Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹6.1 LAccepted-AOC | L-1 | Accepted-AOC Awarded | |
| 2 | L-2₹6.5 L+₹35,548.40 (5.78%)Rejected-AOC | L-2 | Rejected-AOC Not awarded |
Tender Value
Refer Docs
EMD Value
₹13,240
Closing Date
27 Jan 2021, 1:00 pmClosed
Executive Engineer
PHED No. 3, Jhajjar
Salhawas Imp of Water Supply Status by Prov and Inst 1 No Boosting Station rising main pipe line at village Salhawas under PHED Jhajjar Distt Jhajjar Installationm and cvommissioning of 2 Nos Tubewell in village Salhawas of size 300mm i/d
2021_HRY_157103_1
Salhawas - Inst and commission of 2 Nos T/Well
Open Tender
Civil Works
Works
90 days
Jhajjar
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,000
₹13,240
24 Feb 2021
20 Jan 2021
27 Jan 2021
20 Jan 2021
27 Jan 2021
20 Jan 2021
Amount
Drilling 300mm dia bore local bocky type machine in all kind of soils and boulders upto dia except rocky strata inclduingg the cost of all consumable stores, fuel, oil, soil stablizing material and transportation of rig and otther accessories to the site of proposed bore and back (including cost of lowering of all sizes of casing pipe while boring and extracting the same against earth frrictions etc.) complete to the satisfaction of the Engineer-in-Charge.
Supplying and lowering 219.10mm outter dia ERW PVC pipes as perr IS 4270/1992 as amended upto date, duly ISI marked forr housing pipe in 6 meters random length and complete in all respect.
Supplying and lowering 219.10mm outter dia ERW PVC pipes as perr IS 4270/1992 as amended upto date, duly ISI marked forr housing pipe in 6 meters random length and complete in all respect.
Development of tubewell according to clause 9.3 of Is: 2800-1991 (Part-1) as amended upto date and specifications attached and as directed by the Engineer-in-Charge of the wok including the cost of all consumable sttores, fuel, oil, compressor, pumps and machinery etc as required for this work. (a) when deloveped by compressor of 1400 CFM 400 PSI and suitable rating of
Supplying and fixingg well threaded M.S. cap for 219.10mm outer dia M.S. pipe as per ISI 226/1975 as amended upto date to the satisfaction of the Engineer-in-Charge.
Supplying as per IS: 226/1975 as amended upto date deodar wooden box made of 20mm thick wood size 60cmx30cmx75cm with lid and locking arrangement etc. for preserving the strata samples received from the bore as and when desirec by the Engineer-in-Charge.
Supplying and fixing 219.10mm M.S. clamp as per IS: 276/1975 as amended upto date for supported on two girders not less than 100mmx150mm weight not less then 17.00kg/m cross section area not less than 21.67 sq. cm. flange thickness 7.00mm, web thickness 5.40m, 2.00 m long (each) embeded in suitable foundation as approved by the Engineer-in-Charge.
Charges for resistively survey complete in all respect to the satisfaction of the Engineer-in-Charge at the proposed site giving results ascertaining quality, quantity of good water with location of water bearing strata and type and depth of geological strata complete in all respect yield of tube well must not be less than 2000 GPH.
Supplying, erection, testing and commissioning of submersible pumping sets as per BIS specification No. 8034-1989 (as amended upto date forr pumps) and IS: 9283-1979 (as amended upto date for motor) the pump motor sets should be capable 300 lpm against 200 mtr. head for Bhalkhi & 300 LPM against 180 mtr. head for Salhawas of pumping clear fresh cold water having Characterustics as specified in Clause 4 of IS: 8034/1989 and Clause4.1 of IS 9283/1979
Providing & fixing of electric control pannel board for tube well in consisting of MS sheet duly painted box type floor mounted made of angle frame containing 1 No. Fully automatic air brake starter suitable for 10.00 HP motor, main switch of suitable range with HRC fuse, 1 No. Volt meter (0 to 500 Volts), 1 No. Amp. Meter of 0 to 50 Amp. 3 sets of indicating lamp, Capacitor of suitable capacity & 1 No. single phase preventors witth the timer switch including wiring in panel board complete in all respect.
Supplying of 50mm i/d G.I. elbow of ISI mark manufactured by UNIK/DRP complete in all respect.
Supplying of GI socket of size 50mm i/d of ISI mark, manufactured by UNIK/DRP complete in all respect.
Supplying & fixing of Brass Heavy Duty Handle Valve/Peet Valve of size 50mm i/d of ISI mark, manufactured by JINDAL/DRP complete in all respect.
Supplying & fixing of GI Reducer of size 100mm x 50mm i/d of ISI mark, manufactured by JINDAL/DRP complete in all respect.
Supplying & fixing of MS NRV of size 50mm i/d of ISI mark manufacture by JINDAL/DRP complete in all respect.
Supplying & fixing of 50mm i/d GI Nipple of size 4" long of ISI mark made by JINDAL/TATA/UNIK/DRP complete in all respect.
Supplying & fixing of 50mm i/d MS Blank Flange complete in all respect.
Bidder Name
Amount
Veer Kumar(GSTN-NA)
Sh. Rahul Kumar contractor(GSTN-NA)
Veer Kumar
Sh. Rahul Kumar contractor
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .