ADDN/ ALTN TO WALL AND FLOORING NEAR BLDG NO.

Amount

M & L for excavating in trenches n. exc 1.5 m wide and n. exc 1.5 m in depth for foundation etc. n. exc 10 sq m on plan and n. exc 1.5 m in depth and getting out in hard/dense soil complete all as specified.

M & L cement concrete type D-2, 1:4:8 (using 40 mm graded stone aggregate ) as in foundation, filling and mass concrete complete all as specified and directed.

M & L precast solid block mansonry in cement concrete 1:3:6 type C-1 (using 20 mm graded stone aggregate ) in wall exceeding 10 cm in width and built in cement mortar 1:6 all as specified and directed.

M & L for PCC (1:3:6) type C1, using 20 mm graded stone agg as in coping, bands, plinth courses, parapets etc like incl weathering, slightly rounded or chamfered throating complete all as specified and directed

M & L 15 mm thick cement plastering on concrete surfaces in CM (1:4) finising surfaces even and smooth without using extra cement complete all as specified and directed.

M & L for preparation of new wall surfaces (plastered/ unplastered) and applying two coats of exterior emulsion acrylic paint over a coat of primer as per manufacture instruction complete all as specified and directed.

Removing excavated surplus soil at a distance exc 50 m but n. exc 100 m and depositing where directed at a level exc 1.5 m above the starting point all as specified and directed.

Returing, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in hard/ dense soil complete all as specified and directed.

M & L for surfaces dressing n. exc 15 cm deep and getting out in soft/ loose soil compete all as specified and directed.

M & L for hardcore of gauge n. exc 63 mm (broken stone or boulders), deposited, spread and levelled in layers n. exc. 15 cm thick, watered and rammed to a true surface all as specified and directed.

M & L cement concrete type C-2, 1:3:6 (using 40 mm graded stone aggregate ) as in foundation, filling and mass concrete complete all as specified and directed.

M & L machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size conforming to IS 15658-2006 of 60 mm thickness grade with glossy finsh, colour shade as decided by Engineer-in-charge

M & L sand filling under floors or in foundation including watering as required.

Demolition of cement Concrete in flooring and pavings n. exc 15cm thick below or above ground level complete all as specified and directed

M & L 75 mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base of floors all as specified and directed

M&L joint free non skid ceramic coloured tile 7 to 8mm thick(square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match (Size of tile 400mmx400mm) laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Taking down cement plaster on brick or stone walls or concrete surface etc including raking out joints, hacking for key scrubbing down with water all as specified and directed.

M & L for coloured glazed ceramic tiles 350mmx250mm x7mm/450mmx350mmx7mm thick & boarder in vertical surfaces such as skirting , dado etc set & jointed in neat cement slurry & pointed in coloured cement to match fixed including backing coat 10mm thick in CM 1:4 including dismantling old tiles complete as specified and directed

M & L vitrified ceramic coloured tile 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in CM 1:6 including dismantling old tiles complete all as specified and directed.

All as per item No 19 above, but in vertical surfaces such as skirting , dado etc set & jointed in neat cement slurry & pointed in coloured cement to match fixed including backing coat 10mm thick in CM 1:4 including dismantling old tiles complete as specified and directed

S & F in repairs bib cock with wall flange complete as specified and directed by Engr-in-Charge. (make - Jaquar Code No. FON-40037)

S & F in repairs in Angular stop cock with wall flange of 15mm dia capastan head complete as specified and directed by Engr-in-Charge. (make - Jaquar Code No. CON- 40053)

S & F in repair Hand shower(Health Faucet) with 1 metre long PVC tube & wall hook (Code No ALD-563) (Make - Jaquar Cat No. 563)

S & F in repair Soap dispenser with glass bottle of make Jaquar code No. ACN - 1135.

S & F in repair Soap dish holder complete as specified and directed by Engr-in-Charge. (Jaquar Code No CAN-1131N)

S & F in repair Toilet paper roll holder with flap complete as specified and directed by Engr-in-Charge. Make: Jaquar Code No. AKP-35753P

S & F in repair Glass Shelf 600mm long complete as specified and directed by Engr-in-Charge. Make : Jaquar(Code No CAN-1171N)

S & F in repair Single Towel Rail 600mm long complete as specified and directed by Engr-in-Charge. make Jaquar Code No. AQN-7711

S & F in repair Towel Ring complete as specified and directed by Engr-in-Charge. make - Jaquar (Code No AQN-7721)

S & F counter top wash basin size 545 x 545 x180 mm complete as specified and directed by Engr-in-Charge. Make Jaquar Cat Pt No. CNS -WHT-11

S&F in repair 15mm brass CP wall mixer with provision of over head shower with 115 mm long bend pipe and wall flange complete as specified and directed by Engr-in-Charge. Make- Hindware.cat-F100020

S & F in repair center hole basin mixer with popup waste system with 450 mm with all connecting accessories complete all as specified and directed by Engineer-in- charge complete as specified and directed by Engr-in-Charge. Make: Jaquar Cat Pt-CON 167KNB

S & F in repair Bib cock 2 in one complete as specified and directed by Engr-in-Charge. Make : Hindware (Cat No : F200004FT)

Supply and fix in repair overhead showers 105mm dia complete as specified and directed by Engr-in-Charge. (Make Jaquar Cat No OHS-1709)

S&F in repair fancy type curtain rod powder coated 20mm dia (of approved colour and design) including brackets all as specified and directed (As approved by Engr -in-Charge)

M&L for coupled closet (Clover) snow white make Cera along with soft close plastic seat cover cistern dual flush complete set as specified and directed by Engr-in-Charge. Make- CERA Cat No. 2070, 2370 , 2270

S & F cast iron floor trap with grating including jointing to waste pipe in run lead, dia of outlet 75mm fixed in repairs complete as specified and directed by Engr-in-Charge.

Dismantling CI/AC/PVC (SWR) pipes of any description fixed to wall/laid in trenches including making good disturbed portion of wall floor etc all as specified and directed.

S & F in repair 110 mm dia PVC (SWR) pipes, single socketed, in any length with rubber ring joints fixed to wall with and including clamps complete as specified and directed

S & F in repairs 110 mm dia PVC (SWR) bends any radius, provided with access door complete as specified and directed

S & F in repairs PVC (SWR) branch pieces, single (single 'Y') equal or unequal, 110 mm bore provided with access door complete as specified and directed

S & F in repairs PVC (SWR) junction single (single T) equal or unequal 110mm bore, provided with access door complete as specified and directed

S&F in repair 75 mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls with and including clamps complete as specified and directed

S & F in reparis 75 mm dia PVC (SWR) bends any radius provided with access door complete as specified and directed

S & F in repairs PVC (SWR) branch pieces, single (single Y) equal or unequal, 75 mm bore, provided with access door complete as specified and directed

S & F in repairs PVC (SWR) junction single (single T) equal or unequal 75mm bore, provided with access door complete as specified and directed

S & F in repairs 15mm dia steel water tubing medium grade galvanized with and including all fittings such as bend, tees , union etc and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S & F in repairs 20mm dia steel water tubing medium grade galvanized with and including all fittings such as bend, tees , union etc and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S & F in repairs bathroom cabinet mirror of hard thermosetting plastic of size 400x500mm, fitted with superior quality distortion free 4mm thick mirror complete as specified and directed by Engr-in-Charge. . Make Prayag Cat No. 554

S & F in repair CP Towel Rack 24" complete as specified and directed, Make: Jaquar

M & L Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 10 cm but not exc 20 cm girth complete all as specified and directed

S & F in repairs 1mm thick stainless steel kitchen plate rack of size 0.87x1.18m x 0.20 m fixed in repairs complete as specified and directed , Make- Blue star

S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete as specified and directed Make- Blue star

S&F in repair sinks double made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete as specified and directed Make- Blue star

M & L 25 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including cutting of hole if required complete as specified and directed

M&L machine cut cudappa stone slab 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing , over and including 15mm thick screed bed in CM 1:6 and complete all as specified and directed

Taking down chowkats or frames, not exc. 1.50 Sqm each with shutters (without taking off shutters from the frames), complete all as specified and as directed.

M&L 18/19mm thick Pre-laminated board exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination , fixed with screw to timber frame including taking down existing board of any description complete all as specified and directed.

M&L cover fillet (lipping) of tempered hard board 40mm wide, 6mm thick and fixing with screw complete all as specified and directed.

S&F continuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flaps (when open) in 30mm complete all as specified and directed.

S&F 40mm dia cupboard knobs fixed with nut, screws and washers of mild steel bright finish complete all as specified and directed.

S&F 150mm hasp and staple, Brass, wire type stove enamelled, including bolt to hinge plate and fixed with screw.complete all as specified and directed.

S&F PVC Solid Door Frame of Size 50X47mm made out of 5.0mm Plain Colour PVC Sheet Reinforced with Mild Steel Square Tube as specified as per Manufacture’s Instructions complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (stile) consisting of frame made out of mild steel tubes for top and bottom rails, mild steel frame shall be covered with heat moulded Plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rails & bottom rail, panelling of plain colour PVC sheet to be fitted in the mild steel frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement and fixing in the frame at site as per specifications and drawings, complete all as specified and as directed.

S & F 100mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, ISI marked, complete all as specified and as directed.

S & F 150 mm long aluminium handles, cast type anodised all as specified and as directed.

S&F 200 mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and as directed.

S&F250 mm long Aluninium alloy, anodised , sliding door bolt with hasp , staple,(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.4 mm and fixed with tinned tacks of stainless steel wire staples, fixing in repairs etc complete all as specified and as directed.

S & F in repairs Sink cock with wall flange of 15mm dia capstan head complete as specified and directed by Engr-in-Charge. Make Jaquar

M&L rendering 5mm thick on concrete surfaces in CM 1:3 on ceiling, finished even and smooth with sagol including taking down existing plaster complete all as specified and directed.

M&L Preparation of newly plastered or unplastered surfaces on ceiling and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

M&L rendering 15mm thick on stone masonry surfaces in CM 1:6 finished even and smooth with sagol over and including dubbing out average 10mm thick on irregular face of walls in CM 1:6 including taking down plastering of any description complete all as specified and directed.

M&L Preparation of newly plastered or unplastered surfaces on walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

S & F in repair Glass Coner shelf complete as specified and directed

S&F in repairs 4mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares of any size complete all as specified and directed by Engr-in-Charge. Make: Modi Gold

S&F 3mm thick figured glass pin head type and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqmtr each pane including hacking out old existing glass complete all as specified and directed by Engr-in-Charge. Make: Modi Gold

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar all as specified and directed.

S&F for aluminum anodized three track sliding window with two or more shutters with 4 mm thick plane glass, one shutter of stainless steel mosquito proofing with good quality bearing ,handle, lock,etc rubber beading and glazing clips etc using aluminium sections as given in 'JINDAL' catalogue including taking down existing old window with frame of any description complete all as specified and directed by Engr-in-Charge. (a) Bottom frame 20620 (b) Top frame & vertical 20621 (c) Handle (side) 20606 (d) Shutter inter lock 20724 (e) Shutter top & bottom 20844

S&F aluminium anodised louvered ventilator with 4 mm thick pin headed glass and 100 mm wide glass strips, white framed and fixed with aluminium anodised frames etc including taking down existing old window of any description complete all as sspecified and directed. (a) SP 20048 (b) Glazing clips 19352

Taking down copper/aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets etc and removing materials to store for seperately) and making good disturbed surface of walls, floors etc all as specified and directed

Taking down ceiling fans any type/sweep 230 V, AC and refixing after cleaning and making connection complete all as specified and directed

M&L for point wiring for light, fan with 1.5 sqmm PVC insulated (red phase and black for neutral) unsheathed, multi stranded copper conductor 1100 volt grade FRLSH cable in and incl not less than 2mm thick PVC casing/caping with all accessories and 1.5 sqmm green in colour PVC sheathed multistranded copper conductor cable for earth continuity connected to common earth dolly incl PVC box surface/flush type and modular white cover plate with frame all as directed for one light/fan point controlled by on switch all as specified and directed

All as per item No. 84 above, but for 5 pin 5 amps socket outlet on same board with other switches

All as per item No. 84 above, but for 5 pin 5 amps socket outlet on independent board with other switches

All as per item No. 84 above, but with 2.5 sqmm cable and 2.5 sqmm for earth continuity for 6 pin 15 amps socket outlet flush type on independent board

S&F Modular switch 1 way 6 amps 1 module

S&F Modular socket 6A 2/3 pin combined 2 module

S&F ceiling rose on PVC square blocks, 3 phase PVC/polycarbonate isolated body

S&F angle/batten lamp holder on PVC square blocks, PVC/polycarbonate type with back plate suitable for batten fitting

S&F modular fan regulator electronic rotary stepped increase type 2 module 120W

S&F modular sockets 6A/16A, 2/3 pin combined 2 module

S&F modualr switches 2 way 16 amp, 1 module

Supply and fixing on two PVC square blocks surface and wall mounted LED batten 20 watt(LED tube light fitting ) extruded aluminium housing provided for efficeint heat dissipation wth polycarbonate diffuser & integrated electronic driver incl taking down old UNSV one.

Supply and fixing on two PVC square blocks surface and wall mounted LED batten 10 watt(LED mirror tube light fitting) extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic diriver incl taking down old UNSV one all as specified and directed

S&F single pole and neutral encloser with two pin and earth plug and socket complete with one single pole MCB 20 amps

Supply & fix fans ceiling complete with accessories 230 Volt, 1200 mm sweep BEE 5 star rated

Supply and fixing LED lamp 10 watts 230V pin type 230 V 50 Hz as directed.

GB Infrastructures