CA NO GE/ND-45/2022-23 SPECIAL REPAIRS TO ROOM NO 70, 72 AND 151C AT KASHMIR HOUSE UNDER GE NEW DELHI

Amount

Removal of existing roof treatment incl under layers of cement screed any thickness incl tiles and taking down debries from roof to ground by mechanical means to avoid any damange to structure and surrounding and disposing off the debris out of MoD land

(a) M&L clean the surface, remove dust dirt, loose particles and unsound substrate and providing 20 mm thick cement screed (1:4) mixed with Dr Fixit or equivalent tonic liquid 200 gram/Bag over Dr Fixit or equivalent as approved by GE. (b) Applying primer coat with solvent based Bitumen primer @ 0.5 ltr/sqm (c ) Dr Fixit or equivalent as approved by GE torch shield water proofing 3mm thick membrane use gas burner to heat substrate, press firmly from lower end to upper and with 100 mm overlap (d) Heat both over lap with round tipped trowel to seal over lap . Excess compound smoothened, pressed into seam using hot trowel (e) Seal edges well into grooves & protect with a poly sulphide sealant. (f) M&L hydraulically pressed burnt clay tiles plain size 300X300X19 mm laid over and including 15mm thick screed in CM 1:4 with WPC & pointed in CM 1:3 mixed with crude oil. (Note 1 :- WPC as per manufacturer's instruction shall be deemed to be included in unit rate quoted.) (Note 2 : Water proofing treatment shall be carried out through approved manufacturer's applicator) (g) Uploading of material shall be carried out by mechanical means, use of staircase is strictly prohibited

Demolition of brick work built in cement mortar or cement lime mortar

M&L brick work with sub class ‘B’ bricks straight or curved on plan exc 6 m mean radius in CM 1:6 with old size bricks

M&L 40 mm thick(avg thickness) cement concrete type B-I, 1:2:4 (20 mm graded agg) in sub-floors, sub-bases, floors and pavings, etc.

M&L providing cement concrete 1:2 :4, type B-1 (20 mm graded aggregate) in roof kerbs or mud stops rounded or chamfered on edges incl form work (straight or curved) complete all as specified & directed

Dismantling water tanks of capacity exc. 250 ltr and n.exc. 500 ltr and removing to store.

S&F 500 Ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR 2010 Pt I complete.

Dismantling wrought or mild steel work of any description not otherwise provided

S&F MS Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

S&F welded steel wire fabric fixed complete to wood or steel member weight n.exc 4 Kg per Sqm

S&F butt hinges 100mm long medium weight cold rolled MS and fixed

M&L for preparation of new steel surface over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer.

Taking down steel tubing and connections of 15 mm bore etc incl cleaning for refixing or removal from site

S&F Steel water tubing of 15mm bore, medium grade, galvanised with all fittings and fixed complete to walls and ceilings or laid in floors

Taking down cement or cement lime plaster on brick or stone walls, etc. incl racking out joints, hacking for key, scrubbing down with water, etc.

M&L for 15 mm thick ready mix plaster on brick or concrete surfaces of walls in two layers (thickness of each layer not more than 10 mm finished even & smooth). The first layer shall be prepared as per manufacturer instructions, relevant IS code and Engineering practices. The complete work of this item shall be executed only by skilled labour of the trade complete all as specified and directed by Engr-in-Charge

M&L 5mm thick Ready mix plaster on concrete surfaces on ceiling finished even and smooth complete all as specified and as directed by Engr-in-Charge

M&L for preparation of newly plastered surface of wall and applying two coat of weather proof exterior emulsion extra premium 100% acrylic emulsion as approved over a coat of primer complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying two coats of oil bound distemper,white or tinted, over a coat of alkali resistant primer complete all as specified and as directed by Engr-in-Charge

M&L for preparation of new plastered surface of ceiling and applying three coat of white wash complete all as specified.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets in any surfaces complete

S&F prelaminated PVC rigid foam sheet wall panelling of 5 mm thickness stuck on inner framework of 35 mm wide strips of 5 mm thick rigid foam sheet. The strips should have a groove of 6 mm width and 2 mm depth for sinking the head of screw used to fix the strips to the wall and should be placed vertically at equal intervals of 300 mm C/C. The PVC strips to be fixed to the wall using 65 mm long MS screws through the groove in the strip by using PVC fasteners incl moulding at columns, windows and doors jambs. Notes:- (a) Work for fixing of wall panelling shall be executed through manufacturer's authorised applicators only under the close supervision of their technical staff. (b) The entire qty of wall panelling and their allied ancillaries shall be procured directly from the manufacturer or their authorised dealer only.

M&L for providing and fixing False ceiling at any height with semi perforated 12mm thick micro tegular edge GRG (Glass Fiber Reinforced Gypsum) false ceiling tiles of size 595x595mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC 0.85 (with 50mm thick glass wool) as per IS 8225 :1987, Non-combustible as per BS 476 (part-4) -1970 and light reflectance of 75-85% to be laid in true horizontal level or in slope as per site requirement suspended on interlocking metal T-Grid of hot dipped galvanised iron section of 0.33mm thickness (galvanised @ 120 grams per sqm including both sides) comprising of main - T runners of size 15x32mm of length 3000mm, cross-T of size 15x32mm of length 1200mm and secondary intermediate cross T of size 15x32m of length 600mm to form grid module of size 600x600mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod up to 1000mm length and L shape level adjuster of size 85x25x2mm. Galvanized iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on periphery wall/partition with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wash SS screws. The work shall be carried out as per specifications, drawing and as per direction of Engineer-in-Charge complete all as specified and directed. Make :Diamond Ceiling/Brand TM/Shera/Maruti Gypsum/Gypcore.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M&L for double charge vitrified tiles, light shade, of area exceeding 0.42 sqm but n exc 1.00 sqm thickness 10 mm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile colour and including 15 mm thick screed bed in cement plaster (1:6) complete all as per specification and directed.

S&F coloured glazed ceramic tiles in vertical surfaces 450 X 350 X 7mm thick tiles set and jointed in neat cement slurry and pointed in white or coloured to match tile colour and incl 15 mm thick rendering in CM 1:4 complete all as per specification and directed.

S&F non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangle) area of each tiles exc 0.11 but n.exc 0.18sqm in floors set and jointed in neat cement slurry and pointed in white /coloured cement laid over and incl 15mm thick screed in CM 1:6 complete all as per specification and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from frames) n. exc 1.50 sqm each

Taking down chowkhats or frames with shutters (without taking off shutters from frames) exc 1.50 sqm but n.exc 4.0 sqm each

S&F powder coated aluminium window incl frame using 63 mm X 38 mm X 1.6 mm chowkhats with 48mm X 48 mm X 1.6mm openable section as in shutter , 5.5 mm thick glass panes of approved make with rubber for fixing glass and including builders hardware such as aluminium handles 100 mm -02 Nos, tower bolts 100 mm 02 Nos, butt hinges SS 100 mm 04 Nos etc complete all a specified and directed by Engr-in-Charge

S&F powder coated aluminium door incl frame using 96.6mm X 44.8 mm X 1.6 mm aluminium chowkhats 84.0 x44.7mmX1.6mm section vertical styles 101.60X44.88X1.6mm rails mounted on floor spring mortice lock vertical type mild steel 100 mm size (Make:Godrej/Harrison) including aluminium powder coated builders hardware 02 Nos tower bolt 150 mm , sliding bolt 300 mm long 01 No, door handles and fittings complete all as specified and directed by Engr-in-Charge bottom panel with 12 mm thick laminated Novapan and top panel with 5.5 mm thick plain/colour glass fixed with snap beading /rubber gasket of suitable size Make of glass:-MODI/ FLOAT/ ATUL

S&F powder coated aluminium door using 96.6mm X 44.8 mm X 1.6 mm aluminium chowkhats 84.0 x44.7mmX1.6mm section vertical styles 101.60X44.88X1.6mm rails including mortice lock vertical type mild steel 100 mm size (Make : Godrej/Harrison) 02 Nos tower bolt 150 mm , door handles, SS butt hinges 125 mm 04 Nos, hydraulic door closer and fittings complete all as specified and directed by Engr-in-Charge bottom panel with 12 mm thick laminated Novapan and top panel with 5.5 mm thick plain glass fixed with snap beading rubber of suitable size Make of glass :MODI/FLOAT/ATUL

S&F aluminium ornamental grill 8mm dia, 75x95mm aperture complete incl U channel complete all as specified and as directed

S&F 100 mm wide Venetian blinds, vertical type incl guide rail, pulling thread etc incl taking down existing pelmets/venetian blinds.

Demolition of cement concrete in ground floor and pavings n.exc 15 cm in thickness below or above ground level

M&L 75mm thick cement concrete type D-2, 1:4:8 (40 mm graded agg) as in sub base complete all as specified

M&L PU Coated cement concrete Paver tiles of size 300x300x25mm set in 15mm thick CM(1:6) including filling joints with white or colour cement as directed.

Demolition of stone slabs and tiles of any description or thickness in floors, wall aprons etc laid dry or dry and pointed

M&L 20mm thick granite(of any type) work (table rubbed and polished) in steps, jambs, pillars ,window-cills, cooking platforms,vertical surface and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

Dismantling boarding of any description , fixed in any position with screws.

S&F powder coated aluminium partition n.exc 1.20 Sqm in each panel using 95.6 mm x 44.8mm x 1.6mm frame work with 12 mm thick exterior grade veneered particle boards with decorative veneers on both faces/5.50 mm thick frosted glass as directed by Engr-in-Charge including aluminium beading for fixing board (Make of GLASS: MODI/ FLOAT/ ATUL).

S&F 18mm thick MDF board pre laminated both side fixed with aluminium screws as in storage cabinet/cub board incl all fittings fixtures and builder hardware etc and the edges shall be covered with PVC banding tape complete all as specified and as directed by Engr-in-Charge, working station etc Make: Kitply/ Green Ply

S &F in repair wash hand basin vitreous china white, flat back of size 550X400 mm including cutting for and pinning in ends of brackets or erecting stand (bracket includes) and making good the surface/joints with white cement complete all as specified and directed

S&F in repairs snow white vitreous china EWC single piece type of size 700X370X645 mm incl seat cover and flush fittings complete fixed in floor with brass screw complete Make : JAQUAR CAT Part No: SLSWHT-6851P or S or equivalent in CERA/HINDWARE complete all as specified and directed by Engr-in-Charge

S&F in repair 125 mm dia CP grating openable type with hinge as per sample over nahani/floor trap including embedding the same in white/coloured cement to match complete all as specified and directed

S&F in repair 15 mm bore fancy type pillar taps cast copper alloy, with capstan heads chromium plated screwed down high pressure with or without letter Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe and fixed

S &F in repair 600 mm long CP connection with CP brass nut & PVC/rubber washer suitable for 15 mm bore pipe/tap complete all as specified and directed.

S&F in repair 15mm bore chromium plated bib cock with wall flange of Jaquar Cat Part No CON 037KN or equivalent complete all as specified and directed

S&F in repair 15 mm bore chromium plated fancy type brass stop valve cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed.

S&F in repair brass chromium plated tubular towel rails 20 mm dia D type ,60 cm long between flanges

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings all as directed by Engr-in-Charge.

S&F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

Taking down carefully old point wiring (Light / Fan/ Socket/ Bell Point ) with aluminium/ copper conductor cable complete including fittings such as ceiling rose, holders, regulators, bell, switch and socket from existing concealed conduits and making good the disturbed surface of wall/ floor complete to match with the existing surface/finishes complete all as specified and as directed.

Material and labour for point wiring with PVC insulated unsheathed multi stranded, single core, FRLS, copper conductor cable of size 1.5 sqmm 1100 Volts including one run of PVC insulated unsheathed multi stranded, single core, FRLS , copper conductor cable of size 1.5 sqmm as earth continuity conductor connected to common earth dolly drawing through PVC concealed conduit but including provision of new galvanised modular concealed box with suitable back & front plate for housing the modular switches, sockets & fan regulators for the following :-

One light/fan point controlled by one No., one way switch.

One 6 Amp socket outlet point controlled by one No., one way switch on same board

One 6 Amp socket outlet point controlled by one No., one way switch on independent board

One 16 Amp socket outlet point controlled by one No., one way switch on independent board with cable of size 2.5 sqmm 1100 Volts including one run of size 1.5 sqmm as earth continuity conductor complete all as specified and as directed. Note : - . (i) No cutting shall be done in the roof for laying PVC conduit for ceiling point wiring. In this specified portion wire shall run through the existing conduit or surface new conduit shall be provided as required. (ii) In case the wiring is encountered with any beam/column, then the wiring will run on surface to avoid any damage to the RCC portion.

S&F modular switch 1 way 6 Amp, SP, one module 230 volts AC complete all as specified and as directed.

S&F modular switch 1 way 16 Amp, SP, one module 230 volts AC complete all as specified and as directed.

S&F modular socket outlet 2/3 pin combined 6 Amp, 230 volts two module AC complete all as specified and as directed.

S&F modular socket outlet 2/3 pin combined 6/16 Amp, 230 volts two module AC complete all as specified and as directed.

S&F modular type electronic fan step regulator 120W, modular type 2 module complete all as specified and as directed.

S&F in replacement Invertor type LED luminaire 600 x 600 mm, 35/36 watts, 220 volts AC recessed type with high efficiency PMMA diffuser, soft glare free light complete with suitable driver, holders & including suitable LED lamp suitable for POP/Gypsum/roof ceiling including connecting up with three core twisted flexible copper conductor cable of suitable size from ceiling rose including cutting of false ceiling in suitable size & making good the disturbed surface & matching with the existing surface complete all as specified. Make- Cat No LEDPLB036/6-0488 OF EVEREADY or equivalent from approved list of makes.

Taking down of submain wiring including taking out conduit pipe of any description and of any size complete all as specified and directed.

S&F submain wiring with PVC insulated unsheathed copper conductor cable, multi stranded, single core, FRLS type, 1100 volts grade 2 x 10 sqmm complete drawn along with 1x 10 sqmm PVC insulated unsheathed copper conductor cable, multi stranded, single core, FRLS type in PVC conduit for continuous earth wire and connected to common earth dolly complete all as specified and directed. Note :- Two run of 10 sqmm copper conductor cable, one run of 10.0 sqmm copper cable and one run of PVC conduit shall be measured as one unit length

All as per item No 64.00 here-in-before but size of cable 2 x6 sqmm complete along with cable 1x 6 sqmm FRLS type for continuous earth wire and connected to common earth dolly complete all as specified and directed. Note :- Two run of 6.0 sqmm copper conductor cable,one run of 6.0 sqmm copper cable and one run of PVC conduit shall be measured as one unit length

All as per item No 64.00 here-in-before but size of cable 2 x 4 sqmm complete along with cable 1x4 sqmm FRLS type for continuous earth wire and connected to common earth dolly complete all as specified and directed. Note :- Two run of 4 sqmm copper conductor cable,one run of 4 sqmm copper cable and one run of PVC conduit shall be measured as one unit length

Supply and fix in replacement of factory made concealed sheet steel distribution boards, double door, SPN, 12 way, 230 volts AC, IP 43 with suitable busbar, neutral link, earth link suitable for MCB, DP/SPN as incomer & MCB SP as outgoing complete all as specified and directed.

Supply and Fix in replacement factory made load line DB's double door made out of CRCA mild steel sheet with insulating materials like polyester epoxy coated surface mounting 12 way TPN 415 Volts, IP 43 with suitable busbar, neutral link & earth link suitable for MCCB TP as incomer & MCB SP/TP as outgoing complete all as specified and directed. Note : Rate of MCCB TPN 125 Amp included in the quoted rate

Supply and fix in replacement MCB SP 5-32 Amp, 10kA complete all as specified and directed.

Supply and fix in replacement MCB SPN 40-63 Amp, 10kA complete all as specified and directed.

Supply & fix in replacement Modular AC box complete with MCB 20-32 Amp, 230 volts AC complete all as specified and directed.

Taking down ceiling fan of any sweep and any make, dismantling of blades, transportation to MES store yard

S & F ceiling fan 1200 mm with 5 ft tie rod ,canopy,u clamp,white colour copper wounded motor ,white colour complete all as specified and directed

Taking down indoor of split type AC upto 2.0 TR and deposit it to MES store ,maintain the surface as per existing including painting and putty work complete all as specified and directed

Refixing the indoor of split type AC after servicing by making proper hole in the wall and connecting the out door complete all as specified

Supply& Fixing of PVC drain pipe compete with fittings, supports as per specification Size: 25 MM Diameter

Supply & fixing of interconnecting copper refrigerant pipe work duly insulated with elastomeric nitrile rubber type tubular insulation and interconnecting copper conductor PVC insulated cable as per OEM specs between indoor & outdoor units as per Size: 5/8" and 3/8"

M&L for 3 core cable size 4sqmm/6sqmm as per site requirement, FRLS type for continuous earth wire and duly connected to common earth dolly complete all as specified and directed.

M&L for laying of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 35 sq. mm, 4 core complete all as specified and directed.

VIJAY KUMAR GUPTA

R D ENTERPRISES

RAJDHANI ENTERPRISES

BEHAL TRADERS