make 600mm x 350mm.

partion plate urinal 25" x 13"size +1.45% CPOH

Providing and placing on terrace (at all floor levels) polyethylene water Storage tank ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow Pipes but without fittings and the base support for tank.

Providing and fixing G.M non return valve Horizontal/Vertical type of approved quality as per specification of E/I. Horizontal - 32mm dia

(B) Vertical non-return valve (iv)- 32mm dia

Providing and fixing G.M non return valve Horizontal/Vertical type of approved quality as per specification of E/I. 25 mm dia

40 mm dia

Special type of C.P Bath room fittings for V.I.P Buildings (JAL, Jaquar, Marc or equivalent make) (ISI Marked) Pilar cock (longneck) V.I.P

Special type of C.P Bath room fittings for V.I.P Buildings (JAL, Jaquar, Marc or equivalent make) (ISI Marked) Bib cock long thread

Special type of C.P Bath room fittings for V.I.P Buildings (JAL, Jaquar, Marc or equivalent make) (ISI Marked) Angular Stop Cock (long Thread)

Special type of C.P Bath room fittings for V.I.P Buildings (JAL, Jaquar, Marc or equivalent make) (ISI Marked) C.P brass towel rail

Special type of C.P Bath room fittings for V.I.P Buildings (JAL, Jaquar, Marc or equivalent make) (ISI Marked) C.P brass soap dish

Supplying, fitting and fixing 40mm high vitreous white glazed earthen ware E.W.C. with 'P' trap Of parry Hindustan or any other I.S.S. make including supplying and fixing 15 litres C.I. mosquito proof low down flushing cistern of approved make with complete fittings with C.I handle and R.S or bracket with telescopic flush pipe with brass coupling and plumbers joints spindle stop cock of approved quality weight not less than 450grams 15mm P.V.C alkathene pipe 45cm. long with brass coupling at both ends and white/black plastic solid state seal and lead of commander cuckoo or other I.S.S make with hinges or screw etc. painting pipe and cistern etc. with 2 coats of approved paint over a coat of red oxide priming, all complete as per specification and direction of E/I. (ii) E.W.C. with 'S' trap (a)12.5 lit. low level C.I cistern

Providing & fixing N.P/C.P brass/P.V.C.porcelain shower rose of 15mm inlet etc. All complete as per specification and direction of Engineer-in-charge (c) 1500 dia P.V.C. Shower

Supplying, fitting and fixing the following items complete with all materials as per specification and direction of E/I. Mirror (600 x 450 mm)

(C) (i) C.P. brass towel rail 20mm x 600mm with bracket container

Supplying, fitting and fixing the following items complete with all materials as per specification and direction of E/I. C.P brass dish container medium quality with screw and hinges etc.

Supplying fitting and fixing white glazed fire's clay sink of approved make with overflow arrangements supported on c.I. Or R.S. Painted brackets 40mm. Dia C.P. brass waste with C.P. brass waste with C.P. brass chain and rubber plug 40mm dia P.V.C. waste pipe about 750mm long with brass coupling at one ended 15mm C.I. body brass spindle bib cock of approved quality of weight not less than 450gms. including cutting wall and making good the same etc. all complete as per specification and direction of E/I (i)Kitchen sink 600mm x 450mm x 250mm

Providing and fixing wash basin with C.I brackets, 15 mm C.P brass waste of standard pattern, including painting of fittings and brakets, cutting and making good the walls wherever require: White Vitreous china wash basin size 60x450 mm with a pair of 15 mm C.P brass pillar tap

Providing & fixing chlorinated polyvinyl chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fitting, includingfixing the pipe with clamps at 1.00 m spacing this includes jointing of pipes & fittings with one step CPVC solvent cement and testing of koints complete as per direction. Internal work - Eaposed on wall 25 mm nominal outer dia Pipes

Providing & fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fitting,I/C fixing the pipe with clamps at 1.00 m spacing this includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing direction of engineer in charge. Concealed work, including cutting chasesand making good the walls etc. 15 mm nominal outer dia Pipes

Providing & fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fitting,I/C fixing the pipe with clamps at 1.00 m spacing this includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing direction of engineer in charge. Concealed work, including cutting chasesand making good the walls etc. 20 mm nominal outer dia Pipes

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75 mm diameter

Providing & fixing PVC pipe fitting with all accessories (Supreme Make) Single tee with door 75X75X75 mm

Providing & fixing PVC pipe fitting with all accessories (Supreme Make) Single Tee without Door 75X75X75 mm

Providing & fixing PVC pipe fitting with all accessories (Supreme Make) Bend 87.5 degree 75 mm bend

Supply of HCI Pipe 80mm dia single socket6'-0" long with ear weight 18kg)

CARRAIGE OF MATERIALS Aggregate

Cement

Steel

Bricks

Metal

Add GST 18%

Labour Cess 1%

Please Enable Macros to View BoQ information