Electrification in Divisional Office, Snow Clearance Control Room Anantnag at Mechanical and Hospital Division Anantnag.

Description of the Items Supply, Installation, Testing and Commissioning of 18W/+ LED recessed/mounted (round or square) Down lighters having aluminum body, minimum 100lm/w, average life 50000 hours, Operating temperature -10°C to +45°C. Certification: LM79 & LM80 test report should be from govt. approved In-house NABL lab/ government of India. The job includes replacement warranty of fixture if damaged/ burnt out what so ever reason for a period of two years reckoned from the date of successful commissioning/

Supply, Installation, Testing and Commissioning of 120W new generation energy saving and environmental friendly long life L.E.D Flood Light made up of pressure die cast Aluminum housing with high efficiency LEDs as lighting source with efficacy >110lm/w ,CRI>80 ,CCT>5000 ,Average Life L70 50000 hours ,No harmful UV and IR radiators, Operating Temp -10°C to +45°C ,Surge Voltage Protection, IP66 Protection and impact resistance of IK07.The job includes replacement warranty of fixture if damaged/ burnt out what so ever reason for a period of two years reckoned from the date of successful commissioning/ handing over of site to the intending department.

Providing and Fixing M.S. junction box of approved make and suitable size, fabricated from 16 SWG sheet steel, powder-coated, complete with suitable clamps, fitted with 4-pole 32 Amp Bakelite connector and 3–6 Amp MCB, including all required hardware, accessories and proper fixing arrangements, complete in all respects as per site requirement and directions of Engineer-in-Charge.

Providing and Fixing service connection and earthing to luminaire from junction box using 3x1.5 sq.mm PVC insulated, multistrand copper conductor wire , drawn through suitable PVC conduit including all necessary connections, complete in all respects as per direction of Engineer-in-Charge. (48 metres)

Supplying, Laying, Testing and Commissioning of 10 sq mm 2 core unarmored AL cable,1.1 kV grade XLPE insulated, conforming to IS:7098 (Part-1), laid overhead between poles, supported on hot-dip galvanized (GI) bearer wire of 8 SWG, including supply and fixing of GI bearer wire, turnbuckles, eye bolts, clamps, nuts, bolts and washers, binding of cable with PVC ties / GI binding wire at suitable intervals, proper tensioning and alignment, and making of end terminations with suitable aluminum lugs and brass compression glands, complete in all respects as per direction of Engineer-in-Charge. (120 metre)

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 No. 3 pin 5/6 A modular socket outlet and 5/6 A modular switch connections etc. as required.

Wiring for AC/Power plug points (15/16A heating points) with 2x4 sq mm FRLS PVC insulated flexible stranded copper conductor wires in recessed or surface medium class PVC conduit along with 1x4 sq. mm FRLS PVC insulated copper conductor single core cable for earthing, etc. as required excluding the cost of conduit. (75 mertes)

Wiring for 5-10A socket out lets for computer with 2X2.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit, along with 1 No. 2.5 sq. mm FRLS PVC insulated copper conductor single core cable for earthing etc. as required excluding the cost of conduit. (76 metres)

Supplying and fixing of indicators on existing modular plate and switch box, incl. connections, etc. as required.